audk/MdeModulePkg/MdeModulePkg.dec

1812 lines
103 KiB
Plaintext
Raw Normal View History

## @file MdeModulePkg.dec
# This package provides the modules that conform to UEFI/PI Industry standards.
# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
# and libraries instances, which are used for those modules.
#
# Copyright (c) 2007 - 2017, Intel Corporation. All rights reserved.<BR>
# Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
# (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
# Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>
#
# This program and the accompanying materials are licensed and made available under
# the terms and conditions of the BSD License that accompanies this distribution.
# The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php.
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
##
[Defines]
DEC_SPECIFICATION = 0x00010005
PACKAGE_NAME = MdeModulePkg
PACKAGE_UNI_FILE = MdeModulePkg.uni
PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288
PACKAGE_VERSION = 0.97
[Includes]
Include
[LibraryClasses]
## @libraryclass IpIo layer upon EFI IP4 Protocol.
# This library is only intended to be used by UEFI network stack modules.
IpIoLib|Include/Library/IpIoLib.h
## @libraryclass Basic function for UEFI network stack.
# This library is only intended to be used by UEFI network stack modules.
NetLib|Include/Library/NetLib.h
## @libraryclass The helper routines to access UDP service.
# This library is only intended to be used by UEFI network stack modules.
UdpIoLib|Include/Library/UdpIoLib.h
## @libraryclass The helper routines to access TCP service.
# This library is only intended to be used by UEFI network stack modules.
TcpIoLib|Include/Library/TcpIoLib.h
## @libraryclass The helper routines to access HTTP service.
# This library is only intended to be used by UEFI network stack modules.
HttpLib|Include/Library/HttpLib.h
## @libraryclass Defines a set of methods to reset whole system.
ResetSystemLib|Include/Library/ResetSystemLib.h
## @libraryclass Defines a set of methods related do S3 mode.
# This library class is no longer used and modules using this library should
# directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
S3Lib|Include/Library/S3Lib.h
## @libraryclass Defines a set of methods related recovery mode.
# This library class is no longer used and modules using this library should
# directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
RecoveryLib|Include/Library/RecoveryLib.h
## @libraryclass Provides HII related functions.
HiiLib|Include/Library/HiiLib.h
## @libraryclass Defines a set of interfaces on how to process capusle image update.
CapsuleLib|Include/Library/CapsuleLib.h
## @libraryclass Library for Deferred Procedure Calls.
DpcLib|Include/Library/DpcLib.h
## @libraryclass Provides global variables that are pointers
# to the UEFI HII related protocols.
#
UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.
#
SecurityManagementLib|Include/Library/SecurityManagementLib.h
## @libraryclass OEM status code libary is used to report status code to OEM device.
#
OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
## @libraryclass Debug Agent is used to provide soft debug capability.
#
DebugAgentLib|Include/Library/DebugAgentLib.h
## @libraryclass Provide platform specific hooks.
#
PlatformHookLib|Include/Library/PlatformHookLib.h
## @libraryclass Provide platform specific hooks for SMM core.
#
SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h
## @libraryclass Provide capability to maintain the data integrity cross S3 phase.
#
LockBoxLib|Include/Library/LockBoxLib.h
## @libraryclass Provide the CPU exception handler.
#
CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
## @libraryclass Provides platform specific display interface.
#
CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h
MdeModulePkg, MdePkg, NetworkPkg, OvmfPkg, PerformancePkg, ShellPkg: Library Migration. Move libraries from ShellPkg into MdeModulePkg and MdePkg. The following libraries are being migrated out of ShellPkg in order to make their functionality more widely available. • PathLib: Incorporate into MdePkg/Library/BaseLib • FileHandleLib: MdePkg/Library/UefiFileHandleLib • BaseSortLib: MdeModulePkg/Library/BaseSortLib • UefiSortLib: MdeModulePkg/Library/UefiSortLib Diffs showing file changes are in the attached file, LibMigration.patch. A description of the changes follows: • Move ShellPkg/Include/Library/FileHandleLib.h to MdePkg/Include/Library/FileHandleLib.h • Move ShellPkg/Include/Library/SortLib.h to MdeModulePkg/Include/Library/SortLib.h • Move ShellPkg/Library/BaseSortLib to MdeModulePkg/Library/BaseSortLib • Move ShellPkg/Library/UefiSortLib to MdeModulePkg/Library/UefiSortLib • Move ShellPkg/Library/BasePathLib/BasePathLib.c to MdePkg/Library/BaseLib/FilePaths.c • Merge ShellPkg/Include/Library/PathLib.h into MdePkg/Include/Library/BaseLib.h • Delete ShellPkg/Library/BasePathLib; Includes BasePathLib.c and BasePathLib.inf • NetworkPkg/NetworkPkg.dsc • PerformancePkg.dsc • OvmfPkg/OvmfPkgX64.dsc • OvmfPkg/OvmfPkgIa32X64.dsc • OvmfPkg/OvmfPkgIa32.dsc o Update SortLib and FileHandleLib library classes to point to the new library locations. o Remove PathLib library class and make sure that BaseLib is described. • MdeModulePkg/MdeModulePkg.dec o Add SortLib library class • MdePkg/MdePkg.dec o Add FileHandleLib library class o Add PcdUefiFileHandleLibPrintBufferSize PCD • MdePkg/Library/BaseLib/BaseLib.inf o Add FilePaths.c to [Sources] • MdePkg/Include/Library/BaseLib.h o Update file description to include "file path functions" • ShellPkg/ShellPkg.dsc o Change PACKAGE_GUID to { C1014BB7-4092-43D4-984F-0738EB424DBF } o Update PACKAGE_VERSION to 1.0 o Update SortLib and FileHandleLib library classes to point to the new library locations. o Remove PathLib library class and make sure that BaseLib is described. o Remove ShellPkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf from [Components] • ShellPkg/ShellPkg.dec o Update PLATFORM_VERSION to 1.0 o Remove declarations of the FileHandleLib, SortLib, and PathLib Library Classes o Update comment for the PcdShellPrintBufferSize PCD. • ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf • ShellPkg/Application/Shell/Shell.inf o Remove PathLib from [LibraryClasses] • ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.h • ShellPkg/Application/Shell/Shell.h o Remove #include <Library/PathLib.h> • ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf o Add PathLib to [LibraryClasses] • ShellPkg/Library/UefiShellLevel1CommandsLib/If.c o Remove #include <Library/PathLib.h> • ShellPkg/Application/ShellSortTestApp/ShellSortTestApp.inf o Add MdeModulePkg/MdeModulePkg.dec to [Packages] • MdeModulePkg/Library/BaseSortLib/BaseSortLib.inf • MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf o Replace ShellPkg.dec with MdeModulePkg.dec in [Packages] • MdeModulePkg/Library/UefiSortLib/UefiSortLib.c o Remove #include <ShellBase.h> o Define USL_FREE_NON_NULL() to replace SHELL_FREE_NON_NULL() Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Daryl McDaniel <daryl.mcdaniel@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16601 6f19259b-4bc3-4df7-8a09-765794883524
