audk/OldMdePkg/Include/Library/PalCallLib.h

4072 lines
140 KiB
C
Raw Normal View History

/** @file
PAL Call Services
Copyright (c) 2006 -2007, Intel Corporation All rights
reserved. This program and the accompanying materials are
licensed and made available under the terms and conditions of
the BSD License which accompanies this distribution. The full
text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name: PalCallLib.h
**/
#ifndef __PAL_CALL_LIB_H__
#define __PAL_CALL_LIB_H__
#define PAL_SUCCESS 0x0
//
// CacheType of PAL_CACHE_FLUSH.
//
#define PAL_CACHE_FLUSH_INSTRUCTION_ALL 1
#define PAL_CACHE_FLUSH_DATA_ALL 2
#define PAL_CACHE_FLUSH_ALL 3
#define PAL_CACHE_FLUSH_SYNC_TO_DATA 4
//
// Bitmask of Opearation of PAL_CACHE_FLUSH.
//
#define PAL_CACHE_FLUSH_INVALIDATE_LINES BIT0
#define PAL_CACHE_FLUSH_NO_INVALIDATE_LINES 0
#define PAL_CACHE_FLUSH_POLL_INTERRUPT BIT1
#define PAL_CACHE_FLUSH_NO_INTERRUPT 0
/**
PAL Procedure - PAL_CACHE_FLUSH.
Flush the instruction or data caches. It is required by IPF.
The PAL procedure supports the Static Registers calling
convention. It could be called at virtual mode and physical
mode.
@param Index Index of PAL_CACHE_FLUSH within the
list of PAL procedures.
@param CacheType Unsigned 64-bit integer indicating
which cache to flush.
@param Operation Formatted bit vector indicating the
operation of this call.
@param ProgressIndicator Unsigned 64-bit integer specifying
the starting position of the flush
operation.
@return R9 Unsigned 64-bit integer specifying the vector
number of the pending interrupt.
@return R10 Unsigned 64-bit integer specifying the
starting position of the flush operation.
@return R11 Unsigned 64-bit integer specifying the vector
number of the pending interrupt.
@return Status 2 - Call completed without error, but a PMI
was taken during the execution of this
procedure.
@return Status 1 - Call has not completed flushing due to
a pending interrupt.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error
**/
#define PAL_CACHE_FLUSH 1
//
// Attributes of PAL_CACHE_CONFIG_INFO1
//
#define PAL_CACHE_ATTR_WT 0
#define PAL_CACHE_ATTR_WB 1
//
// PAL_CACHE_CONFIG_INFO1.StoreHint
//
#define PAL_CACHE_STORE_TEMPORAL 0
#define PAL_CACHE_STORE_NONE_TEMPORAL 3
//
// PAL_CACHE_CONFIG_INFO1.StoreHint
//
#define PAL_CACHE_STORE_TEMPORAL_LVL_1 0
#define PAL_CACHE_STORE_NONE_TEMPORAL_LVL_ALL 3
//
// PAL_CACHE_CONFIG_INFO1.StoreHint
//
#define PAL_CACHE_LOAD_TEMPORAL_LVL_1 0
#define PAL_CACHE_LOAD_NONE_TEMPORAL_LVL_1 1
#define PAL_CACHE_LOAD_NONE_TEMPORAL_LVL_ALL 3
//
// Detail the characteristics of a given processor controlled
// cache in the cache hierarchy.
//
typedef struct {
UINT64 IsUnified : 1;
UINT64 Attributes : 2;
UINT64 Associativity:8;
UINT64 LineSize:8;
UINT64 Stride:8;
UINT64 StoreLatency:8;
UINT64 StoreHint:8;
UINT64 LoadHint:8;
} PAL_CACHE_INFO_RETURN1;
//
// Detail the characteristics of a given processor controlled
// cache in the cache hierarchy.
//
typedef struct {
UINT64 CacheSize:32;
UINT64 AliasBoundary:8;
UINT64 TagLsBits:8;
UINT64 TagMsBits:8;
} PAL_CACHE_INFO_RETURN2;
/**
PAL Procedure - PAL_CACHE_INFO.
Return detailed instruction or data cache information. It is
required by IPF. The PAL procedure supports the Static
Registers calling convention. It could be called at virtual
mode and physical mode.
@param Index Index of PAL_CACHE_INFO within the list of
PAL procedures.
@param CacheLevel Unsigned 64-bit integer specifying the
level in the cache hierarchy for which
information is requested. This value must
be between 0 and one less than the value
returned in the cache_levels return value
from PAL_CACHE_SUMMARY.
@param CacheType Unsigned 64-bit integer with a value of 1
for instruction cache and 2 for data or
unified cache. All other values are
reserved.
@param Reserved Should be 0.
@return R9 Detail the characteristics of a given
processor controlled cache in the cache
hierarchy. See PAL_CACHE_INFO_RETURN1.
@return R10 Detail the characteristics of a given
processor controlled cache in the cache
hierarchy. See PAL_CACHE_INFO_RETURN2.
@return R11 Reserved with 0.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error
**/
#define PAL_CACHE_INFO 2
//
// Level of PAL_CACHE_INIT.
//
#define PAL_CACHE_INIT_ALL 0xffffffffffffffffULL
//
// CacheType
//
#define PAL_CACHE_INIT_TYPE_INSTRUCTION 0x1
#define PAL_CACHE_INIT_TYPE_DATA 0x2
#define PAL_CACHE_INIT_TYPE_INSTRUCTION_AND_DATA 0x3
//
// Restrict of PAL_CACHE_INIT.
//
#define PAL_CACHE_INIT_NO_RESTRICT 0
#define PAL_CACHE_INIT_RESTRICTED 1
/**
PAL Procedure - PAL_CACHE_INIT.
Initialize the instruction or data caches. It is required by
IPF. The PAL procedure supports the Static Registers calling
convention. It could be called at physical mode.
@param Index Index of PAL_CACHE_INIT within the list of PAL
procedures.
@param Level Unsigned 64-bit integer containing the level of
cache to initialize. If the cache level can be
initialized independently, only that level will
be initialized. Otherwise
implementation-dependent side-effects will
occur.
@param CacheType Unsigned 64-bit integer with a value of 1 to
initialize the instruction cache, 2 to
initialize the data cache, or 3 to
initialize both. All other values are
reserved.
@param Restrict Unsigned 64-bit integer with a value of 0 or
1. All other values are reserved. If
restrict is 1 and initializing the specified
level and cache_type of the cache would
cause side-effects, PAL_CACHE_INIT will
return -4 instead of initializing the cache.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -4 - Call could not initialize the specified
level and cache_type of the cache without
side-effects and restrict was 1.
**/
#define PAL_CACHE_INIT 3
//
// PAL_CACHE_PROTECTION.Method.
//
#define PAL_CACHE_PROTECTION_NONE_PROTECT 0
#define PAL_CACHE_PROTECTION_ODD_PROTECT 1
#define PAL_CACHE_PROTECTION_EVEN_PROTECT 2
#define PAL_CACHE_PROTECTION_ECC_PROTECT 3
//
// PAL_CACHE_PROTECTION.TagOrData.
//
#define PAL_CACHE_PROTECTION_PROTECT_DATA 0
#define PAL_CACHE_PROTECTION_PROTECT_TAG 1
#define PAL_CACHE_PROTECTION_PROTECT_TAG_ANDTHEN_DATA 2
#define PAL_CACHE_PROTECTION_PROTECT_DATA_ANDTHEN_TAG 3
//
// 32-bit protection information structures.
//
typedef struct {
UINT32 DataBits:8;
UINT32 TagProtLsb:6;
UINT32 TagProtMsb:6;
UINT32 ProtBits:6;
UINT32 Method:4;
UINT32 TagOrData:2;
} PAL_CACHE_PROTECTION;
/**
PAL Procedure - PAL_CACHE_PROT_INFO.
Return instruction or data cache protection information. It is
required by IPF. The PAL procedure supports the Static
Registers calling convention. It could be called at physical
mode and Virtual mode.
@param Index Index of PAL_CACHE_PROT_INFO within the list of
PAL procedures.
@param CacheLevel Unsigned 64-bit integer specifying the level
in the cache hierarchy for which information
is requested. This value must be between 0
and one less than the value returned in the
cache_levels return value from
PAL_CACHE_SUMMARY.
@param CacheType Unsigned 64-bit integer with a value of 1
for instruction cache and 2 for data or
unified cache. All other values are
reserved.
@return R9 Detail the characteristics of a given
processor controlled cache in the cache
hierarchy. See PAL_CACHE_PROTECTION[0..1].
@return R10 Detail the characteristics of a given
processor controlled cache in the cache
hierarchy. See PAL_CACHE_PROTECTION[2..3].
@return R11 Detail the characteristics of a given
processor controlled cache in the cache
hierarchy. See PAL_CACHE_PROTECTION[4..5].
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_CACHE_PROT_INFO 38
/**
@param ThreadId The thread identifier of the logical
processor for which information is being
returned. This value will be unique on a per
core basis.
@param CoreId The core identifier of the logical processor
for which information is being returned.
This value will be unique on a per physical
processor package basis.
**/
typedef struct {
UINT64 ThreadId : 16;
UINT64 Reserved1: 16;
UINT64 CoreId: 16;
UINT64 Reserved2: 16;
} PAL_PCOC_N_CACHE_INFO1;
/**
@param LogicalAddress Logical address: geographical address
of the logical processor for which
information is being returned. This is
the same value that is returned by the
PAL_FIXED_ADDR procedure when it is
called on the logical processor.
**/
typedef struct {
UINT64 LogicalAddress : 16;
UINT64 Reserved1: 16;
UINT64 Reserved2: 32;
} PAL_PCOC_N_CACHE_INFO2;
/**
PAL Procedure - PAL_CACHE_SHARED_INFO.
Returns information on which logical processors share caches.
It is optional. The PAL procedure supports the Static
Registers calling convention. It could be called at physical
mode and Virtual mode.
@param Index Index of PAL_CACHE_SHARED_INFO within the list
of PAL procedures.
@param CacheLevel Unsigned 64-bit integer specifying the
level in the cache hierarchy for which
information is requested. This value must
be between 0 and one less than the value
returned in the cache_levels return value
from PAL_CACHE_SUMMARY.
@param CacheType Unsigned 64-bit integer with a value of 1
for instruction cache and 2 for data or
unified cache. All other values are
reserved.
@param ProcNumber Unsigned 64-bit integer that specifies for
which logical processor information is
being requested. This input argument must
be zero for the first call to this
procedure and can be a maximum value of
one less than the number of logical
processors sharing this cache, which is
returned by the num_shared return value.
@return R9 Unsigned integer that returns the number of
logical processors that share the processor
cache level and type, for which information was
requested.
@return R10 The format of PAL_PCOC_N_CACHE_INFO1.
@return R11 The format of PAL_PCOC_N_CACHE_INFO2.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_CACHE_SHARED_INFO 43
/**
PAL Procedure - PAL_CACHE_SUMMARY.
Return a summary of the cache hierarchy. It is required by
IPF. The PAL procedure supports the Static Registers calling
convention. It could be called at physical mode and Virtual
mode.
@param Index Index of PAL_CACHE_SUMMARY within the list of
PAL procedures.
@return R9 CacheLevels Unsigned 64-bit integer denoting the
number of levels of cache
implemented by the processor.
Strictly, this is the number of
levels for which the cache
controller is integrated into the
processor (the cache SRAMs may be
external to the processor).
@return R10 UniqueCaches Unsigned 64-bit integer denoting the
number of unique caches implemented
by the processor. This has a maximum
of 2*cache_levels, but may be less
if any of the levels in the cache
hierarchy are unified caches or do
not have both instruction and data
caches.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_CACHE_SUMMARY 4
//
// Virtual Memory Attributes implemented by processor.
//
#define PAL_MEMORY_ATTR_WB 0
#define PAL_MEMORY_ATTR_WC 6
#define PAL_MEMORY_ATTR_UC 4
#define PAL_MEMORY_ATTR_UCE 5
#define PAL_MEMORY_ATTR_NATPAGE 7
/**
PAL Procedure - PAL_MEM_ATTRIB.
