audk/MdePkg/Library/DxePcdLib/DxePcdLib.c

/** @file
Implementation of PcdLib class library for DXE phase.

Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials                          
are licensed and made available under the terms and conditions of the BSD License         
which accompanies this distribution.  The full text of the license may be found at        
http://opensource.org/licenses/bsd-license.php                                            
                                                                                          
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             


**/


#include <PiDxe.h>

#include <Protocol/Pcd.h>
#include <Protocol/PiPcd.h>

#include <Library/PcdLib.h>
#include <Library/DebugLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/BaseMemoryLib.h>

PCD_PROTOCOL     *mPcd = NULL;
EFI_PCD_PROTOCOL *mPiPcd = NULL;

/**
  The constructor function caches the PCD_PROTOCOL pointer.

  @param[in] ImageHandle The firmware allocated handle for the EFI image.  
  @param[in] SystemTable A pointer to the EFI System Table.
  
  @retval EFI_SUCCESS The constructor always return EFI_SUCCESS.

**/
EFI_STATUS
EFIAPI
PcdLibConstructor (
  IN EFI_HANDLE        ImageHandle,
  IN EFI_SYSTEM_TABLE  *SystemTable
  )
{
  EFI_STATUS  Status;

  //
  // PCD protocol need to be installed before the module access Dynamic type PCD.
  // But dynamic type PCD is not required in PI 1.2 specification.
  // 
  gBS->LocateProtocol (&gPcdProtocolGuid, NULL, (VOID **)&mPcd);
  
  //
  // PI Pcd protocol defined in PI 1.2 vol3 should be installed before the module 
  // access DynamicEx type PCD.
  //
  Status = gBS->LocateProtocol (&gEfiPcdProtocolGuid, NULL, (VOID **) &mPiPcd);
  
  ASSERT_EFI_ERROR (Status);
  ASSERT (mPiPcd!= NULL);

  return Status;
}


/**
  This function provides a means by which SKU support can be established in the PCD infrastructure.

  Sets the current SKU in the PCD database to the value specified by SkuId.  SkuId is returned.
  If SkuId >= PCD_MAX_SKU_ID, then ASSERT(). 

  @param  SkuId   The SKU value that will be used when the PCD service retrieves and sets values
                  associated with a PCD token.

  @return  Return the SKU ID that just be set.

**/
UINTN
EFIAPI
LibPcdSetSku (
  IN UINTN   SkuId
  )
{
  ASSERT (mPcd != NULL);
  ASSERT (SkuId < PCD_MAX_SKU_ID);

  mPcd->SetSku (SkuId);

  return SkuId;
}



/**
  This function provides a means by which to retrieve a value for a given PCD token.
  
  Returns the 8-bit value for the token specified by TokenNumber. 

  @param[in]  TokenNumber The PCD token number to retrieve a current value for.

  @return Returns the 8-bit value for the token specified by TokenNumber. 

**/
UINT8
EFIAPI
LibPcdGet8 (
  IN UINTN             TokenNumber
  )
{
  ASSERT (mPcd != NULL);
  return mPcd->Get8 (TokenNumber);
}



/**
  This function provides a means by which to retrieve a value for a given PCD token.
  
  Returns the 16-bit value for the token specified by TokenNumber. 

  @param[in]  TokenNumber The PCD token number to retrieve a current value for.

  @return Returns the 16-bit value for the token specified by TokenNumber. 

**/
UINT16
EFIAPI
LibPcdGet16 (
  IN UINTN             TokenNumber
  )
{
  ASSERT (mPcd != NULL);
  return mPcd->Get16 (TokenNumber);
}



/**
  This function provides a means by which to retrieve a value for a given PCD token.
  
  Returns the 32-bit value for the token specified by TokenNumber. 

  @param[in]  TokenNumber The PCD token number to retrieve a current value for.

  @return Returns the 32-bit value for the token specified by TokenNumber.

**/
UINT32
EFIAPI
LibPcdGet32 (
  IN UINTN             TokenNumber
  )
{
  ASSERT (mPcd != NULL);
  return mPcd->Get32 (TokenNumber);
}



/**
  This function provides a means by which to retrieve a value for a given PCD token.
  