2015-01-13 02:04:07 +01:00
## @libraryclass Provides sorting functions
SortLib|Include/Library/SortLib.h
## @libraryclass Provides core boot manager functions
UefiBootManagerLib|Include/Library/UefiBootManagerLib.h
## @libraryclass Provides core boot manager functions
PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h
## @libraryclass Provides common interfaces about TPM measurement for other modules.
#
TpmMeasurementLib|Include/Library/TpmMeasurementLib.h
## @libraryclass Provides authenticated variable services.
#
AuthVariableLib|Include/Library/AuthVariableLib.h
## @libraryclass Provides variable check services and database management.
#
VarCheckLib|Include/Library/VarCheckLib.h
## @libraryclass Provides services to get variable error flag and do platform variable cleanup.
#
PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h
## @libraryclass Provides services to get do the file explorer.
#
FileExplorerLib|Include/Library/FileExplorerLib.h
## @libraryclass Provides interfaces about logo display.
#
BootLogoLib|Include/Library/BootLogoLib.h
## @libraryclass Provides interfaces about Ipmi submit generic commond.
#
IpmiLib|Include/Library/IpmiLib.h
## @libraryclass Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver.
#
PciHostBridgeLib|Include/Library/PciHostBridgeLib.h
## @libraryclass Provides services to record memory profile of multilevel caller.
#
MemoryProfileLib|Include/Library/MemoryProfileLib.h
## @libraryclass Provides an interface for performing UEFI Graphics Output Protocol Video blt operations.
##
FrameBufferBltLib|Include/Library/FrameBufferBltLib.h
## @libraryclass Provides services to authenticate a UEFI defined FMP Capsule.
#
FmpAuthenticationLib|Include/Library/FmpAuthenticationLib.h
## @libraryclass Provides a service to register non-discoverable device
##
NonDiscoverableDeviceRegistrationLib|Include/Library/NonDiscoverableDeviceRegistrationLib.h
[Guids]
## MdeModule package token space guid
# Include/Guid/MdeModulePkgTokenSpace.h
gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
## Hob guid for Pcd DataBase
# Include/Guid/PcdDataBaseHobGuid.h
gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
## Guid for PCD DataBase signature.
# Include/Guid/PcdDataBaseSignatureGuid.h
gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}
## Guid for EDKII implementation GUIDed opcodes
# Include/Guid/MdeModuleHii.h
gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
## Guid for Framework vfr GUIDed opcodes.
# Include/Guid/MdeModuleHii.h
gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
## Guid to specify the System Non Volatile FV
# Include/Guid/SystemNvDataGuid.h
gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
## GUID used as the signature of FTW working block header.
# Include/Guid/SystemNvDataGuid.h
gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
# Include/Guid/FaultTolerantWrite.h
gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
## Guid specify the device is the console out device.
# Include/Guid/ConsoleOutDevice.h
gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
## Guid specify the device is the console in device.
# Include/Guid/ConsoleInDevice.h
gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
## Hob and Variable guid specify the platform memory type information.
# Include/Guid/MemoryTypeInformation.h
gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
## Capsule update hob and variable guid
# Include/Guid/CapsuleVendor.h
gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
## Guid specifiy the device is the StdErr device.
# Include/Guid/StandardErrorDevice.h
gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
# Include/Guid/VariableFormat.h
gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.
# Include/Guid/AuthenticatedVariableFormat.h
gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }
# Include/Guid/VariableIndexTable.h
gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
# Include/Guid/SmmVariableCommon.h
gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
# Include/Guid/Performance.h
gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }
## Guid is defined for CRC32 encapsulation scheme.
# Include/Guid/Crc32GuidedSectionExtraction.h
gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
## Include/Guid/StatusCodeCallbackGuid.h
gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
## GUID identifies status code records HOB that originate from the PEI status code
# Include/Guid/MemoryStatusCodeRecord.h
gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
# Include/Guid/StatusCodeDataTypeDebug.h
gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
## A configuration Table Guid for Load module at fixed address
# Include/Guid/LoadModuleAtFixedAddress.h
gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
## GUID used to store the global debug mask value into an EFI Variable
# Include/Guid/DebugMask.h
gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
## Event for the DXE Core to signal idle events
# Include/Guid/EventIdle.h
gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
## Include/Guid/RecoveryDevice.h
gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
## Include/Guid/RecoveryDevice.h
gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
## Include/Guid/RecoveryDevice.h
gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
## Include/Guid/RecoveryDevice.h
gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
## Include/Guid/SmmLockBox.h
gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
## Include/Guid/AcpiS3Context.h
gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
## Include/Guid/AcpiS3Context.h
gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
## Include/Guid/BootScriptExecutorVariable.h
gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
## Include/Guid/UsbKeyBoardLayout.h
gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
## Include/Guid/HiiResourceSampleHii.h
gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
## Include/Guid/DriverSampleHii.h
gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
## Include/Guid/PlatDriOverrideHii.h
gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
## Include/Guid/Ip4Config2Hii.h
gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}
## Include/Guid/VlanConfigHii.h
gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
## Include/Guid/Ip4IScsiConfigHii.h
gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
## Include/Guid/ZeroGuid.h
gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
## Include/Guid/MtcVendor.h
gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
## Guid for Firmware Performance Data Table (FPDT) implementation.
# Include/Guid/FirmwarePerformance.h
gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
## Include/Guid/ExitBootServiceFailed.h
gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
## Include/Guid/ConnectConInEvent.h
gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
## Include/Guid/StatusCodeDataTypeVariable.h
gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}
## Include/Guid/MemoryProfile.h
gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}
gEdkiiSmmMemoryProfileGuid = { 0xe22bbcca, 0x516a, 0x46a8, { 0x80, 0xe2, 0x67, 0x45, 0xe8, 0x36, 0x93, 0xbd }}
## Include/Protocol/VarErrorFlag.h
gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }
## GUID indicates the BROTLI custom compress/decompress algorithm.
gBrotliCustomDecompressGuid = { 0x3D532050, 0x5CDA, 0x4FD0, { 0x87, 0x9E, 0x0F, 0x7F, 0x63, 0x0D, 0x5A, 0xFB }}
## GUID indicates the LZMA custom compress/decompress algorithm.
# Include/Guid/LzmaDecompress.h
gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}
gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}
## Include/Guid/TtyTerm.h
gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}
## Include/Guid/HiiBootMaintenanceFormset.h
gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}
gEfiIfrFrontPageGuid = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }
## Include/Guid/RamDiskHii.h
gRamDiskFormSetGuid = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}
## Include/Guid/PiSmmCommunicationRegionTable.h
gEdkiiPiSmmCommunicationRegionTableGuid = { 0x4e28ca50, 0xd582, 0x44ac, {0xa1, 0x1f, 0xe3, 0xd5, 0x65, 0x26, 0xdb, 0x34}}
## Include/Guid/PiSmmMemoryAttributesTable.h
gEdkiiPiSmmMemoryAttributesTableGuid = { 0x6b9fd3f7, 0x16df, 0x45e8, {0xbd, 0x39, 0xb9, 0x4a, 0x66, 0x54, 0x1a, 0x5d}}
## Include/Guid/SmiHandlerProfile.h
gSmiHandlerProfileGuid = {0x49174342, 0x7108, 0x409b, {0x8b, 0xbe, 0x65, 0xfd, 0xa8, 0x53, 0x89, 0xf5}}
## Include/Guid/NonDiscoverableDevice.h
gEdkiiNonDiscoverableAhciDeviceGuid = { 0xC7D35798, 0xE4D2, 0x4A93, {0xB1, 0x45, 0x54, 0x88, 0x9F, 0x02, 0x58, 0x4B } }
gEdkiiNonDiscoverableAmbaDeviceGuid = { 0x94440339, 0xCC93, 0x4506, {0xB4, 0xC6, 0xEE, 0x8D, 0x0F, 0x4C, 0xA1, 0x91 } }
gEdkiiNonDiscoverableEhciDeviceGuid = { 0xEAEE5615, 0x0CFD, 0x45FC, {0x87, 0x69, 0xA0, 0xD8, 0x56, 0x95, 0xAF, 0x85 } }
gEdkiiNonDiscoverableNvmeDeviceGuid = { 0xC5F25542, 0x2A79, 0x4A26, {0x81, 0xBB, 0x4E, 0xA6, 0x32, 0x33, 0xB3, 0x09 } }
gEdkiiNonDiscoverableOhciDeviceGuid = { 0xB20005B0, 0xBB2D, 0x496F, {0x86, 0x9C, 0x23, 0x0B, 0x44, 0x79, 0xE7, 0xD1 } }
gEdkiiNonDiscoverableSdhciDeviceGuid = { 0x1DD1D619, 0xF9B8, 0x463E, {0x86, 0x81, 0xD1, 0xDC, 0x7C, 0x07, 0xB7, 0x2C } }
gEdkiiNonDiscoverableUfsDeviceGuid = { 0x2EA77912, 0x80A8, 0x4947, {0xBE, 0x69, 0xCD, 0xD0, 0x0A, 0xFB, 0xE5, 0x56 } }
gEdkiiNonDiscoverableUhciDeviceGuid = { 0xA8CDA0A2, 0x4F37, 0x4A1B, {0x8E, 0x10, 0x8E, 0xF3, 0xCC, 0x3B, 0xF3, 0xA8 } }
gEdkiiNonDiscoverableXhciDeviceGuid = { 0xB1BE0BC5, 0x6C28, 0x442D, {0xAA, 0x37, 0x15, 0x1B, 0x42, 0x57, 0xBD, 0x78 } }
## Include/Guid/PlatformHasAcpi.h
gEdkiiPlatformHasAcpiGuid = { 0xf0966b41, 0xc23f, 0x41b9, { 0x96, 0x04, 0x0f, 0xf7, 0xe1, 0x11, 0x96, 0x5a } }
[Ppis]
## Include/Ppi/AtaController.h
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
## Include/Ppi/UsbHostController.h
gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
## Include/Ppi/Usb2HostController.h
gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}
## Include/Ppi/UsbController.h
gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
## Include/Ppi/UsbIo.h
gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
## Include/Ppi/SecPerformance.h
gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
## Include/Ppi/SmmCommunication.h
gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
## Include/Ppi/SmmAccess.h
gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
## Include/Ppi/SmmControl.h
gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
## Include/Ppi/PostBootScriptTable.h
gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
## Include/Ppi/SerialPortPei.h
gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}
## Include/Ppi/UfsHostController.h
gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}
## Include/Ppi/IpmiPpi.h
gPeiIpmiPpiGuid = { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}
## Include/Ppi/SdMmcHostController.h
gEdkiiPeiSdMmcHostControllerPpiGuid = { 0xb30dfeed, 0x947f, 0x4396, { 0xb1, 0x5a, 0xdf, 0xbd, 0xb9, 0x16, 0xdc, 0x24 }}