Return a list of supported memory attributes.. It is required
by IPF. The PAL procedure supports the Static Registers calling
convention. It could be called at physical mode and Virtual
mode.
@param Index Index of PAL_MEM_ATTRIB within the list of PAL
procedures.
@return R9 Attributes 8-bit vector of memory attributes
implemented by processor. See Virtual
Memory Attributes above.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_MEM_ATTRIB 5
/**
PAL Procedure - PAL_PREFETCH_VISIBILITY.
Used in architected sequence to transition pages from a
cacheable, speculative attribute to an uncacheable attribute.
It is required by IPF. The PAL procedure supports the Static
Registers calling convention. It could be called at physical
mode and Virtual mode.
@param Index Index of PAL_PREFETCH_VISIBILITY within the list
of PAL procedures.
@param TransitionType Unsigned integer specifying the type
of memory attribute transition that is
being performed.
@return Status 1 Call completed without error; this
call is not necessary on remote
processors.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_PREFETCH_VISIBILITY 41
/**
PAL Procedure - PAL_PTCE_INFO.
Return information needed for ptc.e instruction to purge
entire TC. It is required by IPF. The PAL procedure supports
the Static Registers calling convention. It could be called at
physical mode and Virtual mode.
@param Index Index of PAL_PTCE_INFO within the list
of PAL procedures.
@return R9 Unsigned 64-bit integer denoting the beginning
address to be used by the first PTCE instruction
in the purge loop.
@return R10 Two unsigned 32-bit integers denoting the loop
counts of the outer (loop 1) and inner (loop 2)
purge loops. count1 (loop 1) is contained in bits
63:32 of the parameter, and count2 (loop 2) is
contained in bits 31:0 of the parameter.
@return R11 Two unsigned 32-bit integers denoting the loop
strides of the outer (loop 1) and inner (loop 2)
purge loops. stride1 (loop 1) is contained in bits
63:32 of the parameter, and stride2 (loop 2) is
contained in bits 31:0 of the parameter.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_PTCE_INFO 6
/**
@param NumberSets Unsigned 8-bit integer denoting the number
of hash sets for the specified level
(1=fully associative)
@param NumberWays Unsigned 8-bit integer denoting the
associativity of the specified level
(1=direct).
@param NumberEntries Unsigned 16-bit integer denoting the
number of entries in the specified TC.
@param PageSizeIsOptimized Flag denoting whether the
specified level is optimized for
the region's preferred page size
(1=optimized) tc_pages indicates
which page sizes are usable by
this translation cache.
@param TcIsUnified Flag denoting whether the specified TC is
unified (1=unified).
@param EntriesReduction Flag denoting whether installed
translation registers will reduce
the number of entries within the
specified TC.
**/
typedef struct {
UINT64 NumberSets:8;
UINT64 NumberWays:8;
UINT64 NumberEntries:16;
UINT64 PageSizeIsOptimized:1;
UINT64 TcIsUnified:1;
UINT64 EntriesReduction:1;
} PAL_TC_INFO;
/**
PAL Procedure - PAL_VM_INFO.
Return detailed information about virtual memory features
supported in the processor. It is required by IPF. The PAL
procedure supports the Static Registers calling convention. It
could be called at physical mode and Virtual mode.
@param Index Index of PAL_VM_INFO within the list
of PAL procedures.
@param TcLevel Unsigned 64-bit integer specifying the level
in the TLB hierarchy for which information is
required. This value must be between 0 and one
less than the value returned in the
vm_info_1.num_tc_levels return value from
PAL_VM_SUMMARY.
@param TcType Unsigned 64-bit integer with a value of 1 for
instruction translation cache and 2 for data
or unified translation cache. All other values
are reserved.
@return R9 8-byte formatted value returning information
about the specified TC. See PAL_TC_INFO above.
@return R10 64-bit vector containing a bit for each page
size supported in the specified TC, where bit
position n indicates a page size of 2**n.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_VM_INFO 7
/**
PAL Procedure - PAL_VM_PAGE_SIZE.
Return virtual memory TC and hardware walker page sizes
supported in the processor. It is required by IPF. The PAL
procedure supports the Static Registers calling convention. It
could be called at physical mode and Virtual mode.
@param Index Index of PAL_VM_PAGE_SIZE within the list
of PAL procedures.
@return R9 64-bit vector containing a bit for each
architected page size that is supported for
TLB insertions and region registers.
@return R10 64-bit vector containing a bit for each
architected page size supported for TLB purge
operations.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_VM_PAGE_SIZE 34
/**
@param WalkerPresent 1-bit flag indicating whether a hardware
TLB walker is implemented (1 = walker
present).
@param WidthOfPhysicalAddress Unsigned 7-bit integer
denoting the number of bits of
physical address implemented.
@param WidthOfKey Unsigned 8-bit integer denoting the number
of bits mplemented in the PKR.key field.
@param MaxPkrIndex Unsigned 8-bit integer denoting the
maximum PKR index (number of PKRs-1).
@param HashTagId Unsigned 8-bit integer which uniquely
identifies the processor hash and tag
algorithm.
@param MaxDtrIndex Unsigned 8 bit integer denoting the
maximum data translation register index
(number of dtr entries - 1).
@param MaxItrIndex Unsigned 8 bit integer denoting the
maximum instruction translation register
index (number of itr entries - 1).
@param NumberOfUniqueTc Unsigned 8-bit integer denoting the
number of unique TCs implemented.
This is a maximum of
2*num_tc_levels.
@param NumberOfTcLevels Unsigned 8-bit integer denoting the
number of TC levels.
**/
typedef struct {
UINT64 WalkerPresent:1;
UINT64 WidthOfPhysicalAddress: 7;
UINT64 WidthOfKey:8;
UINT64 MaxPkrIndex:8;
UINT64 HashTagId:8;
UINT64 MaxDtrIndex:8;
UINT64 MaxItrIndex:8;
UINT64 NumberOfUniqueTc:8;
UINT64 NumberOfTcLevels:8;
} PAL_VM_INFO1;
/**
@param WidthOfVirtualAddress Unsigned 8-bit integer denoting
is the total number of virtual
address bits - 1.
@param WidthOfRid Unsigned 8-bit integer denoting the number
of bits implemented in the RR.rid field.
@param MaxPurgedTlbs Unsigned 16 bit integer denoting the
maximum number of concurrent outstanding
TLB purges allowed by the processor. A
value of 0 indicates one outstanding
purge allowed. A value of 216-1
indicates no limit on outstanding
purges. All other values indicate the
actual number of concurrent outstanding
purges allowed.
**/
typedef struct {
UINT64 WidthOfVirtualAddress:8;
UINT64 WidthOfRid:8;
UINT64 MaxPurgedTlbs:16;
UINT64 Reserved:32;
} PAL_VM_INFO2;
/**
PAL Procedure - PAL_VM_SUMMARY.
Return summary information about virtual memory features
supported in the processor. It is required by IPF. The PAL
procedure supports the Static Registers calling convention. It
could be called at physical mode and Virtual mode.
@param Index Index of PAL_VM_SUMMARY within the list
of PAL procedures.
@return R9 8-byte formatted value returning global virtual
memory information. See PAL_VM_INFO1 above.
@return R10 8-byte formatted value returning global virtual
memory information. See PAL_VM_INFO2 above.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_VM_SUMMARY 8
//
// Bit mask of TR_valid flag.
//
#define PAL_TR_ACCESS_RIGHT_IS_VALID BIT0
#define PAL_TR_PRIVILEGE_LEVEL_IS_VALID BIT1
#define PAL_TR_DIRTY_IS_VALID BIT2
#define PAL_TR_MEMORY_ATTR_IS_VALID BIT3
/**
PAL Procedure - PAL_VM_TR_READ.
Read contents of a translation register. It is required by
IPF. The PAL procedure supports the Stacked Register calling
convention. It could be called at physical mode.
@param Index Index of PAL_VM_TR_READ within the list
of PAL procedures.
@param RegNumber Unsigned 64-bit number denoting which TR to
read.
@param TrType Unsigned 64-bit number denoting whether to
read an ITR (0) or DTR (1). All other values
are reserved.
@param TrBuffer 64-bit pointer to the 32-byte memory buffer in
which translation data is returned.
@return R9 Formatted bit vector denoting which fields are
valid. See TR_valid above.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_VM_TR_READ 261
//
// Bit Mask of Processor Bus Fesatures .
//
/**
When 0, bus data errors are detected and single bit errors are
corrected. When 1, no error detection or correction is done.
**/
#define PAL_BUS_DISABLE_DATA_ERROR_SIGNALLING BIT63
/**
When 0, bus address errors are signalled on the bus. When 1,
no bus errors are signalled on the bus. If Disable Bus Address
Error Checking is 1, this bit is ignored.
**/
#define PAL_BUS_DISABLE_ADDRESS_ERROR_SIGNALLING BIT62
/**
When 0, bus errors are detected, single bit errors are
corrected., and a CMCI or MCA is generated internally to the
processor. When 1, no bus address errors are detected or
corrected.
**/
#define PAL_BUS_DISABLE_ADDRESS_ERROR_CHECK BIT61
/**
When 0, bus protocol errors (BINIT#) are signaled by the
processor on the bus. When 1, bus protocol errors (BINIT#) are
not signaled on the bus. If Disable Bus Initialization Event
Checking is 1, this bit is ignored.
**/
#define PAL_BUS_DISABLE_INITIALIZATION_EVENT_SIGNALLING BIT60
/**
When 0, bus protocol errors (BINIT#) are detected and sampled
and an MCA is generated internally to the processor. When 1,
the processor will ignore bus protocol error conditions
(BINIT#).
**/
#define PAL_BUS_DISABLE_INITIALIZATION_EVENT_CHECK BIT59
/**
When 0, BERR# is signalled if a bus error is detected. When 1,
bus errors are not signalled on the bus.
**/
#define PAL_BUS_DISABLE_ERROR_SIGNALLING BIT58
/**
When 0, BERR# is signalled when internal processor requestor
initiated bus errors are detected. When 1, internal requester
bus errors are not signalled on the bus.
**/
#define PAL_BUS_DISABLE__INTERNAL_ERROR_SIGNALLING BIT57
/**
When 0, the processor takes an MCA if BERR# is asserted. When
1, the processor ignores the BERR# signal.
**/
#define PAL_BUS_DISABLE_ERROR_CHECK BIT56
/**
When 0, the processor asserts BINIT# if it detects a parity
error on the signals which identify the transactions to which
this is a response. When 1, the processor ignores parity on
these signals.
**/
#define PAL_BUS_DISABLE_RSP_ERROR_CHECK BIT55
/**
When 0, the in-order transaction queue is limited only by the
number of hardware entries. When 1, the processor's in-order
transactions queue is limited to one entry.
**/
#define PAL_BUS_DISABLE_TRANSACTION_QUEUE BIT54
/**
Enable a bus cache line replacement transaction when a cache
line in the exclusive state is replaced from the highest level
processor cache and is not present in the lower level processor
caches. When 0, no bus cache line replacement transaction will
be seen on the bus. When 1, bus cache line replacement
transactions will be seen on the bus when the above condition is
detected.
**/
#define PAL_BUS_ENABLE_EXCLUSIVE_CACHE_LINE_REPLACEMENT BIT53
/**
Enable a bus cache line replacement transaction when a cache
line in the shared or exclusive state is replaced from the
highest level processor cache and is not present in the lower
level processor caches.
When 0, no bus cache line replacement transaction will be seen
on the bus. When 1, bus cache line replacement transactions
will be seen on the bus when the above condition is detected.
**/
#define PAL_BUS_ENABLE_SHARED_CACHE_LINE_REPLACEMENT BIT52
/**
When 0, the data bus is configured at the 2x data transfer
rate.When 1, the data bus is configured at the 1x data
transfer rate, 30 Opt. Req. Disable Bus Lock Mask. When 0, the
processor executes locked transactions atomically. When 1, the
processor masks the bus lock signal and executes locked
transactions as a non-atomic series of transactions.
