audk/UefiCpuPkg/Library/MpInitLib/AmdSev.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

280 lines
6.9 KiB
C
Raw Normal View History

/** @file
CPU MP Initialize helper function for AMD SEV.
Copyright (c) 2021, AMD Inc. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#include "MpLib.h"
#include <Library/CcExitLib.h>
/**
Get Protected mode code segment with 16-bit default addressing
from current GDT table.
@return Protected mode 16-bit code segment value.
**/
STATIC
UINT16
GetProtectedMode16CS (
VOID
)
{
IA32_DESCRIPTOR GdtrDesc;
IA32_SEGMENT_DESCRIPTOR *GdtEntry;
UINTN GdtEntryCount;
UINT16 Index;
Index = (UINT16)-1;
AsmReadGdtr (&GdtrDesc);
GdtEntryCount = (GdtrDesc.Limit + 1) / sizeof (IA32_SEGMENT_DESCRIPTOR);
GdtEntry = (IA32_SEGMENT_DESCRIPTOR *)GdtrDesc.Base;
for (Index = 0; Index < GdtEntryCount; Index++) {
if ((GdtEntry->Bits.L == 0) &&
(GdtEntry->Bits.DB == 0) &&
(GdtEntry->Bits.Type > 8))
{
break;
}
GdtEntry++;
}
ASSERT (Index != GdtEntryCount);
return Index * 8;
}
/**
Get Protected mode code segment with 32-bit default addressing
from current GDT table.
@return Protected mode 32-bit code segment value.
**/
STATIC
UINT16
GetProtectedMode32CS (
VOID
)
{
IA32_DESCRIPTOR GdtrDesc;
IA32_SEGMENT_DESCRIPTOR *GdtEntry;
UINTN GdtEntryCount;
UINT16 Index;
Index = (UINT16)-1;
AsmReadGdtr (&GdtrDesc);
GdtEntryCount = (GdtrDesc.Limit + 1) / sizeof (IA32_SEGMENT_DESCRIPTOR);
GdtEntry = (IA32_SEGMENT_DESCRIPTOR *)GdtrDesc.Base;
for (Index = 0; Index < GdtEntryCount; Index++) {
if ((GdtEntry->Bits.L == 0) &&
(GdtEntry->Bits.DB == 1) &&
(GdtEntry->Bits.Type > 8))
{
break;
}
GdtEntry++;
}
ASSERT (Index != GdtEntryCount);
return Index * 8;
}
/**
Reset an AP when in SEV-ES mode.
If successful, this function never returns.
@param[in] Ghcb Pointer to the GHCB
@param[in] CpuMpData Pointer to CPU MP Data
**/
VOID
MpInitLibSevEsAPReset (
IN GHCB *Ghcb,
IN CPU_MP_DATA *CpuMpData
)
{
EFI_STATUS Status;
UINTN ProcessorNumber;
UINT16 Code16, Code32;
AP_RESET *APResetFn;
UINTN BufferStart;
UINTN StackStart;
Status = GetProcessorNumber (CpuMpData, &ProcessorNumber);
ASSERT_EFI_ERROR (Status);
Code16 = GetProtectedMode16CS ();
Code32 = GetProtectedMode32CS ();
APResetFn = (AP_RESET *)(CpuMpData->WakeupBufferHigh + CpuMpData->AddressMap.SwitchToRealNoNxOffset);
BufferStart = CpuMpData->MpCpuExchangeInfo->BufferStart;
StackStart = CpuMpData->SevEsAPResetStackStart -
(AP_RESET_STACK_SIZE * ProcessorNumber);
//
// This call never returns.
//
APResetFn (BufferStart, Code16, Code32, StackStart);
}
/**
Allocate the SEV-ES AP jump table buffer.
@param[in, out] CpuMpData The pointer to CPU MP Data structure.
