audk/MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterGraphics.c

594 lines
23 KiB
C
Raw Normal View History

/** @file
Support for Graphics output spliter.
Copyright (c) 2006 - 2009, Intel Corporation. <BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "ConSplitter.h"
CHAR16 mCrLfString[3] = { CHAR_CARRIAGE_RETURN, CHAR_LINEFEED, CHAR_NULL };
/**
Returns information for an available graphics mode that the graphics device
and the set of active video output devices supports.
@param This The EFI_GRAPHICS_OUTPUT_PROTOCOL instance.
@param ModeNumber The mode number to return information on.
@param SizeOfInfo A pointer to the size, in bytes, of the Info buffer.
@param Info A pointer to callee allocated buffer that returns information about ModeNumber.
@retval EFI_SUCCESS Mode information returned.
@retval EFI_BUFFER_TOO_SMALL The Info buffer was too small.
@retval EFI_DEVICE_ERROR A hardware error occurred trying to retrieve the video mode.
@retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
@retval EFI_INVALID_PARAMETER One of the input args was NULL.
@retval EFI_OUT_OF_RESOURCES No resource available.
**/
EFI_STATUS
EFIAPI
ConSplitterGraphicsOutputQueryMode (
IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
IN UINT32 ModeNumber,
OUT UINTN *SizeOfInfo,
OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION **Info
)
{
TEXT_OUT_SPLITTER_PRIVATE_DATA *Private;
if (This == NULL || Info == NULL || SizeOfInfo == NULL || ModeNumber >= This->Mode->MaxMode) {
return EFI_INVALID_PARAMETER;
}
//
// retrieve private data
//
Private = GRAPHICS_OUTPUT_SPLITTER_PRIVATE_DATA_FROM_THIS (This);
if (Private->HardwareNeedsStarting) {
return EFI_NOT_STARTED;
}
*Info = AllocatePool (sizeof (EFI_GRAPHICS_OUTPUT_MODE_INFORMATION));
if (*Info == NULL) {
return EFI_OUT_OF_RESOURCES;
}
*SizeOfInfo = sizeof (EFI_GRAPHICS_OUTPUT_MODE_INFORMATION);
CopyMem (*Info, &Private->GraphicsOutputModeBuffer[ModeNumber], *SizeOfInfo);
return EFI_SUCCESS;
}
/**
Set the video device into the specified mode and clears the visible portions of
the output display to black.
@param This The EFI_GRAPHICS_OUTPUT_PROTOCOL instance.
@param ModeNumber Abstraction that defines the current video mode.
@retval EFI_SUCCESS The graphics mode specified by ModeNumber was selected.
@retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
@retval EFI_UNSUPPORTED ModeNumber is not supported by this device.
@retval EFI_OUT_OF_RESOURCES No resource available.
**/
EFI_STATUS
EFIAPI
ConSplitterGraphicsOutputSetMode (
IN EFI_GRAPHICS_OUTPUT_PROTOCOL * This,
IN UINT32 ModeNumber
)
{
EFI_STATUS Status;
TEXT_OUT_SPLITTER_PRIVATE_DATA *Private;
UINTN Index;
EFI_STATUS ReturnStatus;
EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *Mode;
EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
UINTN NumberIndex;
UINTN SizeOfInfo;
EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *Info;
EFI_UGA_DRAW_PROTOCOL *UgaDraw;
if (ModeNumber >= This->Mode->MaxMode) {
return EFI_UNSUPPORTED;
}
Private = GRAPHICS_OUTPUT_SPLITTER_PRIVATE_DATA_FROM_THIS (This);
Mode = &Private->GraphicsOutputModeBuffer[ModeNumber];
ReturnStatus = EFI_SUCCESS;
//
// return the worst status met
//
for (Index = 0; Index < Private->CurrentNumberOfConsoles; Index++) {
GraphicsOutput = Private->TextOutList[Index].GraphicsOutput;
if (GraphicsOutput != NULL) {
//
// Find corresponding ModeNumber of this GraphicsOutput instance
//