  Returns the 64-bit value for the token specified by TokenNumber.

  @param[in]  TokenNumber The PCD token number to retrieve a current value for.

  @return Returns the 64-bit value for the token specified by TokenNumber.

**/
UINT64
EFIAPI
LibPcdGet64 (
  IN UINTN             TokenNumber
  )
{
  ASSERT (mPcd != NULL);
  return mPcd->Get64 (TokenNumber);
}



/**
  This function provides a means by which to retrieve a value for a given PCD token.
  
  Returns the pointer to the buffer of the token specified by TokenNumber.

  @param[in]  TokenNumber The PCD token number to retrieve a current value for.

  @return Returns the pointer to the token specified by TokenNumber.

**/
VOID *
EFIAPI
LibPcdGetPtr (
  IN UINTN             TokenNumber
  )
{
  ASSERT (mPcd != NULL);
  return mPcd->GetPtr (TokenNumber);
}



/**
  This function provides a means by which to retrieve a value for a given PCD token.
  
  Returns the Boolean value of the token specified by TokenNumber. 

  @param[in]  TokenNumber The PCD token number to retrieve a current value for.

  @return Returns the Boolean value of the token specified by TokenNumber. 

**/
BOOLEAN 
EFIAPI
LibPcdGetBool (
  IN UINTN             TokenNumber
  )
{
  ASSERT (mPcd != NULL);
  return mPcd->GetBool (TokenNumber);
}



/**
  This function provides a means by which to retrieve the size of a given PCD token.

  @param[in]  TokenNumber The PCD token number to retrieve a current value for.

  @return Returns the size of the token specified by TokenNumber. 

**/
UINTN
EFIAPI
LibPcdGetSize (
  IN UINTN             TokenNumber
  )
{
  ASSERT (mPcd != NULL);
  return mPcd->GetSize (TokenNumber);
}



/**
  This function provides a means by which to retrieve a value for a given PCD token.
  
  Returns the 8-bit value for the token specified by TokenNumber and Guid.
  
  If Guid is NULL, then ASSERT(). 

  @param[in]  Guid         The pointer to a 128-bit unique value that designates 
                           which namespace to retrieve a value from.
  @param[in]  TokenNumber  The PCD token number to retrieve a current value for.

  @return Return the UINT8.

**/
UINT8
EFIAPI
LibPcdGetEx8 (
  IN CONST GUID        *Guid,
  IN UINTN             TokenNumber
  )
{
  ASSERT (Guid != NULL);
  
  return mPiPcd->Get8 (Guid, TokenNumber);
}


/**
  This function provides a means by which to retrieve a value for a given PCD token.

  Returns the 16-bit value for the token specified by TokenNumber and Guid.
  
  If Guid is NULL, then ASSERT(). 

  @param[in]  Guid         The pointer to a 128-bit unique value that designates 
                           which namespace to retrieve a value from.
  @param[in]  TokenNumber  The PCD token number to retrieve a current value for.

  @return Return the UINT16.

**/
UINT16
EFIAPI
LibPcdGetEx16 (
  IN CONST GUID        *Guid,
  IN UINTN             TokenNumber
  )
{
  ASSERT (Guid != NULL);

  return mPiPcd->Get16 (Guid, TokenNumber);
}


/**
  Returns the 32-bit value for the token specified by TokenNumber and Guid.
  If Guid is NULL, then ASSERT(). 

  @param[in]  Guid         The pointer to a 128-bit unique value that designates 
                           which namespace to retrieve a value from.
  @param[in]  TokenNumber  The PCD token number to retrieve a current value for.

  @return Return the UINT32.

**/
UINT32
EFIAPI
LibPcdGetEx32 (
  IN CONST GUID        *Guid,
  IN UINTN             TokenNumber
  )
{
  ASSERT (Guid != NULL);

  return mPiPcd->Get32 (Guid, TokenNumber);
}



/**
  This function provides a means by which to retrieve a value for a given PCD token.
  
