audk/SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareUpdateDxe.c

842 lines
32 KiB
C
Raw Normal View History

SignedCapsulePkg/SystemFirmwareUpdate: Add SystemFirmwareUpdate. SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule. SystemFirmwareReportDxe.inf can be included in system BIOS. It is a lightweight FMP protocol implementation and it only reports FMP information, so that ESRT table can report the system firmware information. SetImage() will dispatch the driver FV in the EDKII system FMP image (SystemFirmwareUpdateDxe), then pass thru the SetImage() request to latter. SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image. It is a full feature FMP protocol implementation and supports SetImage(). It can be used to update the system firmware. SystemFirmwareUpdateDxe.inf can also be included in system firmware. If so SystemFirmwareReportDxe.inf is not needed. SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and version check. If and only if the FMP authentication passes, and new EDKII system capsule version is no less than current system firmware LowestSupportedVersion, the system firmware will be updated. Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Chao Zhang <chao.b.zhang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
2016-09-21 04:30:12 +02:00
/** @file
SetImage instance to update system firmware.
Caution: This module requires additional review when modified.
This module will have external input - capsule image.
This external input must be validated carefully to avoid security issue like
buffer overflow, integer overflow.
FmpSetImage() will receive untrusted input and do basic validation.
Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
SignedCapsulePkg/SystemFirmwareUpdate: Add SystemFirmwareUpdate. SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule. SystemFirmwareReportDxe.inf can be included in system BIOS. It is a lightweight FMP protocol implementation and it only reports FMP information, so that ESRT table can report the system firmware information. SetImage() will dispatch the driver FV in the EDKII system FMP image (SystemFirmwareUpdateDxe), then pass thru the SetImage() request to latter. SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image. It is a full feature FMP protocol implementation and supports SetImage(). It can be used to update the system firmware. SystemFirmwareUpdateDxe.inf can also be included in system firmware. If so SystemFirmwareReportDxe.inf is not needed. SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and version check. If and only if the FMP authentication passes, and new EDKII system capsule version is no less than current system firmware LowestSupportedVersion, the system firmware will be updated. Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Chao Zhang <chao.b.zhang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
2016-09-21 04:30:12 +02:00
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "SystemFirmwareDxe.h"
//
// SystemFmp driver private data
//
SYSTEM_FMP_PRIVATE_DATA *mSystemFmpPrivate = NULL;
EFI_GUID mCurrentImageTypeId;
BOOLEAN mNvRamUpdated = FALSE;
/**
Parse Config data file to get the updated data array.
@param[in] DataBuffer Config raw file buffer.
@param[in] BufferSize Size of raw buffer.
@param[in, out] ConfigHeader Pointer to the config header.
@param[in, out] UpdateArray Pointer to the config of update data.
@retval EFI_NOT_FOUND No config data is found.
@retval EFI_OUT_OF_RESOURCES No enough memory is allocated.
@retval EFI_SUCCESS Parse the config file successfully.
**/
EFI_STATUS
ParseUpdateDataFile (
IN UINT8 *DataBuffer,
IN UINTN BufferSize,
IN OUT CONFIG_HEADER *ConfigHeader,
IN OUT UPDATE_CONFIG_DATA **UpdateArray
);
/**
Update System Firmware image component.
@param[in] SystemFirmwareImage Points to the System Firmware image.
@param[in] SystemFirmwareImageSize The length of the System Firmware image in bytes.
@param[in] ConfigData Points to the component configuration structure.
@param[out] LastAttemptVersion The last attempt version, which will be recorded in ESRT and FMP EFI_FIRMWARE_IMAGE_DESCRIPTOR.
@param[out] LastAttemptStatus The last attempt status, which will be recorded in ESRT and FMP EFI_FIRMWARE_IMAGE_DESCRIPTOR.
@retval EFI_SUCCESS The System Firmware image is updated.
@retval EFI_WRITE_PROTECTED The flash device is read only.
**/
EFI_STATUS
PerformUpdate (
IN VOID *SystemFirmwareImage,
IN UINTN SystemFirmwareImageSize,
IN UPDATE_CONFIG_DATA *ConfigData,
OUT UINT32 *LastAttemptVersion,
OUT UINT32 *LastAttemptStatus
)
{
EFI_STATUS Status;
DEBUG((DEBUG_INFO, "PlatformUpdate:"));
DEBUG((DEBUG_INFO, " BaseAddress - 0x%lx,", ConfigData->BaseAddress));
DEBUG((DEBUG_INFO, " ImageOffset - 0x%x,", ConfigData->ImageOffset));
DEBUG((DEBUG_INFO, " Legnth - 0x%x\n", ConfigData->Length));
Status = PerformFlashWrite (
ConfigData->FirmwareType,
ConfigData->BaseAddress,
ConfigData->AddressType,
(VOID *)((UINTN)SystemFirmwareImage + (UINTN)ConfigData->ImageOffset),
ConfigData->Length
);
if (!EFI_ERROR(Status)) {
*LastAttemptStatus = LAST_ATTEMPT_STATUS_SUCCESS;
if (ConfigData->FirmwareType == PlatformFirmwareTypeNvRam) {
mNvRamUpdated = TRUE;
}
} else {
*LastAttemptStatus = LAST_ATTEMPT_STATUS_ERROR_UNSUCCESSFUL;
}
return Status;
}
/**
Update System Firmware image.
@param[in] SystemFirmwareImage Points to the System Firmware image.