for (NumberIndex = 0; NumberIndex < GraphicsOutput->Mode->MaxMode; NumberIndex ++) {
Status = GraphicsOutput->QueryMode (GraphicsOutput, (UINT32) NumberIndex, &SizeOfInfo, &Info);
if (EFI_ERROR (Status)) {
return Status;
}
if ((Info->HorizontalResolution == Mode->HorizontalResolution) && (Info->VerticalResolution == Mode->VerticalResolution)) {
FreePool (Info);
break;
}
FreePool (Info);
}
Status = GraphicsOutput->SetMode (GraphicsOutput, (UINT32) NumberIndex);
if (EFI_ERROR (Status)) {
ReturnStatus = Status;
}
} else if (FeaturePcdGet (PcdUgaConsumeSupport)) {
UgaDraw = Private->TextOutList[Index].UgaDraw;
if (UgaDraw != NULL) {
Status = UgaDraw->SetMode (
UgaDraw,
Mode->HorizontalResolution,
Mode->VerticalResolution,
32,
60
);
if (EFI_ERROR (Status)) {
ReturnStatus = Status;
}
}
}
}
This->Mode->Mode = ModeNumber;
CopyMem (This->Mode->Info, &Private->GraphicsOutputModeBuffer[ModeNumber], This->Mode->SizeOfInfo);
//
// Information is not enough here, so the following items remain unchanged:
// GraphicsOutputMode->Info->Version, GraphicsOutputMode->Info->PixelFormat
// GraphicsOutputMode->SizeOfInfo, GraphicsOutputMode->FrameBufferBase, GraphicsOutputMode->FrameBufferSize
// These items will be initialized/updated when a new GOP device is added into ConsoleSplitter.
//
Private->HardwareNeedsStarting = FALSE;
return ReturnStatus;
}
/**
The following table defines actions for BltOperations.
EfiBltVideoFill - Write data from the BltBuffer pixel (SourceX, SourceY)
directly to every pixel of the video display rectangle
(DestinationX, DestinationY)
(DestinationX + Width, DestinationY + Height).
Only one pixel will be used from the BltBuffer. Delta is NOT used.
EfiBltVideoToBltBuffer - Read data from the video display rectangle
(SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in
the BltBuffer rectangle (DestinationX, DestinationY )
(DestinationX + Width, DestinationY + Height). If DestinationX or
DestinationY is not zero then Delta must be set to the length in bytes
of a row in the BltBuffer.
EfiBltBufferToVideo - Write data from the BltBuffer rectangle
(SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the
video display rectangle (DestinationX, DestinationY)
(DestinationX + Width, DestinationY + Height). If SourceX or SourceY is
not zero then Delta must be set to the length in bytes of a row in the
BltBuffer.
EfiBltVideoToVideo - Copy from the video display rectangle
(SourceX, SourceY) (SourceX + Width, SourceY + Height) .
to the video display rectangle (DestinationX, DestinationY)
(DestinationX + Width, DestinationY + Height).
The BltBuffer and Delta are not used in this mode.
@param This Protocol instance pointer.
@param BltBuffer Buffer containing data to blit into video buffer.
This buffer has a size of
Width*Height*sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
@param BltOperation Operation to perform on BlitBuffer and video
memory
@param SourceX X coordinate of source for the BltBuffer.
@param SourceY Y coordinate of source for the BltBuffer.
@param DestinationX X coordinate of destination for the BltBuffer.
@param DestinationY Y coordinate of destination for the BltBuffer.
@param Width Width of rectangle in BltBuffer in pixels.
@param Height Hight of rectangle in BltBuffer in pixels.
@param Delta OPTIONAL.
@retval EFI_SUCCESS The Blt operation completed.
@retval EFI_INVALID_PARAMETER BltOperation is not valid.
@retval EFI_DEVICE_ERROR A hardware error occured writting to the video
buffer.