  Returns the 64-bit value for the token specified by TokenNumber and Guid.
  
  If Guid is NULL, then ASSERT(). 

  @param[in]  Guid          The pointer to a 128-bit unique value that designates 
                            which namespace to retrieve a value from.
  @param[in]  TokenNumber   The PCD token number to retrieve a current value for.

  @return Return the UINT64.

**/
UINT64
EFIAPI
LibPcdGetEx64 (
  IN CONST GUID        *Guid,
  IN UINTN             TokenNumber
  )
{
  ASSERT (Guid != NULL);
  
  return mPiPcd->Get64 (Guid, TokenNumber);
}



/**
  This function provides a means by which to retrieve a value for a given PCD token.
  
  Returns the pointer to the buffer of token specified by TokenNumber and Guid.
  
  If Guid is NULL, then ASSERT(). 

  @param[in]  Guid          The pointer to a 128-bit unique value that designates 
                            which namespace to retrieve a value from.
  @param[in]  TokenNumber   The PCD token number to retrieve a current value for.

  @return Return the VOID* pointer.

**/
VOID *
EFIAPI
LibPcdGetExPtr (
  IN CONST GUID        *Guid,
  IN UINTN             TokenNumber
  )
{
  ASSERT (Guid != NULL);

  return mPiPcd->GetPtr (Guid, TokenNumber);
}



/**
  This function provides a means by which to retrieve a value for a given PCD token.
  
  Returns the Boolean value of the token specified by TokenNumber and Guid. 
  
  If Guid is NULL, then ASSERT(). 

  @param[in]  Guid          The pointer to a 128-bit unique value that designates 
                            which namespace to retrieve a value from.
  @param[in]  TokenNumber   The PCD token number to retrieve a current value for.

  @return Return the BOOLEAN.

**/
BOOLEAN
EFIAPI
LibPcdGetExBool (
  IN CONST GUID        *Guid,
  IN UINTN             TokenNumber
  )
{
  ASSERT (Guid != NULL);

  return mPiPcd->GetBool (Guid, TokenNumber);
}



/**
  This function provides a means by which to retrieve the size of a given PCD token.
  
  Returns the size of the token specified by TokenNumber and Guid. 
  
  If Guid is NULL, then ASSERT(). 

  @param[in]  Guid          The pointer to a 128-bit unique value that designates 
                            which namespace to retrieve a value from.
  @param[in]  TokenNumber   The PCD token number to retrieve a current value for.

  @return Return the size.

**/
UINTN
EFIAPI
LibPcdGetExSize (
  IN CONST GUID        *Guid,
  IN UINTN             TokenNumber
  )
{
  ASSERT (Guid != NULL);

  return mPiPcd->GetSize (Guid, TokenNumber);
}



/**
  This function provides a means by which to set a value for a given PCD token.
  
  Sets the 8-bit value for the token specified by TokenNumber 
  to the value specified by Value.  Value is returned.
  
  @param[in]  TokenNumber   The PCD token number to set a current value for.
  @param[in]  Value         The 8-bit value to set.

  @return Return the value been set.

**/
UINT8
EFIAPI
LibPcdSet8 (
  IN UINTN             TokenNumber,
  IN UINT8             Value
  )
{
  EFI_STATUS Status;

  ASSERT (mPcd != NULL);
  Status = mPcd->Set8 (TokenNumber, Value);

  ASSERT_EFI_ERROR (Status);
  
  return Value;
}



/**
  This function provides a means by which to set a value for a given PCD token.
  
  Sets the 16-bit value for the token specified by TokenNumber 
  to the value specified by Value.  Value is returned.
  
  @param[in]  TokenNumber   The PCD token number to set a current value for.
  @param[in]  Value         The 16-bit value to set.

  @return Return the value been set.

**/
UINT16
EFIAPI
LibPcdSet16 (
  IN UINTN             TokenNumber,
  IN UINT16            Value
  )
{
  EFI_STATUS Status;

  ASSERT (mPcd != NULL);
  Status = mPcd->Set16 (TokenNumber, Value);

  ASSERT_EFI_ERROR (Status);
  
  return Value;
}



/**
  This function provides a means by which to set a value for a given PCD token.
  
