audk/DuetPkg/8254TimerDxe/Timer.h

/*++

Copyright (c) 2005 - 2006, Intel Corporation                                                         
All rights reserved. This program and the accompanying materials                          
are licensed and made available under the terms and conditions of the BSD License         
which accompanies this distribution.  The full text of the license may be found at        
http://opensource.org/licenses/bsd-license.php                                            
                                                                                          
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             


Module Name:

 Timer.h

Abstract:

  Private data structures

--*/

#ifndef _TIMER_H_
#define _TIMER_H_

#include <PiDxe.h>

#include <Protocol/Cpu.h>
#include <Protocol/CpuIo.h>
#include <Protocol/Legacy8259.h>
#include <Protocol/Timer.h>

#include <Library/UefiBootServicesTableLib.h>
#include <Library/BaseLib.h>
#include <Library/DebugLib.h>

//
// The PCAT 8253/8254 has an input clock at 1.193182 MHz and Timer 0 is
// initialized as a 16 bit free running counter that generates an interrupt(IRQ0)
// each time the counter rolls over.
//
//   65536 counts
// ---------------- * 1,000,000 uS/S = 54925.4 uS = 549254 * 100 ns
//   1,193,182 Hz
//
#define DEFAULT_TIMER_TICK_DURATION 549254
#define TIMER_CONTROL_PORT          0x43
#define TIMER0_COUNT_PORT           0x40

//
// Function Prototypes
//
EFI_STATUS
EFIAPI
TimerDriverInitialize (
  IN EFI_HANDLE        ImageHandle,
  IN EFI_SYSTEM_TABLE  *SystemTable
  )
/*++

Routine Description:

  Initialize the Timer Architectural Protocol driver

Arguments:

  ImageHandle - ImageHandle of the loaded driver

  SystemTable - Pointer to the System Table

Returns:

  EFI_SUCCESS           - Timer Architectural Protocol created

  EFI_OUT_OF_RESOURCES  - Not enough resources available to initialize driver.
  
  EFI_DEVICE_ERROR      - A device error occured attempting to initialize the driver.

--*/
;

EFI_STATUS
EFIAPI
TimerDriverRegisterHandler (
  IN EFI_TIMER_ARCH_PROTOCOL  *This,
  IN EFI_TIMER_NOTIFY         NotifyFunction
  )
/*++

Routine Description:

  This function registers the handler NotifyFunction so it is called every time 
  the timer interrupt fires.  It also passes the amount of time since the last 
  handler call to the NotifyFunction.  If NotifyFunction is NULL, then the 
  handler is unregistered.  If the handler is registered, then EFI_SUCCESS is 
  returned.  If the CPU does not support registering a timer interrupt handler, 
  then EFI_UNSUPPORTED is returned.  If an attempt is made to register a handler 
  when a handler is already registered, then EFI_ALREADY_STARTED is returned.  
  If an attempt is made to unregister a handler when a handler is not registered, 
  then EFI_INVALID_PARAMETER is returned.  If an error occurs attempting to 
  register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR 
  is returned.

Arguments:

  This           - The EFI_TIMER_ARCH_PROTOCOL instance.

  NotifyFunction - The function to call when a timer interrupt fires.  This 
                   function executes at TPL_HIGH_LEVEL.  The DXE Core will 
                   register a handler for the timer interrupt, so it can know 
                   how much time has passed.  This information is used to 
                   signal timer based events.  NULL will unregister the handler.

Returns: 

  EFI_SUCCESS           - The timer handler was registered.

  EFI_UNSUPPORTED       - The platform does not support timer interrupts.

  EFI_ALREADY_STARTED   - NotifyFunction is not NULL, and a handler is already 
                          registered.

  EFI_INVALID_PARAMETER - NotifyFunction is NULL, and a handler was not 
                          previously registered.

  EFI_DEVICE_ERROR      - The timer handler could not be registered.

--*/
;

EFI_STATUS
EFIAPI
TimerDriverSetTimerPeriod (
  IN EFI_TIMER_ARCH_PROTOCOL  *This,
  IN UINT64                   TimerPeriod
  )
/*++

Routine Description:

  This function adjusts the period of timer interrupts to the value specified 
  by TimerPeriod.  If the timer period is updated, then the selected timer 
  period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned.  If 
  the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.  
  If an error occurs while attempting to update the timer period, then the 
  timer hardware will be put back in its state prior to this call, and 
  EFI_DEVICE_ERROR is returned.  If TimerPeriod is 0, then the timer interrupt 
  is disabled.  This is not the same as disabling the CPU's interrupts.  
  Instead, it must either turn off the timer hardware, or it must adjust the 
  interrupt controller so that a CPU interrupt is not generated when the timer 
  interrupt fires. 

Arguments:

  This        - The EFI_TIMER_ARCH_PROTOCOL instance.

  TimerPeriod - The rate to program the timer interrupt in 100 nS units.  If 
                the timer hardware is not programmable, then EFI_UNSUPPORTED is 
                returned.  If the timer is programmable, then the timer period 
                will be rounded up to the nearest timer period that is supported 
                by the timer hardware.  If TimerPeriod is set to 0, then the 
                timer interrupts will be disabled.

Returns: 

  EFI_SUCCESS      - The timer period was changed.

  EFI_UNSUPPORTED  - The platform cannot change the period of the timer interrupt.

  EFI_DEVICE_ERROR - The timer period could not be changed due to a device error.

--*/
;

EFI_STATUS
EFIAPI
TimerDriverGetTimerPeriod (
  IN EFI_TIMER_ARCH_PROTOCOL   *This,
  OUT UINT64                   *TimerPeriod
  )
/*++

Routine Description:

  This function retrieves the period of timer interrupts in 100 ns units, 
  returns that value in TimerPeriod, and returns EFI_SUCCESS.  If TimerPeriod 
  is NULL, then EFI_INVALID_PARAMETER is returned.  If a TimerPeriod of 0 is 
  returned, then the timer is currently disabled.

Arguments:

  This        - The EFI_TIMER_ARCH_PROTOCOL instance.

  TimerPeriod - A pointer to the timer period to retrieve in 100 ns units.  If 
                0 is returned, then the timer is currently disabled.

Returns: 

  EFI_SUCCESS           - The timer period was returned in TimerPeriod.

  EFI_INVALID_PARAMETER - TimerPeriod is NULL.

--*/
;

EFI_STATUS
EFIAPI
TimerDriverGenerateSoftInterrupt (
  IN EFI_TIMER_ARCH_PROTOCOL  *This
  )
/*++

Routine Description:

  This function generates a soft timer interrupt. If the platform does not support soft 
  timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned. 
  If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler() 
  service, then a soft timer interrupt will be generated. If the timer interrupt is 
  enabled when this service is called, then the registered handler will be invoked. The 
  registered handler should not be able to distinguish a hardware-generated timer 
  interrupt from a software-generated timer interrupt.

Arguments:

  This  -  The EFI_TIMER_ARCH_PROTOCOL instance.

Returns: 

  EFI_SUCCESS       - The soft timer interrupt was generated.

  EFI_UNSUPPORTEDT  - The platform does not support the generation of soft timer interrupts.

--*/
;

#endif