audk/EdkModulePkg/Universal/Ebc/Dxe/x64/EbcSupport.c

620 lines
16 KiB
C
Raw Normal View History

/*++
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
EbcSupport.c
Abstract:
This module contains EBC support routines that are customized based on
the target x64 processor.
--*/
#include "EbcInt.h"
#include "EbcExecute.h"
//
// NOTE: This is the stack size allocated for the interpreter
// when it executes an EBC image. The requirements can change
// based on whether or not a debugger is present, and other
// platform-specific configurations.
//
#define VM_STACK_SIZE (1024 * 8)
#define EBC_THUNK_SIZE 64
#define STACK_REMAIN_SIZE (1024 * 4)
STATIC
VOID
PushU64 (
VM_CONTEXT *VmPtr,
UINT64 Arg
)
/*++
Routine Description:
Push a 64 bit unsigned value to the VM stack.
Arguments:
VmPtr - The pointer to current VM context.
Arg - The value to be pushed
Returns:
VOID
--*/
{
//
// Advance the VM stack down, and then copy the argument to the stack.
// Hope it's aligned.
//
VmPtr->R[0] -= sizeof (UINT64);
*(UINT64 *) VmPtr->R[0] = Arg;
return;
}
STATIC
UINT64
EbcInterpret (
UINTN Arg1,
UINTN Arg2,
UINTN Arg3,
UINTN Arg4,
UINTN Arg5,
UINTN Arg6,
UINTN Arg7,
UINTN Arg8,
UINTN Arg9,
UINTN Arg10,
UINTN Arg11,
UINTN Arg12,
UINTN Arg13,
UINTN Arg14,
UINTN Arg15,
UINTN Arg16
)
/*++
Routine Description:
Begin executing an EBC image. The address of the entry point is passed
in via a processor register, so we'll need to make a call to get the
value.
Arguments:
This is a thunk function. Microsoft x64 compiler only provide fast_call
calling convention, so the first four arguments are passed by rcx, rdx,
r8, and r9, while other arguments are passed in stack.
Returns:
The value returned by the EBC application we're going to run.
--*/
{
//
// Create a new VM context on the stack
//
VM_CONTEXT VmContext;
UINTN Addr;
EFI_STATUS Status;
UINTN StackIndex;
//
// Get the EBC entry point from the processor register.
// Don't call any function before getting the EBC entry
// point because this will collab the return register.
//
Addr = EbcLLGetEbcEntryPoint ();
//
// Now clear out our context
//
ZeroMem ((VOID *) &VmContext, sizeof (VM_CONTEXT));
//
// Set the VM instruction pointer to the correct location in memory.
//
VmContext.Ip = (VMIP) Addr;
//
// Initialize the stack pointer for the EBC. Get the current system stack
// pointer and adjust it down by the max needed for the interpreter.
//
Addr = EbcLLGetStackPointer ();
//
// Adjust the VM's stack pointer down.
//
Status = GetEBCStack((EFI_HANDLE)(UINTN)-1, &VmContext.StackPool, &StackIndex);
if (EFI_ERROR(Status)) {
return Status;
}
VmContext.StackTop = (UINT8*)VmContext.StackPool + (STACK_REMAIN_SIZE);
VmContext.R[0] = (UINT64) ((UINT8*)VmContext.StackPool + STACK_POOL_SIZE);
VmContext.HighStackBottom = (UINTN) VmContext.R[0];
VmContext.R[0] -= sizeof (UINTN);
//
// Align the stack on a natural boundary.
//
VmContext.R[0] &= ~(sizeof (UINTN) - 1);
//
// Put a magic value in the stack gap, then adjust down again.
//
*(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) VM_STACK_KEY_VALUE;
VmContext.StackMagicPtr = (UINTN *) (UINTN) VmContext.R[0];
//
// The stack upper to LowStackTop is belong to the VM.
//
VmContext.LowStackTop = (UINTN) VmContext.R[0];
//
// For the worst case, assume there are 4 arguments passed in registers, store
// them to VM's stack.