**/
#define PAL_BUS_ENABLE_HALF_TRANSFER BIT30
/**
When 0, the processor will deassert bus request when finished
with each transaction. When 1, the processor will continue to
assert bus request after it has finished, if it was the last
agent to own the bus and if there are no other pending
requests.
**/
#define PAL_BUS_REQUEST_BUS_PARKING BIT29
/**
PAL Procedure - PAL_BUS_GET_FEATURES.
Return configurable processor bus interface features and their
current settings. It is required by IPF. The PAL procedure
supports the Stacked Register calling convention. It could be
called at physical mode.
@param Index Index of PAL_BUS_GET_FEATURES within the list
of PAL procedures.
@return R9 64-bit vector of features implemented.
(1=implemented, 0=not implemented)
@return R10 64-bit vector of current feature settings.
@return R11 64-bit vector of features controllable by
software. (1=controllable, 0= not controllable)
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_BUS_GET_FEATURES 9
/**
PAL Procedure - PAL_BUS_SET_FEATURES.
Enable or disable configurable features in processor bus
interface. It is required by IPF. It is required by IPF. The PAL procedure
supports the Static Registers calling convention. It could be
called at physical mode.
@param Index Index of PAL_BUS_SET_FEATURES within the list
of PAL procedures.
@param FeatureSelect 64-bit vector denoting desired state of
each feature (1=select, 0=non-select).
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_BUS_SET_FEATURES 10
/**
PAL Procedure - PAL_DEBUG_INFO.
Return the number of instruction and data breakpoint
registers. It is required by IPF. It is required by IPF. The
PAL procedure supports the Static Registers calling
convention. It could be called at physical mode and virtual
mode.
@param Index Index of PAL_DEBUG_INFO within the list of PAL
procedures.
@return R9 Unsigned 64-bit integer denoting the number of
pairs of instruction debug registers implemented
by the processor.
@return R10 Unsigned 64-bit integer denoting the number of
pairs of data debug registers implemented by the
processor.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_DEBUG_INFO 11
/**
PAL Procedure - PAL_FIXED_ADDR.
Return the fixed component of a processor<EFBFBD><EFBFBD>s directed address.
It is required by IPF. It is required by IPF. The PAL
procedure supports the Static Registers calling convention. It
could be called at physical mode and virtual mode.
@param Index Index of PAL_FIXED_ADDR within the list of PAL
procedures.
@return R9 Fixed geographical address of this processor.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_FIXED_ADDR 12
/**
PAL Procedure - PAL_FREQ_BASE.
Return the frequency of the output clock for use by the
platform, if generated by the processor. It is optinal. The
PAL procedure supports the Static Registers calling
convention. It could be called at physical mode and virtual
mode.
@param Index Index of PAL_FREQ_BASE within the list of PAL
procedures.
@return R9 Base frequency of the platform if generated by the
processor chip.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_FREQ_BASE 13
/**
PAL Procedure - PAL_FREQ_RATIOS.
Return ratio of processor, bus, and interval time counter to
processor input clock or output clock for platform use, if
generated by the processor. It is required by IPF. The PAL
procedure supports the Static Registers calling convention. It
could be called at physical mode and virtual mode.
@param Index Index of PAL_FREQ_RATIOS within the list of PAL
procedures.
@return R9 Ratio of the processor frequency to the input
clock of the processor, if the platform clock is
generated externally or to the output clock to the
platform, if the platform clock is generated by
the processor.
@return R10 Ratio of the bus frequency to the input clock of
the processor, if the platform clock is generated
externally or to the output clock to the platform,
if the platform clock is generated by the
processor.
@return R11 Ratio of the interval timer counter rate to input
clock of the processor, if the platform clock is
generated externally or to the output clock to the
platform, if the platform clock is generated by
the processor.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_FREQ_RATIOS 14
/**
@param NumberOfLogicalProcessors Total number of logical
processors on this physical
processor package that are
enabled.
@param ThreadsPerCore Number of threads per core.
@param CoresPerProcessor Total number of cores on this
physical processor package.
@param PhysicalProcessorPackageId Physical processor package
identifier which was
assigned at reset by the
platform or bus
controller. This value may
or may not be unique
across the entire platform
since it depends on the
platform vendor's policy.
**/
typedef struct {
UINT64 NumberOfLogicalProcessors:16;
UINT64 ThreadsPerCore:8;
UINT64 Reserved1:8;
UINT64 CoresPerProcessor;
UINT64 Reserved2:8;
UINT64 PhysicalProcessorPackageId:8;
UINT64 Reserved3:8;
} PAL_LOGICAL_PROCESSPR_OVERVIEW;
/**
@param ThreadId The thread identifier of the logical
processor for which information is being
returned. This value will be unique on a per
core basis.
@param CoreId The core identifier of the logical processor
for which information is being returned.
This value will be unique on a per physical
processor package basis.
**/
typedef struct {
UINT64 ThreadId:16;
UINT64 Reserved1:16;
UINT64 CoreId:16;
UINT64 Reserved2:16;
} PAL_LOGICAL_PROCESSORN_INFO1;
/**
@param LogicalAddress Geographical address of the logical
processor for which information is being
returned. This is the same value that is
returned by the PAL_FIXED_ADDR procedure
when it is called on the logical
processor.
**/
typedef struct {
UINT64 LogicalAddress:16;
UINT64 Reserved:48;
} PAL_LOGICAL_PROCESSORN_INFO2;
/**
PAL Procedure - PAL_LOGICAL_TO_PHYSICAL.
Return information on which logical processors map to a
physical processor die. It is optinal. The PAL procedure
supports the Static Registers calling convention. It could be
called at physical mode and virtual mode.
@param Index Index of PAL_LOGICAL_TO_PHYSICAL within the list of PAL
procedures.
@param ProcessorNumber Signed 64-bit integer that specifies
for which logical processor
information is being requested. When
this input argument is -1, information
is returned about the logical
processor on which the procedure call
is made. This input argument must be
in the range of 1 up to one less than
the number of logical processors
returned by num_log in the
log_overview return value.
@return R9 The format of PAL_LOGICAL_PROCESSPR_OVERVIEW.
@return R10 The format of PAL_LOGICAL_PROCESSORN_INFO1.
@return R11 The format of PAL_LOGICAL_PROCESSORN_INFO2.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_LOGICAL_TO_PHYSICAL 42
/**
@param NumberOfPmcPairs Unsigned 8-bit number defining the
number of generic PMC/PMD pairs.
@param WidthOfCounter Unsigned 8-bit number in the range
0:60 defining the number of
implemented counter bits.
@param TypeOfCycleCounting Unsigned 8-bit number defining the
event type for counting processor
cycles.
@param TypeOfRetiredInstructionBundle Retired Unsigned 8-bit
number defining the
event type for retired
instruction bundles.
**/
typedef struct {
UINT64 NumberOfPmcPairs:8;
UINT64 WidthOfCounter:8;
UINT64 TypeOfCycleCounting:8;
UINT64 TypeOfRetiredInstructionBundle:8;
UINT64 Reserved:32;
} PAL_PERFORMANCE_INFO;
/**
PAL Procedure - PAL_PERF_MON_INFO.
Return the number and type of performance monitors. It is
required by IPF. The PAL procedure supports the Static
Registers calling convention. It could be called at physical
mode and virtual mode.
@param Index Index of PAL_PERF_MON_INFO within the list of
PAL procedures.
@param PerformanceBuffer An address to an 8-byte aligned
128-byte memory buffer.
@return R9 Information about the performance monitors
implemented. See PAL_PERFORMANCE_INFO;
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_PERF_MON_INFO 15
#define PAL_PLATFORM_ADDR_INTERRUPT_BLOCK_TOKEN 0x0
#define PAL_PLATFORM_ADDR_IO_BLOCK_TOKEN 0x1
/**
PAL Procedure - PAL_PLATFORM_ADDR.
Specify processor interrupt block address and I/O port space
address. It is required by IPF. The PAL procedure supports the
Static Registers calling convention. It could be called at
physical mode and virtual mode.
@param Index Index of PAL_PLATFORM_ADDR within the list of
PAL procedures.
@param Type Unsigned 64-bit integer specifying the type of
block. 0 indicates that the processor interrupt
block pointer should be initialized. 1 indicates
that the processor I/O block pointer should be
initialized.
@param Address Unsigned 64-bit integer specifying the address
to which the processor I/O block or interrupt
block shall be set. The address must specify
an implemented physical address on the
processor model, bit 63 is ignored.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure.
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_PLATFORM_ADDR 16
/**
@param EnableBerrPromotion Bit63. Enable BERR promotion. When
1, the Bus Error (BERR) signal is
promoted to the Bus Initialization
(BINIT) signal, and the BINIT pin
is asserted on the occurrence of
each Bus Error. Setting this bit
has no effect if BINIT signalling
is disabled. (See
PAL_BUS_GET/SET_FEATURES)
@param EnableMcaPromotion Bit62, Enable MCA promotion. When
1, machine check aborts (MCAs) are
promoted to the Bus Error signal,
and the BERR pin is assert on each
occurrence of an MCA. Setting this
bit has no effect if BERR
signalling is disabled. (See
PAL_BUS_GET/SET_FEATURES)
@param EnableMcaToBinitPromotion Bit61, Enable MCA to BINIT
promotion. When 1, machine
check aborts (MCAs) are
promoted to the Bus
Initialization signal, and
the BINIT pin is assert on
each occurrence of an MCA.
Setting this bit has no
effect if BINIT signalling
is disabled. (See
PAL_BUS_GET/SET_FEATURES)
@param EnableCmciPromotion Bit60, Enable CMCI promotion When
1, Corrected Machine Check
Interrupts (CMCI) are promoted to
MCAs. They are also further
promoted to BERR if bit 39, Enable
MCA promotion, is also set and
they are promoted to BINIT if bit
38, Enable MCA to BINIT promotion,
is also set. This bit has no
effect if MCA signalling is
disabled (see
PAL_BUS_GET/SET_FEATURES)
@param DisableCache Bit59, Disable Cache. When 0, the
processor performs cast outs on
cacheable pages and issues and responds
to coherency requests normally. When 1,
the processor performs a memory access
for each reference regardless of cache
contents and issues no coherence
requests and responds as if the line
were not present. Cache contents cannot
be relied upon when the cache is
disabled. WARNING: Semaphore
instructions may not be atomic or may
cause Unsupported Data Reference faults
if caches are disabled.
@param DisableCoherency Bit58, Disable Coherency. When 0,
the processor uses normal coherency
requests and responses. When 1, the
processor answers all requests as if
the line were not present.
@param DisableDPM Bit57, Disable Dynamic Power Management
(DPM). When 0, the hardware may reduce
power consumption by removing the clock
input from idle functional units. When 1,
all functional units will receive clock
input, even when idle.
@param DisableBinitWithTimeout Bit56, Disable a BINIT on
internal processor time-out.
When 0, the processor may
generate a BINIT on an
internal processor time-out.
When 1, the processor will not
generate a BINIT on an
internal processor time-out.
The event is silently ignored.
@param EnableEnvNotification Bit55, Enable external
notification when the processor
detects hardware errors caused
by environmental factors that
could cause loss of
deterministic behavior of the
processor. When 1, this bit will
enable external notification,
when 0 external notification is
not provided. The type of
external notification of these
errors is processor-dependent. A
loss of processor deterministic
behavior is considered to have
occurred if these
environmentally induced errors
cause the processor to deviate
from its normal execution and
eventually causes different
behavior which can be observed
at the processor bus pins.
Processor errors that do not
have this effects (i.e.,
software induced machine checks)
may or may not be promoted
depending on the processor
implementation.
@param EnableVmsw Bit54, Enable the use of the vmsw
instruction. When 0, the vmsw instruction
causes a Virtualization fault when
executed at the most privileged level.
When 1, this bit will enable normal
operation of the vmsw instruction.
