audk/DuetPkg/BootSector/Mbr.S

259 lines
10 KiB
ArmAsm
Raw Normal View History

#------------------------------------------------------------------------------
#*
#* Copyright 2006 - 2007, Intel Corporation
#* All rights reserved. This program and the accompanying materials
#* are licensed and made available under the terms and conditions of the BSD License
#* which accompanies this distribution. The full text of the license may be found at
#* http://opensource.org/licenses/bsd-license.php
#*
#* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
#* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#*
#* Mbr.asm
#*
#* Abstract:
#*
#------------------------------------------------------------------------------
.equ BLOCK_SIZE, 0x0200
.equ BLOCK_MASK, 0x01ff
.equ BLOCK_SHIFT, 9
# ****************************************************************************
# Code loaded by BIOS at 0x0000:0x7C00
# ****************************************************************************
.org 0x0
Start:
# ****************************************************************************
# Start Print
# ****************************************************************************
movw $0xb800, %ax
movw %ax, %es
movw $0x7c0, %ax
movw %ax, %ds
leaw %cs:StartString, %si
movw $10, %cx
movw $160, %di
rep
movsw
# ****************************************************************************
# Print over
# ****************************************************************************
# ****************************************************************************
# Initialize segment registers and copy code at 0x0000:0x7c00 to 0x0000:0x0600
# ****************************************************************************
xorw %ax, %ax # AX = 0x0000
movw $0x7c00, %bx # BX = 0x7C00
movw $0x600, %bp # BP = 0x0600
movw RelocatedStart, %si # SI = Offset(RelocatedStart)
movw $0x200, %cx # CX = 0x0200
subw %si, %cx # CS = 0x0200 - Offset(RelocatedStart)
leaw (%bp,%si,), %di # DI = 0x0600 + Offset(RelocatedStart)
leaw (%bx,%si,), %si # BX = 0x7C00 + Offset(RelocatedStart)
movw %ax, %ss # SS = 0x0000
movw %bx, %sp # SP = 0x7C00
movw %ax, %es # ES = 0x0000
movw %ax, %ds # DS = 0x0000
pushw %ax # PUSH 0x0000
pushw %di # PUSH 0x0600 + Offset(RelocatedStart)
cld # Clear the direction flag
rep
movsb # Copy 0x0200 bytes from 0x7C00 to 0x0600
retl # JMP 0x0000:0x0600 + Offset(RelocatedStart)
# ****************************************************************************
# Code relocated to 0x0000:0x0600
# ****************************************************************************
RelocatedStart:
# ****************************************************************************
# Get Driver Parameters to 0x0000:0x7BFC
# ****************************************************************************
xorw %ax, %ax # AX = 0
movw %ax, %ss # SS = 0
addw $0x1000, %ax
movw %ax, %ds
movw $0x7c00, %sp # SP = 0x7c00
movw %sp, %bp # BP = 0x7c00
movb $8, %ah # AH = 8 - Get Drive Parameters Function
movb %dl, PhysicalDrive(%bp) # BBS defines that BIOS would pass the booting driver number to the loader through DL
int $0x13 # Get Drive Parameters
xorw %ax, %ax # AX = 0
movb %dh, %al # AL = DH
incb %al # MaxHead = AL + 1
pushw %ax # 0000:7bfe = MaxHead
movb %cl, %al # AL = CL
andb $0x3f, %al # MaxSector = AL & 0x3f
pushw %ax # 0000:7bfc = MaxSector
# ****************************************************************************
# Read Target DBR from hard disk to 0x0000:0x7C00
# ****************************************************************************
xorw %ax, %ax
movb MbrPartitionIndicator(%bp), %al # AX = MbrPartitionIndex
cmpb $0xff, %al # 0xFF means do legacy MBR boot
jnz EfiDbr
LegacyMbr:
movl $0x0000600, %eax # Assume LegacyMBR is backuped in Sector 6
jmp StartReadTo7C00 # EAX = Header/Sector/Tracker/Zero
EfiDbr:
cmpb $4, %al # MbrPartitionIndex should < 4
