audk/MdeModulePkg/Universal/DebugSupportDxe/X64/AsmFuncs.S

552 lines
20 KiB
ArmAsm
Raw Normal View History

#/**@file
# Low leve x64 specific debug support functions.
#
# Copyright (c) 2006 - 2008, Intel Corporation
# All rights reserved. This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#**/
.intel_syntax noprefix
.globl ASM_PFX(OrigVector)
.globl ASM_PFX(InterruptEntryStub)
.globl ASM_PFX(StubSize)
.globl ASM_PFX(CommonIdtEntry)
.globl ASM_PFX(FxStorSupport)
.data
ASM_PFX(StubSize): .long ASM_PFX(InterruptEntryStubEnd) - ASM_PFX(InterruptEntryStub)
ASM_PFX(AppRsp): .long 0x11111111 # ?
.long 0x11111111 # ?
ASM_PFX(DebugRsp): .long 0x22222222 # ?
.long 0x22222222 # ?
ASM_PFX(ExtraPush): .long 0x33333333 # ?
.long 0x33333333 # ?
ASM_PFX(ExceptData): .long 0x44444444 # ?
.long 0x44444444 # ?
ASM_PFX(Rflags): .long 0x55555555 # ?
.long 0x55555555 # ?
ASM_PFX(OrigVector): .long 0x66666666 # ?
.long 0x66666666 # ?
## The declarations below define the memory region that will be used for the debug stack.
## The context record will be built by pushing register values onto this stack.
## It is imparitive that alignment be carefully managed, since the FXSTOR and
## FXRSTOR instructions will GP fault if their memory operand is not 16 byte aligned.
##
## The stub will switch stacks from the application stack to the debuger stack
## and pushes the exception number.
##
## Then we building the context record on the stack. Since the stack grows down,
## we push the fields of the context record from the back to the front. There
## are 336 bytes of stack used prior allocating the 512 bytes of stack to be
## used as the memory buffer for the fxstor instruction. Therefore address of
## the buffer used for the FXSTOR instruction is &Eax - 336 - 512, which
## must be 16 byte aligned.
##
## We carefully locate the stack to make this happen.
##
## For reference, the context structure looks like this:
## struct {
## UINT64 ExceptionData;
## FX_SAVE_STATE_X64 FxSaveState; // 512 bytes, must be 16 byte aligned
## UINT64 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7;
## UINT64 Cr0, Cr1, Cr2, Cr3, Cr4, Cr8;
## UINT64 RFlags;
## UINT64 Ldtr, Tr;
## UINT64 Gdtr[2], Idtr[2];
## UINT64 Rip;
## UINT64 Gs, Fs, Es, Ds, Cs, Ss;
## UINT64 Rdi, Rsi, Rbp, Rsp, Rbx, Rdx, Rcx, Rax;
## UINT64 R8, R9, R10, R11, R12, R13, R14, R15;
## } SYSTEM_CONTEXT_X64; // 64 bit system context record
.align 16
DebugStackEnd : .ascii "DbgStkEnd >>>>>>" # 16 byte long string - must be 16 bytes to preserve alignment
.rept 0x1ffc
.long 0x00000000
.endr
# 32K should be enough stack
# This allocation is coocked to insure
# that the the buffer for the FXSTORE instruction
# will be 16 byte aligned also.
#
ASM_PFX(ExceptionNumber): .long 0x77777777 # first entry will be the vector number pushed by the stub
.long 0x77777777 # ?
DebugStackBegin : .ascii "<<<< DbgStkBegin" # initial debug ESP == DebugStackBegin, set in stub
.text
#------------------------------------------------------------------------------
# BOOLEAN
# FxStorSupport (
# void
# )
#
# Abstract: Returns TRUE if FxStor instructions are supported
#
.globl ASM_PFX(FxStorSupport)
ASM_PFX(FxStorSupport):
#
# cpuid corrupts rbx which must be preserved per the C calling convention
#
push rbx
mov rax, 1
cpuid
mov eax, edx
and rax, 0x01000000
shr rax, 24
pop rbx
ret
#------------------------------------------------------------------------------
# void
# Vect2Desc (
# IA32_IDT_GATE_DESCRIPTOR * DestDesc, // rcx
# void (*Vector) (void) // rdx
# )
#
# Abstract: Encodes an IDT descriptor with the given physical address
#
.globl ASM_PFX(Vect2Desc)
ASM_PFX(Vect2Desc):