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
# This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
# If developer need implement such functionality, they should use BasePeCoffLib.
gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
## Print protocols define basic print functions to print the format unicode and ascii string.
# Include/Protocol/Print2.h
gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
gEfiPrint2SProtocolGuid = { 0xcc252d2, 0xc106, 0x4661, { 0xb5, 0xbd, 0x31, 0x47, 0xa4, 0xf8, 0x1f, 0x92 } }
## This protocol defines the generic memory test interfaces in Dxe phase.
# Include/Protocol/GenericMemoryTest.h
gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
## This protocol defines the Debugger Configuration interface.
# Include/Protocol/DebuggerConfiguration.h
gEfiDebuggerConfigurationProtocolGuid = { 0x577d959c, 0xe967, 0x4546, { 0x86, 0x20, 0xc7, 0x78, 0xfa, 0xe5, 0xda, 0x05 }}
## Include/Protocol/Dpc.h
gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
# Include/Protocol/FaultTolerantWrite.h
gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
# Include/Protocol/SmmFaultTolerantWrite.h
gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
# Include/Protocol/SwapAddressRange.h
gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
# Include/Protocol/SmmSwapAddressRange.h
gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
## This protocol is intended for use as a means to store data in the EFI SMM environment.
# Include/Protocol/SmmVariableProtocol.h
gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
# Include/Protocol/VariableLock.h
gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
## Include/Protocol/VarCheck.h
gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }
## Include/Protocol/SmmVarCheck.h
gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }
## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
# Include/Protocol/SmmFirmwareVolumeBlock.h
gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
# Include/Guid/DebugMask.h
gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
## Include/Protocol/LockBox.h
gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
## Include/Protocol/FormBrowserEx.h
gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
gEdkiiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
## Include/Protocol/EbcVmTest.h
gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
## Include/Protocol/EbcSimpleDebugger.h
gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
## Include/Protocol/BootLogo.h
gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
## Include/Protocol/DisplayProtocol.h
gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
## Include/Protocol/FormBrowserEx2.h
gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }
## Include/Protocol/UfsHostController.h
gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }
## Include/Protocol/EsrtManagement.h
gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}
## Include/Protocol/SmmExitBootServices.h
gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }
## Include/Protocol/SmmLegacyBoot.h
gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }
## Include/Protocol/SmmReadyToBoot.h
gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }
## Include/Protocol/PlatformLogo.h
gEdkiiPlatformLogoProtocolGuid = { 0x53cd299f, 0x2bc1, 0x40c0, { 0x8c, 0x07, 0x23, 0xf6, 0x4f, 0xdb, 0x30, 0xe0 } }
## Include/Protocol/FileExplorer.h
gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }
## Include/Protocol/IpmiProtocol.h
gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }
gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }
## PS/2 policy protocol abstracts the specific platform initialization and setting.
# Include/Protocol/Ps2Policy.h
gEfiPs2PolicyProtocolGuid = { 0x4DF19259, 0xDC71, 0x4D46, { 0xBE, 0xF1, 0x35, 0x7B, 0xB5, 0x78, 0xC4, 0x18 } }
## Include/Protocol/NonDiscoverableDevice.h
gEdkiiNonDiscoverableDeviceProtocolGuid = { 0x0d51905b, 0xb77e, 0x452a, {0xa2, 0xc0, 0xec, 0xa0, 0xcc, 0x8d, 0x51, 0x4a } }
MdeModulePkg/Include: Add IOMMU protocol definition. This protocol is to abstract DMA access from IOMMU. 1) Intel "DMAR" ACPI table. 2) AMD "IVRS" ACPI table 3) ARM "IORT" ACPI table. There might be multiple IOMMU engines on one platform. For example, one for graphic and one for rest PCI devices (such as ATA/USB). All IOMMU engines are reported by one ACPI table. All IOMMU protocol provider should be based upon ACPI table. This single IOMMU protocol can handle multiple IOMMU engines on one system. This IOMMU protocol provider can use UEFI device path to distinguish if the device is graphic or ATA/USB, and find out corresponding IOMMU engine. The IOMMU protocol provides 2 capabilities: A) Set DMA access attribute - such as write/read control. B) Remap DMA memory - such as remap above 4GiB system memory address to below 4GiB device address. It provides AllocateBuffer/FreeBuffer/Map/Unmap for DMA memory. The remapping can be static (fixed at build time) or dynamic (allocate at runtime). 4) AMD "SEV" feature. We can have an AMD SEV specific IOMMU driver to produce IOMMU protocol, and manage SEV bit. Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Leo Duran <leo.duran@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Previous patch Tested-by: Brijesh Singh <brijesh.singh@amd.com> Previous patch Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Leo Duran <leo.duran@amd.com>
2017-03-25 03:53:28 +01:00
## Include/Protocol/IoMmu.h
gEdkiiIoMmuProtocolGuid = { 0x4e939de9, 0xd948, 0x4b0f, { 0x88, 0xed, 0xe6, 0xe1, 0xce, 0x51, 0x7c, 0x1e } }
#
# [Error.gEfiMdeModulePkgTokenSpaceGuid]
# 0x80000001 | Invalid value provided.
# 0x80000002 | Reserved bits must be set to zero.
# 0x80000003 | Incorrect progress code provided.
# 0x80000004 | Invalid foreground color specified.
# 0x80000005 | Invalid background color specified.
# 0x80000006 | Incorrect error code provided.
#
[PcdsFeatureFlag]