@param EnableMcaOnDataPoisoning Bit53, Enable MCA signaling
on data-poisoning event
detection. When 0, a CMCI
will be signaled on error
detection. When 1, an MCA
will be signaled on error
detection. If this feature
is not supported, then the
corresponding argument is
ignored when calling
PAL_PROC_SET_FEATURES. Note
that the functionality of
this bit is independent of
the setting in bit 60
(Enable CMCI promotion), and
that the bit 60 setting does
not affect CMCI signaling
for data-poisoning related
events. Volume 2: Processor
Abstraction Layer 2:431
PAL_PROC_GET_FEATURES
@param DisablePState Bit52, Disable P-states. When 1, the PAL
P-state procedures (PAL_PSTATE_INFO,
PAL_SET_PSTATE, PAL_GET_PSTATE) will
return with a status of -1
(Unimplemented procedure).
@param DisableBranchPrediction Bit47, Disable Dynamic branch
prediction. When 0, the
processor may predict branch
targets and speculatively
execute, but may not commit
results. When 1, the processor
must wait until branch targets
are known to execute.
@param DisableDynamicInsCachePrefetch Bit46, Disable
DynamicInstruction Cache
Prefetch. When 0, the
processor may prefetch
into the caches any
instruction which has
not been executed, but
whose execution is
likely. When 1,
instructions may not be
fetched until needed or
hinted for execution.
(Prefetch for a hinted
branch is allowed even
when dynamic instruction
cache prefetch is
disabled.)
@param DisableDynamicDataCachePrefetch Bit45, Disable Dynamic
Data Cache Prefetch.
When 0, the processor
may prefetch into the
caches any data which
has not been accessed
by instruction
execution, but which
is likely to be
accessed. When 1, no
data may be fetched
until it is needed for
instruction execution
or is fetched by an
lfetch instruction.
@param DisableSpontaneousDeferral Bit44, Disable Spontaneous
Deferral. When 1, the
processor may optionally
defer speculative loads
that do not encounter any
exception conditions, but
that trigger other
implementation-dependent
conditions (e.g., cache
miss). When 0, spontaneous
deferral is disabled.
@param DisableDynamicPrediction Bit43, Disable Dynamic
Predicate Prediction. When
0, the processor may predict
predicate results and
execute speculatively, but
may not commit results until
the actual predicates are
known. When 1, the processor
shall not execute predicated
instructions until the
actual predicates are known.
@param NoXr1ThroughXr3 Bit42, No XR1 through XR3 implemented.
Denotes whether XR1 XR3 are
implemented for machine check
recovery. This feature may only be
interrogated by PAL_PROC_GET_FEATURES.
It may not be enabled or disabled by
PAL_PROC_SET_FEATURES. The
corresponding argument is ignored.
@param NoXipXpsrXfs Bit41, No XIP, XPSR, and XFS
implemented. Denotes whether XIP, XPSR,
and XFS are implemented for machine
check recovery. This feature may only be
interrogated by PAL_PROC_GET_FEATURES.
It may not be enabled or disabled by
PAL_PROC_SET_FEATURES. The corresponding
argument is ignored.
@param NoVM Bit40, No Virtual Machine features implemented.
Denotes whether PSR.vm is implemented. This
feature may only be interrogated by
PAL_PROC_GET_FEATURES. It may not be enabled or
disabled by PAL_PROC_SET_FEATURES. The
corresponding argument is ignored.
@param NoVariablePState Bit39, No Variable P-state
performance: A value of 1, indicates
that a processor implements
techniques to optimize performance
for the given P-state power budget
by dynamically varying the
frequency, such that maximum
performance is achieved for the
power budget. A value of 0,
indicates that P-states have no
frequency variation or very small
frequency variations for their given
power budget. This feature may only
be interrogated by
PAL_PROC_GET_FEATURES. it may not be
enabled or disabled by
PAL_PROC_SET_FEATURES. The
corresponding argument is ignored.
@param NoSimpleImpInUndefinedIns Bit38, No Simple
implementation of
unimplemented instruction
addresses. Denotes how an
unimplemented instruction
address is recorded in IIP
on an Unimplemented
Instruction Address trap or
fault. When 1, the full
unimplemented address is
recorded in IIP; when 0, the
address is sign extended
(virtual addresses) or zero
extended (physical
addresses). This feature may
only be interrogated by
PAL_PROC_GET_FEATURES. It
may not be enabled or
disabled by
PAL_PROC_SET_FEATURES. The
corresponding argument is
ignored.
@param NoPresentPmi Bit37, No INIT, PMI, and LINT pins
present. Denotes the absence of INIT,
PMI, LINT0 and LINT1 pins on the
processor. When 1, the pins are absent.
When 0, the pins are present. This
feature may only be interrogated by
PAL_PROC_GET_FEATURES. It may not be
enabled or disabled by
PAL_PROC_SET_FEATURES. The corresponding
argument is ignored.
@param FaultInUndefinedIns Bit36, No Unimplemented
instruction address reported as
fault. Denotes how the processor
reports the detection of
unimplemented instruction
addresses. When 1, the processor
reports an Unimplemented
Instruction Address fault on the
unimplemented address; when 0, it
reports an Unimplemented
Instruction Address trap on the
previous instruction in program
order. This feature may only be
interrogated by
PAL_PROC_GET_FEATURES. It may not
be enabled or disabled by
PAL_PROC_SET_FEATURES. The
corresponding argument is
ignored.
**/
typedef struct {
UINT64 Reserved1:36;
UINT64 FaultInUndefinedIns:1;
UINT64 NoPresentPmi:1;
UINT64 NoSimpleImpInUndefinedIns:1;
UINT64 NoVariablePState:1;
UINT64 NoVM:1;
UINT64 NoXipXpsrXfs:1;
UINT64 NoXr1ThroughXr3:1;
UINT64 DisableDynamicPrediction:1;
UINT64 DisableSpontaneousDeferral:1;
UINT64 DisableDynamicDataCachePrefetch:1;
UINT64 DisableDynamicInsCachePrefetch:1;
UINT64 DisableBranchPrediction:1;
UINT64 Reserved2:4;
UINT64 DisablePState:1;
UINT64 EnableMcaOnDataPoisoning:1;
UINT64 EnableVmsw:1;
UINT64 EnableEnvNotification:1;
UINT64 DisableBinitWithTimeout:1;
UINT64 DisableDPM:1;
UINT64 DisableCoherency:1;
UINT64 DisableCache:1;
UINT64 EnableCmciPromotion:1;
UINT64 EnableMcaToBinitPromotion:1;
UINT64 EnableMcaPromotion:1;
UINT64 EnableBerrPromotion:1;
} PAL_PROCESSOR_FEATURES;
/**
PAL Procedure - PAL_PROC_GET_FEATURES.
Return configurable processor features and their current
setting. It is required by IPF. The PAL procedure supports the
Static Registers calling convention. It could be called at
physical mode and virtual mode.
@param Index Index of PAL_PROC_GET_FEATURES within the list of
PAL procedures.
@param Reserved Reserved parameter.
@param FeatureSet Feature set information is being requested
for.
@return R9 64-bit vector of features implemented. See
PAL_PROCESSOR_FEATURES.
@return R10 64-bit vector of current feature settings. See
PAL_PROCESSOR_FEATURES.
@return R11 64-bit vector of features controllable by
software.
@return Status 1 - Call completed without error; The
feature_set passed is not supported but a
feature_set of a larger value is supported.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -8 - feature_set passed is beyond the maximum
feature_set supported
**/
#define PAL_PROC_GET_FEATURES 17
/**
PAL Procedure - PAL_PROC_SET_FEATURES.
Enable or disable configurable processor features. It is
required by IPF. The PAL procedure supports the Static
Registers calling convention. It could be called at physical
mode.
@param Index Index of PAL_PROC_SET_FEATURES within the list of
PAL procedures.
@param FeatureSelect 64-bit vector denoting desired state of
each feature (1=select, 0=non-select).
@param FeatureSet Feature set to apply changes to. See
PAL_PROC_GET_FEATURES for more information
on feature sets.
@return Status 1 - Call completed without error; The
feature_set passed is not supported but a
feature_set of a larger value is supported
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -8 - feature_set passed is beyond the maximum
feature_set supported
**/
#define PAL_PROC_SET_FEATURES 18
//
// Value of PAL_REGISTER_INFO.InfoRequest.
//
#define PAL_APPLICATION_REGISTER_IMPLEMENTED 0
#define PAL_APPLICATION_REGISTER_READABLE 1
#define PAL_CONTROL_REGISTER_IMPLEMENTED 2
#define PAL_CONTROL_REGISTER_READABLE 3
/**
PAL Procedure - PAL_REGISTER_INFO.
Return AR and CR register information. It is required by IPF.
The PAL procedure supports the Static Registers calling
convention. It could be called at physical mode and virtual
mode.
@param Index Index of PAL_REGISTER_INFO within the list of
PAL procedures.
@param InfoRequest Unsigned 64-bit integer denoting what
register information is requested. See
PAL_REGISTER_INFO.InfoRequest above.
@return R9 64-bit vector denoting information for registers
0-63. Bit 0 is register 0, bit 63 is register 63.
@return R10 64-bit vector denoting information for registers
64-127. Bit 0 is register 64, bit 63 is register
127.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_REGISTER_INFO 39
/**
PAL Procedure - PAL_RSE_INFO.
Return RSE information. It is required by IPF. The PAL
procedure supports the Static Registers calling convention. It
could be called at physical mode and virtual mode.
@param Index Index of PAL_RSE_INFO within the list of
PAL procedures.
@param InfoRequest Unsigned 64-bit integer denoting what
register information is requested. See
PAL_REGISTER_INFO.InfoRequest above.
@return R9 Number of physical stacked general registers.
@return R10 RSE hints supported by processor.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_RSE_INFO 19
/**
@param VersionOfPalB Is a 16-bit binary coded decimal (BCD)
number that provides identification
information about the PAL_B firmware.
@param PalVendor Is an unsigned 8-bit integer indicating the
vendor of the PAL code.
@param VersionOfPalB Is a 16-bit binary coded decimal (BCD)
number that provides identification
information about the PAL_A firmware. In
the split PAL_A model, this return value
is the version number of the
processor-specific PAL_A. The generic
PAL_A version is not returned by this
procedure in the split PAL_A model.
**/
typedef struct {
UINT64 VersionOfPalB:16;
UINT64 Reserved1:8;
UINT64 PalVendor:8;
UINT64 VersionOfPalA:16;
UINT64 Reserved2:16;
} PAL_VERSION_INFO;
/**
PAL Procedure - PAL_VERSION.
Return version of PAL code. It is required by IPF. The PAL
procedure supports the Static Registers calling convention. It
could be called at physical mode and virtual mode.
@param Index Index of PAL_VERSION within the list of
PAL procedures.
@param InfoRequest Unsigned 64-bit integer denoting what
register information is requested. See
PAL_REGISTER_INFO.InfoRequest above.
@return R9 8-byte formatted value returning the minimum PAL
version needed for proper operation of the
processor. See PAL_VERSION_INFO above.
@return R10 8-byte formatted value returning the current PAL
version running on the processor. See
PAL_VERSION_INFO above.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_VERSION 20
//
// Vectors of PAL_MC_CLEAR_LOG.pending
//
#define PAL_MC_PENDING BIT0
#define PAL_INIT_PENDING BIT1
/**
PAL Procedure - PAL_MC_CLEAR_LOG.
Clear all error information from processor error logging
registers. It is required by IPF. The PAL procedure supports
the Static Registers calling convention. It could be called at
physical mode and virtual mode.
@param Index Index of PAL_MC_CLEAR_LOG within the list of
PAL procedures.
@return R9 64-bit vector denoting whether an event is
pending. See PAL_MC_CLEAR_LOG.pending above.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_MC_CLEAR_LOG 21
/**
PAL Procedure - PAL_MC_DRAIN.
