tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/ArmVirtPkg/ArmVirtKvmTool.dsc

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

393 lines
15 KiB
Plaintext
Raw Normal View History

ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
# @file
# Workspace file for KVMTool virtual platform.
#
ArmVirtPkg: Define variables for emulating runtime variables Kvmtool allows guest VMs to be launched with or without a CFI flash device. When the kvmtool option '--flash <flash filename>' is used to launch a guest VM a CFI flash device maps the flash file that was specified at the command line. The NorFlash driver uses this flash as the variable storage backend. However, when the above option is not specified, a CFI flash device is not present. In such cases, the firmware can fallback to use emulated runtime variables (which uses the VMs DRAM as the storage backend). Therefore, define the PCD PcdEmuVariableNvModeEnable required to enable the emulated runtime variable support, but do not enable it by default. The firmware is expected to dynamically discover if the CFI flash is present and subsequently enable NorFlash or emulate the runtime variables. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2023-05-12 12:14:04 +02:00
# Copyright (c) 2018 - 2023, Arm Limited. All rights reserved.
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
#
################################################################################
#
# Defines Section - statements that will be processed to create a Makefile.
#
################################################################################
[Defines]
PLATFORM_NAME = ArmVirtKvmTool
PLATFORM_GUID = 4CB2C61E-FA32-4130-8E37-54ABC71A1A43
PLATFORM_VERSION = 0.1
DSC_SPECIFICATION = 0x0001001B
!ifdef $(EDK2_OUT_DIR)
OUTPUT_DIRECTORY = $(EDK2_OUT_DIR)
!else
OUTPUT_DIRECTORY = Build/ArmVirtKvmTool-$(ARCH)
!endif
SUPPORTED_ARCHITECTURES = AARCH64|ARM
BUILD_TARGETS = DEBUG|RELEASE
SKUID_IDENTIFIER = DEFAULT
FLASH_DEFINITION = ArmVirtPkg/ArmVirtKvmTool.fdf
ArmVirtPkg/Kvmtool: Enable Acpiview Acpiview is a command line tool allowing to display, dump, or check installed ACPI tables. Add a 'ACPIVIEW_ENABLE' switch to enable it on an ArmVirt platform. The switch is set for the ArmVirtKvmTool platform. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2021-06-04 18:43:37 +02:00
[Defines.AARCH64]
DEFINE ACPIVIEW_ENABLE = TRUE
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
!include ArmVirtPkg/ArmVirt.dsc.inc
ArmVirtPkg/Kvmtool: Enable ACPI support A Configuration Manager that uses the Dynamic Tables framework to generate ACPI tables for Kvmtool Guests has been provided. This Configuration Manager uses the FdtHwInfoParser module to parse the Kvmtool Device Tree and generate the required Configuration Manager objects for generating the ACPI tables. Therefore, enable ACPI table generation for Kvmtool. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3742 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2021-04-20 14:53:10 +02:00
!if $(ARCH) == AARCH64
!include DynamicTablesPkg/DynamicTables.dsc.inc
!endif
ArmVirtPkg: Consume MdeLibs.dsc.inc for RegisterFilterLib REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3246 MdeLibs.dsc.inc was added for some basic/default library instances provided by MdePkg and RegisterFilterLibNull Library was also added into it as the first version of MdeLibs.dsc.inc. So update platform dsc to consume MdeLibs.dsc.inc for RegisterFilterLibNull which will be consumed by IoLib and BaseLib. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Leif Lindholm <leif@nuviainc.com> Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2021-03-12 06:13:55 +01:00
!include MdePkg/MdeLibs.dsc.inc
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
[LibraryClasses.common]
ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
# Virtio Support
VirtioLib|OvmfPkg/Library/VirtioLib/VirtioLib.inf
VirtioMmioDeviceLib|OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceLib.inf
ArmPlatformLib|ArmPlatformPkg/Library/ArmPlatformLibNull/ArmPlatformLibNull.inf