  Sets the 32-bit value for the token specified by TokenNumber 
  to the value specified by Value.  Value is returned.
  
  @param[in]  TokenNumber   The PCD token number to set a current value for.
  @param[in]  Value         The 32-bit value to set.

  @return Return the value been set.

**/
UINT32
EFIAPI
LibPcdSet32 (
  IN UINTN             TokenNumber,
  IN UINT32            Value
  )
{
  EFI_STATUS Status;
  
  ASSERT (mPcd != NULL);
  Status = mPcd->Set32 (TokenNumber, Value);

  ASSERT_EFI_ERROR (Status);

  return Value;
}



/**
  This function provides a means by which to set a value for a given PCD token.
  
  Sets the 64-bit value for the token specified by TokenNumber 
  to the value specified by Value.  Value is returned.
  
  @param[in]  TokenNumber   The PCD token number to set a current value for.
  @param[in]  Value         The 64-bit value to set.

  @return Return the value been set.

**/
UINT64
EFIAPI
LibPcdSet64 (
  IN UINTN             TokenNumber,
  IN UINT64            Value
  )
{
  EFI_STATUS Status;

  ASSERT (mPcd != NULL);
  Status = mPcd->Set64 (TokenNumber, Value);

  ASSERT_EFI_ERROR (Status);

  return Value;
}



/**
  This function provides a means by which to set a value for a given PCD token.
  
  Sets a buffer for the token specified by TokenNumber to the value 
  specified by Buffer and SizeOfBuffer.  Buffer is returned.  
  If SizeOfBuffer is greater than the maximum size support by TokenNumber, 
  then set SizeOfBuffer to the maximum size supported by TokenNumber and 
  return NULL to indicate that the set operation was not actually performed.  

  If SizeOfBuffer is set to MAX_ADDRESS, then SizeOfBuffer must be set to the 
  maximum size supported by TokenName and NULL must be returned.
  
  If SizeOfBuffer is NULL, then ASSERT().
  If SizeOfBuffer > 0 and Buffer is NULL, then ASSERT().
  
  @param[in]      TokenNumber   The PCD token number to set a current value for.
  @param[in, out] SizeOfBuffer  The size, in bytes, of Buffer.
  @param[in]      Buffer        A pointer to the buffer to set.

  @return Return the pointer for the buffer been set.

**/
VOID *
EFIAPI
LibPcdSetPtr (
  IN        UINTN             TokenNumber,
  IN OUT    UINTN             *SizeOfBuffer,
  IN CONST  VOID              *Buffer
  )
{
  EFI_STATUS Status;

  ASSERT (mPcd != NULL);
  ASSERT (SizeOfBuffer != NULL);

  if (*SizeOfBuffer > 0) {
    ASSERT (Buffer != NULL);
  }

  Status = mPcd->SetPtr (TokenNumber, SizeOfBuffer, (VOID *) Buffer);

  if (EFI_ERROR (Status)) {
    return NULL;
  }

  return (VOID *) Buffer;
}



/**
  This function provides a means by which to set a value for a given PCD token.
  
  Sets the Boolean value for the token specified by TokenNumber 
  to the value specified by Value.  Value is returned.
  
  @param[in]  TokenNumber   The PCD token number to set a current value for.
  @param[in]  Value         The boolean value to set.

  @return Return the value been set.

**/
BOOLEAN
EFIAPI
LibPcdSetBool (
  IN UINTN             TokenNumber,
  IN BOOLEAN           Value
  )
{
  EFI_STATUS Status;

  ASSERT (mPcd != NULL);
  Status = mPcd->SetBool (TokenNumber, Value);

  ASSERT_EFI_ERROR (Status);

  return Value;
}



/**
  This function provides a means by which to set a value for a given PCD token.
  
  Sets the 8-bit value for the token specified by TokenNumber and 
  Guid to the value specified by Value. Value is returned.
  
  If Guid is NULL, then ASSERT().
  