## Indicates if the platform can support update capsule across a system reset.<BR><BR>
# TRUE - Supports update capsule across a system reset.<BR>
# FALSE - Does not support update capsule across a system reset.<BR>
# @Prompt Enable update capsule across a system reset.
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
## Indicates if all PCD PPI services will be enabled.<BR><BR>
# TRUE - All PCD PPI services will be produced.<BR>
# FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>
# @Prompt Enable full PEI PCD services.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
## Indicates if the Device Path To Text Protocol should be produced by the platform.
# It can be disabled to save size.<BR><BR>
# TRUE - Device Path To Text Protocol will be produced.<BR>
# FALSE - Device Path To Text Protocol will not be produced.<BR>
# @Prompt Enable Device Path to Text support.
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
## Indicates if the Device Path From Text Protocol should be produced by the platform.
# It can be disabled to save size.<BR><BR>
# TRUE - Device Path From Text Protocol will be produced.<BR>
# FALSE - Device Path From Text Protocol will not be produced.<BR>
# @Prompt Enable Device Path From Text support.
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
## Indicates if the statistics about variable usage will be collected. This information is
# stored as a vendor configuration table into the EFI system table.
# Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get
# variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>
# TRUE - Statistics about variable usage will be collected.<BR>
# FALSE - Statistics about variable usage will not be collected.<BR>
# @Prompt Enable variable statistics collection.
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
## Indicates if Unicode Collation Protocol will be installed.<BR><BR>
# TRUE - Installs Unicode Collation Protocol.<BR>
# FALSE - Does not install Unicode Collation Protocol.<BR>
# @Prompt Enable Unicode Collation support.
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>
# TRUE - Installs Unicode Collation 2 Protocol.<BR>
# FALSE - Does not install Unicode Collation 2 Protocol.<BR>
# @Prompt Enable Unicode Collation 2 support.
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
# It could be set FALSE to save size.<BR><BR>
# TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
# FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
# @Prompt Enable ConOut GOP support.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
# It could be set FALSE to save size.<BR><BR>
# TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
# FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
# @Prompt Enable ConOut UGA support.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.
# This PCD is used to tune PEI phase performance to reduce the search image time.
# It can be set according to the generated image section type.<BR><BR>
# TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>
# FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>
# @Prompt PeiCore search TE section first.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI
# interrupt to access usb device in the case of absence of usb stack.
# DUET platform requires the token to be TRUE.<BR><BR>
# TRUE - Turn off usb legacy support.<BR>
# FALSE - Does not turn off usb legacy support.<BR>
# @Prompt Turn off USB legacy support.
gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
## Indicates if HiiImageProtocol will be installed.
# FALSE is for size reduction.<BR><BR>
# TRUE - Installs HiiImageProtocol.<BR>
# FALSE - Does not install HiiImageProtocol.<BR>
# @Prompt Enable HII image support.
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
## Indicates if USB KeyBoard Driver disables the default keyboard layout.
# The default keyboard layout serves as the backup when no keyboard layout can be retrieved
# from HII database.<BR><BR>
# TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>
# FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>
# @Prompt Disable default keyboard layout in USB KeyBoard Driver.
gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>
# TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
# the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>
# FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.
# the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>
# @Prompt Enable framework backward compatibility support.
gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
## Indicates if HelloWorld Application will print the verbose information.
# This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>
# TRUE - HelloWorld Application will print the verbose information.<BR>
# FALSE - HelloWorld Application will not print the verbose information.<BR>
# @Prompt Enable HelloWorld print.
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>
# TRUE - Produces FULL FTW protocol services (total six APIs).<BR>
# FALSE - Only FTW Write service is available.<BR>
# @Prompt Enable FULL FTW services.
gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>
# TRUE - DXE IPL will support UEFI decompression.<BR>
# FALSE - DXE IPL will not support UEFI decompression to save space.<BR>
# @Prompt Enable UEFI decompression support in DXE IPL.
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
## Indicates if PciBus driver supports the hot plug device.<BR><BR>
# TRUE - PciBus driver supports the hot plug device.<BR>
# FALSE - PciBus driver doesn't support the hot plug device.<BR>
# @Prompt Enable PciBus hot plug device support.
gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>
# TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>
# FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>
# @Prompt Enable PCI bridge IO alignment probe.
gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
## Indicates if StatusCode is reported via Serial port.<BR><BR>
# TRUE - Reports StatusCode via Serial port.<BR>
# FALSE - Does not report StatusCode via Serial port.<BR>
# @Prompt Enable StatusCode via Serial port.
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
## Indicates if StatusCode is stored in memory.
# The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>
# TRUE - Stores StatusCode in memory.<BR>
# FALSE - Does not store StatusCode in memory.<BR>
# @Prompt Enable StatusCode via memory.
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>
# TRUE - Replays PEI phase StatusCode in DXE phased.<BR>
# FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>
# @Prompt Enable PEI StatusCode replay in DXE phase
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
## Indicates if ACPI SDT protocol will be installed.<BR><BR>
# TRUE - Installs ACPI SDT protocol.<BR>
# FALSE - Does not install ACPI SDT protocol.<BR>
# @Prompt Enable ACPI SDT support.
gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
# The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>
# TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
# FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
# @Prompt Enable unaligned PCI I/O support.
gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>
# TRUE - TEXT statement will always be set to GrayOut.<BR>
# FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>
# @Prompt Always GrayOut TEXT statement.
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>
# TRUE - The unselectable menu will be set to GrayOut.<BR>
# FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>
# @Prompt GrayOut read only menu.
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
## Indicates if recovery from IDE disk will be supported.<BR><BR>
# TRUE - Supports recovery from IDE disk.<BR>
# FALSE - Does not support recovery from IDE disk.<BR>
# @Prompt Enable recovery on IDE disk.
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>
# TRUE - Supports recovery from FAT floppy disk.<BR>
# FALSE - Does not support recovery from FAT floppy disk.<BR>
# @Prompt Enable recovery on FAT floppy disk.
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061
## Indicates if recovery from data CD will be supported.<BR><BR>
# TRUE - Supports recovery from data CD.<BR>
# FALSE - Does not support recovery from data CD.<BR>
# @Prompt Enable recovery on data CD.
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
## Indicates if recovery from FAT USB disk will be supported.<BR><BR>
# TRUE - Supports recovery from USB disk.<BR>
# FALSE - Does not support recovery from USB disk.<BR>
# @Prompt Enable recovery on FAT USB disk.
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>
# TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>
# FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>
# @Prompt Enable S3 performance data support.
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
## Indicates if PS2 keyboard does a extended verification during start.
# Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
# Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>
# TRUE - Turn on PS2 keyboard extended verification.<BR>
# FALSE - Turn off PS2 keyboard extended verification.<BR>
# @Prompt Turn on PS2 Keyboard Extended Verification
gEfiMdeModulePkgTokenSpaceGuid.PcdPs2KbdExtendedVerification|TRUE|BOOLEAN|0x00010072
## Indicates if Serial device uses half hand shake.<BR><BR>
# TRUE - Serial device uses half hand shake.<BR>
# FALSE - Serial device doesn't use half hand shake.<BR>
# @Prompt Enable Serial device Half Hand Shake
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073
## Indicates if HII data and configuration has been exported.<BR><BR>
# Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
# simulator platform because the performance cost for this feature.
# TRUE - Export HII data and configuration data.<BR>
# FALSE - Does not export HII data and configuration.<BR>
# @Prompt Enable export HII data and configuration to be used in OS runtime.
gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074
## Indicates if PS2 mouse does a extended verification during start.
# Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>
# TRUE - Turn on PS2 mouse extended verification. <BR>
# FALSE - Turn off PS2 mouse extended verification. <BR>
# @Prompt Turn on PS2 Mouse Extended Verification
gEfiMdeModulePkgTokenSpaceGuid.PcdPs2MouseExtendedVerification|TRUE|BOOLEAN|0x00010075
## Indicates whether 64-bit PCI MMIO BARs should degrade to 32-bit in the presence of an option ROM
# On X64 platforms, Option ROMs may contain code that executes in the context of a legacy BIOS (CSM),
# which requires that all PCI MMIO BARs are located below 4 GB
# TRUE - All PCI MMIO BARs of a device will be located below 4 GB if it has an option ROM
# FALSE - PCI MMIO BARs of a device may be located above 4 GB even if it has an option ROM
# @Prompt Degrade 64-bit PCI MMIO BARs for legacy BIOS option ROMs
gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|TRUE|BOOLEAN|0x0001003a
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.ARM, PcdsFeatureFlag.AARCH64]
gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE|BOOLEAN|0x0001003a
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
## Indicates if DxeIpl should switch to long mode to enter DXE phase.
# It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
# is built in firmware.<BR><BR>
# TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>
# FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>
# @Prompt DxeIpl switch to long mode.
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
## Indicates if DxeIpl should rebuild page tables. This flag only
# makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>
# TRUE - DxeIpl will rebuild page tables.<BR>
# FALSE - DxeIpl will not rebuild page tables.<BR>
# @Prompt DxeIpl rebuild page tables.
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
[PcdsFixedAtBuild]
## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>
# 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>
# 0: Disable the feature.<BR>
# Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>
# @Prompt Enable LMFA feature.
# @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
## Progress Code for OS Loader LoadImage start.<BR><BR>
# PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>
# @Prompt Progress Code for OS Loader LoadImage start.
# @ValidList 0x80000003 | 0x03058000
gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030
## Progress Code for OS Loader StartImage start.<BR><BR>
# PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>
# @Prompt Progress Code for OS Loader StartImage start.
# @ValidList 0x80000003 | 0x03058001
gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031
## Progress Code for S3 Suspend start.<BR><BR>
# PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>
# @Prompt Progress Code for S3 Suspend start.
# @ValidList 0x80000003 | 0x03078000
gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
## Progress Code for S3 Suspend end.<BR><BR>
# PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>
# @Prompt Progress Code for S3 Suspend end.
# @ValidList 0x80000003 | 0x03078001
gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
## Error Code for SetVariable failure.<BR><BR>
# EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>
# @Prompt Error Code for SetVariable failure.
# @ValidList 0x80000006 | 0x03058002
gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040
[PcdsFixedAtBuild, PcdsPatchableInModule]
## Dynamic type PCD can be registered callback function for Pcd setting action.
# PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function
# for a dynamic PCD used in PEI phase.
# @Prompt Max PEI PCD callback number per PCD entry.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress
# to store PCD value.
# @Prompt VPD base address.
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
## Maximum number of FV is supported by PeiCore's dispatching.
# @Prompt Maximum number of FV supported by PeiCore.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
## Maximum File count in every FV is supported by PeiCore's dispatching.
# PeiCore supported File type includes PEIM, Combined PEIM and FV.
# @Prompt Maximum File count per FV supported by PeiCore.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
## Maximum stack size for PeiCore.
# @Prompt Maximum stack size for PeiCore.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
## Maximum PPI count is supported by PeiCore's PPI database.
# @Prompt Maximum PPI count supported by PeiCore.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
## The maximum size of a single non-HwErr type variable.
# @Prompt Maximum variable size.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
## The maximum size of a single authenticated variable.
# The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.
# @Prompt Maximum authenticated variable size.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009
## The maximum size of single hardware error record variable.<BR><BR>
# In IA32/X64 platforms, this value should be larger than 1KB.<BR>
# In IA64 platforms, this value should be larger than 128KB.<BR>
# @Prompt Maximum HwErr variable size.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
# In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
# so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
# this value is used to guarantee the space of HwErr type variable and not populated by common variable.
# @Prompt HwErr variable storage size.
gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
## The size of maximum user NV variable space.<BR><BR>
# Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
# If the value is 0, it means user variable share the same NV storage with system variable,
# this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>
# If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,
# otherwise the variable will be regarded as user variable.<BR>
# 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>
# 2) Variables managed by Variable driver internally.<BR>
# 3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>
# 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>
# The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>
# @Prompt Maximum user NV variable space size.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009
## The size of NV variable space reserved at UEFI boottime.<BR><BR>
# Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
# In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.
# So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>
# Then the common NV variable space size at boottime will be
# (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>
# and the common NV variable space size at runtime will be
# (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>
# @Prompt Boottime reserved NV variable space size.
gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007
## Reclaim variable space at EndOfDxe.<BR><BR>
# The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>
# If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>
# @Prompt Reclaim variable space at EndOfDxe.
gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008
## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.