ArmVirtMemInfoLib|ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf
TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
ArmVirtPkg/ArmVirtKvmTool: Migrate to OVMF's VirtNorFlashDxe Migrate to the virt specific NOR flash driver as the ArmPlatformPkg is going away. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
2022-10-24 18:51:43 +02:00
VirtNorFlashPlatformLib|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
# BDS Libraries
UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
PlatformBootManagerLib|ArmPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
BootLogoLib|MdeModulePkg/Library/BootLogoLib/BootLogoLib.inf
CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf
FrameBufferBltLib|MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf
FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
ArmVirtPkg/FdtPciPcdProducerLib: Relocate PciPcdProducerLib to OvmfPkg Relocate PciPcdProducerLib to OvmfPkg/Fdt, this library is leverage by both ARM and RISC-V archs. Add OvmfPkg/Fdt maintainers in Maintainers.txt Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Leif Lindholm <leif@nuviainc.com> Cc: Sami Mujawar <sami.mujawar@arm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Cc: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
2021-10-11 15:27:00 +02:00
PciPcdProducerLib|OvmfPkg/Fdt/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf
ArmVirtPkg/FdtPciHostBridgeLib: Relocate FdtPciHostBridgeLib to OvmfPkg/Fdt Relocate FdtPciHostBridgeLib to OvmfPkg/Fdt, this library is leverage by both ARM and RISC-V archs. Also use PcdPciMmio32Translation and PcdPciMmio64Translation PCDs provided by MdePkg instead of ArmPkg. Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Leif Lindholm <leif@nuviainc.com> Cc: Sami Mujawar <sami.mujawar@arm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Cc: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jiewen Yao <jiewen.yao@intel.com>
2021-10-11 15:36:28 +02:00
PciHostBridgeLib|OvmfPkg/Fdt/FdtPciHostBridgeLib/FdtPciHostBridgeLib.inf
ArmVirtPkg: Enable PCIe support for Kvmtool PCIe support has been added to the Kvmtool virtual machine manager. Therefore, enable PCIe support for Kvmtool firmware. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
2021-06-15 17:21:28 +02:00
PciHostBridgeUtilityLib|ArmVirtPkg/Library/ArmVirtPciHostBridgeUtilityLib/ArmVirtPciHostBridgeUtilityLib.inf
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
PlatformPeiLib|ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
PlatformHookLib|ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
ArmVirtPkg/Kvmtool: Enable ACPI support A Configuration Manager that uses the Dynamic Tables framework to generate ACPI tables for Kvmtool Guests has been provided. This Configuration Manager uses the FdtHwInfoParser module to parse the Kvmtool Device Tree and generate the required Configuration Manager objects for generating the ACPI tables. Therefore, enable ACPI table generation for Kvmtool. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3742 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2021-04-20 14:53:10 +02:00
HwInfoParserLib|DynamicTablesPkg/Library/FdtHwInfoParserLib/FdtHwInfoParserLib.inf
DynamicPlatRepoLib|DynamicTablesPkg/Library/Common/DynamicPlatRepoLib/DynamicPlatRepoLib.inf
ArmVirtPkg: Kvmtool: Add RNG support using Arm TRNG interface Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668) The EFI_RNG_PROTOCOL published by RngDxe has been updated to implement the EFI_RNG_ALGORITHM_RAW using the Arm TRNG interface to provide access to entropy. Therefore, enable EFI_RNG_PROTOCOL for the Kvmtool guest/virtual firmware. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2022-10-28 17:32:59 +02:00
ArmMonitorLib|ArmPkg/Library/ArmMonitorLib/ArmMonitorLib.inf
ArmTrngLib|ArmPkg/Library/ArmTrngLib/ArmTrngLib.inf
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
[LibraryClasses.common.SEC, LibraryClasses.common.PEI_CORE, LibraryClasses.common.PEIM]
PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
PlatformHookLib|ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
[LibraryClasses.common.UEFI_DRIVER]