@param[in] SystemFirmwareImageSize The length of the System Firmware image in bytes.
@param[in] ConfigImage Points to the config file image.
@param[in] ConfigImageSize The length of the config file image in bytes.
@param[out] LastAttemptVersion The last attempt version, which will be recorded in ESRT and FMP EFI_FIRMWARE_IMAGE_DESCRIPTOR.
@param[out] LastAttemptStatus The last attempt status, which will be recorded in ESRT and FMP EFI_FIRMWARE_IMAGE_DESCRIPTOR.
@retval EFI_SUCCESS The System Firmware image is updated.
@retval EFI_WRITE_PROTECTED The flash device is read only.
**/
EFI_STATUS
UpdateImage (
IN VOID *SystemFirmwareImage,
IN UINTN SystemFirmwareImageSize,
IN VOID *ConfigImage,
IN UINTN ConfigImageSize,
OUT UINT32 *LastAttemptVersion,
OUT UINT32 *LastAttemptStatus
)
{
EFI_STATUS Status;
UPDATE_CONFIG_DATA *ConfigData;
UPDATE_CONFIG_DATA *UpdateConfigData;
CONFIG_HEADER ConfigHeader;
UINTN Index;
if (ConfigImage == NULL) {
DEBUG((DEBUG_INFO, "PlatformUpdate (NoConfig):"));
DEBUG((DEBUG_INFO, " BaseAddress - 0x%x,", 0));
DEBUG((DEBUG_INFO, " Length - 0x%x\n", SystemFirmwareImageSize));
// ASSUME the whole System Firmware include NVRAM region.
Status = PerformFlashWrite (
PlatformFirmwareTypeNvRam,
0,
FlashAddressTypeRelativeAddress,
SystemFirmwareImage,
SystemFirmwareImageSize
);
if (!EFI_ERROR(Status)) {
*LastAttemptStatus = LAST_ATTEMPT_STATUS_SUCCESS;
mNvRamUpdated = TRUE;
} else {
*LastAttemptStatus = LAST_ATTEMPT_STATUS_ERROR_UNSUCCESSFUL;
}
return Status;
}
DEBUG((DEBUG_INFO, "PlatformUpdate (With Config):\n"));
ConfigData = NULL;
ZeroMem (&ConfigHeader, sizeof(ConfigHeader));
Status = ParseUpdateDataFile (
ConfigImage,
ConfigImageSize,
&ConfigHeader,
&ConfigData
);
DEBUG((DEBUG_INFO, "ParseUpdateDataFile - %r\n", Status));
if (EFI_ERROR(Status)) {
*LastAttemptStatus = LAST_ATTEMPT_STATUS_ERROR_UNSUCCESSFUL;
return EFI_INVALID_PARAMETER;
}
DEBUG((DEBUG_INFO, "ConfigHeader.NumOfUpdates - 0x%x\n", ConfigHeader.NumOfUpdates));
DEBUG((DEBUG_INFO, "PcdEdkiiSystemFirmwareFileGuid - %g\n", PcdGetPtr(PcdEdkiiSystemFirmwareFileGuid)));
Index = 0;
UpdateConfigData = ConfigData;
while (Index < ConfigHeader.NumOfUpdates) {
if (CompareGuid(&UpdateConfigData->FileGuid, PcdGetPtr(PcdEdkiiSystemFirmwareFileGuid))) {
DEBUG((DEBUG_INFO, "FileGuid - %g (processing)\n", &UpdateConfigData->FileGuid));
Status = PerformUpdate (
SystemFirmwareImage,
SystemFirmwareImageSize,
UpdateConfigData,
LastAttemptVersion,
LastAttemptStatus
);
//
// Shall updates be serialized so that if an update is not successfully completed,
// the remaining updates won't be performed.
//
if (EFI_ERROR (Status)) {
break;
}
} else {
DEBUG((DEBUG_INFO, "FileGuid - %g (ignored)\n", &UpdateConfigData->FileGuid));
}
Index++;
UpdateConfigData++;
}
return Status;
}
/**
Authenticate and update System Firmware image.
Caution: This function may receive untrusted input.
@param[in] Image The EDKII system FMP capsule image.
@param[in] ImageSize The size of the EDKII system FMP capsule image in bytes.
@param[out] LastAttemptVersion The last attempt version, which will be recorded in ESRT and FMP EFI_FIRMWARE_IMAGE_DESCRIPTOR.
@param[out] LastAttemptStatus The last attempt status, which will be recorded in ESRT and FMP EFI_FIRMWARE_IMAGE_DESCRIPTOR.
@retval EFI_SUCCESS EDKII system FMP capsule passes authentication and the System Firmware image is updated.
@retval EFI_SECURITY_VIOLATION EDKII system FMP capsule fails authentication and the System Firmware image is not updated.
@retval EFI_WRITE_PROTECTED The flash device is read only.