//
PushU64 (&VmContext, (UINT64) Arg16);
PushU64 (&VmContext, (UINT64) Arg15);
PushU64 (&VmContext, (UINT64) Arg14);
PushU64 (&VmContext, (UINT64) Arg13);
PushU64 (&VmContext, (UINT64) Arg12);
PushU64 (&VmContext, (UINT64) Arg11);
PushU64 (&VmContext, (UINT64) Arg10);
PushU64 (&VmContext, (UINT64) Arg9);
PushU64 (&VmContext, (UINT64) Arg8);
PushU64 (&VmContext, (UINT64) Arg7);
PushU64 (&VmContext, (UINT64) Arg6);
PushU64 (&VmContext, (UINT64) Arg5);
PushU64 (&VmContext, (UINT64) Arg4);
PushU64 (&VmContext, (UINT64) Arg3);
PushU64 (&VmContext, (UINT64) Arg2);
PushU64 (&VmContext, (UINT64) Arg1);
//
// Interpreter assumes 64-bit return address is pushed on the stack.
// The x64 does not do this so pad the stack accordingly.
//
PushU64 (&VmContext, (UINT64) 0);
PushU64 (&VmContext, (UINT64) 0x1234567887654321ULL);
//
// For x64, this is where we say our return address is
//
VmContext.StackRetAddr = (UINT64) VmContext.R[0];
//
// We need to keep track of where the EBC stack starts. This way, if the EBC
// accesses any stack variables above its initial stack setting, then we know
// it's accessing variables passed into it, which means the data is on the
// VM's stack.
// When we're called, on the stack (high to low) we have the parameters, the
// return address, then the saved ebp. Save the pointer to the return address.
// EBC code knows that's there, so should look above it for function parameters.
// The offset is the size of locals (VMContext + Addr + saved ebp).
// Note that the interpreter assumes there is a 16 bytes of return address on
// the stack too, so adjust accordingly.
// VmContext.HighStackBottom = (UINTN)(Addr + sizeof (VmContext) + sizeof (Addr));
//
//
// Begin executing the EBC code
//
EbcExecute (&VmContext);
//
// Return the value in R[7] unless there was an error
//
ReturnEBCStack(StackIndex);
return (UINT64) VmContext.R[7];
}
STATIC
UINT64
ExecuteEbcImageEntryPoint (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
/*++
Routine Description:
Begin executing an EBC image. The address of the entry point is passed
in via a processor register, so we'll need to make a call to get the
value.
Arguments:
ImageHandle - image handle for the EBC application we're executing
SystemTable - standard system table passed into an driver's entry point
Returns:
The value returned by the EBC application we're going to run.
--*/
{
//
// Create a new VM context on the stack
//
VM_CONTEXT VmContext;
UINTN Addr;
EFI_STATUS Status;
UINTN StackIndex;
//
// Get the EBC entry point from the processor register. Make sure you don't
// call any functions before this or you could mess up the register the
// entry point is passed in.
//
Addr = EbcLLGetEbcEntryPoint ();
//
// Now clear out our context
//
ZeroMem ((VOID *) &VmContext, sizeof (VM_CONTEXT));
//
// Save the image handle so we can track the thunks created for this image
//
VmContext.ImageHandle = ImageHandle;
VmContext.SystemTable = SystemTable;
//
// Set the VM instruction pointer to the correct location in memory.
//
VmContext.Ip = (VMIP) Addr;
//
// Initialize the stack pointer for the EBC. Get the current system stack
// pointer and adjust it down by the max needed for the interpreter.
//
Addr = EbcLLGetStackPointer ();
Status = GetEBCStack(ImageHandle, &VmContext.StackPool, &StackIndex);
if (EFI_ERROR(Status)) {
return Status;
}
VmContext.StackTop = (UINT8*)VmContext.StackPool + (STACK_REMAIN_SIZE);
VmContext.R[0] = (UINT64) ((UINT8*)VmContext.StackPool + STACK_POOL_SIZE);
VmContext.HighStackBottom = (UINTN) VmContext.R[0];
VmContext.R[0] -= sizeof (UINTN);
//
// Put a magic value in the stack gap, then adjust down again
//
*(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) VM_STACK_KEY_VALUE;
VmContext.StackMagicPtr = (UINTN *) (UINTN) VmContext.R[0];
//
// Align the stack on a natural boundary
VmContext.R[0] &= ~(sizeof(UINTN) - 1);
//
VmContext.LowStackTop = (UINTN) VmContext.R[0];
//
// Simply copy the image handle and system table onto the EBC stack.
