audk/IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciCommand.h

/** @file

Copyright (c) 2006, Intel Corporation                                                         
All rights reserved. This program and the accompanying materials                          
are licensed and made available under the terms and conditions of the BSD License         
which accompanies this distribution.  The full text of the license may be found at        
http://opensource.org/licenses/bsd-license.php                                            
                                                                                          
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

**/


#ifndef _EFI_PCI_COMMAND_H_
#define _EFI_PCI_COMMAND_H_

//
// The PCI Command register bits owned by PCI Bus driver.
//
// They should be cleared at the beginning. The other registers
// are owned by chipset, we should not touch them.
//
#define EFI_PCI_COMMAND_BITS_OWNED                          ( \
                EFI_PCI_COMMAND_IO_SPACE                    | \
                EFI_PCI_COMMAND_MEMORY_SPACE                | \
                EFI_PCI_COMMAND_BUS_MASTER                  | \
                EFI_PCI_COMMAND_MEMORY_WRITE_AND_INVALIDATE | \
                EFI_PCI_COMMAND_VGA_PALETTE_SNOOP           | \
                EFI_PCI_COMMAND_FAST_BACK_TO_BACK             \
                )

//
// The PCI Bridge Control register bits owned by PCI Bus driver.
// 
// They should be cleared at the beginning. The other registers
// are owned by chipset, we should not touch them.
//
#define EFI_PCI_BRIDGE_CONTROL_BITS_OWNED                   ( \
                EFI_PCI_BRIDGE_CONTROL_ISA                  | \
                EFI_PCI_BRIDGE_CONTROL_VGA                  | \
                EFI_PCI_BRIDGE_CONTROL_VGA_16               | \
                EFI_PCI_BRIDGE_CONTROL_FAST_BACK_TO_BACK      \
                )

//
// The PCCard Bridge Control register bits owned by PCI Bus driver.
// 
// They should be cleared at the beginning. The other registers
// are owned by chipset, we should not touch them.
//
#define EFI_PCCARD_BRIDGE_CONTROL_BITS_OWNED                ( \
                EFI_PCI_BRIDGE_CONTROL_ISA                  | \
                EFI_PCI_BRIDGE_CONTROL_VGA                  | \
                EFI_PCI_BRIDGE_CONTROL_FAST_BACK_TO_BACK      \
                )


#define EFI_GET_REGISTER      1
#define EFI_SET_REGISTER      2
#define EFI_ENABLE_REGISTER   3
#define EFI_DISABLE_REGISTER  4

/**
  Operate the PCI register via PciIo function interface.
  
  @param PciIoDevice    Pointer to instance of PCI_IO_DEVICE
  @param Command        Operator command
  @param Offset         The address within the PCI configuration space for the PCI controller.
  @param Operation      Type of Operation
  @param PtrCommand     Return buffer holding old PCI command, if operation is not EFI_SET_REGISTER
  
  @return status of PciIo operation
**/
EFI_STATUS
PciOperateRegister (
  IN  PCI_IO_DEVICE *PciIoDevice,
  IN  UINT16        Command,
  IN  UINT8         Offset,
  IN  UINT8         Operation,
  OUT UINT16        *PtrCommand
  );

/**
  check the cpability of this device supports
  
  @param PciIoDevice  Pointer to instance of PCI_IO_DEVICE
  
  @retval TRUE  Support
  @retval FALSE Not support.
**/
BOOLEAN
PciCapabilitySupport (
  IN PCI_IO_DEVICE  *PciIoDevice
  );

/**
  Locate cap reg.
  
  @param PciIoDevice         - A pointer to the PCI_IO_DEVICE.
  @param CapId               - The cap ID.
  @param Offset              - A pointer to the offset.
  @param NextRegBlock        - A pointer to the next block.
  
  @retval EFI_UNSUPPORTED  Pci device does not support
  @retval EFI_NOT_FOUND    Pci device support but can not find register block.
  @retval EFI_SUCCESS      Success to locate capability register block
**/
EFI_STATUS
LocateCapabilityRegBlock (
  IN PCI_IO_DEVICE  *PciIoDevice,
  IN UINT8          CapId,
  IN OUT UINT8      *Offset,
  OUT UINT8         *NextRegBlock OPTIONAL
  );


#define PciReadCommandRegister(a,b) \
        PciOperateRegister (a,0, PCI_COMMAND_OFFSET, EFI_GET_REGISTER, b)

#define PciSetCommandRegister(a,b) \
        PciOperateRegister (a,b, PCI_COMMAND_OFFSET, EFI_SET_REGISTER, NULL)
        
#define PciEnableCommandRegister(a,b) \
        PciOperateRegister (a,b, PCI_COMMAND_OFFSET, EFI_ENABLE_REGISTER, NULL)
        
#define PciDisableCommandRegister(a,b) \
        PciOperateRegister (a,b, PCI_COMMAND_OFFSET, EFI_DISABLE_REGISTER, NULL)

#define PciReadBridgeControlRegister(a,b) \
        PciOperateRegister (a,0, PCI_BRIDGE_CONTROL_REGISTER_OFFSET, EFI_GET_REGISTER, b)
        
#define PciSetBridgeControlRegister(a,b) \
        PciOperateRegister (a,b, PCI_BRIDGE_CONTROL_REGISTER_OFFSET, EFI_SET_REGISTER, NULL)

#define PciEnableBridgeControlRegister(a,b) \
        PciOperateRegister (a,b, PCI_BRIDGE_CONTROL_REGISTER_OFFSET, EFI_ENABLE_REGISTER, NULL)
        
#define PciDisableBridgeControlRegister(a,b) \
        PciOperateRegister (a,b, PCI_BRIDGE_CONTROL_REGISTER_OFFSET, EFI_DISABLE_REGISTER, NULL)

#endif