**/
EFI_STATUS
SystemFirmwareAuthenticatedUpdate (
IN VOID *Image,
IN UINTN ImageSize,
OUT UINT32 *LastAttemptVersion,
OUT UINT32 *LastAttemptStatus
)
{
EFI_STATUS Status;
VOID *SystemFirmwareImage;
UINTN SystemFirmwareImageSize;
VOID *ConfigImage;
UINTN ConfigImageSize;
VOID *AuthenticatedImage;
UINTN AuthenticatedImageSize;
AuthenticatedImage = NULL;
AuthenticatedImageSize = 0;
SignedCapsulePkg/SystemFirmwareUpdate: Add SystemFirmwareUpdate. SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule. SystemFirmwareReportDxe.inf can be included in system BIOS. It is a lightweight FMP protocol implementation and it only reports FMP information, so that ESRT table can report the system firmware information. SetImage() will dispatch the driver FV in the EDKII system FMP image (SystemFirmwareUpdateDxe), then pass thru the SetImage() request to latter. SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image. It is a full feature FMP protocol implementation and supports SetImage(). It can be used to update the system firmware. SystemFirmwareUpdateDxe.inf can also be included in system firmware. If so SystemFirmwareReportDxe.inf is not needed. SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and version check. If and only if the FMP authentication passes, and new EDKII system capsule version is no less than current system firmware LowestSupportedVersion, the system firmware will be updated. Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Chao Zhang <chao.b.zhang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
2016-09-21 04:30:12 +02:00
DEBUG((DEBUG_INFO, "SystemFirmwareAuthenticatedUpdate...\n"));
Status = CapsuleAuthenticateSystemFirmware(Image, ImageSize, FALSE, LastAttemptVersion, LastAttemptStatus, &AuthenticatedImage, &AuthenticatedImageSize);
if (EFI_ERROR(Status)) {
DEBUG((DEBUG_INFO, "SystemFirmwareAuthenticateImage - %r\n", Status));
return Status;
}
DEBUG((DEBUG_INFO, "ExtractSystemFirmwareImage ...\n"));
ExtractSystemFirmwareImage(AuthenticatedImage, AuthenticatedImageSize, &SystemFirmwareImage, &SystemFirmwareImageSize);
DEBUG((DEBUG_INFO, "ExtractConfigImage ...\n"));
ExtractConfigImage(AuthenticatedImage, AuthenticatedImageSize, &ConfigImage, &ConfigImageSize);
DEBUG((DEBUG_INFO, "UpdateImage ...\n"));
Status = UpdateImage(SystemFirmwareImage, SystemFirmwareImageSize, ConfigImage, ConfigImageSize, LastAttemptVersion, LastAttemptStatus);
if (EFI_ERROR(Status)) {
DEBUG((DEBUG_INFO, "UpdateImage - %r\n", Status));
return Status;
}
DEBUG((DEBUG_INFO, "SystemFirmwareAuthenticatedUpdate Done\n"));
return EFI_SUCCESS;
}
/**
This code finds variable in storage blocks (Volatile or Non-Volatile).
@param[in] VariableName Name of Variable to be found.
@param[in] VendorGuid Variable vendor GUID.
@param[out] Attributes Attribute value of the variable found.
@param[in, out] DataSize Size of Data found. If size is less than the
data, this value contains the required size.
@param[out] Data Data pointer.
@return EFI_INVALID_PARAMETER Invalid parameter.
@return EFI_SUCCESS Find the specified variable.
@return EFI_NOT_FOUND Not found.
@return EFI_BUFFER_TO_SMALL DataSize is too small for the result.
**/
EFI_STATUS
EFIAPI
GetVariableHook (
IN CHAR16 *VariableName,
IN EFI_GUID *VendorGuid,
OUT UINT32 *Attributes OPTIONAL,
IN OUT UINTN *DataSize,
OUT VOID *Data
)
{
DEBUG((DEBUG_INFO, "GetVariableHook - %S, %g\n", VariableName, VendorGuid));
return EFI_NOT_AVAILABLE_YET;
}
/**
This code Finds the Next available variable.
@param[in, out] VariableNameSize Size of the variable name.
@param[in, out] VariableName Pointer to variable name.
@param[in, out] VendorGuid Variable Vendor Guid.
@return EFI_INVALID_PARAMETER Invalid parameter.
@return EFI_SUCCESS Find the specified variable.
@return EFI_NOT_FOUND Not found.
@return EFI_BUFFER_TO_SMALL DataSize is too small for the result.
**/
EFI_STATUS
EFIAPI
GetNextVariableNameHook (
IN OUT UINTN *VariableNameSize,
IN OUT CHAR16 *VariableName,
IN OUT EFI_GUID *VendorGuid
)
{
DEBUG((DEBUG_INFO, "GetNextVariableNameHook - %S, %g\n", VariableName, VendorGuid));
return EFI_NOT_AVAILABLE_YET;
}
/**
This code sets variable in storage blocks (Volatile or Non-Volatile).
@param[in] VariableName Name of Variable to be found.
@param[in] VendorGuid Variable vendor GUID.
@param[in] Attributes Attribute value of the variable found
@param[in] DataSize Size of Data found. If size is less than the
data, this value contains the required size.
@param[in] Data Data pointer.
@return EFI_INVALID_PARAMETER Invalid parameter.
@return EFI_SUCCESS Set successfully.
@return EFI_OUT_OF_RESOURCES Resource not enough to set variable.
@return EFI_NOT_FOUND Not found.
@return EFI_WRITE_PROTECTED Variable is read-only.
**/
EFI_STATUS
EFIAPI
SetVariableHook (
IN CHAR16 *VariableName,
IN EFI_GUID *VendorGuid,
IN UINT32 Attributes,
IN UINTN DataSize,
IN VOID *Data
)
{
DEBUG((DEBUG_INFO, "SetVariableHook - %S, %g, 0x%x (0x%x)\n", VariableName, VendorGuid, Attributes, DataSize));
return EFI_NOT_AVAILABLE_YET;
}
/**
This code returns information about the EFI variables.