// Greatly simplifies things by not having to spill the args.
//
PushU64 (&VmContext, (UINT64) SystemTable);
PushU64 (&VmContext, (UINT64) ImageHandle);
//
// VM pushes 16-bytes for return address. Simulate that here.
//
PushU64 (&VmContext, (UINT64) 0);
PushU64 (&VmContext, (UINT64) 0x1234567887654321ULL);
//
// For x64, this is where we say our return address is
//
VmContext.StackRetAddr = (UINT64) VmContext.R[0];
//
// Entry function needn't access high stack context, simply
// put the stack pointer here.
//
//
// Begin executing the EBC code
//
EbcExecute (&VmContext);
//
// Return the value in R[7] unless there was an error
//
ReturnEBCStack(StackIndex);
return (UINT64) VmContext.R[7];
}
EFI_STATUS
EbcCreateThunks (
IN EFI_HANDLE ImageHandle,
IN VOID *EbcEntryPoint,
OUT VOID **Thunk,
IN UINT32 Flags
)
/*++
Routine Description:
Create an IA32 thunk for the given EBC entry point.
Arguments:
ImageHandle - Handle of image for which this thunk is being created
EbcEntryPoint - Address of the EBC code that the thunk is to call
Thunk - Returned thunk we create here
Returns:
Standard EFI status.
--*/
{
UINT8 *Ptr;
UINT8 *ThunkBase;
UINT32 I;
UINT64 Addr;
INT32 Size;
INT32 ThunkSize;
//
// Check alignment of pointer to EBC code
//
if ((UINT32) (UINTN) EbcEntryPoint & 0x01) {
return EFI_INVALID_PARAMETER;
}
Size = EBC_THUNK_SIZE;
ThunkSize = Size;
Ptr = AllocatePool (Size);
if (Ptr == NULL) {
return EFI_OUT_OF_RESOURCES;
}
//
// Print(L"Allocate TH: 0x%X\n", (UINT32)Ptr);
//
// Save the start address so we can add a pointer to it to a list later.
//
ThunkBase = Ptr;
//
// Give them the address of our buffer we're going to fix up
//
*Thunk = (VOID *) Ptr;
//
// Add a magic code here to help the VM recognize the thunk..
// mov rax, ca112ebccall2ebch => 48 B8 BC 2E 11 CA BC 2E 11 CA
//
*Ptr = 0x48;
Ptr++;
Size--;
*Ptr = 0xB8;
Ptr++;
Size--;
Addr = (UINT64) 0xCA112EBCCA112EBCULL;
for (I = 0; I < sizeof (Addr); I++) {
*Ptr = (UINT8) (UINTN) Addr;
Addr >>= 8;
Ptr++;
Size--;
}
//
// Add code bytes to load up a processor register with the EBC entry point.
// mov rax, 123456789abcdef0h => 48 B8 F0 DE BC 9A 78 56 34 12
// The first 8 bytes of the thunk entry is the address of the EBC
// entry point.
//
*Ptr = 0x48;
Ptr++;
Size--;
*Ptr = 0xB8;
Ptr++;
Size--;
Addr = (UINT64) EbcEntryPoint;
for (I = 0; I < sizeof (Addr); I++) {
*Ptr = (UINT8) (UINTN) Addr;
Addr >>= 8;
Ptr++;
Size--;
}
//
// Stick in a load of ecx with the address of appropriate VM function.
// Using r11 because it's a volatile register and won't be used in this
// point.
// mov r11 123456789abcdef0h => 49 BB F0 DE BC 9A 78 56 34 12
//
if (Flags & FLAG_THUNK_ENTRY_POINT) {
Addr = (UINTN) ExecuteEbcImageEntryPoint;
} else {
Addr = (UINTN) EbcInterpret;
}
//
// mov r11 Addr => 0x49 0xBB
//
*Ptr = 0x49;
Ptr++;
Size--;
*Ptr = 0xBB;
Ptr++;
Size--;
for (I = 0; I < sizeof (Addr); I++) {
*Ptr = (UINT8) Addr;
Addr >>= 8;
Ptr++;
Size--;
}
//
// Stick in jump opcode bytes for jmp r11 => 0x41 0xFF 0xE3
//
*Ptr = 0x41;
Ptr++;
Size--;
*Ptr = 0xFF;
Ptr++;
Size--;
*Ptr = 0xE3;
Size--;
//
// Double check that our defined size is ok (application error)
//
if (Size < 0) {
ASSERT (FALSE);
return EFI_BUFFER_TOO_SMALL;
}
//
// Add the thunk to the list for this image. Do this last since the add
// function flushes the cache for us.