Ensure that all operations that could cause an MCA have
completed. It is required by IPF. The PAL procedure supports
the Static Registers calling convention. It could be called at
physical mode and virtual mode.
@param Index Index of PAL_MC_DRAIN within the list of PAL
procedures.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_MC_DRAIN 22
/**
PAL Procedure - PAL_MC_DYNAMIC_STATE.
Return Processor Dynamic State for logging by SAL. It is
optional. The PAL procedure supports the Static Registers
calling convention. It could be called at physical mode.
@param Index Index of PAL_MC_DYNAMIC_STATE within the list of PAL
procedures.
@param Offset Offset of the next 8 bytes of Dynamic Processor
State to return. (multiple of 8).
@return R9 Unsigned 64-bit integer denoting bytes of Dynamic
Processor State returned.
@return R10 Next 8 bytes of Dynamic Processor State.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure.
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_MC_DYNAMIC_STATE 24
//
// Values of PAL_MC_ERROR_INFO.InfoIndex.
//
#define PAL_PROCESSOR_ERROR_MAP 0
#define PAL_PROCESSOR_STATE_PARAM 1
#define PAL_STRUCTURE_SPECIFIC_ERROR 2
/**
@param CoreId Bit3:0, Processor core ID (default is 0 for
processors with a single core)
@param ThreadId Bit7:4, Logical thread ID (default is 0 for
processors that execute a single thread)
@param InfoOfInsCache Bit11:8, Error information is
available for 1st, 2nd, 3rd, and 4th
level instruction caches.
@param InfoOfDataCache Bit15:12, Error information is
available for 1st, 2nd, 3rd, and 4th
level data/unified caches.
@param InfoOfInsTlb Bit19:16 Error information is available
for 1st, 2nd, 3rd, and 4th level
instruction TLB.
@param InfoOfDataTlb Bit23:20, Error information is available
for 1st, 2nd, 3rd, and 4th level
data/unified TLB
@param InfoOfProcessorBus Bit27:24 Error information is
available for the 1st, 2nd, 3rd,
and 4th level processor bus
hierarchy.
@param InfoOfRegisterFile Bit31:28 Error information is
available on register file
structures.
@param InfoOfMicroArch Bit47:32, Error information is
available on micro-architectural
structures.
**/
typedef struct {
UINT64 CoreId:4;
UINT64 ThreadId:4;
UINT64 InfoOfInsCache:4;
UINT64 InfoOfDataCache:4;
UINT64 InfoOfInsTlb:4;
UINT64 InfoOfDataTlb:4;
UINT64 InfoOfProcessorBus:4;
UINT64 InfoOfRegisterFile:4;
UINT64 InfoOfMicroArch:4;
UINT64 Reserved:16;
} PAL_MC_ERROR_INFO_LEVEL_INDEX;
//
// Value of PAL_MC_ERROR_INFO.ErrorTypeIndex
//
#define PAL_ERR_INFO_BY_LEVEL_INDEX 0
#define PAL_ERR_INFO_TARGET_ADDRESS 1
#define PAL_ERR_INFO_REQUESTER_IDENTIFIER 2
#define PAL_ERR_INFO_REPONSER_INDENTIFIER 3
#define PAL_ERR_INFO_PRECISE_INSTRUCTION_POINTER 4
/**
@param Operation Bit3:0, Type of cache operation that caused
the machine check: 0 - unknown or internal
error 1 - load 2 - store 3 - instruction
fetch or instruction prefetch 4 - data
prefetch (both hardware and software) 5 -
snoop (coherency check) 6 - cast out
(explicit or implicit write-back of a cache
line) 7 - move in (cache line fill)
@param FailedCacheLevel Bit5:4 Level of cache where the
error occurred. A value of 0
indicates the first level of cache.
@param FailedInDataPart Bit8, Failure located in the data
part of the cache line.
@param FailedInTagPart Bit9, Failure located in the tag part
of the cache line.
@param FailedInDataCache Bit10, Failure located in the data
cache
@param FailedInInsCache Bit11, Failure located in the
instruction cache.
@param Mesi Bit14:12, 0 - cache line is invalid. 1 - cache
line is held shared. 2 - cache line is held
exclusive. 3 - cache line is modified. All other
values are reserved.
@param MesiIsValid Bit15, The mesi field in the cache_check
parameter is valid.
@param FailedWay Bit20:16, Failure located in the way of
the cache indicated by this value.
@param WayIndexIsValid Bit21, The way and index field in the
cache_check parameter is valid.
@param MultipleBitsError Bit23, A multiple-bit error was
detected, and data was poisoned for
the corresponding cache line during
castout.
@param IndexOfCacheLineError Bit51:32, Index of the cache
line where the error occurred.
@param InstructionSet Bit54, Instruction set. If this value
is set to zero, the instruction that
generated the machine check was an
Intel Itanium instruction. If this bit
is set to one, the instruction that
generated the machine check was IA-32
instruction.
@param InstructionSetIsValid Bit55, The is field in the
cache_check parameter is valid.
@param PrivilegeLevel Bit57:56, Privilege level. The
privilege level of the instruction
bundle responsible for generating the
machine check.
@param PrivilegeLevelIsValide Bit58, The pl field of the
cache_check parameter is
valid.
@param McCorrected Bit59, Machine check corrected: This bit
is set to one to indicate that the machine
check has been corrected.
@param TargetAddressIsValid Bit60, Target address is valid:
This bit is set to one to
indicate that a valid target
address has been logged.
@param RequesterIdentifier Bit61, Requester identifier: This
bit is set to one to indicate that
a valid requester identifier has
been logged.
@param ResponserIdentifier Bit62, Responder identifier: This
bit is set to one to indicate that
a valid responder identifier has
been logged.
@param PreciseInsPointer Bit63, Precise instruction pointer.
This bit is set to one to indicate
that a valid precise instruction
pointer has been logged.
**/
typedef struct {
UINT64 Operation:4;
UINT64 FailedCacheLevel:2;
UINT64 Reserved1:2;
UINT64 FailedInDataPart:1;
UINT64 FailedInTagPart:1;
UINT64 FailedInDataCache:1;
UINT64 FailedInInsCache:1;
UINT64 Mesi:3;
UINT64 MesiIsValid:1;
UINT64 FailedWay:5;
UINT64 WayIndexIsValid:1;
UINT64 Reserved2:1;
UINT64 MultipleBitsError:1;
UINT64 Reserved3:8;
UINT64 IndexOfCacheLineError:20;
UINT64 Reserved4:2;
UINT64 InstructionSet:1;
UINT64 InstructionSetIsValid:1;
UINT64 PrivilegeLevel:2;
UINT64 PrivilegeLevelIsValide:1;
UINT64 McCorrected:1;
UINT64 TargetAddressIsValid:1;
UINT64 RequesterIdentifier:1;
UINT64 ResponserIdentifier:1;
UINT64 PreciseInsPointer:1;
} PAL_CACHE_CHECK_INFO;
/**
@param FailedSlot Bit7:0, Slot number of the translation
register where the failure occurred.
@param FailedSlotIsValid Bit8, The tr_slot field in the
TLB_check parameter is valid.
@param TlbLevel Bit11:10, The level of the TLB where the
error occurred. A value of 0 indicates the
first level of TLB
@param FailedInDataTr Bit16, Error occurred in the data
translation registers.
@param FailedInInsTr Bit17, Error occurred in the instruction
translation registers
@param FailedInDataTc Bit18, Error occurred in data
translation cache.
@param FailedInInsTc Bit19, Error occurred in the instruction
translation cache.
@param FailedOperation Bit23:20, Type of cache operation that
caused the machine check: 0 - unknown
1 - TLB access due to load instruction
2 - TLB access due to store
instruction 3 - TLB access due to
instruction fetch or instruction
prefetch 4 - TLB access due to data
prefetch (both hardware and software)
5 - TLB shoot down access 6 - TLB
probe instruction (probe, tpa) 7 -
move in (VHPT fill) 8 - purge (insert
operation that purges entries or a TLB
purge instruction) All other values
are reserved.
@param InstructionSet Bit54, Instruction set. If this value
is set to zero, the instruction that
generated the machine check was an
Intel Itanium instruction. If this bit
is set to one, the instruction that
generated the machine check was IA-32
instruction.
@param InstructionSetIsValid Bit55, The is field in the
TLB_check parameter is valid.
@param PrivelegeLevel Bit57:56, Privilege level. The
privilege level of the instruction
bundle responsible for generating the
machine check.
@param PrivelegeLevelIsValid Bit58, The pl field of the
TLB_check parameter is valid.
@param McCorrected Bit59, Machine check corrected: This bit
is set to one to indicate that the machine
check has been corrected.
@param TargetAddressIsValid Bit60, Target address is valid:
This bit is set to one to
indicate that a valid target
address has been logged.
@param RequesterIdentifier Bit61 Requester identifier: This
bit is set to one to indicate that
a valid requester identifier has
been logged.
@param ResponserIdentifier Bit62, Responder identifier: This
bit is set to one to indicate that
a valid responder identifier has
been logged.
@param PreciseInsPointer Bit63 Precise instruction pointer.
This bit is set to one to indicate
that a valid precise instruction
pointer has been logged.
**/
typedef struct {
UINT64 FailedSlot:8;
UINT64 FailedSlotIsValid:1;
UINT64 Reserved1 :1;
UINT64 TlbLevel:2;
UINT64 Reserved2 :4;
UINT64 FailedInDataTr:1;
UINT64 FailedInInsTr:1;
UINT64 FailedInDataTc:1;
UINT64 FailedInInsTc:1;
UINT64 FailedOperation:4;
UINT64 Reserved3:30;
UINT64 InstructionSet:1;
UINT64 InstructionSetIsValid:1;
UINT64 PrivelegeLevel:2;
UINT64 PrivelegeLevelIsValid:1;
UINT64 McCorrected:1;
UINT64 TargetAddressIsValid:1;
UINT64 RequesterIdentifier:1;
UINT64 ResponserIdentifier:1;
UINT64 PreciseInsPointer:1;
} PAL_TLB_CHECK_INFO;
/**
PAL Procedure - PAL_MC_ERROR_INFO.
Return Processor Machine Check Information and Processor
Static State for logging by SAL. It is required by IPF. The
PAL procedure supports the Static Registers calling
convention. It could be called at physical and virtual mode.
@param Index Index of PAL_MC_ERROR_INFO within the list of PAL
procedures.
@param InfoIndex Unsigned 64-bit integer identifying the
error information that is being requested.
See PAL_MC_ERROR_INFO.InfoIndex.
@param LevelIndex 8-byte formatted value identifying the
structure to return error information
on. See PAL_MC_ERROR_INFO_LEVEL_INDEX.
@param ErrorTypeIndex Unsigned 64-bit integer denoting the
type of error information that is
being requested for the structure
identified in LevelIndex.
@return R9 Error information returned. The format of this
value is dependant on the input values passed.
@return R10 If this value is zero, all the error information
specified by err_type_index has been returned. If
this value is one, more structure-specific error
information is available and the caller needs to
make this procedure call again with level_index
unchanged and err_type_index, incremented.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -6 - Argument was valid, but no error
information was available
**/
#define PAL_MC_ERROR_INFO 25
/**
PAL Procedure - PAL_MC_EXPECTED.
Set/Reset Expected Machine Check Indicator. It is required by
IPF. The PAL procedure supports the Static Registers calling
convention. It could be called at physical mode.
@param Index Index of PAL_MC_EXPECTED within the list of PAL
procedures.
@param Expected Unsigned integer with a value of 0 or 1 to
set or reset the hardware resource
PALE_CHECK examines for expected machine
checks.
@return R9 Unsigned integer denoting whether a machine check
was previously expected.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_MC_EXPECTED 23
/**
PAL Procedure - PAL_MC_REGISTER_MEM.
Register min-state save area with PAL for machine checks and
inits. It is required by IPF. The PAL procedure supports the
Static Registers calling convention. It could be called at
physical mode.
@param Index Index of PAL_MC_REGISTER_MEM within the list of PAL
procedures.