mov rax, rdx
mov word ptr [rcx], ax # write bits 15..0 of offset
mov dx, cs
mov word ptr [rcx+2], dx # SYS_CODE_SEL from GDT
mov word ptr [rcx+4], 0x0e00 OR 0x8000 # type = 386 interrupt gate, present
shr rax, 16
mov word ptr [rcx+6], ax # write bits 31..16 of offset
shr rax, 16
mov dword ptr [rcx+8], eax # write bits 63..32 of offset
ret
#------------------------------------------------------------------------------
# InterruptEntryStub
#
# Abstract: This code is not a function, but is a small piece of code that is
# copied and fixed up once for each IDT entry that is hooked.
#
.globl ASM_PFX(InterruptEntryStub)
ASM_PFX(InterruptEntryStub):
push 0 # push vector number - will be modified before installed
jmp ASM_PFX(CommonIdtEntry)
.globl ASM_PFX(InterruptEntryStubEnd)
ASM_PFX(InterruptEntryStubEnd):
#------------------------------------------------------------------------------
# CommonIdtEntry
#
# Abstract: This code is not a function, but is the common part for all IDT
# vectors.
#
.globl ASM_PFX(CommonIdtEntry)
##
## At this point, the stub has saved the current application stack esp into AppRsp
## and switched stacks to the debug stack, where it pushed the vector number
##
## The application stack looks like this:
##
## ...
## (last application stack entry)
## [16 bytes alignment, do not care it]
## SS from interrupted task
## RSP from interrupted task
## rflags from interrupted task
## CS from interrupted task
## RIP from interrupted task
## Error code <-------------------- Only present for some exeption types
##
## Vector Number <----------------- pushed in our IDT Entry
##
## The stub switched us to the debug stack and pushed the interrupt number.
##
## Next, construct the context record. It will be build on the debug stack by
## pushing the registers in the correct order so as to create the context structure
## on the debug stack. The context record must be built from the end back to the
## beginning because the stack grows down...
#
## For reference, the context record looks like this:
##
## typedef
## struct {
## UINT64 ExceptionData;
## FX_SAVE_STATE_X64 FxSaveState;
## UINT64 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7;
## UINT64 Cr0, Cr2, Cr3, Cr4, Cr8;
## UINT64 RFlags;
## UINT64 Ldtr, Tr;
## UINT64 Gdtr[2], Idtr[2];
## UINT64 Rip;
## UINT64 Gs, Fs, Es, Ds, Cs, Ss;
## UINT64 Rdi, Rsi, Rbp, Rsp, Rbx, Rdx, Rcx, Rax;
## UINT64 R8, R9, R10, R11, R12, R13, R14, R15;
## } SYSTEM_CONTEXT_X64; // 64
ASM_PFX(CommonIdtEntry):