//
EbcAddImageThunk (ImageHandle, (VOID *) ThunkBase, ThunkSize);
return EFI_SUCCESS;
}
VOID
EbcLLCALLEX (
IN VM_CONTEXT *VmPtr,
IN UINTN FuncAddr,
IN UINTN NewStackPointer,
IN VOID *FramePtr,
IN UINT8 Size
)
/*++
Routine Description:
This function is called to execute an EBC CALLEX instruction.
The function check the callee's content to see whether it is common native
code or a thunk to another piece of EBC code.
If the callee is common native code, use EbcLLCAllEXASM to manipulate,
otherwise, set the VM->IP to target EBC code directly to avoid another VM
be startup which cost time and stack space.
Arguments:
VmPtr - Pointer to a VM context.
FuncAddr - Callee's address
NewStackPointer - New stack pointer after the call
FramePtr - New frame pointer after the call
Size - The size of call instruction
Returns:
None.
--*/
{
UINTN IsThunk;
UINTN TargetEbcAddr;
IsThunk = 1;
TargetEbcAddr = 0;
//
// Processor specific code to check whether the callee is a thunk to EBC.
//
if (*((UINT8 *)FuncAddr) != 0x48) {
IsThunk = 0;
goto Action;
}
if (*((UINT8 *)FuncAddr + 1) != 0xB8) {
IsThunk = 0;
goto Action;
}
if (*((UINT8 *)FuncAddr + 2) != 0xBC) {
IsThunk = 0;
goto Action;
}
if (*((UINT8 *)FuncAddr + 3) != 0x2E) {
IsThunk = 0;
goto Action;
}
if (*((UINT8 *)FuncAddr + 4) != 0x11) {
IsThunk = 0;
goto Action;
}
if (*((UINT8 *)FuncAddr + 5) != 0xCA) {
IsThunk = 0;
goto Action;
}
if (*((UINT8 *)FuncAddr + 6) != 0xBC) {
IsThunk = 0;
goto Action;
}
if (*((UINT8 *)FuncAddr + 7) != 0x2E) {
IsThunk = 0;
goto Action;
}
if (*((UINT8 *)FuncAddr + 8) != 0x11) {
IsThunk = 0;
goto Action;
}
if (*((UINT8 *)FuncAddr + 9) != 0xCA) {
IsThunk = 0;
goto Action;
}
if (*((UINT8 *)FuncAddr + 10) != 0x48) {
IsThunk = 0;
goto Action;
}
if (*((UINT8 *)FuncAddr + 11) != 0xB8) {
IsThunk = 0;
goto Action;
}
CopyMem (&TargetEbcAddr, (UINT8 *)FuncAddr + 12, 8);
Action:
if (IsThunk == 1){
//
// The callee is a thunk to EBC, adjust the stack pointer down 16 bytes and
// put our return address and frame pointer on the VM stack.
// Then set the VM's IP to new EBC code.
//
VmPtr->R[0] -= 8;
VmWriteMemN (VmPtr, (UINTN) VmPtr->R[0], (UINTN) FramePtr);
VmPtr->FramePtr = (VOID *) (UINTN) VmPtr->R[0];
VmPtr->R[0] -= 8;
VmWriteMem64 (VmPtr, (UINTN) VmPtr->R[0], (UINT64) (VmPtr->Ip + Size));
VmPtr->Ip = (VMIP) (UINTN) TargetEbcAddr;
} else {
//
// The callee is not a thunk to EBC, call native code.
//
EbcLLCALLEXNative (FuncAddr, NewStackPointer, FramePtr);
//
// Get return value and advance the IP.
//
VmPtr->R[7] = EbcLLGetReturnValue ();
VmPtr->Ip += Size;
}
}