UefiScsiLib|MdePkg/Library/UefiScsiLib/UefiScsiLib.inf
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
#
# We need to avoid jump tables in SEC and BASE modules, so that the PE/COFF
# self-relocation code itself is guaranteed to be position independent.
#
GCC:*_*_*_CC_XIPFLAGS = -fno-jump-tables
################################################################################
#
# Pcd Section - list of all EDK II PCD Entries defined by this Platform
#
################################################################################
[PcdsFeatureFlag.common]
## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
# It could be set FALSE to save size.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|FALSE
# Use MMIO for accessing RTC controller registers.
gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio|TRUE
ArmVirtPkg: Kvmtool: Add RNG support using Arm TRNG interface Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668) The EFI_RNG_PROTOCOL published by RngDxe has been updated to implement the EFI_RNG_ALGORITHM_RAW using the Arm TRNG interface to provide access to entropy. Therefore, enable EFI_RNG_PROTOCOL for the Kvmtool guest/virtual firmware. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2022-10-28 17:32:59 +02:00
gArmTokenSpaceGuid.PcdMonitorConduitHvc|TRUE
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
[PcdsFixedAtBuild.common]
gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000000F
gArmPlatformTokenSpaceGuid.PcdCoreCount|1
!if $(ARCH) == AARCH64
gArmTokenSpaceGuid.PcdVFPEnabled|1
!endif
gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x2000
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x2800
# Size of the region used by UEFI in permanent memory (Reserved 64MB)
gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x04000000
#
# TTY Terminal Type
# 0-PCANSI, 1-VT100, 2-VT00+, 3-UTF8, 4-TTYTERM
gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4
#
# ARM Virtual Architectural Timer -- fetch frequency from KVM
#
gArmTokenSpaceGuid.PcdArmArchTimerFreqInHz|0
# Use MMIO for accessing Serial port registers.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|TRUE
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}
gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
#
# The maximum physical I/O addressability of the processor, set with
# BuildCpuHob().
#
gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16
[PcdsPatchableInModule.common]
#
# This will be overridden in the code
#
gArmTokenSpaceGuid.PcdSystemMemoryBase|0x0
gArmTokenSpaceGuid.PcdSystemMemorySize|0x0
#
# The device tree base address is handed off by kvmtool.
# We are booting from RAM using the Linux kernel boot protocol,
# x0 will point to the DTB image in memory.
#
gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x0
ArmVirtPkg/ArmVirtKvmTool: wire up configurable timeout Use the correct PCD type for PcdPlatformBootTimeOut so it gets wired up to the Timeout EFI variable automatically, which is how the boot manager stores the timeout preference. Note that this changes the default to 5 seconds, which appears to be common across platforms. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
2022-02-01 19:00:47 +01:00
[PcdsDynamicHii]
gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|L"Timeout"|gEfiGlobalVariableGuid|0x0|5
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
ArmVirtPkg/ArmVirtKvmTool: wire up configurable timeout Use the correct PCD type for PcdPlatformBootTimeOut so it gets wired up to the Timeout EFI variable automatically, which is how the boot manager stores the timeout preference. Note that this changes the default to 5 seconds, which appears to be common across platforms. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
2022-02-01 19:00:47 +01:00
[PcdsDynamicDefault.common]
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum|0x0
gArmTokenSpaceGuid.PcdArmArchTimerIntrNum|0x0
gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum|0x0
gArmTokenSpaceGuid.PcdArmArchTimerHypIntrNum|0x0
ArmVirtPkg: handle virtual EL2 timer in DT FEAT_VHE, introduced in ARMv8.1, adds a virtual EL2 timer. However, this library verifies that exactly 3 or 4 12-byte timer interrupts are provided in input DT, ASSERTing when the new timer is added. Change the assert to >= 36. Extend the current logic, also initializing PcdArmArchTimerHypVirtIntrNum if 5 interrupts are provided. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Reported-by: Peter Maydell <peter.maydell@linaro.org> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-19 12:20:25 +02:00