**/
EFI_STATUS
EFIAPI
ConSplitterGraphicsOutputBlt (
IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, OPTIONAL
IN EFI_GRAPHICS_OUTPUT_BLT_OPERATION BltOperation,
IN UINTN SourceX,
IN UINTN SourceY,
IN UINTN DestinationX,
IN UINTN DestinationY,
IN UINTN Width,
IN UINTN Height,
IN UINTN Delta OPTIONAL
)
{
EFI_STATUS Status;
EFI_STATUS ReturnStatus;
TEXT_OUT_SPLITTER_PRIVATE_DATA *Private;
UINTN Index;
EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
EFI_UGA_DRAW_PROTOCOL *UgaDraw;
Private = GRAPHICS_OUTPUT_SPLITTER_PRIVATE_DATA_FROM_THIS (This);
ReturnStatus = EFI_SUCCESS;
//
// return the worst status met
//
for (Index = 0; Index < Private->CurrentNumberOfConsoles; Index++) {
GraphicsOutput = Private->TextOutList[Index].GraphicsOutput;
if (GraphicsOutput != NULL) {
Status = GraphicsOutput->Blt (
GraphicsOutput,
BltBuffer,
BltOperation,
SourceX,
SourceY,
DestinationX,
DestinationY,
Width,
Height,
Delta
);
if (EFI_ERROR (Status)) {
ReturnStatus = Status;
} else if (BltOperation == EfiBltVideoToBltBuffer) {
//
// Only need to read the data into buffer one time
//
return EFI_SUCCESS;
}
}
UgaDraw = Private->TextOutList[Index].UgaDraw;
if (UgaDraw != NULL && FeaturePcdGet (PcdUgaConsumeSupport)) {
Status = UgaDraw->Blt (
UgaDraw,
(EFI_UGA_PIXEL *) BltBuffer,
(EFI_UGA_BLT_OPERATION) BltOperation,
SourceX,
SourceY,
DestinationX,
DestinationY,
Width,
Height,
Delta
);
if (EFI_ERROR (Status)) {
ReturnStatus = Status;
} else if (BltOperation == EfiBltVideoToBltBuffer) {
//
// Only need to read the data into buffer one time
//
return EFI_SUCCESS;
}
}
}
return ReturnStatus;
}
/**
Return the current video mode information.
@param This The EFI_UGA_DRAW_PROTOCOL instance.
@param HorizontalResolution The size of video screen in pixels in the X dimension.
@param VerticalResolution The size of video screen in pixels in the Y dimension.
@param ColorDepth Number of bits per pixel, currently defined to be 32.
@param RefreshRate The refresh rate of the monitor in Hertz.
@retval EFI_SUCCESS Mode information returned.
@retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
@retval EFI_INVALID_PARAMETER One of the input args was NULL.
**/
EFI_STATUS
EFIAPI
ConSplitterUgaDrawGetMode (
IN EFI_UGA_DRAW_PROTOCOL *This,
OUT UINT32 *HorizontalResolution,
OUT UINT32 *VerticalResolution,
OUT UINT32 *ColorDepth,
OUT UINT32 *RefreshRate
)
{
TEXT_OUT_SPLITTER_PRIVATE_DATA *Private;
if ((HorizontalResolution == NULL) ||
(VerticalResolution == NULL) ||
(RefreshRate == NULL) ||
(ColorDepth == NULL)) {
return EFI_INVALID_PARAMETER;
}
//
// retrieve private data
//
Private = UGA_DRAW_SPLITTER_PRIVATE_DATA_FROM_THIS (This);
*HorizontalResolution = Private->UgaHorizontalResolution;
*VerticalResolution = Private->UgaVerticalResolution;
*ColorDepth = Private->UgaColorDepth;
*RefreshRate = Private->UgaRefreshRate;
return EFI_SUCCESS;
}
/**
Set the current video mode information.
@param This The EFI_UGA_DRAW_PROTOCOL instance.
@param HorizontalResolution The size of video screen in pixels in the X dimension.
@param VerticalResolution The size of video screen in pixels in the Y dimension.