# @Prompt Variable storage size.
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
## FFS filename to find the ACPI tables.
# @Prompt FFS name of ACPI tables storage.
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
## FFS filename to find the capsule coalesce image.
# @Prompt FFS name of capsule coalesce image.
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
## Maximum number of performance log entries during PEI phase.
# Use PcdMaxPeiPerformanceLogEntries16 if the number of entries required is
# more than 255.
# @Prompt Maximum number of PEI performance log entries.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
## Maximum number of performance log entries during PEI phase.
# If set to 0, then PcdMaxPeiPerformanceLogEntries determines the number of
# entries. If greater than 0, then this PCD determines the number of entries,
# and PcdMaxPeiPerformanceLogEntries is ignored.
# @Prompt Maximum number of PEI performance log entries.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035
## RTC Update Timeout Value(microsecond).
# @Prompt RTC Update Timeout Value.
gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>
# TRUE - 16550 serial port registers are in MMIO space.<BR>
# FALSE - 16550 serial port registers are in I/O space.<BR>
# @Prompt Serial port registers use MMIO.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>
# TRUE - 16550 serial port hardware flow control will be enabled.<BR>
# FALSE - 16550 serial port hardware flow control will be disabled.<BR>
# @Prompt Enable serial port hardware flow control.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.
# This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>
# TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>
# FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>
# @Prompt Enable serial port cable detetion.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
# @Prompt Base address of serial port registers.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
## Baud rate for the 16550 serial port. Default is 115200 baud.
# @Prompt Baud rate for serial port.
# @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>
# BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>
# BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>
# BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>
# BIT7..BIT6 - Reserved. Must be 0.<BR>
#
# Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>
# @Prompt Serial port Line Control settings.
# @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>
# BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>
# BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>
# BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>
# BIT4..BIT3 - Reserved. Must be 0.<BR>
# BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>
# BIT7..BIT6 - Reserved. Must be 0.<BR>
#
# Default is to enable and clear all FIFOs.<BR>
# @Prompt Serial port FIFO Control settings.
# @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
## This setting can override the default TFTP block size. A value of 0 computes
# the default from MTU information. A non-zero value will be used as block size
# in bytes.
# @Prompt TFTP block size.
gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
# structure. The default value for this PCD is 0, which means that the DXE Core
# will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
# boundary as close to the top of memory as feasible. If this PCD is set to a
# value other than 0, then the DXE Core will first attempt to allocate the
# EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
# by this PCD, and if that allocation fails, retry the allocation on a 4MB
# boundary as close to the top of memory as feasible.
# @Prompt Maximum Efi System Table Pointer address.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>
# TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>
# FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>
# @Prompt Shadow Peim On S3 Boot.
gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>
# This PCD is used on other boot path except for S3 boot.
# TRUE - Shadow PEIM and PeiCore after memory is ready.<BR>
# FALSE - Not shadow PEIM after memory is ready.<BR>
# @Prompt Shadow Peim and PeiCore on boot
gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029
## The mask is used to control memory profile behavior.<BR><BR>
# BIT0 - Enable UEFI memory profile.<BR>
# BIT1 - Enable SMRAM profile.<BR>
# BIT7 - Disable recording at the start.<BR>
# @Prompt Memory Profile Property.
# @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0x7C) == 0
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041
## The mask is used to control SmiHandlerProfile behavior.<BR><BR>
# BIT0 - Enable SmiHandlerProfile.<BR>
# @Prompt SmiHandlerProfile Property.
# @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask & 0xFE) == 0
gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask|0|UINT8|0x00000108
## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>
# For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>
#
# Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
# EfiReservedMemoryType 0x0001<BR>
# EfiLoaderCode 0x0002<BR>
# EfiLoaderData 0x0004<BR>
# EfiBootServicesCode 0x0008<BR>
# EfiBootServicesData 0x0010<BR>
# EfiRuntimeServicesCode 0x0020<BR>
# EfiRuntimeServicesData 0x0040<BR>
# EfiConventionalMemory 0x0080<BR>
# EfiUnusableMemory 0x0100<BR>
# EfiACPIReclaimMemory 0x0200<BR>
# EfiACPIMemoryNVS 0x0400<BR>
# EfiMemoryMappedIO 0x0800<BR>
# EfiMemoryMappedIOPortSpace 0x1000<BR>
# EfiPalCode 0x2000<BR>
# EfiPersistentMemory 0x4000<BR>
# OEM Reserved 0x4000000000000000<BR>
# OS Reserved 0x8000000000000000<BR>
#
# e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>
#
# @Prompt Memory profile memory type.
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
## This PCD is to control which drivers need memory profile data.<BR><BR>
# For example:<BR>
# One image only (Shell):<BR>
# Header GUID<BR>
# {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>
# 0x7F, 0xFF, 0x04, 0x00}<BR>
# Two or more images (Shell + WinNtSimpleFileSystem):<BR>
# {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>
# 0x7F, 0x01, 0x04, 0x00,<BR>
# 0x04, 0x06, 0x14, 0x00, 0x8B, 0xE1, 0x25, 0x9C, 0xBA, 0x76, 0xDA, 0x43, 0xA1, 0x32, 0xDB, 0xB0, 0x99, 0x7C, 0xEF, 0xEF,<BR>
# 0x7F, 0xFF, 0x04, 0x00}<BR>
# @Prompt Memory profile driver path.
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileDriverPath|{0x0}|VOID*|0x00001043
## Set image protection policy. The policy is bitwise.
# If a bit is set, the image will be protected by DxeCore if it is aligned.
# The code section becomes read-only, and the data section becomes non-executable.
# If a bit is clear, the image will not be protected.<BR><BR>
# BIT0 - Image from unknown device. <BR>
# BIT1 - Image from firmware volume.<BR>
# @Prompt Set image protection policy.
# @ValidRange 0x80000002 | 0x00000000 - 0x0000001F
gEfiMdeModulePkgTokenSpaceGuid.PcdImageProtectionPolicy|0x00000002|UINT32|0x00001047
## Set DXE memory protection policy. The policy is bitwise.
# If a bit is set, memory regions of the associated type will be mapped
# non-executable.<BR><BR>
#
# Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
# EfiReservedMemoryType 0x0001<BR>
# EfiLoaderCode 0x0002<BR>
# EfiLoaderData 0x0004<BR>
# EfiBootServicesCode 0x0008<BR>
# EfiBootServicesData 0x0010<BR>
# EfiRuntimeServicesCode 0x0020<BR>
# EfiRuntimeServicesData 0x0040<BR>
# EfiConventionalMemory 0x0080<BR>
# EfiUnusableMemory 0x0100<BR>
# EfiACPIReclaimMemory 0x0200<BR>
# EfiACPIMemoryNVS 0x0400<BR>
# EfiMemoryMappedIO 0x0800<BR>
# EfiMemoryMappedIOPortSpace 0x1000<BR>
# EfiPalCode 0x2000<BR>
# EfiPersistentMemory 0x4000<BR>
# OEM Reserved 0x4000000000000000<BR>
# OS Reserved 0x8000000000000000<BR>
#
# NOTE: User must NOT set NX protection for EfiLoaderCode / EfiBootServicesCode / EfiRuntimeServicesCode. <BR>
# User MUST set the same NX protection for EfiBootServicesData and EfiConventionalMemory. <BR>
#
# e.g. 0x7FD5 can be used for all memory except Code. <BR>
# e.g. 0x7BD4 can be used for all memory except Code and ACPINVS/Reserved. <BR>
#
# @Prompt Set DXE memory protection policy.
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeNxMemoryProtectionPolicy|0x0000000|UINT64|0x00001048
## PCI Serial Device Info. It is an array of Device, Function, and Power Management
# information that describes the path that contains zero or more PCI to PCI briges
# followed by a PCI serial device. Each array entry is 4-bytes in length. The
# first byte is the PCI Device Number, then second byte is the PCI Function Number,
# and the last two bytes are the offset to the PCI power management capabilities
# register used to manage the D0-D3 states. If a PCI power management capabilities
# register is not present, then the last two bytes in the offset is set to 0. The
# array is terminated by an array entry with a PCI Device Number of 0xFF. For a
# non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.
# @Prompt Pci Serial Device Info
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,
# BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that
# describes the parameters of special PCI serial devices.
# Each array entry is 24-byte in length. The array is terminated
# by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a
# standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.
# The C style structure is defined as below:<BR>
# typedef struct {<BR>
# UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.<BR>
# UINT16 DeviceId; ///< Device ID to match the PCI device.<BR>
# UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.<BR>
# UINT64 Offset; ///< The byte offset into to the BAR.<BR>
# UINT8 BarIndex; ///< Which BAR to get the UART base address.<BR>
# UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.<BR>
# UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>
# UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>
# UINT8 Reserved[2];<BR>
# } PCI_SERIAL_PARAMETER;<BR>
# It contains zero or more instances of the above structure.<BR>
# For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs
# to contain two instances of the above structure, with the VendorId and DeviceId
# equals to the Device ID and Vendor ID of the device; If the PCI device uses the
# first two BARs to support two UARTs, BarIndex of first instance equals to 0 and
# BarIndex of second one equals to 1; If the PCI device uses the first BAR to
# support both UARTs, BarIndex of both instance equals to 0, Offset of first
# instance equals to 0 and Offset of second one equals to a value bigger than or
# equal to 8.<BR>
# For certain UART whose register needs to be accessed in DWORD aligned address,
# RegisterStride equals to 4.
# @Prompt Pci Serial Parameters
gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071
## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.