gArmTokenSpaceGuid.PcdArmArchTimerHypVirtIntrNum|0x0
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
#
# ARM General Interrupt Controller
#
gArmTokenSpaceGuid.PcdGicDistributorBase|0x0
gArmTokenSpaceGuid.PcdGicRedistributorsBase|0x0
gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase|0x0
ArmVirtPkg: Enable PCIe support for Kvmtool PCIe support has been added to the Kvmtool virtual machine manager. Therefore, enable PCIe support for Kvmtool firmware. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
2021-06-15 17:21:28 +02:00
#
# PCI settings
#
gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|TRUE
# set PcdPciExpressBaseAddress to MAX_UINT64, which signifies that this
# PCD and PcdPciDisableBusEnumeration above have not been assigned yet
gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress|0xFFFFFFFFFFFFFFFF
ArmPkg: Use PcdPciIoTranslation PCD from MdePkg PcdPciIoTranslation PCD is relocated to MdePkg and leveraged by both ARM and RISC-V arch. This patch removes the one from ArmPkg and address the corresponding changes required for other modules under ArmVirtPkg. Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Leif Lindholm <leif@nuviainc.com> Cc: Sami Mujawar <sami.mujawar@arm.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Cc: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2021-10-11 15:26:23 +02:00
gEfiMdePkgTokenSpaceGuid.PcdPciIoTranslation|0x0
ArmVirtPkg: Enable PCIe support for Kvmtool PCIe support has been added to the Kvmtool virtual machine manager. Therefore, enable PCIe support for Kvmtool firmware. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
2021-06-15 17:21:28 +02:00
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
#
# Set video resolution for boot options and for text setup.
# PlatformDxe can set the former at runtime.
#
gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800
gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|640
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|480
# Setup Flash storage variables
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x40000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x40000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x40000
ArmVirtPkg: Define variables for emulating runtime variables Kvmtool allows guest VMs to be launched with or without a CFI flash device. When the kvmtool option '--flash <flash filename>' is used to launch a guest VM a CFI flash device maps the flash file that was specified at the command line. The NorFlash driver uses this flash as the variable storage backend. However, when the above option is not specified, a CFI flash device is not present. In such cases, the firmware can fallback to use emulated runtime variables (which uses the VMs DRAM as the storage backend). Therefore, define the PCD PcdEmuVariableNvModeEnable required to enable the emulated runtime variable support, but do not enable it by default. The firmware is expected to dynamically discover if the CFI flash is present and subsequently enable NorFlash or emulate the runtime variables. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2023-05-12 12:14:04 +02:00
# Define PCD for emulating Runtime Variable storage when
# CFI flash is absent.
gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvModeEnable|FALSE
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
## RTC Register address in MMIO space.
gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64|0x0
gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64|0x0
################################################################################
#
# Components Section - list of all EDK II Modules needed by this Platform
#
################################################################################
[Components.common]
#
# PEI Phase modules
#
ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf {
<LibraryClasses>
ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf
}
#
# DXE
#
MdeModulePkg/Core/Dxe/DxeMain.inf {
<LibraryClasses>
NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf
DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
}
MdeModulePkg/Universal/PCD/Dxe/Pcd.inf {
<LibraryClasses>
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
}
#
# Architectural Protocols
#
ArmPkg/Drivers/CpuDxe/CpuDxe.inf
MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
<LibraryClasses>
NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf
NULL|EmbeddedPkg/Library/NvVarStoreFormattedLib/NvVarStoreFormattedLib.inf
BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
}
MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf {
