audk/MdePkg/Include/Protocol/GraphicsOutput.h

276 lines
10 KiB
C
Raw Normal View History

/** @file
Graphics Output Protocol from the UEFI 2.0 specification.
Abstraction of a very simple graphics device.
Copyright (c) 2006 - 2008, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __GRAPHICS_OUTPUT_H__
#define __GRAPHICS_OUTPUT_H__
#define EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID \
{ \
0x9042a9de, 0x23dc, 0x4a38, {0x96, 0xfb, 0x7a, 0xde, 0xd0, 0x80, 0x51, 0x6a } \
}
typedef struct _EFI_GRAPHICS_OUTPUT_PROTOCOL EFI_GRAPHICS_OUTPUT_PROTOCOL;
typedef struct {
UINT32 RedMask;
UINT32 GreenMask;
UINT32 BlueMask;
UINT32 ReservedMask;
} EFI_PIXEL_BITMASK;
typedef enum {
///
/// A pixel is 32-bits and byte zero represents red, byte one represents green,
/// byte two represents blue, and byte three is reserved. This is the definition
/// for the physical frame buffer. The byte values for the red, green, and blue
/// components represent the color intensity. This color intensity value range
/// from a minimum intensity of 0 to maximum intensity of 255.
///
PixelRedGreenBlueReserved8BitPerColor,
///
/// A pixel is 32-bits and byte zero represents blue, byte one represents green,
/// byte two represents red, and byte three is reserved. This is the definition
/// for the physical frame buffer. The byte values for the red, green, and blue
/// components represent the color intensity. This color intensity value range
/// from a minimum intensity of 0 to maximum intensity of 255.
///
PixelBlueGreenRedReserved8BitPerColor,
///
/// The Pixel definition of the physical frame buffer.
///
PixelBitMask,
///
/// This mode does not support a physical frame buffer.
///
PixelBltOnly,
///
/// Valid EFI_GRAPHICS_PIXEL_FORMAT enum values are less than this value.
///
PixelFormatMax
} EFI_GRAPHICS_PIXEL_FORMAT;
typedef struct {
///
/// The version of this data structure. A value of zero represents the
/// EFI_GRAPHICS_OUTPUT_MODE_INFORMATION structure as defined in this specification.
///
UINT32 Version;
///
/// The size of video screen in pixels in the X dimension.
///
UINT32 HorizontalResolution;
///
/// The size of video screen in pixels in the Y dimension.
///
UINT32 VerticalResolution;
///
/// Enumeration that defines the physical format of the pixel. A value of PixelBltOnly
/// implies that a linear frame buffer is not available for this mode.
///
EFI_GRAPHICS_PIXEL_FORMAT PixelFormat;
///
/// This bit-mask is only valid if PixelFormat is set to PixelPixelBitMask.
/// A bit being set defines what bits are used for what purpose such as Red, Green, Blue, or Reserved.
///
EFI_PIXEL_BITMASK PixelInformation;
///
/// Defines the number of pixel elements per video memory line.
///
UINT32 PixelsPerScanLine;
} EFI_GRAPHICS_OUTPUT_MODE_INFORMATION;
/**
Returns information for an available graphics mode that the graphics device
and the set of active video output devices supports.
@param This The EFI_GRAPHICS_OUTPUT_PROTOCOL instance.
@param ModeNumber The mode number to return information on.
@param SizeOfInfo A pointer to the size, in bytes, of the Info buffer.
@param Info A pointer to callee allocated buffer that returns information about ModeNumber.
@retval EFI_SUCCESS Mode information returned.
@retval EFI_BUFFER_TOO_SMALL The Info buffer was too small.
@retval EFI_DEVICE_ERROR A hardware error occurred trying to retrieve the video mode.
@retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
@retval EFI_INVALID_PARAMETER One of the input args was NULL.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_GRAPHICS_OUTPUT_PROTOCOL_QUERY_MODE)(
IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
IN UINT32 ModeNumber,
OUT UINTN *SizeOfInfo,
OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION **Info
);
/**
Set the video device into the specified mode and clears the visible portions of
the output display to black.
@param This The EFI_GRAPHICS_OUTPUT_PROTOCOL instance.
@param ModeNumber Abstraction that defines the current video mode.
@retval EFI_SUCCESS The graphics mode specified by ModeNumber was selected.
@retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
@retval EFI_UNSUPPORTED ModeNumber is not supported by this device.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_GRAPHICS_OUTPUT_PROTOCOL_SET_MODE)(
IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
IN UINT32 ModeNumber
);
typedef struct {
UINT8 Blue;
UINT8 Green;
UINT8 Red;
UINT8 Reserved;
} EFI_GRAPHICS_OUTPUT_BLT_PIXEL;
typedef union {
EFI_GRAPHICS_OUTPUT_BLT_PIXEL Pixel;
UINT32 Raw;
} EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION;
///
/// actions for BltOperations
///
typedef enum {
///
/// Write data from the BltBuffer pixel (SourceX, SourceY)
/// directly to every pixel of the video display rectangle
/// (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
/// Only one pixel will be used from the BltBuffer. Delta is NOT used.
///
EfiBltVideoFill,
///
/// Read data from the video display rectangle
/// (SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in
/// the BltBuffer rectangle (DestinationX, DestinationY )
/// (DestinationX + Width, DestinationY + Height). If DestinationX or
/// DestinationY is not zero then Delta must be set to the length in bytes
/// of a row in the BltBuffer.
///
EfiBltVideoToBltBuffer,
///
/// Write data from the BltBuffer rectangle
/// (SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the
/// video display rectangle (DestinationX, DestinationY)
/// (DestinationX + Width, DestinationY + Height). If SourceX or SourceY is
/// not zero then Delta must be set to the length in bytes of a row in the
/// BltBuffer.
///
EfiBltBufferToVideo,
///
/// Copy from the video display rectangle (SourceX, SourceY)
/// (SourceX + Width, SourceY + Height) .to the video display rectangle
/// (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
/// The BltBuffer and Delta are not used in this mode.
/// EfiBltVideoToVideo,
///
EfiBltVideoToVideo,
EfiGraphicsOutputBltOperationMax
} EFI_GRAPHICS_OUTPUT_BLT_OPERATION;
/**
Blt a rectangle of pixels on the graphics screen. Blt stands for BLock Transfer.
@param This Protocol instance pointer.
@param BltBuffer Buffer containing data to blit into video buffer. This
buffer has a size of Width*Height*sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
@param BltOperation Operation to perform on BlitBuffer and video memory
@param SourceX X coordinate of source for the BltBuffer.
@param SourceY Y coordinate of source for the BltBuffer.
@param DestinationX X coordinate of destination for the BltBuffer.
@param DestinationY Y coordinate of destination for the BltBuffer.
@param Width Width of rectangle in BltBuffer in pixels.
@param Height Hight of rectangle in BltBuffer in pixels.
@param Delta OPTIONAL
@retval EFI_SUCCESS The Blt operation completed.
@retval EFI_INVALID_PARAMETER BltOperation is not valid.
@retval EFI_DEVICE_ERROR A hardware error occured writting to the video buffer.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_GRAPHICS_OUTPUT_PROTOCOL_BLT)(
IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, OPTIONAL
IN EFI_GRAPHICS_OUTPUT_BLT_OPERATION BltOperation,
IN UINTN SourceX,
IN UINTN SourceY,
IN UINTN DestinationX,
IN UINTN DestinationY,
IN UINTN Width,
IN UINTN Height,
IN UINTN Delta OPTIONAL
);
typedef struct {
///
/// The number of modes supported by QueryMode() and SetMode().
///
UINT32 MaxMode;
///
/// Current Mode of the graphics device. Valid mode numbers are 0 to MaxMode -1.
///
UINT32 Mode;
///
/// Pointer to read-only EFI_GRAPHICS_OUTPUT_MODE_INFORMATION data.
///
EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *Info;
///
/// Size of Info structure in bytes.
///
UINTN SizeOfInfo;
///
/// Base address of graphics linear frame buffer.
/// Offset zero in FrameBufferBase represents the upper left pixel of the display.
///
EFI_PHYSICAL_ADDRESS FrameBufferBase;
///
/// Size of the frame buffer represented by FrameBufferBase in bytes.
///
UINTN FrameBufferSize;
} EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE;
///
/// Provides a basic abstraction to set video modes and copy pixels to and from
/// the graphics controller's frame buffer. The linear address of the hardware
/// frame buffer is also exposed so software can write directly to the video hardware.
///
struct _EFI_GRAPHICS_OUTPUT_PROTOCOL {
EFI_GRAPHICS_OUTPUT_PROTOCOL_QUERY_MODE QueryMode;
EFI_GRAPHICS_OUTPUT_PROTOCOL_SET_MODE SetMode;
EFI_GRAPHICS_OUTPUT_PROTOCOL_BLT Blt;
///
/// Pointer to EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE data.
///
EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE *Mode;
};
extern EFI_GUID gEfiGraphicsOutputProtocolGuid;
#endif