@param ColorDepth Number of bits per pixel, currently defined to be 32.
@param RefreshRate The refresh rate of the monitor in Hertz.
@retval EFI_SUCCESS Mode information returned.
@retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
@retval EFI_OUT_OF_RESOURCES Out of resources.
**/
EFI_STATUS
EFIAPI
ConSplitterUgaDrawSetMode (
IN EFI_UGA_DRAW_PROTOCOL *This,
IN UINT32 HorizontalResolution,
IN UINT32 VerticalResolution,
IN UINT32 ColorDepth,
IN UINT32 RefreshRate
)
{
EFI_STATUS Status;
TEXT_OUT_SPLITTER_PRIVATE_DATA *Private;
UINTN Index;
EFI_STATUS ReturnStatus;
EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
UINTN NumberIndex;
UINTN SizeOfInfo;
EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *Info;
EFI_UGA_DRAW_PROTOCOL *UgaDraw;
Private = UGA_DRAW_SPLITTER_PRIVATE_DATA_FROM_THIS (This);
ReturnStatus = EFI_SUCCESS;
//
// Update the Mode data
//
Private->UgaHorizontalResolution = HorizontalResolution;
Private->UgaVerticalResolution = VerticalResolution;
Private->UgaColorDepth = ColorDepth;
Private->UgaRefreshRate = RefreshRate;
//
// return the worst status met
//
for (Index = 0; Index < Private->CurrentNumberOfConsoles; Index++) {
GraphicsOutput = Private->TextOutList[Index].GraphicsOutput;
if (GraphicsOutput != NULL) {
//
// Find corresponding ModeNumber of this GraphicsOutput instance
//
for (NumberIndex = 0; NumberIndex < GraphicsOutput->Mode->MaxMode; NumberIndex ++) {
Status = GraphicsOutput->QueryMode (GraphicsOutput, (UINT32) NumberIndex, &SizeOfInfo, &Info);
if (EFI_ERROR (Status)) {
return Status;
}
if ((Info->HorizontalResolution == HorizontalResolution) && (Info->VerticalResolution == VerticalResolution)) {
FreePool (Info);
break;
}
FreePool (Info);
}
Status = GraphicsOutput->SetMode (GraphicsOutput, (UINT32) NumberIndex);
if (EFI_ERROR (Status)) {
ReturnStatus = Status;
}
} else if (FeaturePcdGet (PcdUgaConsumeSupport)){
UgaDraw = Private->TextOutList[Index].UgaDraw;
if (UgaDraw != NULL) {
Status = UgaDraw->SetMode (
UgaDraw,
HorizontalResolution,
VerticalResolution,
ColorDepth,
RefreshRate
);
if (EFI_ERROR (Status)) {
ReturnStatus = Status;
}
}
}
}
return ReturnStatus;
}
/**
Blt a rectangle of pixels on the graphics screen.
The following table defines actions for BltOperations.
EfiUgaVideoFill:
Write data from the BltBuffer pixel (SourceX, SourceY)
directly to every pixel of the video display rectangle
(DestinationX, DestinationY)
(DestinationX + Width, DestinationY + Height).
Only one pixel will be used from the BltBuffer. Delta is NOT used.
EfiUgaVideoToBltBuffer:
Read data from the video display rectangle
(SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in
the BltBuffer rectangle (DestinationX, DestinationY )
(DestinationX + Width, DestinationY + Height). If DestinationX or
DestinationY is not zero then Delta must be set to the length in bytes
of a row in the BltBuffer.
EfiUgaBltBufferToVideo:
Write data from the BltBuffer rectangle
(SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the
video display rectangle (DestinationX, DestinationY)
(DestinationX + Width, DestinationY + Height). If SourceX or SourceY is
not zero then Delta must be set to the length in bytes of a row in the
BltBuffer.
EfiUgaVideoToVideo:
Copy from the video display rectangle
(SourceX, SourceY) (SourceX + Width, SourceY + Height) .
to the video display rectangle (DestinationX, DestinationY)
(DestinationX + Width, DestinationY + Height).