<LibraryClasses>
NULL|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
}
MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
MdeModulePkg/Universal/Metronome/Metronome.inf
PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf {
<LibraryClasses>
NULL|ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf
}
MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
ArmPkg/Drivers/TimerDxe/TimerDxe.inf {
<LibraryClasses>
NULL|ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.inf
}
ArmVirt: don't use unaligned CopyMem () on NOR flash Commit 789a72328553 reclassified the NOR flash region as EFI_MEMORY_WC in the OS visible EFI memory map, and dropped the explicit aligned CopyMem() implementation, in the assumption that EFI_MEMORY_WC will be honored by the OS, and that the region will be mapped in a way that tolerates misaligned accesseses. However, Linux today uses device attributes for all EFI MMIO regions, in spite of the memory type attributes, and so using misaligned accesses is never safe. So instead, switch to the generic CopyMem() implementation entirely, just like we already did for VariableRuntimeDxe. Fixes: 789a72328553 ("OvmfPkg/VirtNorFlashDxe: use EFI_MEMORY_WC and drop AlignedCopyMem()") Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2023-01-16 10:46:39 +01:00
OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf {
<LibraryClasses>
# don't use unaligned CopyMem () on the UEFI varstore NOR flash region
BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
}
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
#
# Platform Driver
#
ArmVirtPkg: Dispatch variable service if variable emulation is enabled The VariableRuntimeDxe links with NvVarStoreFormattedLib which is required to establish the dependency on OvmfPkg\VirtNorFlashDxe. The VirtNorFlashDxe installs the gEdkiiNvVarStoreFormattedGuid to indicate it has finished initialising the flash variable storage and that the variable service can be dispatched. However, the kvmtool guest firmware dynamically detects if CFI flash is absent and sets PcdEmuVariableNvModeEnable to TRUE indicating emulated runtime variable must be used. Therefore, in this scenario install the gEdkiiNvVarStoreFormattedGuid so that the variable service can be dispatched. Also link the NorFlashKvmtoolLib as a NULL library so that it can discover if the CFI flash is absent and setup the PCD PcdEmuVariableNvModeEnable. This is required in case the NorFlashDxe is not yet dispatched. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2023-05-12 10:54:34 +02:00
ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf {
<LibraryClasses>
NULL|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
}
ArmVirtPkg/VirtioFdtDxe: Relocate VirtioFdtDxe to OvmfPkg/Fdt Relocate VirtioFdtDxe to OvmfPkg/Fdt, this driver is leverage by both ARM and RISC-V archs. Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Leif Lindholm <leif@nuviainc.com> Cc: Sami Mujawar <sami.mujawar@arm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Cc: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jiewen Yao <jiewen.yao@intel.com>
2021-10-11 15:39:13 +02:00
OvmfPkg/Fdt/VirtioFdtDxe/VirtioFdtDxe.inf
ArmVirtPkg/FdtClintDxe: Move FdtClientDxe to EmbeddedPkg This is one of the series patches to restructure the location of modules under ArmVirtPkg for RiscVVirtPkg. RiscVVirtPkg leverage FDT Client protocol to parse FDT nodes. Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Leif Lindholm <leif@nuviainc.com> Cc: Sami Mujawar <sami.mujawar@arm.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Cc: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2021-10-11 15:24:08 +02:00
EmbeddedPkg/Drivers/FdtClientDxe/FdtClientDxe.inf
ArmVirtPkg/HighMemDxe: Relocate HighMemDxe to OvmfPkg Relocate HighMemDxe to OvmfPkg/Fdt, this library is leverage by both ARM and RISC-V archs. Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Leif Lindholm <leif@nuviainc.com> Cc: Sami Mujawar <sami.mujawar@arm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Cc: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
2021-10-11 15:27:33 +02:00
OvmfPkg/Fdt/HighMemDxe/HighMemDxe.inf