  @param[in]  Guid          The pointer to a 128-bit unique value that 
                            designates which namespace to set a value from.
  @param[in]  TokenNumber   The PCD token number to set a current value for.
  @param[in]  Value         The 8-bit value to set.

  @return Return the value been set.

**/
UINT8
EFIAPI
LibPcdSetEx8 (
  IN CONST GUID        *Guid,
  IN UINTN             TokenNumber,
  IN UINT8             Value
  )
{
  EFI_STATUS Status;

  ASSERT (Guid != NULL);

  Status = mPiPcd->Set8 (Guid, TokenNumber, Value);

  ASSERT_EFI_ERROR (Status);

  return Value;
}



/**
  This function provides a means by which to set a value for a given PCD token.
  
  Sets the 16-bit value for the token specified by TokenNumber and 
  Guid to the value specified by Value. Value is returned.
  
  If Guid is NULL, then ASSERT().
  
  @param[in]  Guid          The pointer to a 128-bit unique value that 
                            designates which namespace to set a value from.
  @param[in]  TokenNumber   The PCD token number to set a current value for.
  @param[in]  Value         The 16-bit value to set.

  @return Return the value been set.

**/
UINT16
EFIAPI
LibPcdSetEx16 (
  IN CONST GUID        *Guid,
  IN UINTN             TokenNumber,
  IN UINT16            Value
  )
{
  EFI_STATUS Status;

  ASSERT (Guid != NULL);

  Status = mPiPcd->Set16 (Guid, TokenNumber, Value);

  ASSERT_EFI_ERROR (Status);

  return Value;
}



/**
  This function provides a means by which to set a value for a given PCD token.
  
  Sets the 32-bit value for the token specified by TokenNumber and 
  Guid to the value specified by Value. Value is returned.
  
  If Guid is NULL, then ASSERT().
  
  @param[in]  Guid          The pointer to a 128-bit unique value that 
                            designates which namespace to set a value from.
  @param[in]  TokenNumber   The PCD token number to set a current value for.
  @param[in]  Value         The 32-bit value to set.

  @return Return the value been set.

**/
UINT32
EFIAPI
LibPcdSetEx32 (
  IN CONST GUID        *Guid,
  IN UINTN             TokenNumber,
  IN UINT32            Value
  )
{
  EFI_STATUS Status;

  ASSERT (Guid != NULL);

  Status = mPiPcd->Set32 (Guid, TokenNumber, Value);

  ASSERT_EFI_ERROR (Status);

  return Value;
}



/**
  This function provides a means by which to set a value for a given PCD token.
  
  Sets the 64-bit value for the token specified by TokenNumber and 
  Guid to the value specified by Value. Value is returned.
  If Guid is NULL, then ASSERT().
  
  @param[in]  Guid          The pointer to a 128-bit unique value that 
                            designates which namespace to set a value from.
  @param[in]  TokenNumber   The PCD token number to set a current value for.
  @param[in]  Value         The 64-bit value to set.

  @return Return the value been set.

**/
UINT64
EFIAPI
LibPcdSetEx64 (
  IN CONST GUID        *Guid,
  IN UINTN             TokenNumber,
  IN UINT64            Value
  )
{
  EFI_STATUS Status;

  ASSERT (Guid != NULL);

  Status = mPiPcd->Set64 (Guid, TokenNumber, Value);

  ASSERT_EFI_ERROR (Status);

  return Value;
}



/**
  This function provides a means by which to set a value for a given PCD token.
  
  Sets a buffer for the token specified by TokenNumber to the value specified by 
  Buffer and SizeOfBuffer.  Buffer is returned.  If SizeOfBuffer is greater than 
  the maximum size support by TokenNumber, then set SizeOfBuffer to the maximum size 
  supported by TokenNumber and return NULL to indicate that the set operation 
  was not actually performed. 
  
  If Guid is NULL, then ASSERT().
  If SizeOfBuffer is NULL, then ASSERT().
  If SizeOfBuffer > 0 and Buffer is NULL, then ASSERT().
  
