audk/MdePkg/Include/Ppi/Smbus2.h

/** @file
  This file declares Smbus2 PPI.

  Copyright (c) 2006 - 2007, Intel Corporation                                                         
  All rights reserved. This program and the accompanying materials                          
  are licensed and made available under the terms and conditions of the BSD License         
  which accompanies this distribution.  The full text of the license may be found at        
  http://opensource.org/licenses/bsd-license.php                                            

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

  @par Revision Reference:
  This PPI is defined in PI.
  Version 1.00

**/

#ifndef _PEI_SMBUS2_PPI_H
#define _PEI_SMBUS2_PPI_H

#include <IndustryStandard/SmBus.h>

#define EFI_PEI_SMBUS2_PPI_GUID \
  { 0x9ca93627, 0xb65b, 0x4324, { 0xa2, 0x2, 0xc0, 0xb4, 0x61, 0x76, 0x45, 0x43 } }


typedef struct _EFI_PEI_SMBUS2_PPI EFI_PEI_SMBUS2_PPI;

//
// EFI_SMBUS_DEVICE_COMMAND
//
typedef UINTN   EFI_SMBUS_DEVICE_COMMAND;


/*
  Executes an SMBus operation to an SMBus controller.

  @param  This            A pointer to the EFI_PEI_SMBUS2_PPI instance.
  @param  SlaveAddress    The SMBUS hardware address to which the SMBUS device is preassigned or
                          allocated.
  @param  Command         This command is transmitted by the SMBus host controller to the SMBus slave 
                          device and the interpretation is SMBus slave device specific. 
                          It can mean the offset to a list of functions inside 
                          an SMBus slave device. Not all operations or slave devices support
                          this command's registers.

  @param  Operation       Signifies which particular SMBus hardware protocol instance that it 
                          will use to execute the SMBus transactions. 
                          This SMBus hardware protocol is defined by the System Management Bus (SMBus) 
                          Specification and is not related to UEFI.

  @param  PecCheck        Defines if Packet Error Code (PEC) checking is required for this operation.

  @param  Length          Signifies the number of bytes that this operation will do. 
                          The maximum number of bytes can be revision specific and operation specific.
                          This parameter will contain the actual number of bytes that are executed
                          for this operation. Not all operations require this argument.

  @param  Buffer          Contains the value of data to execute to the SMBus slave device. 
                          Not all operations require this argument. 
                          The length of this buffer is identified by Length.


  @retval EFI_SUCCESS           The last data that was returned from the access
                                matched the poll exit criteria.
  @retval EFI_CRC_ERROR         The checksum is not correct (PEC is incorrect)
  @retval EFI_TIMEOUT           Timeout expired before the operation was completed.
                                Timeout is determined by the SMBus host controller device.
  @retval EFI_OUT_OF_RESOURCES  The request could not be completed
                                due to a lack of resources.
  @retval EFI_DEVICE_ERROR      The request was not completed because
                                a failure reflected in the Host Status Register bit.
  @retval EFI_INVALID_PARAMETER Operation is not defined in EFI_SMBUS_OPERATION.
                                Or Length/Buffer is NULL for operations except for EfiSmbusQuickRead and
                                EfiSmbusQuickWrite. Length is outside the range of valid values.
  @retval EFI_UNSUPPORTED       The SMBus operation or PEC is not supported.
  @retval EFI_BUFFER_TOO_SMALL  Buffer is not sufficient for this operation.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_PEI_SMBUS2_PPI_EXECUTE_OPERATION) (
  IN CONST  EFI_PEI_SMBUS2_PPI        *This,
  IN CONST  EFI_SMBUS_DEVICE_ADDRESS  SlaveAddress,
  IN CONST  EFI_SMBUS_DEVICE_COMMAND  Command,
  IN CONST  EFI_SMBUS_OPERATION       Operation,
  IN CONST  BOOLEAN                   PecCheck,
  IN OUT    UINTN                     *Length,
  IN OUT    VOID                      *Buffer
);

/**
  CallBack function can be registered in EFI_PEI_SMBUS_PPI_NOTIFY.

  @param  This           A pointer to the EFI_PEI_SMBUS_PPI instance.
  @param  SlaveAddress   The SMBUS hardware address to which the SMBUS
                         device is preassigned or allocated.
  @param  Data           Data of the SMBus host notify command that
                         the caller wants to be called.

  @return Status Code

**/
typedef
EFI_STATUS
(EFIAPI *EFI_PEI_SMBUS_NOTIFY2_FUNCTION) (
  IN CONST  EFI_PEI_SMBUS2_PPI        *SmbusPpi,
  IN CONST  EFI_SMBUS_DEVICE_ADDRESS  SlaveAddress,
  IN CONST  UINTN                     Data
);
/**
  The ArpDevice() function enumerates the entire bus or enumerates a specific 
  device that is identified by SmbusUdid. 