ArmVirtPkg: Support for kvmtool virtual platform Kvmtool is a virtual machine manager that enables hosting KVM guests. Kvmtool emulates certain devices like serial port, RTC, etc. essentially providing a virtual platform. This patch adds support for kvmtool virtual platform. Following is a brief description of the firmware implementation choices: - Serial Port: 16550 UART On some platforms the 16550 UART is interfaced using PCI. Therefore, the 16550 Serial port library is dependent on the PCI library. The 16550 UART driver checks the Device ID represented using the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo to determine if the UART is behind PCI. If the Device ID is 0xFF then the serial 16550 UART is not behind PCI. On Kvmtool the Serial 16550 UART is not behind PCI, and therefore a combination of BasePciLibPciExpress and BasePciExpressLib is used to satisfy the PCI library dependency. The PcdSerialPciDeviceInfo is also set to 0xFF to indicate that the Serial 16550 UART is not behind PCI. The PCD PcdSerialUseMmio is also set to TRUE to indicate MMIO accesses are required for the UART registers. Additionally two instances of PlatformHookLibs are provided EarlyFdt16550SerialPortHookLib and Fdt16550SerialPortHookLib to patch the PcdSerialRegisterBase so that BaseSerialPortLib16550 and retrieve the base address of the 16550 UART. - Dependency order for Flash FaultTolerantWriteDxe makes use of PCDs (e.g. PcdFlashNvStorageFtwSpareBase64 etc.), which in case of kvmtool will be evaluated based on the CFI flash base address read from the DT. These variables are populated in the NorFlashPlatformLib loaded by ArmVeNorFlashDxe. This results in a dependency issue with FaultTolerantWriteDxe. To resolve this make the NorFlashPlatformLib as a library dependency for FaultTolerantWriteDxe. - RTC Controller A separate patch updates the MC146818 RTC controller driver to support MMIO accesses. A KvmtoolRtcFdtClientLib has been introduced to extract the base addresses of the RTC controller from the platform device tree and map the RTC register space as Runtime Memory. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-10-02 23:14:05 +02:00
OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
OvmfPkg/VirtioNetDxe/VirtioNet.inf
OvmfPkg/VirtioRngDxe/VirtioRng.inf
#
# FAT filesystem + GPT/MBR partitioning + UDF filesystem
#
MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
FatPkg/EnhancedFatDxe/Fat.inf
MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf
#
# Bds
#
MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf {
<LibraryClasses>
DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
}
MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
MdeModulePkg/Logo/LogoDxe.inf
MdeModulePkg/Application/UiApp/UiApp.inf {
<LibraryClasses>
NULL|MdeModulePkg/Library/DeviceManagerUiLib/DeviceManagerUiLib.inf
NULL|MdeModulePkg/Library/BootManagerUiLib/BootManagerUiLib.inf
NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf
}
#
# SCSI Bus and Disk Driver
#
MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
ArmVirtPkg: Enable PCIe support for Kvmtool PCIe support has been added to the Kvmtool virtual machine manager. Therefore, enable PCIe support for Kvmtool firmware. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
2021-06-15 17:21:28 +02:00
#
# PCI support
#
ArmPkg/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf {
<LibraryClasses>
ArmVirtPkg/FdtPciPcdProducerLib: Relocate PciPcdProducerLib to OvmfPkg Relocate PciPcdProducerLib to OvmfPkg/Fdt, this library is leverage by both ARM and RISC-V archs. Add OvmfPkg/Fdt maintainers in Maintainers.txt Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Leif Lindholm <leif@nuviainc.com> Cc: Sami Mujawar <sami.mujawar@arm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Cc: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
2021-10-11 15:27:00 +02:00
NULL|OvmfPkg/Fdt/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
OvmfPkg/BaseCachingPciExpressLib: Migrate BaseCachingPciExpressLib Move BaseCachingPciExpressLib library from ArmVirtPkg to under OvmfPkg. RISC-V Virt platform can leverage the same library to access PCI Express registers through PCI Express base address set in PcdPciExpressBaseAddress and cached in a global variable. Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Cc: Sunil V L <sunilvl@ventanamicro.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Abner Chang <abner.chang@hpe.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2022-01-29 17:03:47 +01:00
NULL|OvmfPkg/Library/BaseCachingPciExpressLib/BaseCachingPciExpressLib.inf
ArmVirtPkg: Enable PCIe support for Kvmtool PCIe support has been added to the Kvmtool virtual machine manager. Therefore, enable PCIe support for Kvmtool firmware. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
2021-06-15 17:21:28 +02:00
}
MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf {
<LibraryClasses>