  @param[in]  Guid              The pointer to a 128-bit unique value that 
                                designates which namespace to set a value from.
  @param[in]  TokenNumber       The PCD token number to set a current value for.
  @param[in, out] SizeOfBuffer  The size, in bytes, of Buffer.
  @param[in]  Buffer            A pointer to the buffer to set.

  @return Return the pinter to the buffer been set.

**/
VOID *
EFIAPI
LibPcdSetExPtr (
  IN      CONST GUID        *Guid,
  IN      UINTN             TokenNumber,
  IN OUT  UINTN             *SizeOfBuffer,
  IN      VOID              *Buffer
  )
{
  EFI_STATUS  Status;

  ASSERT (Guid != NULL);

  ASSERT (SizeOfBuffer != NULL);

  if (*SizeOfBuffer > 0) {
    ASSERT (Buffer != NULL);
  }

  Status = mPiPcd->SetPtr (Guid, TokenNumber, SizeOfBuffer, Buffer);

  if (EFI_ERROR (Status)) {
    return NULL;
  }

  return Buffer;
}



/**
  This function provides a means by which to set a value for a given PCD token.
  
  Sets the Boolean value for the token specified by TokenNumber and 
  Guid to the value specified by Value. Value is returned.
  
  If Guid is NULL, then ASSERT().
  
  @param[in]  Guid          The pointer to a 128-bit unique value that 
                            designates which namespace to set a value from.
  @param[in]  TokenNumber   The PCD token number to set a current value for.
  @param[in]  Value         The Boolean value to set.

  @return Return the value been set.

**/
BOOLEAN
EFIAPI
LibPcdSetExBool (
  IN CONST GUID        *Guid,
  IN UINTN             TokenNumber,
  IN BOOLEAN           Value
  )
{
  EFI_STATUS Status;

  ASSERT (Guid != NULL);

  Status = mPiPcd->SetBool (Guid, TokenNumber, Value);

  ASSERT_EFI_ERROR (Status);

  return Value;
}



/**
  Set up a notification function that is called when a specified token is set.
  
  When the token specified by TokenNumber and Guid is set, 
  then notification function specified by NotificationFunction is called.  
  If Guid is NULL, then the default token space is used.
  If NotificationFunction is NULL, then ASSERT().

  @param[in]  Guid                  The pointer to a 128-bit unique value that designates which 
                                    namespace to set a value from.  If NULL, then the default 
                                    token space is used.
  @param[in]  TokenNumber           The PCD token number to monitor.
  @param[in]  NotificationFunction  The function to call when the token 
                                    specified by Guid and TokenNumber is set.

**/
VOID
EFIAPI
LibPcdCallbackOnSet (
  IN CONST GUID               *Guid,       OPTIONAL
  IN UINTN                    TokenNumber,
  IN PCD_CALLBACK             NotificationFunction
  )
{
  EFI_STATUS Status;

  ASSERT (NotificationFunction != NULL);

  Status = mPiPcd->CallbackOnSet (Guid, TokenNumber, (EFI_PCD_PROTOCOL_CALLBACK) NotificationFunction);

  ASSERT_EFI_ERROR (Status);

  return;
}



/**
  Disable a notification function that was established with LibPcdCallbackonSet().
  
  Disable a notification function that was previously established with LibPcdCallbackOnSet().
  If NotificationFunction is NULL, then ASSERT().
  If LibPcdCallbackOnSet() was not previously called with Guid, TokenNumber, 
  and NotificationFunction, then ASSERT().
  
  @param[in]  Guid                 Specify the GUID token space.
  @param[in]  TokenNumber          Specify the token number.
  @param[in]  NotificationFunction The callback function to be unregistered.

**/
VOID
EFIAPI
LibPcdCancelCallback (
  IN CONST GUID               *Guid,       OPTIONAL
  IN UINTN                    TokenNumber,
  IN PCD_CALLBACK             NotificationFunction
  )
{
  EFI_STATUS Status;

  ASSERT (NotificationFunction != NULL);
    
  Status = mPiPcd->CancelCallback (Guid, TokenNumber, (EFI_PCD_PROTOCOL_CALLBACK) NotificationFunction);

  ASSERT_EFI_ERROR (Status);

  return;
}



/**
  Retrieves the next token in a token space.
  