## NOTE: we save rsp here to prevent compiler put rip reference cause error AppRsp
push rax
mov rax, qword ptr [rsp][8] # save vector number
mov ASM_PFX(ExceptionNumber), rax # save vector number
pop rax
add rsp, 8 # pop vector number
mov ASM_PFX(AppRsp), rsp # save stack top
mov rsp, offset DebugStackBegin # switch to debugger stack
sub rsp, 8 # leave space for vector number
## UINT64 Rdi, Rsi, Rbp, Rsp, Rbx, Rdx, Rcx, Rax;
## UINT64 R8, R9, R10, R11, R12, R13, R14, R15;
push r15
push r14
push r13
push r12
push r11
push r10
push r9
push r8
push rax
push rcx
push rdx
push rbx
push rsp
push rbp
push rsi
push rdi
## Save interrupt state rflags register...
pushfq
pop rax
mov qword ptr ASM_PFX(Rflags), rax
## We need to determine if any extra data was pushed by the exception, and if so, save it
## To do this, we check the exception number pushed by the stub, and cache the
## result in a variable since we'll need this again.
cmp dword ptr ASM_PFX(ExceptionNumber), 0
jz ExtraPushOne
cmp dword ptr ASM_PFX(ExceptionNumber), 10
jz ExtraPushOne
cmp dword ptr ASM_PFX(ExceptionNumber), 11
jz ExtraPushOne
cmp dword ptr ASM_PFX(ExceptionNumber), 12
jz ExtraPushOne
cmp dword ptr ASM_PFX(ExceptionNumber), 13
jz ExtraPushOne
cmp dword ptr ASM_PFX(ExceptionNumber), 14
jz ExtraPushOne
cmp dword ptr ASM_PFX(ExceptionNumber), 17
jz ExtraPushOne
mov dword ptr ASM_PFX(ExtraPush), 0
mov dword ptr ASM_PFX(ExceptData), 0
jmp ExtraPushDone
ExtraPushOne:
mov dword ptr ASM_PFX(ExtraPush), 1
## If there's some extra data, save it also, and modify the saved AppRsp to effectively
## pop this value off the application's stack.
mov rax, ASM_PFX(AppRsp)
mov rbx, [rax]
mov ASM_PFX(ExceptData), rbx
add rax, 8
mov ASM_PFX(AppRsp), rax
ExtraPushDone:
## The "push" above pushed the debug stack rsp. Since what we're actually doing
## is building the context record on the debug stack, we need to save the pushed
## debug RSP, and replace it with the application's last stack entry...
mov rax, [rsp + 24]
mov ASM_PFX(DebugRsp), rax
mov rax, ASM_PFX(AppRsp)
add rax, 40
# application stack has ss, rsp, rflags, cs, & rip, so
# last actual application stack entry is 40 bytes
# into the application stack.
mov [rsp + 24], rax
## continue building context record
## UINT64 Gs, Fs, Es, Ds, Cs, Ss; insure high 16 bits of each is zero
mov rax, ss
push rax
# CS from application is one entry back in application stack
mov rax, ASM_PFX(AppRsp)
movzx rax, word ptr [rax + 8]
push rax
mov rax, ds
push rax
mov rax, es
push rax
mov rax, fs
push rax
mov rax, gs
push rax
## UINT64 Rip;
# Rip from application is on top of application stack
mov rax, ASM_PFX(AppRsp)
push qword ptr [rax]
## UINT64 Gdtr[2], Idtr[2];
push 0
push 0
sidt [rsp]
push 0
push 0
sgdt [rsp]
## UINT64 Ldtr, Tr;
xor rax, rax
str ax
push rax
sldt ax
push rax
## UINT64 RFlags;
## Rflags from application is two entries back in application stack
mov rax, ASM_PFX(AppRsp)
push qword ptr [rax + 16]
## UINT64 Cr0, Cr1, Cr2, Cr3, Cr4, Cr8;
## insure FXSAVE/FXRSTOR is enabled in CR4...
## ... while we're at it, make sure DE is also enabled...
mov rax, cr8
push rax
mov rax, cr4
or rax, 0x208
mov cr4, rax
push rax
mov rax, cr3
push rax
mov rax, cr2
push rax
push 0
mov rax, cr0
push rax
## UINT64 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7;
mov rax, dr7
push rax
## clear Dr7 while executing debugger itself
xor rax, rax
mov dr7, rax
mov rax, dr6
push rax
## insure all status bits in dr6 are clear...
xor rax, rax
mov dr6, rax
mov rax, dr3
push rax
mov rax, dr2
push rax
mov rax, dr1
push rax
mov rax, dr0
push rax
## FX_SAVE_STATE_X64 FxSaveState;
sub rsp, 512
mov rdi, rsp
# IMPORTANT!! The debug stack has been carefully constructed to
# insure that rsp and rdi are 16 byte aligned when we get here.
# They MUST be. If they are not, a GP fault will occur.
# FXSTOR_RDI
fxsave [rdi]
## UINT64 ExceptionData;
mov rax, ASM_PFX(ExceptData)
push rax
# call to C code which will in turn call registered handler
# pass in the vector number
mov rdx, rsp
mov rcx, ASM_PFX(ExceptionNumber)
sub rsp, 40
call ASM_PFX(InterruptDistrubutionHub)