**/
VOID
AllocateSevEsAPMemory (
IN OUT CPU_MP_DATA *CpuMpData
)
{
if (CpuMpData->SevEsAPBuffer == (UINTN)-1) {
CpuMpData->SevEsAPBuffer =
CpuMpData->SevEsIsEnabled ? GetSevEsAPMemory () : 0;
}
}
/**
Program the SEV-ES AP jump table buffer.
@param[in] SipiVector The SIPI vector used for the AP Reset
**/
VOID
SetSevEsJumpTable (
IN UINTN SipiVector
)
{
SEV_ES_AP_JMP_FAR *JmpFar;
UINT32 Offset, InsnByte;
UINT8 LoNib, HiNib;
JmpFar = (SEV_ES_AP_JMP_FAR *)(UINTN)FixedPcdGet32 (PcdSevEsWorkAreaBase);
ASSERT (JmpFar != NULL);
//
// Obtain the address of the Segment/Rip location in the workarea.
// This will be set to a value derived from the SIPI vector and will
// be the memory address used for the far jump below.
//
Offset = FixedPcdGet32 (PcdSevEsWorkAreaBase);
Offset += sizeof (JmpFar->InsnBuffer);
LoNib = (UINT8)Offset;
HiNib = (UINT8)(Offset >> 8);
//
// Program the workarea (which is the initial AP boot address) with
// far jump to the SIPI vector (where XX and YY represent the
// address of where the SIPI vector is stored.
//
// JMP FAR [CS:XXYY] => 2E FF 2E YY XX
//
InsnByte = 0;
JmpFar->InsnBuffer[InsnByte++] = 0x2E; // CS override prefix
JmpFar->InsnBuffer[InsnByte++] = 0xFF; // JMP (FAR)
JmpFar->InsnBuffer[InsnByte++] = 0x2E; // ModRM (JMP memory location)
JmpFar->InsnBuffer[InsnByte++] = LoNib; // YY offset ...
JmpFar->InsnBuffer[InsnByte++] = HiNib; // XX offset ...
//
// Program the Segment/Rip based on the SIPI vector (always at least
// 16-byte aligned, so Rip is set to 0).
//
JmpFar->Rip = 0;
JmpFar->Segment = (UINT16)(SipiVector >> 4);
}
/**
The function puts the AP in halt loop.
@param[in] CpuMpData The pointer to CPU MP Data structure.
**/
VOID
SevEsPlaceApHlt (
CPU_MP_DATA *CpuMpData
)
{
MSR_SEV_ES_GHCB_REGISTER Msr;
GHCB *Ghcb;
UINT64 Status;
BOOLEAN DoDecrement;
BOOLEAN InterruptState;
DoDecrement = (BOOLEAN)(CpuMpData->InitFlag == ApInitConfig);
while (TRUE) {
Msr.GhcbPhysicalAddress = AsmReadMsr64 (MSR_SEV_ES_GHCB);
Ghcb = Msr.Ghcb;
CcExitVmgInit (Ghcb, &InterruptState);
if (DoDecrement) {
DoDecrement = FALSE;
//
// Perform the delayed decrement just before issuing the first
// VMGEXIT with AP_RESET_HOLD.