  Retrieves the next PCD token number from the token space specified by Guid.  
  If Guid is NULL, then the default token space is used.  If TokenNumber is 0, 
  then the first token number is returned.  Otherwise, the token number that 
  follows TokenNumber in the token space is returned.  If TokenNumber is the last 
  token number in the token space, then 0 is returned.  
  
  If TokenNumber is not 0 and is not in the token space specified by Guid, then ASSERT().

  @param[in]  Guid        The pointer to a 128-bit unique value that designates which namespace 
                          to set a value from.  If NULL, then the default token space is used.
  @param[in]  TokenNumber The previous PCD token number.  If 0, then retrieves the first PCD 
                          token number.

  @return The next valid token number.

**/
UINTN           
EFIAPI
LibPcdGetNextToken (
  IN CONST GUID               *Guid,       OPTIONAL
  IN UINTN                    TokenNumber
  )
{
  EFI_STATUS Status;

  Status = mPiPcd->GetNextToken (Guid, &TokenNumber);

  ASSERT_EFI_ERROR (Status);

  return TokenNumber;
}



/**
  Used to retrieve the list of available PCD token space GUIDs.
  
  Returns the PCD token space GUID that follows TokenSpaceGuid in the list of token spaces
  in the platform.
  If TokenSpaceGuid is NULL, then a pointer to the first PCD token spaces returned.
  If TokenSpaceGuid is the last PCD token space GUID in the list, then NULL is returned.
  
  @param  TokenSpaceGuid  The pointer to the a PCD token space GUID

  @return The next valid token namespace.

**/
GUID *
EFIAPI
LibPcdGetNextTokenSpace (
  IN CONST GUID  *TokenSpaceGuid
  )
{
  EFI_STATUS Status;

  Status = mPiPcd->GetNextTokenSpace (&TokenSpaceGuid);

  ASSERT_EFI_ERROR (Status);

  return (GUID *) TokenSpaceGuid;
}


/**
  Sets a value of a patchable PCD entry that is type pointer.
  
  Sets the PCD entry specified by PatchVariable to the value specified by Buffer 
  and SizeOfBuffer.  Buffer is returned.  If SizeOfBuffer is greater than 
  MaximumDatumSize, then set SizeOfBuffer to MaximumDatumSize and return 
  NULL to indicate that the set operation was not actually performed.  
  If SizeOfBuffer is set to MAX_ADDRESS, then SizeOfBuffer must be set to 
  MaximumDatumSize and NULL must be returned.
  
  If PatchVariable is NULL, then ASSERT().
  If SizeOfBuffer is NULL, then ASSERT().
  If SizeOfBuffer > 0 and Buffer is NULL, then ASSERT().

  @param[in] PatchVariable      A pointer to the global variable in a module that is 
                                the target of the set operation.
  @param[in] MaximumDatumSize   The maximum size allowed for the PCD entry specified by PatchVariable.
  @param[in, out] SizeOfBuffer  A pointer to the size, in bytes, of Buffer.
  @param[in] Buffer             A pointer to the buffer to used to set the target variable.
  
  @return Return the pointer to the buffer been set.

**/
VOID *
EFIAPI
LibPatchPcdSetPtr (
  IN        VOID        *PatchVariable,
  IN        UINTN       MaximumDatumSize,
  IN OUT    UINTN       *SizeOfBuffer,
  IN CONST  VOID        *Buffer
  )
{
  ASSERT (PatchVariable != NULL);
  ASSERT (SizeOfBuffer  != NULL);
  
  if (*SizeOfBuffer > 0) {
    ASSERT (Buffer != NULL);
  }

  if ((*SizeOfBuffer > MaximumDatumSize) ||
      (*SizeOfBuffer == MAX_ADDRESS)) {
    *SizeOfBuffer = MaximumDatumSize;
    return NULL;
  }
    
  CopyMem (PatchVariable, Buffer, *SizeOfBuffer);
  
  return (VOID *) Buffer;
}