@param[in] Attributes Attributes bitmask to specify the type of variables
on which to return information.
@param[out] MaximumVariableStorageSize Pointer to the maximum size of the storage space available
for the EFI variables associated with the attributes specified.
@param[out] RemainingVariableStorageSize Pointer to the remaining size of the storage space available
for EFI variables associated with the attributes specified.
@param[out] MaximumVariableSize Pointer to the maximum size of an individual EFI variables
associated with the attributes specified.
@return EFI_SUCCESS Query successfully.
**/
EFI_STATUS
EFIAPI
QueryVariableInfoHook (
IN UINT32 Attributes,
OUT UINT64 *MaximumVariableStorageSize,
OUT UINT64 *RemainingVariableStorageSize,
OUT UINT64 *MaximumVariableSize
)
{
DEBUG((DEBUG_INFO, "QueryVariableInfoHook - 0x%x\n", Attributes));
return EFI_NOT_AVAILABLE_YET;
}
/**
Updates the firmware image of the device.
This function updates the hardware with the new firmware image.
This function returns EFI_UNSUPPORTED if the firmware image is not updatable.
If the firmware image is updatable, the function should perform the following minimal validations
before proceeding to do the firmware image update.
- Validate the image authentication if image has attribute
IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED. The function returns
EFI_SECURITY_VIOLATION if the validation fails.
- Validate the image is a supported image for this device. The function returns EFI_ABORTED if
the image is unsupported. The function can optionally provide more detailed information on
why the image is not a supported image.
- Validate the data from VendorCode if not null. Image validation must be performed before
VendorCode data validation. VendorCode data is ignored or considered invalid if image
validation failed. The function returns EFI_ABORTED if the data is invalid.
VendorCode enables vendor to implement vendor-specific firmware image update policy. Null if
the caller did not specify the policy or use the default policy. As an example, vendor can implement
a policy to allow an option to force a firmware image update when the abort reason is due to the new
firmware image version is older than the current firmware image version or bad image checksum.
Sensitive operations such as those wiping the entire firmware image and render the device to be
non-functional should be encoded in the image itself rather than passed with the VendorCode.
AbortReason enables vendor to have the option to provide a more detailed description of the abort
reason to the caller.
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device.
The number is between 1 and DescriptorCount.
@param[in] Image Points to the new image.
@param[in] ImageSize Size of the new image in bytes.
@param[in] VendorCode This enables vendor to implement vendor-specific firmware image update policy.
Null indicates the caller did not specify the policy or use the default policy.
@param[in] Progress A function used by the driver to report the progress of the firmware update.
@param[out] AbortReason A pointer to a pointer to a null-terminated string providing more
details for the aborted operation. The buffer is allocated by this function
with AllocatePool(), and it is the caller's responsibility to free it with a
call to FreePool().
@retval EFI_SUCCESS The device was successfully updated with the new image.
@retval EFI_ABORTED The operation is aborted.
@retval EFI_INVALID_PARAMETER The Image was NULL.
@retval EFI_UNSUPPORTED The operation is not supported.
@retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure.
**/
EFI_STATUS
EFIAPI
FmpSetImage (
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
IN UINT8 ImageIndex,
IN CONST VOID *Image,
IN UINTN ImageSize,
IN CONST VOID *VendorCode,
IN EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS Progress,
OUT CHAR16 **AbortReason
)
{
EFI_STATUS Status;
EFI_STATUS VarStatus;
SYSTEM_FMP_PRIVATE_DATA *SystemFmpPrivate;
if (Image == NULL || ImageSize == 0 || AbortReason == NULL) {
return EFI_INVALID_PARAMETER;
}
SystemFmpPrivate = SYSTEM_FMP_PRIVATE_DATA_FROM_FMP(This);
*AbortReason = NULL;
if (ImageIndex == 0 || ImageIndex > SystemFmpPrivate->DescriptorCount) {
return EFI_INVALID_PARAMETER;
}
Status = SystemFirmwareAuthenticatedUpdate((VOID *)Image, ImageSize, &SystemFmpPrivate->LastAttempt.LastAttemptVersion, &SystemFmpPrivate->LastAttempt.LastAttemptStatus);
DEBUG((DEBUG_INFO, "SetImage - LastAttemp Version - 0x%x, State - 0x%x\n", SystemFmpPrivate->LastAttempt.LastAttemptVersion, SystemFmpPrivate->LastAttempt.LastAttemptStatus));
//
// If NVRAM is updated, we should no longer touch variable services, because
// the current variable driver may not manage the new NVRAM region.
//
if (mNvRamUpdated) {
DEBUG ((DEBUG_INFO, "NvRamUpdated, Update Variable Serivces\n"));
gRT->GetVariable = GetVariableHook;
gRT->GetNextVariableName = GetNextVariableNameHook;
gRT->SetVariable = SetVariableHook;
gRT->QueryVariableInfo = QueryVariableInfoHook;
gRT->Hdr.CRC32 = 0;
gBS->CalculateCrc32 (
(UINT8 *) &gRT->Hdr,
gRT->Hdr.HeaderSize,
&gRT->Hdr.CRC32
);
}
VarStatus = gRT->SetVariable(
SYSTEM_FMP_LAST_ATTEMPT_VARIABLE_NAME,
&gSystemFmpLastAttemptVariableGuid,
EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS,
sizeof(SystemFmpPrivate->LastAttempt),
&SystemFmpPrivate->LastAttempt
);
DEBUG((DEBUG_INFO, "SetLastAttemp - %r\n", VarStatus));
return Status;
}
/**
Get the set of EFI_FIRMWARE_IMAGE_DESCRIPTOR structures from an FMP Protocol.