//
InterlockedDecrement ((UINT32 *)&CpuMpData->MpCpuExchangeInfo->NumApsExecuting);
}
Status = CcExitVmgExit (Ghcb, SVM_EXIT_AP_RESET_HOLD, 0, 0);
if ((Status == 0) && (Ghcb->SaveArea.SwExitInfo2 != 0)) {
CcExitVmgDone (Ghcb, InterruptState);
break;
}
CcExitVmgDone (Ghcb, InterruptState);
}
//
// Awakened in a new phase? Use the new CpuMpData
//
if (CpuMpData->NewCpuMpData != NULL) {
CpuMpData = CpuMpData->NewCpuMpData;
}
MpInitLibSevEsAPReset (Ghcb, CpuMpData);
}
UefiCpuPkg/MpInitLib: use BSP to do extended topology check During AP bringup, just after switching to long mode, APs will do some cpuid calls to verify that the extended topology leaf (0xB) is available so they can fetch their x2 APIC IDs from it. In the case of SEV-ES, these cpuid instructions must be handled by direct use of the GHCB MSR protocol to fetch the values from the hypervisor, since a #VC handler is not yet available due to the AP's stack not being set up yet. For SEV-SNP, rather than relying on the GHCB MSR protocol, it is expected that these values would be obtained from the SEV-SNP CPUID table instead. The actual x2 APIC ID (and 8-bit APIC IDs) would still be fetched from hypervisor using the GHCB MSR protocol however, so introducing support for the SEV-SNP CPUID table in that part of the AP bring-up code would only be to handle the checks/validation of the extended topology leaf. Rather than introducing all the added complexity needed to handle these checks via the CPUID table, instead let the BSP do the check in advance, since it can make use of the #VC handler to avoid the need to scan the SNP CPUID table directly, and add a flag in ExchangeInfo to communicate the result of this check to APs. Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Min Xu <min.m.xu@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Erdem Aktas <erdemaktas@google.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Ray Ni <ray.ni@intel.com> Suggested-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
2021-12-09 04:27:55 +01:00
/**
The function fills the exchange data for the AP.
@param[in] ExchangeInfo The pointer to CPU Exchange Data structure
**/
VOID
FillExchangeInfoDataSevEs (
IN volatile MP_CPU_EXCHANGE_INFO *ExchangeInfo
)
{
UINT32 StdRangeMax;
AsmCpuid (CPUID_SIGNATURE, &StdRangeMax, NULL, NULL, NULL);
if (StdRangeMax >= CPUID_EXTENDED_TOPOLOGY) {
CPUID_EXTENDED_TOPOLOGY_EBX ExtTopoEbx;
AsmCpuid (CPUID_EXTENDED_TOPOLOGY, NULL, &ExtTopoEbx.Uint32, NULL, NULL);
ExchangeInfo->ExtTopoAvail = !!ExtTopoEbx.Bits.LogicalProcessors;
}
}
UefiCpuPkg: Create MpHandOff. Initially, the purpose of the Hob was twofold: it served as a way to transfer information from PEI to DXE. However, during the DXE phase, only a few fields from the CPU_MP_DATA which collected in PEI phase were needed. A new Hob was specifically created to transfer information to the DXE phase. This new Hob contained only the essential fields required for reuse in DXE. For instance, instead of directly including the BspNumber in MpHandOff, the DXE phase introduced the use of GetBspNumber() to collect the BspNumber from ApicID and CpuCount. The SaveCpuMpData() function was updated to construct the MP_HAND_OFF Hob. Additionally, the function introduced the MP_HAND_OFF_SIGNAL, which solely served the purpose of awakening the APs and transitioning their context from PEI to DXE. The WaitLoopExecutionMode field indicated whether the bit mode of PEI matched that of DXE. Both of them were filled only if the ApLoopMode was not ApInHltLoop. In the case of ApInHltLoop, it remained necessary to wake up the APs using the init-sipi-sipi sequence. This improvement still allow INIT-SIPI-SIPI even APs are wait in Run/Mwait loop mode. The function GetMpHandOffHob() was added to facilitate access to the collected MpHandOff in the DXE phase. The CpuMpData in the DXE phase was updated by gathering information from MpHandOff. Since MpHandOff replaced the usage of OldCpuMpData and contained essential information from the PEI phase to the DXE phase. AmdSevUpdateCpuMpData was included to maintain the original implementation of AmdSev, ensuring that OldCpuMpData->NewCpuMpData pointed to CpuMpData. Tested-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
2023-06-28 10:47:22 +02:00
/**
Get pointer to CPU MP Data structure from GUIDed HOB.
@param[in] CpuMpData The pointer to CPU MP Data structure.
**/
VOID
AmdSevUpdateCpuMpData (
IN CPU_MP_DATA *CpuMpData
)
{
CPU_MP_DATA *OldCpuMpData;
OldCpuMpData = GetCpuMpDataFromGuidedHob ();
OldCpuMpData->NewCpuMpData = CpuMpData;
}