add rsp, 40
# restore context...
## UINT64 ExceptionData;
add rsp, 8
## FX_SAVE_STATE_X64 FxSaveState;
mov rsi, rsp
# FXRSTOR_RSI
fxrstor [rsi]
add rsp, 512
## UINT64 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7;
pop rax
mov dr0, rax
pop rax
mov dr1, rax
pop rax
mov dr2, rax
pop rax
mov dr3, rax
## skip restore of dr6. We cleared dr6 during the context save.
add rsp, 8
pop rax
mov dr7, rax
## UINT64 Cr0, Cr1, Cr2, Cr3, Cr4, Cr8;
pop rax
mov cr0, rax
add rsp, 8
pop rax
mov cr2, rax
pop rax
mov cr3, rax
pop rax
mov cr4, rax
pop rax
mov cr8, rax
## UINT64 RFlags;
mov rax, ASM_PFX(AppRsp)
pop qword ptr [rax + 16]
## UINT64 Ldtr, Tr;
## UINT64 Gdtr[2], Idtr[2];
## Best not let anyone mess with these particular registers...
add rsp, 48
## UINT64 Rip;
pop qword ptr [rax]
## UINT64 Gs, Fs, Es, Ds, Cs, Ss;
## NOTE - modified segment registers could hang the debugger... We
## could attempt to insulate ourselves against this possibility,
## but that poses risks as well.
##
pop rax
# mov gs, rax
pop rax
# mov fs, rax
pop rax
mov es, rax
pop rax
mov ds, rax
mov rax, ASM_PFX(AppRsp)
pop qword ptr [rax + 8]
pop rax
mov ss, rax
## The next stuff to restore is the general purpose registers that were pushed
## using the "push" instruction.
##
## The value of RSP as stored in the context record is the application RSP
## including the 5 entries on the application stack caused by the exception
## itself. It may have been modified by the debug agent, so we need to
## determine if we need to relocate the application stack.
mov rbx, [rsp + 24] # move the potentially modified AppRsp into rbx
mov rax, ASM_PFX(AppRsp)
add rax, 40
cmp rbx, rax
je NoAppStackMove
mov rax, ASM_PFX(AppRsp)
mov rcx, [rax] # RIP
mov [rbx], rcx
mov rcx, [rax + 8] # CS
mov [rbx + 8], rcx
mov rcx, [rax + 16] # RFLAGS
mov [rbx + 16], rcx
mov rcx, [rax + 24] # RSP
mov [rbx + 24], rcx
mov rcx, [rax + 32] # SS
mov [rbx + 32], rcx
mov rax, rbx # modify the saved AppRsp to the new AppRsp
mov ASM_PFX(AppRsp), rax
NoAppStackMove:
mov rax, ASM_PFX(DebugRsp) # restore the DebugRsp on the debug stack
# so our "pop" will not cause a stack switch
mov [rsp + 24], rax
cmp dword ptr ASM_PFX(ExceptionNumber), 0x068
jne NoChain
Chain:
## Restore rflags so when we chain, the flags will be exactly as if we were never here.
## We gin up the stack to do an iretq so we can get ALL the flags.
mov rax, ASM_PFX(AppRsp)
mov rbx, [rax + 40]
push rbx
mov rax, ss
push rax
mov rax, rsp
add rax, 16
push rax
mov rax, ASM_PFX(AppRsp)
mov rbx, [rax + 16]
and rbx, NOT 0x300 # special handling for IF and TF
push rbx
mov rax, cs
push rax
mov rax, offset PhonyIretq
push rax
iretq
PhonyIretq:
## UINT64 Rdi, Rsi, Rbp, Rsp, Rbx, Rdx, Rcx, Rax;
## UINT64 R8, R9, R10, R11, R12, R13, R14, R15;
pop rdi
pop rsi
pop rbp
pop rsp
pop rbx
pop rdx
pop rcx
pop rax
pop r8
pop r9
pop r10
pop r11
pop r12
pop r13
pop r14
pop r15
## Switch back to application stack
mov rsp, ASM_PFX(AppRsp)
## Jump to original handler
jmp ASM_PFX(OrigVector)
NoChain:
## UINT64 Rdi, Rsi, Rbp, Rsp, Rbx, Rdx, Rcx, Rax;
## UINT64 R8, R9, R10, R11, R12, R13, R14, R15;
pop rdi
pop rsi
pop rbp
pop rsp
pop rbx
pop rdx
pop rcx
pop rax
pop r8
pop r9
pop r10
pop r11
pop r12
pop r13
pop r14
pop r15
## Switch back to application stack
mov rsp, ASM_PFX(AppRsp)
## We're outa here...
iret