@param[in] Handle Handle with an FMP Protocol or a System FMP
Protocol.
@param[in] ProtocolGuid Pointer to the FMP Protocol GUID or System FMP
Protocol GUID.
@param[out] FmpImageInfoCount Pointer to the number of
EFI_FIRMWARE_IMAGE_DESCRIPTOR structures.
@param[out] DescriptorSize Pointer to the size, in bytes, of each
EFI_FIRMWARE_IMAGE_DESCRIPTOR structure.
@return NULL No EFI_FIRMWARE_IMAGE_DESCRIPTOR structures found.
@return !NULL Pointer to a buffer of EFI_FIRMWARE_IMAGE_DESCRIPTOR structures
allocated using AllocatePool(). Caller must free buffer with
FreePool().
**/
EFI_FIRMWARE_IMAGE_DESCRIPTOR *
GetFmpImageDescriptors (
IN EFI_HANDLE Handle,
IN EFI_GUID *ProtocolGuid,
OUT UINT8 *FmpImageInfoCount,
OUT UINTN *DescriptorSize
)
{
EFI_STATUS Status;
EFI_FIRMWARE_MANAGEMENT_PROTOCOL *Fmp;
UINTN ImageInfoSize;
EFI_FIRMWARE_IMAGE_DESCRIPTOR *FmpImageInfoBuf;
UINT32 FmpImageInfoDescriptorVer;
UINT32 PackageVersion;
CHAR16 *PackageVersionName;
*FmpImageInfoCount = 0;
*DescriptorSize = 0;
Status = gBS->HandleProtocol (
Handle,
ProtocolGuid,
(VOID **)&Fmp
);
if (EFI_ERROR (Status)) {
return NULL;
}
//
// Determine the size required for the set of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
//
ImageInfoSize = 0;
Status = Fmp->GetImageInfo (
Fmp, // FMP Pointer
&ImageInfoSize, // Buffer Size (in this case 0)
NULL, // NULL so we can get size
&FmpImageInfoDescriptorVer, // DescriptorVersion
FmpImageInfoCount, // DescriptorCount
DescriptorSize, // DescriptorSize
&PackageVersion, // PackageVersion
&PackageVersionName // PackageVersionName
);
if (Status != EFI_BUFFER_TOO_SMALL) {
DEBUG ((DEBUG_ERROR, "SystemFirmwareUpdateDxe: Unexpected Failure. Status = %r\n", Status));
return NULL;
}
//
// Allocate buffer for the set of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
//
FmpImageInfoBuf = NULL;
FmpImageInfoBuf = AllocateZeroPool (ImageInfoSize);
if (FmpImageInfoBuf == NULL) {
DEBUG ((DEBUG_ERROR, "SystemFirmwareUpdateDxe: Failed to allocate memory for descriptors.\n"));
return NULL;
}
//
// Retrieve the set of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
//
PackageVersionName = NULL;
Status = Fmp->GetImageInfo (
Fmp,
&ImageInfoSize, // ImageInfoSize
FmpImageInfoBuf, // ImageInfo
&FmpImageInfoDescriptorVer, // DescriptorVersion
FmpImageInfoCount, // DescriptorCount
DescriptorSize, // DescriptorSize
&PackageVersion, // PackageVersion
&PackageVersionName // PackageVersionName
);
//
// Free unused PackageVersionName return buffer
//
if (PackageVersionName != NULL) {
FreePool (PackageVersionName);
PackageVersionName = NULL;
}
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "SystemFirmwareUpdateDxe: Failure in GetImageInfo. Status = %r\n", Status));
if (FmpImageInfoBuf != NULL) {
FreePool (FmpImageInfoBuf);
}
return NULL;
}
return FmpImageInfoBuf;
}
/**
Search for handles with an FMP protocol whose EFI_FIRMWARE_IMAGE_DESCRIPTOR
ImageTypeId matches the ImageTypeId produced by this module.
@param[in] ProtocolGuid Pointer to the GUID of the protocol to search.
@param[out] HandleCount Pointer to the number of returned handles.
@return NULL No matching handles found.
@return !NULL Pointer to a buffer of handles allocated using AllocatePool().
Caller must free buffer with FreePool().