The BltBuffer and Delta are not used in this mode.
@param This Protocol instance pointer.
@param BltBuffer Buffer containing data to blit into video buffer. This
buffer has a size of Width*Height*sizeof(EFI_UGA_PIXEL)
@param BltOperation Operation to perform on BlitBuffer and video memory
@param SourceX X coordinate of source for the BltBuffer.
@param SourceY Y coordinate of source for the BltBuffer.
@param DestinationX X coordinate of destination for the BltBuffer.
@param DestinationY Y coordinate of destination for the BltBuffer.
@param Width Width of rectangle in BltBuffer in pixels.
@param Height Hight of rectangle in BltBuffer in pixels.
@param Delta OPTIONAL
@retval EFI_SUCCESS The Blt operation completed.
@retval EFI_INVALID_PARAMETER BltOperation is not valid.
@retval EFI_DEVICE_ERROR A hardware error occured writting to the video buffer.
**/
EFI_STATUS
EFIAPI
ConSplitterUgaDrawBlt (
IN EFI_UGA_DRAW_PROTOCOL *This,
IN EFI_UGA_PIXEL *BltBuffer, OPTIONAL
IN EFI_UGA_BLT_OPERATION BltOperation,
IN UINTN SourceX,
IN UINTN SourceY,
IN UINTN DestinationX,
IN UINTN DestinationY,
IN UINTN Width,
IN UINTN Height,
IN UINTN Delta OPTIONAL
)
{
EFI_STATUS Status;
TEXT_OUT_SPLITTER_PRIVATE_DATA *Private;
UINTN Index;
EFI_STATUS ReturnStatus;
EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
Private = UGA_DRAW_SPLITTER_PRIVATE_DATA_FROM_THIS (This);
ReturnStatus = EFI_SUCCESS;
//
// return the worst status met
//
for (Index = 0; Index < Private->CurrentNumberOfConsoles; Index++) {
GraphicsOutput = Private->TextOutList[Index].GraphicsOutput;
if (GraphicsOutput != NULL) {
Status = GraphicsOutput->Blt (
GraphicsOutput,
(EFI_GRAPHICS_OUTPUT_BLT_PIXEL *) BltBuffer,
(EFI_GRAPHICS_OUTPUT_BLT_OPERATION) BltOperation,
SourceX,
SourceY,
DestinationX,
DestinationY,
Width,
Height,
Delta
);
if (EFI_ERROR (Status)) {
ReturnStatus = Status;
} else if (BltOperation == EfiBltVideoToBltBuffer) {
//
// Only need to read the data into buffer one time
//
return EFI_SUCCESS;
}
}
if (Private->TextOutList[Index].UgaDraw != NULL && FeaturePcdGet (PcdUgaConsumeSupport)) {
Status = Private->TextOutList[Index].UgaDraw->Blt (
Private->TextOutList[Index].UgaDraw,
BltBuffer,
BltOperation,
SourceX,
SourceY,
DestinationX,
DestinationY,
Width,
Height,
Delta
);
if (EFI_ERROR (Status)) {
ReturnStatus = Status;
} else if (BltOperation == EfiUgaVideoToBltBuffer) {
//
// Only need to read the data into buffer one time
//
return EFI_SUCCESS;
}
}
}
return ReturnStatus;
}
/**
Sets the output device(s) to a specified mode.
@param Private Text Out Splitter pointer.
@param ModeNumber The mode number to set.
**/
VOID
TextOutSetMode (
IN TEXT_OUT_SPLITTER_PRIVATE_DATA *Private,
IN UINTN ModeNumber
)
{
//
// No need to do extra check here as whether (Column, Row) is valid has
// been checked in ConSplitterTextOutSetCursorPosition. And (0, 0) should
// always be supported.
//
Private->TextOutMode.Mode = (INT32) ModeNumber;
Private->TextOutMode.CursorColumn = 0;
Private->TextOutMode.CursorRow = 0;
Private->TextOutMode.CursorVisible = TRUE;
return;
}