ArmVirtPkg/FdtPciPcdProducerLib: Relocate PciPcdProducerLib to OvmfPkg Relocate PciPcdProducerLib to OvmfPkg/Fdt, this library is leverage by both ARM and RISC-V archs. Add OvmfPkg/Fdt maintainers in Maintainers.txt Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Leif Lindholm <leif@nuviainc.com> Cc: Sami Mujawar <sami.mujawar@arm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Cc: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
2021-10-11 15:27:00 +02:00
NULL|OvmfPkg/Fdt/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
OvmfPkg/BaseCachingPciExpressLib: Migrate BaseCachingPciExpressLib Move BaseCachingPciExpressLib library from ArmVirtPkg to under OvmfPkg. RISC-V Virt platform can leverage the same library to access PCI Express registers through PCI Express base address set in PcdPciExpressBaseAddress and cached in a global variable. Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Cc: Sunil V L <sunilvl@ventanamicro.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Abner Chang <abner.chang@hpe.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2022-01-29 17:03:47 +01:00
NULL|OvmfPkg/Library/BaseCachingPciExpressLib/BaseCachingPciExpressLib.inf
ArmVirtPkg: Enable PCIe support for Kvmtool PCIe support has been added to the Kvmtool virtual machine manager. Therefore, enable PCIe support for Kvmtool firmware. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
2021-06-15 17:21:28 +02:00
}
MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf {
<LibraryClasses>
ArmVirtPkg/FdtPciPcdProducerLib: Relocate PciPcdProducerLib to OvmfPkg Relocate PciPcdProducerLib to OvmfPkg/Fdt, this library is leverage by both ARM and RISC-V archs. Add OvmfPkg/Fdt maintainers in Maintainers.txt Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Leif Lindholm <leif@nuviainc.com> Cc: Sami Mujawar <sami.mujawar@arm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Cc: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
2021-10-11 15:27:00 +02:00
NULL|OvmfPkg/Fdt/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
OvmfPkg/BaseCachingPciExpressLib: Migrate BaseCachingPciExpressLib Move BaseCachingPciExpressLib library from ArmVirtPkg to under OvmfPkg. RISC-V Virt platform can leverage the same library to access PCI Express registers through PCI Express base address set in PcdPciExpressBaseAddress and cached in a global variable. Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Cc: Sunil V L <sunilvl@ventanamicro.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Abner Chang <abner.chang@hpe.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2022-01-29 17:03:47 +01:00
NULL|OvmfPkg/Library/BaseCachingPciExpressLib/BaseCachingPciExpressLib.inf
ArmVirtPkg: Enable PCIe support for Kvmtool PCIe support has been added to the Kvmtool virtual machine manager. Therefore, enable PCIe support for Kvmtool firmware. Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
2021-06-15 17:21:28 +02:00
}
OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf
OvmfPkg/Virtio10Dxe/Virtio10.inf
ArmVirtPkg/Kvmtool: Enable ACPI support A Configuration Manager that uses the Dynamic Tables framework to generate ACPI tables for Kvmtool Guests has been provided. This Configuration Manager uses the FdtHwInfoParser module to parse the Kvmtool Device Tree and generate the required Configuration Manager objects for generating the ACPI tables. Therefore, enable ACPI table generation for Kvmtool. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3742 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2021-04-20 14:53:10 +02:00
ArmVirtPkg: Kvmtool: Add RNG support using Arm TRNG interface Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668) The EFI_RNG_PROTOCOL published by RngDxe has been updated to implement the EFI_RNG_ALGORITHM_RAW using the Arm TRNG interface to provide access to entropy. Therefore, enable EFI_RNG_PROTOCOL for the Kvmtool guest/virtual firmware. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2022-10-28 17:32:59 +02:00
#
# Rng Support
#
SecurityPkg/RandomNumberGenerator/RngDxe/RngDxe.inf
ArmVirtPkg/Kvmtool: Enable ACPI support A Configuration Manager that uses the Dynamic Tables framework to generate ACPI tables for Kvmtool Guests has been provided. This Configuration Manager uses the FdtHwInfoParser module to parse the Kvmtool Device Tree and generate the required Configuration Manager objects for generating the ACPI tables. Therefore, enable ACPI table generation for Kvmtool. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3742 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2021-04-20 14:53:10 +02:00
!if $(ARCH) == AARCH64
#
# ACPI Support
#
ArmVirtPkg/KvmtoolCfgMgrDxe/ConfigurationManagerDxe.inf
!endif