**/
EFI_HANDLE *
FindMatchingFmpHandles (
IN EFI_GUID *ProtocolGuid,
OUT UINTN *HandleCount
)
{
EFI_STATUS Status;
UINTN TempHandleCount;
EFI_HANDLE *HandleBuffer;
UINTN Index;
UINTN Index2;
UINTN Index3;
EFI_FIRMWARE_IMAGE_DESCRIPTOR *OriginalFmpImageInfoBuf;
EFI_FIRMWARE_IMAGE_DESCRIPTOR *FmpImageInfoBuf;
UINT8 FmpImageInfoCount;
UINTN DescriptorSize;
BOOLEAN MatchFound;
*HandleCount = 0;
TempHandleCount = 0;
HandleBuffer = NULL;
Status = gBS->LocateHandleBuffer (
ByProtocol,
ProtocolGuid,
NULL,
&TempHandleCount,
&HandleBuffer
);
if (EFI_ERROR (Status)) {
return NULL;
}
for (Index = 0; Index < TempHandleCount; Index++) {
OriginalFmpImageInfoBuf = GetFmpImageDescriptors (
HandleBuffer[Index],
ProtocolGuid,
&FmpImageInfoCount,
&DescriptorSize
);
//
// Loop through the set of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
//
FmpImageInfoBuf = OriginalFmpImageInfoBuf;
MatchFound = FALSE;
for (Index2 = 0; Index2 < FmpImageInfoCount; Index2++) {
for (Index3 = 0; Index3 < mSystemFmpPrivate->DescriptorCount; Index3++) {
MatchFound = CompareGuid (
&FmpImageInfoBuf->ImageTypeId,
&mSystemFmpPrivate->ImageDescriptor[Index3].ImageTypeId
);
if (MatchFound) {
break;
}
}
if (MatchFound) {
break;
}
//
// Increment the buffer pointer ahead by the size of the descriptor
//
FmpImageInfoBuf = (EFI_FIRMWARE_IMAGE_DESCRIPTOR *)(((UINT8 *)FmpImageInfoBuf) + DescriptorSize);
}
if (MatchFound) {
HandleBuffer[*HandleCount] = HandleBuffer[Index];
(*HandleCount)++;
}
FreePool (OriginalFmpImageInfoBuf);
}
if ((*HandleCount) == 0) {
//
// No any matching handle.
//
FreePool (HandleBuffer);
return NULL;
}
return HandleBuffer;
}
/**
Uninstall System FMP Protocol instances that may have been installed by
SystemFirmwareUpdateDxe drivers dispatches by other capsules.
@retval EFI_SUCCESS All System FMP Protocols found were uninstalled.
@return Other One or more System FMP Protocols could not be uninstalled.
**/
EFI_STATUS
UninstallMatchingSystemFmpProtocols (
VOID
)
{
EFI_STATUS Status;
EFI_HANDLE *HandleBuffer;
UINTN HandleCount;
UINTN Index;
EFI_FIRMWARE_MANAGEMENT_PROTOCOL *SystemFmp;
//
// Uninstall SystemFmpProtocol instances that may have been produced by
// the SystemFirmwareUpdate drivers in FVs dispatched by other capsules.
//
HandleBuffer = FindMatchingFmpHandles (
&gSystemFmpProtocolGuid,
&HandleCount
);
DEBUG ((DEBUG_INFO, "SystemFirmwareUpdateDxe: Found %d matching System FMP instances\n", HandleCount));
for (Index = 0; Index < HandleCount; Index++) {
Status = gBS->HandleProtocol(
HandleBuffer[Index],
&gSystemFmpProtocolGuid,
(VOID **)&SystemFmp
);
if (EFI_ERROR (Status)) {
continue;
}
DEBUG ((DEBUG_INFO, "SystemFirmwareUpdateDxe: Uninstall SystemFmp produced by another capsule\n"));
Status = gBS->UninstallProtocolInterface (
HandleBuffer[Index],
&gSystemFmpProtocolGuid,
SystemFmp
);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "SystemFirmwareUpdateDxe: Failed to uninstall SystemFmp %r. Exiting.\n", Status));
FreePool (HandleBuffer);
return Status;
}
}
if (HandleBuffer != NULL) {
FreePool (HandleBuffer);
}
return EFI_SUCCESS;
}
SignedCapsulePkg/SystemFirmwareUpdate: Add SystemFirmwareUpdate. SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule. SystemFirmwareReportDxe.inf can be included in system BIOS. It is a lightweight FMP protocol implementation and it only reports FMP information, so that ESRT table can report the system firmware information. SetImage() will dispatch the driver FV in the EDKII system FMP image (SystemFirmwareUpdateDxe), then pass thru the SetImage() request to latter. SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image. It is a full feature FMP protocol implementation and supports SetImage(). It can be used to update the system firmware. SystemFirmwareUpdateDxe.inf can also be included in system firmware. If so SystemFirmwareReportDxe.inf is not needed. SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and version check. If and only if the FMP authentication passes, and new EDKII system capsule version is no less than current system firmware LowestSupportedVersion, the system firmware will be updated. Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Chao Zhang <chao.b.zhang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
2016-09-21 04:30:12 +02:00
/**
System FMP module entrypoint
@param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] SystemTable A pointer to the EFI System Table.
SignedCapsulePkg/SystemFirmwareUpdate: Add SystemFirmwareUpdate. SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule. SystemFirmwareReportDxe.inf can be included in system BIOS. It is a lightweight FMP protocol implementation and it only reports FMP information, so that ESRT table can report the system firmware information. SetImage() will dispatch the driver FV in the EDKII system FMP image (SystemFirmwareUpdateDxe), then pass thru the SetImage() request to latter. SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image. It is a full feature FMP protocol implementation and supports SetImage(). It can be used to update the system firmware. SystemFirmwareUpdateDxe.inf can also be included in system firmware. If so SystemFirmwareReportDxe.inf is not needed. SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and version check. If and only if the FMP authentication passes, and new EDKII system capsule version is no less than current system firmware LowestSupportedVersion, the system firmware will be updated. Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Chao Zhang <chao.b.zhang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
2016-09-21 04:30:12 +02:00
@retval EFI_SUCCESS System FMP module is initialized.
@retval EFI_OUT_OF_RESOURCES There are not enough resources avaulable to
initialize this module.
@retval Other System FMP Protocols could not be uninstalled.
@retval Other System FMP Protocol could not be installed.
@retval Other FMP Protocol could not be installed.