@param Address Physical address of the buffer to be
registered with PAL.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_MC_REGISTER_MEM 27
/**
PAL Procedure - PAL_MC_RESUME.
Restore minimal architected state and return to interrupted
process. It is required by IPF. The PAL procedure supports the
Static Registers calling convention. It could be called at
physical mode.
@param Index Index of PAL_MC_RESUME within the list of PAL
procedures.
@param SetCmci Unsigned 64 bit integer denoting whether to
set the CMC interrupt. A value of 0 indicates
not to set the interrupt, a value of 1
indicated to set the interrupt, and all other
values are reserved.
@param SavePtr Physical address of min-state save area used
to used to restore processor state.
@param NewContext Unsigned 64-bit integer denoting whether
the caller is returning to a new context.
A value of 0 indicates the caller is
returning to the interrupted context, a
value of 1 indicates that the caller is
returning to a new context.
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_MC_RESUME 26
/**
PAL Procedure - PAL_HALT.
Enter the low-power HALT state or an implementation-dependent
low-power state. It is optinal. The PAL procedure supports the
Static Registers calling convention. It could be called at
physical mode.
@param Index Index of PAL_HALT within the list of PAL
procedures.
@param HaltState Unsigned 64-bit integer denoting low power
state requested.
@param IoDetailPtr 8-byte aligned physical address pointer to
information on the type of I/O
(load/store) requested.
@return R9 Value returned if a load instruction is requested
in the io_detail_ptr
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_HALT 28
/**
PAL Procedure - PAL_HALT_INFO.
Return the low power capabilities of the processor. It is
required by IPF. The PAL procedure supports the
Stacked Registers calling convention. It could be called at
physical and virtual mode.
@param Index Index of PAL_HALT_INFO within the list of PAL
procedures.
@param PowerBuffer 64-bit pointer to a 64-byte buffer aligned
on an 8-byte boundary.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_HALT_INFO 257
/**
PAL Procedure - PAL_HALT_LIGHT.
Enter the low power LIGHT HALT state. It is required by
IPF. The PAL procedure supports the Static Registers calling
convention. It could be called at physical and virtual mode.
@param Index Index of PAL_HALT_LIGHT within the list of PAL
procedures.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_HALT_LIGHT 29
/**
PAL Procedure - PAL_CACHE_LINE_INIT.
Initialize tags and data of a cache line for processor
testing. It is required by IPF. The PAL procedure supports the
Static Registers calling convention. It could be called at
physical and virtual mode.
@param Index Index of PAL_CACHE_LINE_INIT within the list of PAL
procedures.
@param Address Unsigned 64-bit integer value denoting the
physical address from which the physical page
number is to be generated. The address must be
an implemented physical address, bit 63 must
be zero.
@param DataValue 64-bit data value which is used to
initialize the cache line.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_CACHE_LINE_INIT 31
/**
PAL Procedure - PAL_CACHE_READ.
Read tag and data of a cache line for diagnostic testing. It
is optional. The PAL procedure supports the
Satcked Registers calling convention. It could be called at
physical mode.
@param Index Index of PAL_CACHE_READ within the list of PAL
procedures.
@param LineId 8-byte formatted value describing where in the
cache to read the data.
@param Address 64-bit 8-byte aligned physical address from
which to read the data. The address must be an
implemented physical address on the processor
model with bit 63 set to zero.
@return R9 Right-justified value returned from the cache
line.
@return R10 The number of bits returned in data.
@return R11 The status of the cache line.
@return Status 1 - The word at address was found in the
cache, but the line was invalid.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -5 - The word at address was not found in the
cache.
@return Status -7 - The operation requested is not supported
for this cache_type and level.
**/
#define PAL_CACHE_READ 259
/**
Write tag and data of a cache for diagnostic testing. It is
optional. The PAL procedure supports the Satcked Registers
calling convention. It could be called at physical mode.
@param Index Index of PAL_CACHE_WRITE within the list of PAL
procedures.
@param LineId 8-byte formatted value describing where in the
cache to write the data.
@param Address 64-bit 8-byte aligned physical address at
which the data should be written. The address
must be an implemented physical address on the
processor model with bit 63 set to 0.
@param Data Unsigned 64-bit integer value to write into
the specified part of the cache.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -7 - The operation requested is not supported
for this cache_type and level.
**/
#define PAL_CACHE_WRITE 260
/**
PAL Procedure - PAL_TEST_INFO.
Returns alignment and size requirements needed for the memory
buffer passed to the PAL_TEST_PROC procedure as well as
information on self-test control words for the processor self
tests. It is required by IPF. The PAL procedure supports the
Static Registers calling convention. It could be called at
physical mode.
@param Index Index of PAL_TEST_INFO within the list of PAL
procedures.
@param TestPhase Unsigned integer that specifies which phase
of the processor self-test information is
being requested on. A value of 0 indicates
the phase two of the processor self-test and
a value of 1 indicates phase one of the
processor self-test. All other values are
reserved.
@return R9 Unsigned 64-bit integer denoting the number of
bytes of main memory needed to perform the second
phase of processor self-test.
@return R10 Unsigned 64-bit integer denoting the alignment
required for the memory buffer.
@return R11 48-bit wide bit-field indicating if control of
the processor self-tests is supported and which
bits of the test_control field are defined for
use.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_TEST_INFO 37
/**
@param BufferSize Indicates the size in bytes of the memory
buffer that is passed to this procedure.
BufferSize must be greater than or equal in
size to the bytes_needed return value from
PAL_TEST_INFO, otherwise this procedure will
return with an invalid argument return
value.
@param TestPhase Defines which phase of the processor
self-tests are requested to be run. A value
of zero indicates to run phase two of the
processor self-tests. Phase two of the
processor self-tests are ones that require
external memory to execute correctly. A
value of one indicates to run phase one of
the processor self-tests. Phase one of the
processor self-tests are tests run during
PALE_RESET and do not depend on external
memory to run correctly. When the caller
requests to have phase one of the processor
self-test run via this procedure call, a
memory buffer may be needed to save and
restore state as required by the PAL calling
conventions. The procedure PAL_TEST_INFO
informs the caller about the requirements of
the memory buffer.
**/
typedef struct {
UINT64 BufferSize:56;
UINT64 TestPhase:8;
} PAL_TEST_INFO_INFO;
/**
@param TestControl This is an ordered implementation-specific
control word that allows the user control
over the length and runtime of the
processor self-tests. This control word is
ordered from the longest running tests up
to the shortest running tests with bit 0
controlling the longest running test. PAL
may not implement all 47-bits of the
test_control word. PAL communicates if a
bit provides control by placing a zero in
that bit. If a bit provides no control,
PAL will place a one in it. PAL will have
two sets of test_control bits for the two
phases of the processor self-test. PAL
provides information about implemented
test_control bits at the hand-off from PAL
to SAL for the firmware recovery check.
These test_control bits provide control
for phase one of processor self-test. It
also provides this information via the PAL
procedure call PAL_TEST_INFO for both the
phase one and phase two processor tests
depending on which information the caller
is requesting. PAL interprets these bits
as input parameters on two occasions. The
first time is when SAL passes control back
to PAL after the firmware recovery check.
The second time is when a call to
PAL_TEST_PROC is made. When PAL interprets
these bits it will only interpret
implemented test_control bits and will
ignore the values located in the
unimplemented test_control bits. PAL
interprets the implemented bits such that
if a bit contains a zero, this indicates
to run the test. If a bit contains a one,
this indicates to PAL to skip the test. If
the cs bit indicates that control is not
available, the test_control bits will be
ignored or generate an illegal argument in
procedure calls if the caller sets these
bits.
@param ControlSupport This bit defines if an implementation
supports control of the PAL self-tests
via the self-test control word. If
this bit is 0, the implementation does
not support control of the processor
self-tests via the self-test control
word. If this bit is 1, the
implementation does support control of
the processor self-tests via the
self-test control word. If control is
not supported, GR37 will be ignored at
the hand-off between SAL and PAL after
the firmware recovery check and the
PAL procedures related to the
processor self-tests may return
illegal arguments if a user tries to
use the self-test control features.
**/
typedef struct {
UINT64 TestControl:47;
UINT64 ControlSupport:1;
UINT64 Reserved:16;
} PAL_SELF_TEST_CONTROL;
/**
@param Attributes Specifies the memory attributes that are
allowed to be used with the memory buffer
passed to this procedure. The attributes
parameter is a vector where each bit
represents one of the virtual memory
attributes defined by the architecture.See
MEMORY_AATRIBUTES. The caller is required
to support the cacheable attribute for the
memory buffer, otherwise an invalid
argument will be returned.
@param TestControl Is the self-test control word
corresponding to the test_phase passed.
This test_control directs the coverage and
runtime of the processor self-tests
specified by the test_phase input
argument. Information on if this
feature is implemented and the number of
bits supported can be obtained by the
PAL_TEST_INFO procedure call. If this
feature is implemented by the processor,
the caller can selectively skip parts of
the processor self-test by setting
test_control bits to a one. If a bit has a
zero, this test will be run. The values in
the unimplemented bits are ignored. If
PAL_TEST_INFO indicated that the self-test
control word is not implemented, this
procedure will return with an invalid
argument status if the caller sets any of
the test_control bits. See
PAL_SELF_TEST_CONTROL.
**/
typedef struct {
UINT64 Attributes:8;
UINT64 Reserved:8;
UINT64 TestControl:48;
} PAL_TEST_CONTROL;
/**
PAL Procedure - PAL_TEST_PROC.
Perform late processor self test. It is required by IPF. The
PAL procedure supports the Static Registers calling
convention. It could be called at physical mode.
@param Index Index of PAL_TEST_PROC within the list of PAL
procedures.
@param TestAddress 64-bit physical address of main memory
area to be used by processor self-test.
The memory region passed must be
cacheable, bit 63 must be zero.
@param TestInfo Input argument specifying the size of the
memory buffer passed and the phase of the
processor self-test that should be run. See
PAL_TEST_INFO.
@param TestParam Input argument specifying the self-test
control word and the allowable memory
attributes that can be used with the memory
buffer. See PAL_TEST_CONTROL.
@return R9 Formatted 8-byte value denoting the state of the
processor after self-test
@return Status 1 - Call completed without error, but hardware
failures occurred during self-test.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_TEST_PROC 258
/**
@param NumberOfInterruptControllers Number of interrupt
controllers currently
enabled on the system.
@param NumberOfProcessors Number of processors currently
enabled on the system.
**/
typedef struct {
UINT32 NumberOfInterruptControllers;
UINT32 NumberOfProcessors;
} PAL_PLATFORM_INFO;
/**
PAL Procedure - PAL_COPY_INFO.
Return information needed to relocate PAL procedures and PAL
PMI code to memory. It is required by IPF. The PAL procedure
supports the Static Registers calling convention. It could be
called at physical mode.
@param Index Index of PAL_COPY_INFO within the list of PAL
procedures.
@param CopyType Unsigned integer denoting type of procedures
for which copy information is requested.
@param PlatformInfo 8-byte formatted value describing the
number of processors and the number of
interrupt controllers currently enabled
on the system. See PAL_PLATFORM_INFO.
@param McaProcStateInfo Unsigned integer denoting the number
of bytes that SAL needs for the
min-state save area for each
processor.
@return R9 Unsigned integer denoting the number of bytes of
PAL information that must be copied to main
memory.
@return R10 Unsigned integer denoting the starting alignment
of the data to be copied.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_CODE_TOKEN 0x0
#define PAL_IA32EMU_CODE_TOKEN 0x1
#define PAL_COPY_INFO 30
/**
PAL Procedure - PAL_COPY_PAL.
Relocate PAL procedures and PAL PMI code to memory. It is
required by IPF. The PAL procedure supports the Stacked
Registers calling convention. It could be called at physical
mode.
@param Index Index of PAL_COPY_PAL within the list of PAL
procedures.
@param TargetAddress Physical address of a memory buffer to
copy relocatable PAL procedures and PAL
PMI code.
