audk/QuarkSocPkg/QuarkSouthCluster/Include/I2cRegs.h

102 lines
6.3 KiB
C
Raw Normal View History

/** @file
Include file for I2C DXE Driver register definitions (PCIe config. space and memory space).
Copyright (c) 2013-2015 Intel Corporation.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _I2C_REGS_H_
#define _I2C_REGS_H_
//----------------------------------------------------------------------------
/// I2C Device Address
//----------------------------------------------------------------------------
typedef struct {
///
/// The I2C hardware address to which the I2C device is preassigned or allocated.
///
UINTN I2CDeviceAddress : 10;
} EFI_I2C_DEVICE_ADDRESS;
//----------------------------------------------------------------------------
/// I2C Addressing Mode (7-bit or 10 bit)
//----------------------------------------------------------------------------
typedef enum _EFI_I2C_ADDR_MODE {
EfiI2CSevenBitAddrMode,
EfiI2CTenBitAddrMode,
} EFI_I2C_ADDR_MODE;
//----------------------------------------------------------------------------
// I2C Controller B:D:F
//----------------------------------------------------------------------------
#define I2C_Bus 0x00
#define I2C_Device 0x15
#define I2C_Func 0x02
//----------------------------------------------------------------------------
// Memory Mapped Registers
//----------------------------------------------------------------------------
#define I2C_REG_CON 0x00 // Control Register
#define B_I2C_REG_CON_SPEED (BIT2+BIT1) // standard mode (01) or fast mode (10)
#define B_I2C_REG_CON_10BITADD_MASTER (BIT4) // 7-bit addressing (0) or 10-bit addressing (1)
#define I2C_REG_TAR 0x04 // Master Target Address Register
#define B_I2C_REG_TAR (BIT9+BIT8+BIT7+BIT6+BIT5+BIT4+BIT3+BIT2+BIT1+BIT0) // Master Target Address bits
#define I2C_REG_DATA_CMD 0x10 // Data Buffer and Command Register
#define B_I2C_REG_DATA_CMD_RW (BIT8) // Data Buffer and Command Register Read/Write bit
#define B_I2C_REG_DATA_CMD_STOP (BIT9) // Data Buffer and Command Register STOP bit
#define B_I2C_REG_DATA_CMD_RESTART (BIT10) // Data Buffer and Command Register RESTART bit
#define I2C_REG_SS_SCL_HCNT 0x14 // Standard Speed Clock SCL High Count Register
#define I2C_REG_SS_SCL_LCNT 0x18 // Standard Speed Clock SCL Low Count Register
#define I2C_REG_FS_SCL_HCNT 0x1C // Fast Speed Clock SCL High Count Register
#define I2C_REG_FS_SCL_LCNT 0x20 // Fast Speed Clock SCL Low Count Register
#define I2C_REG_INTR_STAT 0x2C // Interrupt Status Register
#define B_I2C_REG_INTR_STAT_STOP_DET (BIT9) // Interrupt Status Register STOP_DET signal status
#define I2C_REG_INTR_MASK 0x30 // Interrupt Status Mask Register
#define I2C_REG_RAW_INTR_STAT 0x34 // Raw Interrupt Status Register
#define I2C_REG_RAW_INTR_STAT_STOP_DET (BIT9) // Raw Interrupt Status Register STOP_DET signal status.
#define I2C_REG_RAW_INTR_STAT_TX_ABRT (BIT6) // Raw Interrupt Status Register TX Abort status.
#define I2C_REG_RAW_INTR_STAT_TX_OVER (BIT3) // Raw Interrupt Status Register TX Overflow signal status.
#define I2C_REG_RAW_INTR_STAT_RX_OVER (BIT1) // Raw Interrupt Status Register RX Overflow signal status.
#define I2C_REG_RAW_INTR_STAT_RX_UNDER (BIT0) // Raw Interrupt Status Register RX Underflow signal status.
#define I2C_REG_RX_TL 0x38 // Receive FIFO Threshold Level Register
#define I2C_REG_TX_TL 0x3C // Transmit FIFO Threshold Level Register
#define I2C_REG_CLR_INT 0x40 // Clear Combined and Individual Interrupt Register
#define I2C_REG_CLR_RX_UNDER 0x44 // Clear RX Under Interrupt Register
#define I2C_REG_CLR_RX_OVER 0x48 // Clear RX Over Interrupt Register
#define I2C_REG_CLR_TX_OVER 0x4C // Clear TX Over Interrupt Register
#define I2C_REG_CLR_RD_REQ 0x50 // Clear RD REQ Interrupt Register
#define I2C_REG_CLR_TX_ABRT 0x54 // Clear TX ABRT Interrupt Register
#define I2C_REG_CLR_ACTIVITY 0x5C // Clear Activity Interrupt Register
#define I2C_REG_CLR_STOP_DET 0x60 // Clear STOP DET Interrupt Register
#define B_I2C_REG_CLR_STOP_DET (BIT0) // Clear STOP DET Interrupt Register
#define I2C_REG_CLR_START_DET 0x64 // Clear START DET Interrupt Register
#define B_I2C_REG_CLR_START_DET (BIT0) // Clear START DET Interrupt Register
#define I2C_REG_ENABLE 0x6C // Enable Register
#define B_I2C_REG_ENABLE (BIT0) // Enable (1) or disable (0) I2C Controller
#define I2C_REG_STATUS 0x70 // Status Register
#define I2C_REG_TXFLR 0x74 // Transmit FIFO Level Register
#define B_I2C_REG_TXFLR (BIT3+BIT2+BIT1+BIT0) // Transmit FIFO Level Register bits
#define I2C_REG_RXFLR 0x78 // Receive FIFO Level Register
#define B_I2C_REG_RXFLR (BIT3+BIT2+BIT1+BIT0) // Receive FIFO Level Register bits
#define I2C_REG_SDA_HOLD 0x7C // SDA HOLD Register
#define I2C_REG_TX_ABRT_SOURCE 0x80 // Transmit Abort Source Register
#define I2C_REG_ENABLE_STATUS 0x9C // Enable Status Register
#define I2C_REG_FS_SPKLEN 0xA0 // SS and FS Spike Suppression Limit Register
//
// Features.
//
#define I2C_FIFO_SIZE 16
#endif