SignedCapsulePkg/SystemFirmwareUpdate: Add SystemFirmwareUpdate. SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule. SystemFirmwareReportDxe.inf can be included in system BIOS. It is a lightweight FMP protocol implementation and it only reports FMP information, so that ESRT table can report the system firmware information. SetImage() will dispatch the driver FV in the EDKII system FMP image (SystemFirmwareUpdateDxe), then pass thru the SetImage() request to latter. SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image. It is a full feature FMP protocol implementation and supports SetImage(). It can be used to update the system firmware. SystemFirmwareUpdateDxe.inf can also be included in system firmware. If so SystemFirmwareReportDxe.inf is not needed. SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and version check. If and only if the FMP authentication passes, and new EDKII system capsule version is no less than current system firmware LowestSupportedVersion, the system firmware will be updated. Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Chao Zhang <chao.b.zhang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
2016-09-21 04:30:12 +02:00
**/
EFI_STATUS
EFIAPI
SystemFirmwareUpdateMainDxe (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
SignedCapsulePkg/SystemFirmwareUpdate: Add SystemFirmwareUpdate. SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule. SystemFirmwareReportDxe.inf can be included in system BIOS. It is a lightweight FMP protocol implementation and it only reports FMP information, so that ESRT table can report the system firmware information. SetImage() will dispatch the driver FV in the EDKII system FMP image (SystemFirmwareUpdateDxe), then pass thru the SetImage() request to latter. SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image. It is a full feature FMP protocol implementation and supports SetImage(). It can be used to update the system firmware. SystemFirmwareUpdateDxe.inf can also be included in system firmware. If so SystemFirmwareReportDxe.inf is not needed. SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and version check. If and only if the FMP authentication passes, and new EDKII system capsule version is no less than current system firmware LowestSupportedVersion, the system firmware will be updated. Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Chao Zhang <chao.b.zhang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
2016-09-21 04:30:12 +02:00
)
{
EFI_STATUS Status;
EFI_HANDLE *HandleBuffer;
UINTN HandleCount;
SignedCapsulePkg/SystemFirmwareUpdate: Add SystemFirmwareUpdate. SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule. SystemFirmwareReportDxe.inf can be included in system BIOS. It is a lightweight FMP protocol implementation and it only reports FMP information, so that ESRT table can report the system firmware information. SetImage() will dispatch the driver FV in the EDKII system FMP image (SystemFirmwareUpdateDxe), then pass thru the SetImage() request to latter. SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image. It is a full feature FMP protocol implementation and supports SetImage(). It can be used to update the system firmware. SystemFirmwareUpdateDxe.inf can also be included in system firmware. If so SystemFirmwareReportDxe.inf is not needed. SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and version check. If and only if the FMP authentication passes, and new EDKII system capsule version is no less than current system firmware LowestSupportedVersion, the system firmware will be updated. Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Chao Zhang <chao.b.zhang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
2016-09-21 04:30:12 +02:00
//
// Initialize SystemFmpPrivateData
//
mSystemFmpPrivate = AllocateZeroPool (sizeof (SYSTEM_FMP_PRIVATE_DATA));
SignedCapsulePkg/SystemFirmwareUpdate: Add SystemFirmwareUpdate. SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule. SystemFirmwareReportDxe.inf can be included in system BIOS. It is a lightweight FMP protocol implementation and it only reports FMP information, so that ESRT table can report the system firmware information. SetImage() will dispatch the driver FV in the EDKII system FMP image (SystemFirmwareUpdateDxe), then pass thru the SetImage() request to latter. SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image. It is a full feature FMP protocol implementation and supports SetImage(). It can be used to update the system firmware. SystemFirmwareUpdateDxe.inf can also be included in system firmware. If so SystemFirmwareReportDxe.inf is not needed. SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and version check. If and only if the FMP authentication passes, and new EDKII system capsule version is no less than current system firmware LowestSupportedVersion, the system firmware will be updated. Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Chao Zhang <chao.b.zhang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
2016-09-21 04:30:12 +02:00
if (mSystemFmpPrivate == NULL) {
return EFI_OUT_OF_RESOURCES;
}
Status = InitializePrivateData (mSystemFmpPrivate);
if (EFI_ERROR (Status)) {
FreePool (mSystemFmpPrivate);
SignedCapsulePkg/SystemFirmwareUpdate: Add SystemFirmwareUpdate. SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule. SystemFirmwareReportDxe.inf can be included in system BIOS. It is a lightweight FMP protocol implementation and it only reports FMP information, so that ESRT table can report the system firmware information. SetImage() will dispatch the driver FV in the EDKII system FMP image (SystemFirmwareUpdateDxe), then pass thru the SetImage() request to latter. SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image. It is a full feature FMP protocol implementation and supports SetImage(). It can be used to update the system firmware. SystemFirmwareUpdateDxe.inf can also be included in system firmware. If so SystemFirmwareReportDxe.inf is not needed. SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and version check. If and only if the FMP authentication passes, and new EDKII system capsule version is no less than current system firmware LowestSupportedVersion, the system firmware will be updated. Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Chao Zhang <chao.b.zhang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
2016-09-21 04:30:12 +02:00
mSystemFmpPrivate = NULL;
return Status;
}
//
// Uninstall SystemFmpProtocol instances that may have been produced by
// the SystemFirmwareUpdate drivers in FVs dispatched by other capsules.