  @param  This           A pointer to the EFI_PEI_SMBUS_PPI instance.
  @param  ArpAll         A Boolean expression that indicates if the host drivers need
                         to enumerate all the devices or enumerate only the device that is identified
                         by SmbusUdid. If ArpAll is TRUE, SmbusUdid and SlaveAddress are optional.
                         If ArpAll is FALSE, ArpDevice will enumerate SmbusUdid and the address
                         will be at SlaveAddress.
  @param  SmbusUdid      The targeted SMBus Unique Device Identifier (UDID).
                         The UDID may not exist for SMBus devices with fixed addresses.
  @param  SlaveAddress   The new SMBus address for the slave device for
                         which the operation is targeted.

  @retval EFI_SUCCESS           The SMBus slave device address was set.
  @retval EFI_INVALID_PARAMETER SlaveAddress is NULL.
  @retval EFI_OUT_OF_RESOURCES  The request could not be completed
                                due to a lack of resources.
  @retval EFI_TIMEOUT           The SMBus slave device did not respond.
  @retval EFI_DEVICE_ERROR      The request was not completed because the transaction failed.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_PEI_SMBUS2_PPI_ARP_DEVICE) (
  IN CONST  EFI_PEI_SMBUS2_PPI        *This,
  IN CONST  BOOLEAN                   ArpAll,
  IN CONST  EFI_SMBUS_UDID            *SmbusUdid, OPTIONAL
  IN OUT    EFI_SMBUS_DEVICE_ADDRESS  *SlaveAddress OPTIONAL
);


typedef struct {
  EFI_SMBUS_DEVICE_ADDRESS  SmbusDeviceAddress;
  EFI_SMBUS_UDID            SmbusDeviceUdid;
} EFI_SMBUS_DEVICE_MAP;

/**
  The GetArpMap() function returns the mapping of all the SMBus devices 
  that are enumerated by the SMBus host driver. 

  @param  This           A pointer to the EFI_PEI_SMBUS_PPI instance.
  @param  Length         Size of the buffer that contains the SMBus device map.
  @param  SmbusDeviceMap The pointer to the device map as enumerated
                         by the SMBus controller driver.

  @retval EFI_SUCCESS           The device map was returned correctly in the buffer.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_PEI_SMBUS2_PPI_GET_ARP_MAP) (
  IN CONST  EFI_PEI_SMBUS2_PPI    *This,
  IN OUT    UINTN                 *Length,
  IN OUT    EFI_SMBUS_DEVICE_MAP  **SmbusDeviceMap
);


/**
  The Notify() function registers all the callback functions to allow the 
  bus driver to call these functions when the SlaveAddress/Data pair happens.

  @param  PeiServices    A pointer to the system PEI Services Table.
  @param  This           A pointer to the EFI_PEI_SMBUS_PPI instance.
  @param  SlaveAddress   Address that the host controller detects as
                         sending a message and calls all the registered functions.
  @param  Data           Data that the host controller detects as sending a message
                         and calls all the registered functions.
  @param  NotifyFunction The function to call when the bus driver
                         detects the SlaveAddress and Data pair.

  @retval EFI_SUCCESS           NotifyFunction has been registered.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_PEI_SMBUS2_PPI_NOTIFY) (
  IN CONST  EFI_PEI_SMBUS2_PPI              *This,
  IN CONST  EFI_SMBUS_DEVICE_ADDRESS        SlaveAddress,
  IN CONST  UINTN                           Data,
  IN CONST  EFI_PEI_SMBUS_NOTIFY2_FUNCTION  NotifyFunction
);

/**
  @par Ppi Description:
  Provides the basic I/O interfaces that a PEIM uses to access 
  its SMBus controller and the slave devices attached to it.

  @param Execute
  Executes the SMBus operation to an SMBus slave device.

  @param ArpDevice
  Allows an SMBus 2.0 device(s) to be Address Resolution Protocol (ARP)

  @param GetArpMap
  Allows a PEIM to retrieve the address that was allocated by the SMBus 
  host controller during enumeration/ARP.

  @param Notify
  Allows a driver to register for a callback to the SMBus host 
  controller driver when the bus issues a notification to the bus controller PEIM.

  @param Identifier
  Identifier which uniquely identifies this SMBus controller in a system.

**/
struct _EFI_PEI_SMBUS2_PPI {
  EFI_PEI_SMBUS2_PPI_EXECUTE_OPERATION  Execute;
  EFI_PEI_SMBUS2_PPI_ARP_DEVICE         ArpDevice;
  EFI_PEI_SMBUS2_PPI_GET_ARP_MAP        GetArpMap;
  EFI_PEI_SMBUS2_PPI_NOTIFY             Notify;
  EFI_GUID                              Identifier;
};

extern EFI_GUID gEfiPeiSmbus2PpiGuid;

#endif