audk/Nt32Pkg/Nt32Pkg.fdf

394 lines
17 KiB
Plaintext
Raw Normal View History

## @file
# This is NT32 FDF file with UEFI HII features enabled
#
# Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into the Flash Device Image. Each FD section
# defines one flash "device" image. A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash" image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.Nt32]
BaseAddress = 0x0|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFdBaseAddress #The base address of the FLASH Device.
Size = 0x002a0000 #The size in bytes of the FLASH Device
ErasePolarity = 1
BlockSize = 0x10000
NumBlocks = 0x2a
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
0x00000000|0x00280000
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashFvRecoveryBase|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashFvRecoverySize
FV = FvRecovery
0x00280000|0x0000c000
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
#NV_VARIABLE_STORE
DATA = {
## This is the EFI_FIRMWARE_VOLUME_HEADER
# ZeroVector []
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
# FileSystemGuid: gEfiSystemNvDataFvGuid =
# { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
# FvLength: 0x20000
0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
#Signature "_FVH" #Attributes
0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,
#HeaderLength #CheckSum #ExtHeaderOffset #Reserved #Revision
0x48, 0x00, 0x36, 0x09, 0x00, 0x00, 0x00, 0x02,
#Blockmap[0]: 2 Blocks * 0x10000 Bytes / Block
0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
#Blockmap[1]: End
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
## This is the VARIABLE_STORE_HEADER
!if $(SECURE_BOOT_ENABLE) == TRUE
#Signature: gEfiAuthenticatedVariableGuid =
# { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 }}
0x78, 0x2c, 0xf3, 0xaa, 0x7b, 0x94, 0x9a, 0x43,
0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92,
!else
#Signature: gEfiVariableGuid =
# { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41,
0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d,
!endif
#Size: 0xc000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0xBFB8
# This can speed up the Variable Dispatch a bit.
0xB8, 0xBF, 0x00, 0x00,
#FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}
0x0028c000|0x00002000
#NV_EVENT_LOG
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogBase|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogSize
0x0028e000|0x00002000
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
#NV_FTW_WORKING
DATA = {
# EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid =
# { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
0x2b, 0x29, 0x58, 0x9e, 0x68, 0x7c, 0x7d, 0x49,
0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95,
# Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved
0xE2, 0x33, 0xF2, 0x03, 0xFE, 0xFF, 0xFF, 0xFF,
# WriteQueueSize: UINT64
0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}
0x00290000|0x00010000
#NV_FTW_SPARE
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FvRecovery]
FvAlignment = 16 #FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FvNameGuid = 6D99E806-3D38-42c2-A095-5F4300BFD7DC
################################################################################
#
# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.
# Parsing tools will scan the INF file to determine the type of component or module.
# The component or module type is used to reference the standard rules
# defined elsewhere in the FDF file.
#
# The format for INF statements is:
# INF $(PathAndInfFileName)
#
################################################################################
##
# PEI Phase modules
##
##
# PEI Apriori file example, more PEIM module added later.
##
APRIORI PEI {
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf
INF MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf
INF Nt32Pkg/WinNtOemHookStatusCodeHandlerPei/WinNtOemHookStatusCodeHandlerPei.inf
}
APRIORI DXE {
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF Nt32Pkg/MetronomeDxe/MetronomeDxe.inf
}
INF MdeModulePkg/Core/Pei/PeiMain.inf
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf
INF MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf
INF Nt32Pkg/WinNtOemHookStatusCodeHandlerPei/WinNtOemHookStatusCodeHandlerPei.inf
INF Nt32Pkg/BootModePei/BootModePei.inf
INF Nt32Pkg/StallPei/StallPei.inf
INF Nt32Pkg/WinNtFlashMapPei/WinNtFlashMapPei.inf
INF Nt32Pkg/WinNtAutoScanPei/WinNtAutoScanPei.inf
INF Nt32Pkg/WinNtFirmwareVolumePei/WinNtFirmwareVolumePei.inf
INF MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf
!if $(SECURE_BOOT_ENABLE) == TRUE
INF SecurityPkg/VariableAuthenticated/Pei/VariablePei.inf
!else
INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
!endif
INF Nt32Pkg/WinNtThunkPPIToProtocolPei/WinNtThunkPPIToProtocolPei.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
##
# DXE Phase modules
##
INF MdeModulePkg/Core/Dxe/DxeMain.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF Nt32Pkg/MetronomeDxe/MetronomeDxe.inf
INF Nt32Pkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
INF Nt32Pkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF Nt32Pkg/FvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF Nt32Pkg/WinNtThunkDxe/WinNtThunkDxe.inf
INF Nt32Pkg/CpuRuntimeDxe/CpuRuntimeDxe.inf
INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
INF Nt32Pkg/MiscSubClassPlatformDxe/MiscSubClassPlatformDxe.inf
INF Nt32Pkg/TimerDxe/TimerDxe.inf
INF MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
INF MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
INF Nt32Pkg/WinNtOemHookStatusCodeHandlerDxe/WinNtOemHookStatusCodeHandlerDxe.inf
!if $(SECURE_BOOT_ENABLE) == TRUE
INF SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableRuntimeDxe.inf
INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
!else
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
!endif
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
INF MdeModulePkg/Universal/PrintDxe/PrintDxe.inf
INF RuleOverride = TIANOCOMPRESSED MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
INF IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
INF Nt32Pkg/WinNtBusDriverDxe/WinNtBusDriverDxe.inf
INF Nt32Pkg/WinNtBlockIoDxe/WinNtBlockIoDxe.inf
INF Nt32Pkg/WinNtSerialIoDxe/WinNtSerialIoDxe.inf
INF Nt32Pkg/WinNtGopDxe/WinNtGopDxe.inf
INF Nt32Pkg/WinNtSimpleFileSystemDxe/WinNtSimpleFileSystemDxe.inf
INF MdeModulePkg/Universal/PlatformDriOverrideDxe/PlatformDriOverrideDxe.inf
INF MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf
INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf
INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
INF Nt32Pkg/SnpNt32Dxe/SnpNt32Dxe.inf
INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
################################################################################
#
# FILE statements are provided so that a platform integrator can include
# complete EFI FFS files, as well as a method for constructing FFS files
# using curly "{}" brace scoping. The following three FILEs are
# for binary shell, binary fat and logo module.
#
################################################################################
FILE APPLICATION = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile) {
SECTION PE32 = EdkShellBinPkg/FullShell/Ia32/Shell_Full.efi
}
FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {
SECTION PE32 = FatBinPkg/EnhancedFatDxe/Ia32/Fat.efi
}
FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {
SECTION RAW = MdeModulePkg/Logo/Logo.bmp
}
################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
############################################################################
#
#[Rule.Common.DXE_DRIVER]
# FILE DRIVER = $(NAMED_GUID) {
# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
# COMPRESS PI_STD {
# GUIDED {
# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
# UI STRING="$(MODULE_NAME)" Optional
# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
# }
# }
# }
#
############################################################################
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
PE32 PE32 Align=4K $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 Align=4K $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
COMPRESS PI_STD {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
COMPRESS PI_STD {
GUIDED {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
}
}
[Rule.Common.UEFI_DRIVER.TIANOCOMPRESSED]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
COMPRESS PI_STD {
GUIDED {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
}
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
COMPRESS PI_STD {
GUIDED {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
}
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
COMPRESS PI_STD {
GUIDED {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
}
}