SignedCapsulePkg/SystemFirmwareUpdate: Add SystemFirmwareUpdate. SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule. SystemFirmwareReportDxe.inf can be included in system BIOS. It is a lightweight FMP protocol implementation and it only reports FMP information, so that ESRT table can report the system firmware information. SetImage() will dispatch the driver FV in the EDKII system FMP image (SystemFirmwareUpdateDxe), then pass thru the SetImage() request to latter. SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image. It is a full feature FMP protocol implementation and supports SetImage(). It can be used to update the system firmware. SystemFirmwareUpdateDxe.inf can also be included in system firmware. If so SystemFirmwareReportDxe.inf is not needed. SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and version check. If and only if the FMP authentication passes, and new EDKII system capsule version is no less than current system firmware LowestSupportedVersion, the system firmware will be updated. Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Chao Zhang <chao.b.zhang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
2016-09-21 04:30:12 +02:00
//
Status = UninstallMatchingSystemFmpProtocols ();
SignedCapsulePkg/SystemFirmwareUpdate: Add SystemFirmwareUpdate. SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule. SystemFirmwareReportDxe.inf can be included in system BIOS. It is a lightweight FMP protocol implementation and it only reports FMP information, so that ESRT table can report the system firmware information. SetImage() will dispatch the driver FV in the EDKII system FMP image (SystemFirmwareUpdateDxe), then pass thru the SetImage() request to latter. SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image. It is a full feature FMP protocol implementation and supports SetImage(). It can be used to update the system firmware. SystemFirmwareUpdateDxe.inf can also be included in system firmware. If so SystemFirmwareReportDxe.inf is not needed. SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and version check. If and only if the FMP authentication passes, and new EDKII system capsule version is no less than current system firmware LowestSupportedVersion, the system firmware will be updated. Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Chao Zhang <chao.b.zhang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
2016-09-21 04:30:12 +02:00
if (EFI_ERROR (Status)) {
FreePool (mSystemFmpPrivate);
SignedCapsulePkg/SystemFirmwareUpdate: Add SystemFirmwareUpdate. SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule. SystemFirmwareReportDxe.inf can be included in system BIOS. It is a lightweight FMP protocol implementation and it only reports FMP information, so that ESRT table can report the system firmware information. SetImage() will dispatch the driver FV in the EDKII system FMP image (SystemFirmwareUpdateDxe), then pass thru the SetImage() request to latter. SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image. It is a full feature FMP protocol implementation and supports SetImage(). It can be used to update the system firmware. SystemFirmwareUpdateDxe.inf can also be included in system firmware. If so SystemFirmwareReportDxe.inf is not needed. SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and version check. If and only if the FMP authentication passes, and new EDKII system capsule version is no less than current system firmware LowestSupportedVersion, the system firmware will be updated. Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Chao Zhang <chao.b.zhang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
2016-09-21 04:30:12 +02:00
mSystemFmpPrivate = NULL;
return Status;
}
//
// Look for a handle with matching Firmware Management Protocol
//
HandleCount = 0;
HandleBuffer = FindMatchingFmpHandles (
&gEfiFirmwareManagementProtocolGuid,
&HandleCount
);
DEBUG ((DEBUG_INFO, "SystemFirmwareUpdateDxe: Found %d matching FMP instances\n", HandleCount));
switch (HandleCount) {
case 0:
//
// Install FMP protocol onto a new handle.
//
DEBUG ((DEBUG_INFO, "SystemFirmwareUpdateDxe: Install FMP onto a new handle\n"));
Status = gBS->InstallMultipleProtocolInterfaces (
&mSystemFmpPrivate->Handle,
&gEfiFirmwareManagementProtocolGuid,
&mSystemFmpPrivate->Fmp,
NULL
);
break;
case 1:
//
// Install System FMP protocol onto handle with matching FMP Protocol
//
DEBUG ((DEBUG_INFO, "SystemFirmwareUpdateDxe: Install System FMP onto matching FMP handle\n"));
mSystemFmpPrivate->Handle = HandleBuffer[0];
Status = gBS->InstallMultipleProtocolInterfaces (
&HandleBuffer[0],
&gSystemFmpProtocolGuid,
&mSystemFmpPrivate->Fmp,
NULL
);
break;
default:
//
// More than one matching handle is not expected. Unload driver.
//
DEBUG ((DEBUG_ERROR, "SystemFirmwareUpdateDxe: More than one matching FMP handle. Unload driver.\n"));
Status = EFI_DEVICE_ERROR;
break;
}
if (HandleBuffer != NULL) {
FreePool (HandleBuffer);
}
if (EFI_ERROR (Status)) {
FreePool (mSystemFmpPrivate);
mSystemFmpPrivate = NULL;
}
SignedCapsulePkg/SystemFirmwareUpdate: Add SystemFirmwareUpdate. SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule. SystemFirmwareReportDxe.inf can be included in system BIOS. It is a lightweight FMP protocol implementation and it only reports FMP information, so that ESRT table can report the system firmware information. SetImage() will dispatch the driver FV in the EDKII system FMP image (SystemFirmwareUpdateDxe), then pass thru the SetImage() request to latter. SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image. It is a full feature FMP protocol implementation and supports SetImage(). It can be used to update the system firmware. SystemFirmwareUpdateDxe.inf can also be included in system firmware. If so SystemFirmwareReportDxe.inf is not needed. SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and version check. If and only if the FMP authentication passes, and new EDKII system capsule version is no less than current system firmware LowestSupportedVersion, the system firmware will be updated. Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Chao Zhang <chao.b.zhang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
2016-09-21 04:30:12 +02:00
return Status;
}