# @Prompt Serial Port Extended Transmit FIFO Size in Bytes
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068
## This PCD points to the file name GUID of the BootManagerMenuApp
# Platform can customize the PCD to point to different application for Boot Manager Menu
# @Prompt Boot Manager Menu File
gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b
## This PCD points to the formset GUID of the driver health management form
# The form will be popped up by BDS core when there are Configuration Required driver health intances.
# Platform can customize the PCD to point to different formset.
# @Prompt Driver Health Management Form
gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c
## The number of bytes between registers in serial device. The default is 1 byte.
# @Prompt Serial Port Register Stride in Bytes
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d
## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>
# Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>
# If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>
# @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.
gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A
## Indicates which ACPI versions are targeted by the ACPI tables exposed to the OS
# These values are aligned with the definitions in MdePkg/Include/Protocol/AcpiSystemDescriptionTable.h
# BIT 1 - EFI_ACPI_TABLE_VERSION_1_0B.<BR>
# BIT 2 - EFI_ACPI_TABLE_VERSION_2_0.<BR>
# BIT 3 - EFI_ACPI_TABLE_VERSION_3_0.<BR>
# BIT 4 - EFI_ACPI_TABLE_VERSION_4_0.<BR>
# BIT 5 - EFI_ACPI_TABLE_VERSION_5_0.<BR>
# @Prompt Exposed ACPI table versions.
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c
## This PCD defines the MAX repair count.
# The default value is 0 that means infinite.
# @Prompt MAX repair count
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxRepairCount|0x00|UINT32|0x00010076
## Status Code for Capsule subclass definitions.<BR><BR>
# EFI_OEM_SPECIFIC_SUBCLASS_CAPSULE = 0x00810000<BR>
# NOTE: The default value of this PCD may collide with other OEM specific status codes.
# Override the value of this PCD in the platform DSC file as needed.
# @Prompt Status Code for Capsule subclass definitions
# @ValidList 0x80000003 | 0x00810000
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeSubClassCapsule|0x00810000|UINT32|0x00000100
## Status Code for Capsule Process Begin.<BR><BR>
# EFI_CAPSULE_PROCESS_CAPSULES_BEGIN = (EFI_OEM_SPECIFIC | 0x00000001) = 0x00008001<BR>
# NOTE: The default value of this PCD may collide with other OEM specific status codes.
# Override the value of this PCD in the platform DSC file as needed.
# @Prompt Status Code for Capsule Process Begin
# @ValidList 0x80000003 | 0x00008001
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesBegin|0x00008001|UINT32|0x00000101
## Status Code for Capsule Process End.<BR><BR>
# EFI_CAPSULE_PROCESS_CAPSULES_END = (EFI_OEM_SPECIFIC | 0x00000002) = 0x00008002<BR>
# NOTE: The default value of this PCD may collide with other OEM specific status codes.
# Override the value of this PCD in the platform DSC file as needed.
# @Prompt Status Code for Capsule Process End
# @ValidList 0x80000003 | 0x00008002
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesEnd|0x00008002|UINT32|0x00000102
## Status Code for Capsule Process Updating Firmware.<BR><BR>
# EFI_CAPSULE_UPDATING_FIRMWARE = (EFI_OEM_SPECIFIC | 0x00000003) = 0x00008003<BR>
# NOTE: The default value of this PCD may collide with other OEM specific status codes.
# Override the value of this PCD in the platform DSC file as needed.
# @Prompt Status Code for Capsule Process Updating Firmware
# @ValidList 0x80000003 | 0x00008003
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdatingFirmware|0x00008003|UINT32|0x00000103
## Status Code for Capsule Process Update Firmware Success.<BR><BR>
# EFI_CAPSULE_UPDATE_FIRMWARE_SUCCESS = (EFI_OEM_SPECIFIC | 0x00000004) = 0x00008004<BR>
# NOTE: The default value of this PCD may collide with other OEM specific status codes.
# Override the value of this PCD in the platform DSC file as needed.
# @Prompt Status Code for Capsule Process Update Firmware Success
# @ValidList 0x80000003 | 0x00008004
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareSuccess|0x00008004|UINT32|0x00000104
## Status Code for Capsule Process Update Firmware Failed.<BR><BR>
# EFI_CAPSULE_UPDATE_FIRMWARE_FAILED = (EFI_OEM_SPECIFIC | 0x00000005) = 0x00008005<BR>
# NOTE: The default value of this PCD may collide with other OEM specific status codes.
# Override the value of this PCD in the platform DSC file as needed.
# @Prompt Status Code for Capsule Process Update Firmware Failed
# @ValidList 0x80000003 | 0x00008005
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareFailed|0x00008005|UINT32|0x00000105
## Status Code for Capsule Resetting System.<BR><BR>
# EFI_CAPSULE_RESETTING_SYSTEM = (EFI_OEM_SPECIFIC | 0x00000006) = 0x00008006<BR>
# NOTE: The default value of this PCD may collide with other OEM specific status codes.
# Override the value of this PCD in the platform DSC file as needed.
# @Prompt Status Code for Capsule Resetting System
# @ValidList 0x80000003 | 0x00008006
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeResettingSystem|0x00008006|UINT32|0x00000106
## CapsuleMax value in capsule report variable.
# @Prompt CapsuleMax value in capsule report variable.
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleMax|0xFFFF|UINT16|0x00000107
[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
# This PCD could be set to 0 then console output would be at max column and max row.
# @Prompt Console output row.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
## This PCD defines the Console output column. The default value is 80 according to UEFI spec.
# This PCD could be set to 0 then console output would be at max column and max row.
# @Prompt Console output column.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
## This PCD defines the video horizontal resolution.
# If this PCD is set to 0 then video resolution would be at highest resolution.
# @Prompt Video horizontal resolution.
gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009
## This PCD defines the video vertical resolution.
# If this PCD is set to 0 then video resolution would be at highest resolution.
# @Prompt Video vertical resolution.
gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a
# The 4 PCDs below are used to specify the video resolution and text mode of text setup.
# To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,
# PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.
# Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers
# (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work
# for text setup.
## Specify the video horizontal resolution of text setup.
# @Prompt Video Horizontal Resolution of Text Setup
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b
## Specify the video vertical resolution of text setup.
# @Prompt Video Vertical Resolution of Text Setup
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c
## Specify the console output column of text setup.
# @Prompt Console Output Column of Text Setup
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d
## Specify the console output row of text setup.
# @Prompt Console Output Row of Text Setup
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
## UART clock frequency is for the baud rate configuration.
# @Prompt Serial Port Clock Rate.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
## This PCD points to the front page formset GUID
# Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page
# @Prompt Front Page Formset.
gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e
## Base address of the NV variable range in flash device.
# @Prompt Base address of flash NV variable range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.
# The root cause is that variable driver will use FTW protocol to reclaim variable region.
# If the length of variable region is larger than FTW spare size, it means the whole variable region can not
# be reflushed through the manner of fault tolerant write.
# @Prompt Size of flash NV variable range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
# @Prompt Base address of flash FTW spare block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.
# The root cause is that variable driver will use FTW protocol to reclaim variable region.
# If the length of variable region is larger than FTW spare size, it means the whole variable region can not
# be reflushed through the manner of fault tolerant write.
# @Prompt Size of flash FTW spare block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
## Base address of the FTW working block range in flash device.
# If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
# @Prompt Base address of flash FTW working block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
## Size of the FTW working block range.
# If the value is less than one block size, the work space range should not span blocks.
# If the value is larger than one block size, it should be block size aligned.
# @Prompt Size of flash FTW working block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
## 64-bit Base address of the NV variable range in flash device.
# @Prompt 64-bit Base address of flash NV variable range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
# @Prompt 64-bit Base address of flash FTW spare block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
## 64-bit Base address of the FTW working block range in flash device.
# If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
# @Prompt 64-bit Base address of flash FTW working block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.
# The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
# @Prompt Reserved memory range for EMU variable NV storage.
gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
## This PCD defines the times to print hello world string.
# This PCD is a sample to explain UINT32 PCD usage.
# @Prompt HellowWorld print times.
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
## This PCD defines the HelloWorld print string.
# This PCD is a sample to explain String typed PCD usage.
# @Prompt HelloWorld print string.
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
## Indicates the maximum size of the capsule image with a reset flag that the platform can support.
# The default max size is 100MB (0x6400000) for more than one large capsule images.
# @Prompt Max size of populated capsule.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
## Indicates the maximum size of the capsule image without a reset flag that the platform can support.
# The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
# @Prompt Max size of non-populated capsule.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.
# @Prompt Firmware vendor.
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
## Firmware revision that is the default revision filled into the EFI System Table.
# @Prompt Firmware revision.
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
## Null-terminated Unicode string that describes the firmware version.
# @Prompt Firmware version string.
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
## Null-terminated Unicode string that contains the date the firmware was released
# @Prompt Firmware release data string.
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.