@param AllocSize Unsigned integer denoting the size of the
buffer passed by SAL for the copy operation.
@param CopyOption Unsigned integer indicating whether
relocatable PAL code and PAL PMI code
should be copied from firmware address
space to main memory.
@return R9 Unsigned integer denoting the offset of PAL_PROC
in the relocatable segment copied.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_COPY_PAL 256
/**
PAL Procedure - PAL_ENTER_IA_32_ENV.
Enter IA-32 System environment. It is optional. The PAL
procedure supports the Static Registers calling convention.
It could be called at physical mode.
Note: Since this is a special call, it does not follow the PAL
static register calling convention. GR28 contains the index of
PAL_ENTER_IA_32_ENV within the list of PAL procedures. All other
input arguments including GR29-GR31 are setup by SAL to values
as required by the IA-32 operating system defined in Table
11-67. The registers that are designated as preserved, scratch,
input arguments and procedure return values by the static
procedure calling convention are not followed by this call. For
instance, GR5 and GR6 need not be preserved since these are
regarded as scratch by the IA-32 operating system. Note: In an
MP system, this call must be COMPLETED on the first CPU to enter
the IA-32 System Environment (may or may not be the BSP) prior
to being called on the remaining processors in the MP system.
@param Index GR28 contains the index of the
PAL_ENTER_IA_32_ENV call within the list of PAL
procedures.
@return Status The status is returned in GR4.
-1 - Un-implemented procedure 0 JMPE detected
at privilege level
0 - 1 SAL allocated buffer for IA-32 System
Environment operation is too small
2 - IA-32 Firmware Checksum Error
3 - SAL allocated buffer for IA-32 System
Environment operation is not properly aligned
4 - Error in SAL MP Info Table
5 - Error in SAL Memory Descriptor Table
6 - Error in SAL System Table
7 - Inconsistent IA-32 state
8 - IA-32 Firmware Internal Error
9 - IA-32 Soft Reset (Note: remaining register
state is undefined for this termination
reason)
10 - Machine Check Error
11 - Error in SAL I/O Intercept Table
12 - Processor exit due to other processor in
MP system terminating the IA32 system
environment. (Note: remaining register state
is undefined for this termination reason.)
13 - Itanium architecture-based state
corruption by either SAL PMI handler or I/O
Intercept callback function.
**/
#define PAL_ENTER_IA_32_ENV 33
/**
PAL Procedure - PAL_PMI_ENTRYPOINT.
Register PMI memory entrypoints with processor. It is required
by IPF. The PAL procedure supports the Stacked Registers
calling convention. It could be called at physical mode.
@param Index Index of PAL_PMI_ENTRYPOINT within the list of
PAL procedures.
@param SalPmiEntry 256-byte aligned physical address of SAL
PMI entrypoint in memory.
@return Status 0 - Call completed without error
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_PMI_ENTRYPOINT 32
/**
The ASCII brand identification string will be copied to the
address specified in the address input argument. The processor
brand identification string is defined to be a maximum of 128
characters long; 127 bytes will contain characters and the 128th
byte is defined to be NULL (0). A processor may return less than
the 127 ASCII characters as long as the string is null
terminated. The string length will be placed in the brand_info
return argument.
**/
#define PAL_BRAND_INFO_ID_REQUEST 0
/**
PAL Procedure - PAL_BRAND_INFO.
Provides processor branding information. It is optional by
IPF. The PAL procedure supports the Stacked Registers calling
convention. It could be called at physical and Virtual mode.
@param Index Index of PAL_BRAND_INFO within the list of PAL
procedures.
@param InfoRequest Unsigned 64-bit integer specifying the
information that is being requested. (See
PAL_BRAND_INFO_ID_REQUEST)
@param Address Unsigned 64-bit integer specifying the
address of the 128-byte block to which the
processor brand string shall be written.
@reture R9 Brand information returned. The format of this
value is dependent on the input values passed.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -6 - Input argument is not implemented.
**/
#define PAL_BRAND_INFO 274
/**
PAL Procedure - PAL_GET_HW_POLICY.
Returns the current hardware resource sharing policy of the
processor. It is optional by IPF. The PAL procedure supports
the Static Registers calling convention. It could be called at
physical and Virtual mode.
@param Index Index of PAL_GET_HW_POLICY within the list of PAL
procedures.
@param ProcessorNumber Unsigned 64-bit integer that specifies
for which logical processor
information is being requested. This
input argument must be zero for the
first call to this procedure and can
be a maximum value of one less than
the number of logical processors
impacted by the hardware resource
sharing policy, which is returned by
the R10 return value.
@reture R9 Unsigned 64-bit integer representing the current
hardware resource sharing policy.
@return R10 Unsigned 64-bit integer that returns the number
of logical processors impacted by the policy
input argument.
@return R11 Unsigned 64-bit integer containing the logical
address of one of the logical processors
impacted by policy modification.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_GET_HW_POLICY 48
//
// Value of PAL_SET_HW_POLICY.Policy
//
#define PAL_SET_HW_POLICY_PERFORMANCE 0
#define PAL_SET_HW_POLICY_FAIRNESS 1
#define PAL_SET_HW_POLICY_HIGH_PRIORITY 2
#define PAL_SET_HW_POLICY_EXCLUSIVE_HIGH_PRIORITY 3
/**
PAL Procedure - PAL_SET_HW_POLICY.
Sets the current hardware resource sharing policy of the
processor. It is optional by IPF. The PAL procedure supports
the Static Registers calling convention. It could be called at
physical and Virtual mode.
@param Index Index of PAL_SET_HW_POLICY within the list of PAL
procedures.
@param Policy Unsigned 64-bit integer specifying the hardware
resource sharing policy the caller is setting.
See Value of PAL_SET_HW_POLICY.Policy above.
@return Status 1 - Call completed successfully but could not
change the hardware policy since a
competing logical processor is set in
exclusive high priority.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_SET_HW_POLICY 49
/**
@param Mode Bit2:0, Indicates the mode of operation for this
procedure: 0 - Query mode 1 <EFBFBD>C Error inject mode
(err_inj should also be specified) 2 - Cancel
outstanding trigger. All other fields in
PAL_MC_ERROR_TYPE_INFO,
PAL_MC_ERROR_STRUCTURE_INFO and
PAL_MC_ERROR_DATA_BUFFER are ignored. All other
values are reserved.
@param ErrorInjection Bit5:3, indicates the mode of error
injection: 0 - Error inject only (no
error consumption) 1 - Error inject
and consume All other values are
reserved.
@param ErrorSeverity Bit7:6, indicates the severity desired
for error injection/query. Definitions
of the different error severity types
0 - Corrected error 1 - Recoverable
error 2 - Fatal error 3 - Reserved
@param ErrorStructure Bit12:8, Indicates the structure
identification for error
injection/query: 0 - Any structure
(cannot be used during query mode).
When selected, the structure type used
for error injection is determined by
PAL. 1 - Cache 2 - TLB 3 - Register
file 4 - Bus/System interconnect 5-15
- Reserved 16-31 - Processor
specific error injection
capabilities.ErrorDataBuffer is used
to specify error types. Please refer
to the processor specific
documentation for additional details.
@param StructureHierarchy Bit15:13, Indicates the structure
hierarchy for error
injection/query: 0 - Any level of
hierarchy (cannot be used during
query mode). When selected, the
structure hierarchy used for error
injection is determined by PAL. 1
- Error structure hierarchy
level-1 2 - Error structure
hierarchy level-2 3 - Error
structure hierarchy level-3 4 -
Error structure hierarchy level-4
All other values are reserved.
Reserved 63:16 Reserved
**/
typedef struct {
UINT64 Mode:3;
UINT64 ErrorInjection:3;
UINT64 ErrorSeverity:2;
UINT64 ErrorStructure:5;
UINT64 StructureHierarchy:3;
UINT64 Reserved:48;
} PAL_MC_ERROR_TYPE_INFO;
/**
@param StructInfoIsValid Bit0 When 1, indicates that the
structure information fields
(c_t,cl_p,cl_id) are valid and
should be used for error injection.
When 0, the structure information
fields are ignored, and the values
of these fields used for error
injection are
implementation-specific.
@param CacheType Bit2:1 Indicates which cache should be used
for error injection: 0 - Reserved 1 -
Instruction cache 2 - Data or unified cache
3 - Reserved
@param PortionOfCacheLine Bit5:3 Indicates the portion of the
cache line where the error should
be injected: 0 - Reserved 1 - Tag
2 - Data 3 - mesi All other
values are reserved.
@param Mechanism Bit8:6 Indicates which mechanism is used to
identify the cache line to be used for error
injection: 0 - Reserved 1 - Virtual address
provided in the inj_addr field of the buffer
pointed to by err_data_buffer should be used
to identify the cache line for error
injection. 2 - Physical address provided in
the inj_addr field of the buffer pointed to
by err_data_buffershould be used to identify
the cache line for error injection. 3 - way
and index fields provided in err_data_buffer
should be used to identify the cache line
for error injection. All other values are
reserved.
@param DataPoisonOfCacheLine Bit9 When 1, indicates that a
multiple bit, non-correctable
error should be injected in the
cache line specified by cl_id.
If this injected error is not
consumed, it may eventually
cause a data-poisoning event
resulting in a corrected error
signal, when the associated
cache line is cast out (implicit
or explicit write-back of the
cache line). The error severity
specified by err_sev in
err_type_info must be set to 0
(corrected error) when this bit
is set.
@param TrigerInfoIsValid Bit32 When 1, indicates that the
trigger information fields (trigger,
trigger_pl) are valid and should be
used for error injection. When 0,
the trigger information fields are
ignored and error injection is
performed immediately.
@param Triger Bit36:33 Indicates the operation type to be
used as the error trigger condition. The
address corresponding to the trigger is
specified in the trigger_addr field of the
buffer pointed to by err_data_buffer: 0 -
Instruction memory access. The trigger match
conditions for this operation type are similar
to the IBR address breakpoint match conditions
1 - Data memory access. The trigger match
conditions for this operation type are similar
to the DBR address breakpoint match conditions
All other values are reserved.
@param PrivilegeOfTriger Bit39:37 Indicates the privilege
level of the context during which
the error should be injected: 0 -
privilege level 0 1 - privilege
level 1 2 - privilege level 2 3 -
privilege level 3 All other values
are reserved. If the implementation
does not support privilege level
qualifier for triggers (i.e. if
trigger_pl is 0 in the capabilities
vector), this field is ignored and
triggers can be taken at any
privilege level.
**/
typedef struct {
UINT64 StructInfoIsValid:1;
UINT64 CacheType:2;
UINT64 PortionOfCacheLine:3;
UINT64 Mechanism:3;
UINT64 DataPoisonOfCacheLine:1;
UINT64 Reserved1:22;
UINT64 TrigerInfoIsValid:1;
UINT64 Triger:4;
UINT64 PrivilegeOfTriger:3;
UINT64 Reserved2:24;
} PAL_MC_ERROR_STRUCT_INFO;
/**
Buffer Pointed to by err_data_buffer <EFBFBD>C TLB
**/
typedef struct {
UINT64 TrigerAddress;
UINT64 VirtualPageNumber:52;
UINT64 Reserved1:8;
UINT64 RegionId:24;
UINT64 Reserved2:40;
} PAL_MC_ERROR_DATA_BUFFER_TLB;
/**
PAL Procedure - PAL_MC_ERROR_INJECT.
Injects the requested processor error or returns information
on the supported injection capabilities for this particular
processor implementation. It is optional by IPF. The PAL
procedure supports the Stacked Registers calling convention.
It could be called at physical and Virtual mode.
@param Index Index of PAL_MC_ERROR_INJECT within the list of PAL
procedures.
@param ErrorTypeInfo Unsigned 64-bit integer specifying the
first level error information which
identifies the error structure and
corresponding structure hierarchy, and
the error severity.
@param ErrorStructInfo Unsigned 64-bit integer identifying
the optional structure specific
information that provides the second
level details for the requested error.