jae BadDbr
shlw $4, %ax # AX = MBREntrySize * Index
addw $0x1be, %ax # AX = MBREntryOffset
movw %ax, %di # DI = MBREntryOffset
# Here we don't use the C/H/S information provided by Partition table
# but calculate C/H/S from LBA ourselves
# Ci: Cylinder number
# Hi: Header number
# Si: Sector number
movl %es:8(%bp,%di,), %eax # Start LBA
movl %eax, %edx
shrl $16, %edx # DX:AX = Start LBA
# = Ci * (H * S) + Hi * S + (Si - 1)
# Calculate C/H/S according to LBA
movw $0x7bfa, %bp
divw 2(%bp) # AX = Hi + H*Ci
# DX = Si - 1
incw %dx # DX = Si
pushw %dx # 0000:7bfa = Si <----
xorw %dx, %dx # DX:AX = Hi + H*Ci
divw 4(%bp) # AX = Ci <----
# DX = Hi <----
StartReadTo7C00:
movb (%bp), %cl # Si
movb %al, %ch # Ci[0-7]
orb %ah, %cl # Ci[8,9]
movw $0x7c00, %bx # ES:BX = 0000:7C00h
movb $0x2, %ah # Function 02h
movb $1, %al # 1 Sector
movb %dl, %dh # Hi
movw $0x600, %bp
movb PhysicalDrive(%bp), %dl # Drive number
int $0x13
jc BadDbr
# ****************************************************************************
# Transfer control to BootSector - Jump to 0x0000:0x7C00
# ****************************************************************************
xorw %ax, %ax
pushw %ax # PUSH 0x0000 - Segment
movw $0x7c00, %di
pushw %di # PUSH 0x7C00 - Offset
retl # JMP 0x0000:0x7C00
# ****************************************************************************
# ERROR Condition:
# ****************************************************************************
BadDbr:
pushw %ax
movw $0xb800, %ax
movw %ax, %es
movw $0x60, %ax
movw %ax, %ds
leaw %cs:ErrorString, %si
movw $320, %di
popw %ax
call A2C
movb %ah, 16(%si)
movb %al, 18(%si)
movw $10, %cx
rep
movsw
Halt:
jmp Halt
StartString:
.byte 'M', 0x0c, 'B', 0x0c, 'R', 0x0c, ' ', 0x0c, 'S', 0x0c, 't', 0x0c, 'a', 0x0c, 'r', 0x0c, 't', 0x0c, '!', 0x0c
ErrorString:
.byte 'M', 0x0c, 'B', 0x0c, 'R', 0x0c, ' ', 0x0c, 'E', 0x0c, 'r', 0x0c, 'r', 0x0c, ':', 0x0c, '?', 0x0c, '?', 0x0c
# ****************************************************************************
# A2C - convert Ascii code stored in AH to character stored in AX
# ****************************************************************************
A2C:
movb %ah, %al
shrb $4, %ah
andb $0xF, %al
addb '0', %ah
addb '0', %al
cmpb '9', %ah
jle A2C_L1
addb $7, %ah
A2C_L1:
cmpb '9', %al
jle A2C_L2
addb $7, %al
A2C_L2:
ret
# ****************************************************************************
# PhysicalDrive - Used to indicate which disk to be boot
# Can be patched by tool
# ****************************************************************************
.org 0x01B6
PhysicalDrive: .byte 0x80
# ****************************************************************************
# MbrPartitionIndicator - Used to indicate which MBR partition to be boot
# Can be patched by tool
# OxFF means boot to legacy MBR. (LBA OFFSET 6)
# ****************************************************************************
.org 0x01B7
MbrPartitionIndicator: .byte 0
# ****************************************************************************
# Unique MBR signature
# ****************************************************************************
.org 0x01B8
.ascii "DUET"
# ****************************************************************************
# Unknown
# ****************************************************************************
.org 0x01BC
.word 0
# ****************************************************************************
# MBR Entry - To be patched
# ****************************************************************************
.org 0x01BE
.long 0,0,0,0
.org 0x01CE
.long 0,0,0,0
.org 0x01DE
.long 0,0,0,0
.org 0x01EE
.long 0,0,0,0
# ****************************************************************************
# Sector Signature
# ****************************************************************************
.org 0x01FE
SectorSignature:
.word 0xaa55 # Boot Sector Signature