# (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>
# The default value in PeiPhase is 1 KBytes.<BR>
# The default value in DxePhase is 128 KBytes.<BR>
# @Prompt StatusCode memory size.
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
## Indicates if to reset system when memory type information changes.<BR><BR>
# TRUE - Resets system when memory type information changes.<BR>
# FALSE - Does not reset system when memory type information changes.<BR>
# @Prompt Reset on memory type information change.
gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
# Only following values defined in UEFI specification are valid:<BR><BR>
# 0x00 (EFI_BLACK)<BR>
# 0x01 (EFI_BLUE)<BR>
# 0x02 (EFI_GREEN)<BR>
# 0x03 (EFI_CYAN)<BR>
# 0x04 (EFI_RED)<BR>
# 0x05 (EFI_MAGENTA)<BR>
# 0x06 (EFI_BROWN)<BR>
# 0x07 (EFI_LIGHTGRAY)<BR>
# 0x08 (EFI_DARKGRAY)<BR>
# 0x09 (EFI_LIGHTBLUE)<BR>
# 0x0A (EFI_LIGHTGREEN)<BR>
# 0x0B (EFI_LIGHTCYAN)<BR>
# 0x0C (EFI_LIGHTRED)<BR>
# 0x0D (EFI_LIGHTMAGENTA)<BR>
# 0x0E (EFI_YELLOW)<BR>
# 0x0F (EFI_WHITE)<BR>
# @Prompt Foreground color for browser subtile.
# @ValidRange 0x80000004 | 0x00 - 0x0F
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
# Only following values defined in UEFI specification are valid:<BR><BR>
# 0x00 (EFI_BLACK)<BR>
# 0x01 (EFI_BLUE)<BR>
# 0x02 (EFI_GREEN)<BR>
# 0x03 (EFI_CYAN)<BR>
# 0x04 (EFI_RED)<BR>
# 0x05 (EFI_MAGENTA)<BR>
# 0x06 (EFI_BROWN)<BR>
# 0x07 (EFI_LIGHTGRAY)<BR>
# 0x08 (EFI_DARKGRAY)<BR>
# 0x09 (EFI_LIGHTBLUE)<BR>
# 0x0A (EFI_LIGHTGREEN)<BR>
# 0x0B (EFI_LIGHTCYAN)<BR>
# 0x0C (EFI_LIGHTRED)<BR>
# 0x0D (EFI_LIGHTMAGENTA)<BR>
# 0x0E (EFI_YELLOW)<BR>
# 0x0F (EFI_WHITE)<BR>
# @Prompt Foreground color for browser field.
# @ValidRange 0x80000004 | 0x00 - 0x0F
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
# The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>
# 0x00 (EFI_BLACK)<BR>
# 0x01 (EFI_BLUE)<BR>
# 0x02 (EFI_GREEN)<BR>
# 0x03 (EFI_CYAN)<BR>
# 0x04 (EFI_RED)<BR>
# 0x05 (EFI_MAGENTA)<BR>
# 0x06 (EFI_BROWN)<BR>
# 0x07 (EFI_LIGHTGRAY)<BR>
# 0x08 (EFI_DARKGRAY)<BR>
# 0x09 (EFI_LIGHTBLUE)<BR>
# 0x0A (EFI_LIGHTGREEN)<BR>
# 0x0B (EFI_LIGHTCYAN)<BR>
# 0x0C (EFI_LIGHTRED)<BR>
# 0x0D (EFI_LIGHTMAGENTA)<BR>
# 0x0E (EFI_YELLOW)<BR>
# 0x0F (EFI_WHITE)<BR>
# @Prompt Foreground color for highlighted browser field.
# @ValidRange 0x80000004 | 0x00 - 0x0F
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
# The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>
# 0x00 (EFI_BACKGROUND_BLACK)<BR>
# 0x10 (EFI_BACKGROUND_BLUE)<BR>
# 0x20 (EFI_BACKGROUND_GREEN)<BR>
# 0x30 (EFI_BACKGROUND_CYAN)<BR>
# 0x40 (EFI_BACKGROUND_RED)<BR>
# 0x50 (EFI_BACKGROUND_MAGENTA)<BR>
# 0x60 (EFI_BACKGROUND_BROWN)<BR>
# 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>
# @Prompt Background color for highlighted browser field.
# @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
## Time in second to delay for SATA devices to spin-up for recovery.
# @Prompt SATA spin-up delay time in second for recovery path.
gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
MdeModulePkg PiDxeS3BootScriptLib: Remove a hidden assumption. What to do: 1. Remove a hidden assumption "No SMM driver writes BootScript between SmmReadyToLock and S3SleepEntryCallback". 1.1. Use SmmExitBootServices and SmmLegacyBoot notification to record AtRuntime flag. 1.2. Use mBootScriptDataBootTimeGuid LockBox to save boot time boot script data to handle potential INSERT boot script at runtime in SMM. 2. Do not depend on OS to help restore ACPINvs data and use EfiReservedMemoryType instead of EfiACPIMemoryNVS. 2.1. Use mBootScriptSmmPrivateDataGuid LockBox to save boot script SMM private data with BackFromS3 = TRUE at runtime. S3 resume will help restore it to tell the Library the system is back from S3. Why to do: 1. The hidden assumption "No SMM driver writes BootScript between SmmReadyToLock and S3SleepEntryCallback" will cause confusion to the library's consumer and block the usage of "SMM driver writes BootScript after SmmReadyToLock". So Remove the assumption. 2. In original code, there might be a corner case that malicious code patch ACPINvs boot TableLength field same as SMM boot script. So that it can skip the table restore. The impact is that BootScript in SMM may be overridden by malicious code. -------------------- CopyMem ((VOID*)&TableHeader, (VOID*)mS3BootScriptTablePtr->TableBase, sizeof(EFI_BOOT_SCRIPT_TABLE_HEADER)); if (mS3BootScriptTablePtr->TableLength + sizeof(EFI_BOOT_SCRIPT_TERMINATE) != TableHeader.TableLength) { // TableLength is in NVS ...... // // NOTE: We should NOT use TableHeader.TableLength, because it is already updated to be whole length. // mS3BootScriptTablePtr->TableLength = (UINT32)(mLockBoxLength - sizeof(EFI_BOOT_SCRIPT_TERMINATE)); ? This line can be skipped. -------------------- So use EfiReservedMemoryType instead of EfiACPIMemoryNVS as the code has been updated to not depend on OS to help restore ACPINvs data. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18467 6f19259b-4bc3-4df7-8a09-765794883524