@param ErrorDataBuffer 64-bit physical address of a buffer
providing additional parameters for
the requested error. The address of
this buffer must be 8-byte aligned.
@return R9 64-bit vector specifying the supported error
injection capabilities for the input argument
combination of struct_hier, err_struct and
err_sev fields in ErrorTypeInfo.
@return R10 64-bit vector specifying the architectural
resources that are used by the procedure.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -4 - Call completed with error; the requested
error could not be injected due to failure in
locating the target location in the specified
structure.
@return Status -5 - Argument was valid, but requested error
injection capability is not supported.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_MC_ERROR_INJECT 276
//
// Types of PAL_GET_PSTATE.Type
//
#define PAL_GET_PSTATE_RECENT 0
#define PAL_GET_PSTATE_AVERAGE_NEW_START 1
#define PAL_GET_PSTATE_AVERAGE 2
#define PAL_GET_PSTATE_NOW 3
/**
PAL Procedure - PAL_GET_PSTATE.
Returns the performance index of the processor. It is optional
by IPF. The PAL procedure supports the Stacked Registers
calling convention. It could be called at physical and Virtual
mode.
@param Index Index of PAL_GET_PSTATE within the list of PAL
procedures.
@param Type Type of performance_index value to be returned
by this procedure.See PAL_GET_PSTATE.Type above.
@return R9 Unsigned integer denoting the processor
performance for the time duration since the last
PAL_GET_PSTATE procedure call was made. The
value returned is between 0 and 100, and is
relative to the performance index of the highest
available P-state.
@return Status 1 - Call completed without error, but accuracy
of performance index has been impacted by a
thermal throttling event, or a
hardware-initiated event.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_GET_PSTATE 262
/**
Layout of PAL_PSTATE_INFO.PStateBuffer
**/
typedef struct {
UINT32 PerformanceIndex:7;
UINT32 Reserved1:5;
UINT32 TypicalPowerDissipation:20;
UINT32 TransitionLatency1;
UINT32 TransitionLatency2;
UINT32 Reserved2;
} PAL_PSTATE_INFO_BUFFER;
/**
PAL Procedure - PAL_PSTATE_INFO.
Returns information about the P-states supported by the
processor. It is optional by IPF. The PAL procedure supports
the Static Registers calling convention. It could be called
at physical and Virtual mode.
@param Index Index of PAL_PSTATE_INFO within the list of PAL
procedures.
@param PStateBuffer 64-bit pointer to a 256-byte buffer
aligned on an 8-byte boundary. See
PAL_PSTATE_INFO_BUFFER above.
@return R9 Unsigned integer denoting the number of P-states
supported. The maximum value of this field is 16.
@return R10 Dependency domain information
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
**/
#define PAL_PSTATE_INFO 44
/**
PAL Procedure - PAL_SET_PSTATE.
To request a processor transition to a given P-state. It is
optional by IPF. The PAL procedure supports the Stacked
Registers calling convention. It could be called at physical
and Virtual mode.
@param Index Index of PAL_SET_PSTATE within the list of PAL
procedures.
@param PState Unsigned integer denoting the processor
P-state being requested.
@param ForcePState Unsigned integer denoting whether the
P-state change should be forced for the
logical processor.
@return Status 1 - Call completed without error, but
transition request was not accepted
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_SET_PSTATE 263
/**
PAL Procedure - PAL_SHUTDOWN.
Put the logical processor into a low power state which can be
exited only by a reset event. It is optional by IPF. The PAL
procedure supports the Static Registers calling convention. It
could be called at physical mode.
@param Index Index of PAL_SHUTDOWN within the list of PAL
procedures.
@param NotifyPlatform 8-byte aligned physical address
pointer providing details on how to
optionally notify the platform that
the processor is entering a shutdown
state.
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_SHUTDOWN 45
/**
Layout of PAL_MEMORY_BUFFER.ControlWord
**/
typedef struct {
UINT64 Registration:1;
UINT64 ProbeInterrupt:1;
UINT64 Reserved:62;
} PAL_MEMORY_CONTROL_WORD;
/**
PAL Procedure - PAL_MEMORY_BUFFER.
Provides cacheable memory to PAL for exclusive use during
runtime. It is optional by IPF. The PAL procedure supports the
Static Registers calling convention. It could be called at
physical mode.
@param Index Index of PAL_MEMORY_BUFFER within the list of PAL
procedures.
@param BaseAddress Physical address of the memory buffer
allocated for PAL use.
@param AllocSize Unsigned integer denoting the size of the
memory buffer.
@param ControlWord Formatted bit vector that provides control
options for this procedure. See
PAL_MEMORY_CONTROL_WORD above.
@return R9 Returns the minimum size of the memory buffer
required if the alloc_size input argument was
not large enough.
@return Status 1 - Call has not completed a buffer relocation
due to a pending interrupt
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_MEMORY_BUFFER 277
/**
PAL Procedure - PAL_VP_CREATE.
Initializes a new vpd for the operation of a new virtual
processor in the virtual environment. It is optional by IPF.
The PAL procedure supports the Stacked Registers calling
convention. It could be called at Virtual mode.
@param Index Index of PAL_VP_CREATE within the list of PAL
procedures.
@param Vpd 64-bit host virtual pointer to the Virtual
Processor Descriptor (VPD).
@param HostIva 64-bit host virtual pointer to the host IVT
for the virtual processor
@param OptionalHandler 64-bit non-zero host-virtual pointer
to an optional handler for
virtualization intercepts.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_VP_CREATE 265
/**
Virtual Environment Information Parameter
**/
typedef struct {
UINT64 Reserved1:8;
UINT64 Opcode:1;
UINT64 Reserved:53;
} PAL_VP_ENV_INFO_RETURN;
/**
PAL Procedure - PAL_VP_ENV_INFO.
Returns the parameters needed to enter a virtual environment.
It is optional by IPF. The PAL procedure supports the Stacked
Registers calling convention. It could be called at Virtual
mode.
@param Index Index of PAL_VP_ENV_INFO within the list of PAL
procedures.
@param Vpd 64-bit host virtual pointer to the Virtual
Processor Descriptor (VPD).
@param HostIva 64-bit host virtual pointer to the host IVT
for the virtual processor
@param OptionalHandler 64-bit non-zero host-virtual pointer
to an optional handler for
virtualization intercepts.
@return R9 Unsigned integer denoting the number of bytes
required by the PAL virtual environment buffer
during PAL_VP_INIT_ENV
@return R10 64-bit vector of virtual environment
information. See PAL_VP_ENV_INFO_RETURN.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_VP_ENV_INFO 266
/**
PAL Procedure - PAL_VP_EXIT_ENV.
Allows a logical processor to exit a virtual environment.
It is optional by IPF. The PAL procedure supports the Stacked
Registers calling convention. It could be called at Virtual
mode.
@param Index Index of PAL_VP_EXIT_ENV within the list of PAL
procedures.
@param Iva Optional 64-bit host virtual pointer to the IVT
when this procedure is done
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_VP_EXIT_ENV 267
/**
PAL Procedure - PAL_VP_INIT_ENV.
Allows a logical processor to enter a virtual environment. It
is optional by IPF. The PAL procedure supports the Stacked
Registers calling convention. It could be called at Virtual
mode.
@param Index Index of PAL_VP_INIT_ENV within the list of PAL
procedures.
@param ConfigOptions 64-bit vector of global configuration
settings.
@param PhysicalBase Host physical base address of a block of
contiguous physical memory for the PAL
virtual environment buffer 1) This
memory area must be allocated by the VMM
and be 4K aligned. The first logical
processor to enter the environment will
initialize the physical block for
virtualization operations.
@param VirtualBase Host virtual base address of the
corresponding physical memory block for
the PAL virtual environment buffer : The
VMM must maintain the host virtual to host
physical data and instruction translations
in TRs for addresses within the allocated
address space. Logical processors in this
virtual environment will use this address
when transitioning to virtual mode
operations.
@return R9 Virtualization Service Address <EFBFBD>C VSA specifies
the virtual base address of the PAL
virtualization services in this virtual
environment.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_VP_INIT_ENV 268
/**
PAL Procedure - PAL_VP_REGISTER.
Register a different host IVT and/or a different optional
virtualization intercept handler for the virtual processor
specified by vpd. It is optional by IPF. The PAL procedure
supports the Stacked Registers calling convention. It could be
called at Virtual mode.
@param Index Index of PAL_VP_REGISTER within the list of PAL
procedures.
@param Vpd 64-bit host virtual pointer to the Virtual
Processor Descriptor (VPD) host_iva 64-bit host
virtual pointer to the host IVT for the virtual
processor
@param OptionalHandler 64-bit non-zero host-virtual pointer
to an optional handler for
virtualization intercepts.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_VP_REGISTER 269
/**
PAL Procedure - PAL_VP_RESTORE.
Restores virtual processor state for the specified vpd on the
logical processor. It is optional by IPF. The PAL procedure
supports the Stacked Registers calling convention. It could be
called at Virtual mode.
@param Index Index of PAL_VP_RESTORE within the list of PAL
procedures.
@param Vpd 64-bit host virtual pointer to the Virtual
Processor Descriptor (VPD) host_iva 64-bit host
virtual pointer to the host IVT for the virtual
processor
@param PalVector Vector specifies PAL procedure
implementation-specific state to be
restored.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_VP_RESTORE 270
/**
PAL Procedure - PAL_VP_SAVE.
Saves virtual processor state for the specified vpd on the
logical processor. It is optional by IPF. The PAL procedure
supports the Stacked Registers calling convention. It could be
called at Virtual mode.
@param Index Index of PAL_VP_SAVE within the list of PAL
procedures.
@param Vpd 64-bit host virtual pointer to the Virtual
Processor Descriptor (VPD) host_iva 64-bit host
virtual pointer to the host IVT for the virtual
processor
@param PalVector Vector specifies PAL procedure
implementation-specific state to be
restored.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_VP_SAVE 271
/**
PAL Procedure - PAL_VP_TERMINATE.
Terminates operation for the specified virtual processor. It
is optional by IPF. The PAL procedure supports the Stacked
Registers calling convention. It could be called at Virtual
mode.
@param Index Index of PAL_VP_TERMINATE within the list of PAL
procedures.
@param Vpd 64-bit host virtual pointer to the Virtual
Processor Descriptor (VPD)
@param Iva Optional 64-bit host virtual pointer to the IVT
when this procedure is done.
@return Status 0 - Call completed without error
@return Status -1 - Unimplemented procedure
@return Status -2 - Invalid argument
@return Status -3 - Call completed with error.
@return Status -9 - Call requires PAL memory buffer.
**/
#define PAL_VP_TERMINATE 272
/**
Makes a PAL procedure call.
This is a wrapper function to make a PAL procedure call. Based on the Index value,
this API will make static or stacked PAL call. Architected procedures may be designated
as required or optional. If a PAL procedure is specified as optional, a unique return
code of 0xFFFFFFFFFFFFFFFF is returned in the Status field of the PAL_CALL_RETURN structure.
This indicates that the procedure is not present in this PAL implementation. It is the
caller<EFBFBD><EFBFBD>s responsibility to check for this return code after calling any optional PAL
procedure. No parameter checking is performed on the 4 input parameters, but there are
some common rules that the caller should follow when making a PAL call. Any address
passed to PAL as buffers for return parameters must be 8-byte aligned. Unaligned addresses
may cause undefined results. For those parameters defined as reserved or some fields
defined as reserved must be zero filled or the invalid argument return value may be
returned or undefined result may occur during the execution of the procedure.
This function is only available on IPF.
@param Index - The PAL procedure Index number.
@param Arg2 - The 2nd parameter for PAL procedure calls.
@param Arg3 - The 3rd parameter for PAL procedure calls.
@param Arg4 - The 4th parameter for PAL procedure calls.
@return structure returned from the PAL Call procedure, including the status and return value.
**/
PAL_CALL_RETURN
EFIAPI
PalCall (
IN UINT64 Index,
IN UINT64 Arg2,
IN UINT64 Arg3,
IN UINT64 Arg4
);
#endif