2015-09-15 09:49:12 +02:00
## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory
# to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.
# When changing the value of this PCD, the platform developer should make sure the memory size is
# large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.
# @Prompt Reserved page number for S3 Boot Script Runtime Table.
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
# The default size is 32K. When changing the value of this PCD, the platform developer should
# make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.
# @Prompt Stack size for CapsulePei transfer to long mode.
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D
## Indicates if 1G page table will be enabled.<BR><BR>
# TRUE - 1G page table will be enabled.<BR>
# FALSE - 1G page table will not be enabled.<BR>
# @Prompt Enable 1G page table support.
gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E
## Indicates if the Single Root I/O virtualization is supported.<BR><BR>
# TRUE - Single Root I/O virtualization is supported.<BR>
# FALSE - Single Root I/O virtualization is not supported.<BR>
# @Prompt Enable SRIOV support.
gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
## Indicates if the Alternative Routing-ID is supported.<BR><BR>
# TRUE - Alternative Routing-ID is supported.<BR>
# FALSE - Alternative Routing-ID is not supported.<BR>
# @Prompt Enable ARI support.
gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>
# TRUE - Multi Root I/O virtualization is supported.<BR>
# FALSE - Multi Root I/O virtualization is not supported.<BR>
# @Prompt Enable MRIOV support.
gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>
# BITN set indicates 2 of n+12 power<BR>
# BIT0 set indicates 4KB alignment<BR>
# BIT1 set indicates 8KB alignment<BR>
# @Prompt SRIOV system page size.
gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
## SMBIOS version.
# @Prompt SMBIOS version.
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0301|UINT16|0x00010055
## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
# @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x1|UINT8|0x0001006A
## SMBIOS produce method.
# BIT0 set indicates 32-bit entry point and table are produced.<BR>
# BIT1 set indicates 64-bit entry point and table are produced.<BR>
# @Prompt The policy to produce SMBIOS entry point and table.
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069
## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
# the extension FPDT boot records received after ReadyToBoot and before ExitBootService.
# @Prompt Pad size for extension FPDT boot records.
gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
## Indicates if ConIn device are connected on demand.<BR><BR>
# TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
# by Consplitter should be called before any real key read operation.<BR>
# FALSE - ConIn device may be connected normally during BDS.<BR>
# @Prompt ConIn connect on demand.
gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060
## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>
# TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>
# FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>
# @Prompt Enable ATA S.M.A.R.T feature.
gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065
## Indicates if full PCI enumeration is disabled.<BR><BR>
# TRUE - Full PCI enumeration is disabled.<BR>
# FALSE - Full PCI enumeration is not disabled.<BR>
# @Prompt Disable full PCI enumeration.
gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048
## Disk I/O - Number of Data Buffer block.
# Define the size in block of the pre-allocated buffer. It provide better
# performance for large Disk I/O requests.
# @Prompt Disk I/O - Number of Data Buffer block.
gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039
## This PCD specifies the PCI-based UFS host controller mmio base address.
# Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS
# host controllers, their mmio base addresses are calculated one by one from this base address.
# @Prompt Mmio base address of pci-based UFS host controller.
gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061
## Specify Max ESRT cache entry number supported for FMP instances
#
# @Prompt Max FMP ESRT entry number to be synced & cached in repository.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b
## Specify Max ESRT cache entry number supported for Non FMP instances
#
# @Prompt Max Non-FMP ESRT entry number to be cached in repository.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c
## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process
#
# @Prompt Flag to request system reboot after processing capsule.
gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d
## Publish PropertiesTable or not.
#
# If this PCD is TRUE, DxeCore publishs PropertiesTable.
# DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all
# PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in
# PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.
# If this PCD is FALSE, DxeCore does not publish PropertiesTable.
#
# If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:
# 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and
# use EfiRuntimeServicesData for runtime driver PE image header and other section.
# 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.
# 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.
# 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.
#
# NOTE: Platform need gurantee this PCD is set correctly. Platform should set
# this PCD to be TURE if and only if all runtime driver has seperated Code/Data
# section. If PE code/data sections are merged, the result is unpredictable.
#
# UEFI 2.6 specification does not recommend to use this BIT0 attribute.
#
# @Prompt Publish UEFI PropertiesTable.
gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|FALSE|BOOLEAN|0x0000006e
## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
# @Prompt Default OEM ID for ACPI table creation.
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
## Default OEM Table ID for ACPI table creation, it is "EDK2 ".
# According to ACPI specification, this field is particularly useful when
# defining a definition block to distinguish definition block functions.
# The OEM assigns each dissimilar table a new OEM Table ID.
# This PCD is ignored for definition block.
# @Prompt Default OEM Table ID for ACPI table creation.
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
## Default OEM Revision for ACPI table creation.
# According to ACPI specification, for LoadTable() opcode, the OS can also
# check the OEM Table ID and Revision ID against a database for a newer
# revision Definition Block of the same OEM Table ID and load it instead.
# This PCD is ignored for definition block.
# @Prompt Default OEM Revision for ACPI table creation.
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
## Default Creator ID for ACPI table creation.
# According to ACPI specification, for tables containing Definition Blocks,
# this is the ID for the ASL Compiler.
# This PCD is ignored for definition block.
# @Prompt Default Creator ID for ACPI table creation.
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
## Default Creator Revision for ACPI table creation.
# According to ACPI specification, for tables containing Definition Blocks,
# this is the revision for the ASL Compiler.
# This PCD is ignored for definition block.
# @Prompt Default Creator Revision for ACPI table creation.
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
## Indicates if to set NX for stack.<BR><BR>
# For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>
# For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require
# IA32 PAE is supported and Execute Disable Bit is available.<BR>
# TRUE - to set NX for stack.<BR>
# FALSE - Not to set NX for stack.<BR>
# @Prompt Set NX for stack.
gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
## This PCD specifies the PCI-based SD/MMC host controller mmio base address.
# Define the mmio base address of the pci-based SD/MMC host controller. If there are multiple SD/MMC
# host controllers, their mmio base addresses are calculated one by one from this base address.
# @Prompt Mmio base address of pci-based SD/MMC host controller.
gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcPciHostControllerMmioBase|0xd0000000|UINT32|0x30001043
## Indicates if ACPI S3 will be enabled.<BR><BR>
# TRUE - ACPI S3 will be enabled.<BR>
# FALSE - ACPI S3 will be disabled.<BR>
# @Prompt ACPI S3 Enable.
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000
## Specify memory size for boot script executor stack usage in S3 phase.
# The default size 32K. When changing the value make sure the memory size is large enough
# to meet boot script executor requirement in the S3 phase.
# @Prompt Reserved S3 Boot Script Stack ACPI Memory Size
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000
## Indicates if to use the optimized timing for best PS2 detection performance.
# Note this PCD could be set to TRUE for best boot performance and set to FALSE for best device compatibility.<BR><BR>
# TRUE - Use the optimized timing for best PS2 detection performance.<BR>
# FALSE - Use the normal timing to detect PS2.<BR>
# @Prompt Enable fast PS2 detection
gEfiMdeModulePkgTokenSpaceGuid.PcdFastPS2Detection|FALSE|BOOLEAN|0x30001044
## This is recover file name in PEI phase.
# The file must be in the root directory.
# The file name must be the 8.3 format.
# The PCD data must be in UNICODE format.
# @Prompt Recover file name in PEI phase
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryFileName|L"FVMAIN.FV"|VOID*|0x30001045
## This PCD hold a list GUIDs for the ImageTypeId to indicate the
# FMP capsule is a system FMP.
# @Prompt A list of system FMP ImageTypeId GUIDs
gEfiMdeModulePkgTokenSpaceGuid.PcdSystemFmpCapsuleImageTypeIdGuid|{0x0}|VOID*|0x30001046
## This PCD holds the address mask for page table entries when memory encryption is
# enabled on AMD processors supporting the Secure Encrypted Virtualization (SEV) feature.
# This mask should be applied when creating 1:1 virtual to physical mapping tables.
# @Prompt The address mask when memory encryption is enabled.
gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0|UINT64|0x30001047
[PcdsPatchableInModule]
## Specify memory size with page number for PEI code when
# Loading Module at Fixed Address feature is enabled.
# The value will be set by the build tool.
# @Prompt LMFA PEI code page number.
# @ValidList 0x80000001 | 0
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
## Specify memory size with page number for DXE boot time code when
# Loading Module at Fixed Address feature is enabled.
# The value will be set by the build tool.
# @Prompt LMFA DXE boot code page number.
# @ValidList 0x80000001 | 0
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
## Specify memory size with page number for DXE runtime code when
# Loading Module at Fixed Address feature is enabled.
# The value will be set by the build tool.
# @Prompt LMFA DXE runtime code page number.
# @ValidList 0x80000001 | 0
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
## Specify memory size with page number for SMM code when
# Loading Module at Fixed Address feature is enabled.
# The value will be set by the build tool.
# @Prompt LMFA SMM code page number.
# @ValidList 0x80000001 | 0
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
[PcdsDynamic, PcdsDynamicEx]
## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
# instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
# only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
# default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
# @Prompt S3 Boot Script Table Private Data pointer.
# @ValidList 0x80000001 | 0x0
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
# instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
# only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
# default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
# @Prompt S3 Boot Script Table Private Smm Data pointer.
# @ValidList 0x80000001 | 0x0
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
# Virtual to Physical mapping according to the processor physical address bits.
# @Prompt Identify Mapping Page Table pointer.
# @ValidList 0x80000001 | 0x0
gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
## This dynamic PCD holds the information if there is any test key used by the platform.
# @Prompt If there is any test key used by the platform.
gEfiMdeModulePkgTokenSpaceGuid.PcdTestKeyUsed|FALSE|BOOLEAN|0x00030003
[UserExtensions.TianoCore."ExtraFiles"]
MdeModulePkgExtra.uni