tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/ArmVirtPkg/ArmVirtQemu.dsc

381 lines
14 KiB
Plaintext
Raw Normal View History

ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
# Copyright (c) 2014, Linaro Limited. All rights reserved.
ArmVirtPkg: Cleanup redundant library class resolution of Variable modules SecurityPkg/VariableAuthenticated/Pei/VariablePei.inf doesn't consume BaseCryptLib directly or indirectly, cleanup it. SecurityPkg/VariableAuthenticated/Pei/VariablePei.inf { <LibraryClasses> BaseCryptLib|CryptoPkg/Library/BaseCryptLib/PeiCryptLib.inf } BaseCryptLib has been declared at [LibraryClasses.common.DXE_RUNTIME_DRIVER] section in ArmVirt.dsc.inc. OpensslLib has been declared at [LibraryClasses.common] section in ArmVirt.dsc.inc. So cleanup them. SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableRuntimeDxe.inf { <LibraryClasses> BaseCryptLib|CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf } Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17769 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01 05:10:27 +02:00
# Copyright (c) 2015, Intel Corporation. All rights reserved.
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#
################################################################################
#
# Defines Section - statements that will be processed to create a Makefile.
#
################################################################################
[Defines]
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
PLATFORM_NAME = ArmVirtQemu
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
PLATFORM_GUID = 37d7e986-f7e9-45c2-8067-e371421a626c
PLATFORM_VERSION = 0.1
DSC_SPECIFICATION = 0x00010005
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
OUTPUT_DIRECTORY = Build/ArmVirtQemu-$(ARCH)
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
SUPPORTED_ARCHITECTURES = AARCH64|ARM
BUILD_TARGETS = DEBUG|RELEASE
SKUID_IDENTIFIER = DEFAULT
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
FLASH_DEFINITION = ArmVirtPkg/ArmVirtQemu.fdf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
ArmVirtualizationPkg: Enable secure boot for ArmVirtualizationQemu This adds all the required modules and library dependencies so that the ArmVirtualizationQemu platform can be built with support for UEFI Secure Boot. This support consists of the OpenSSL crypto library (whose source needs to be downloaded separately), the authenticated variable store, and authentication of executables before launching them. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17356 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-07 17:22:31 +02:00
#
# Defines for default states. These can be changed on the command line.
# -D FLAG=VALUE
#
DEFINE SECURE_BOOT_ENABLE = FALSE
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
!include ArmVirtPkg/ArmVirt.dsc.inc
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
[LibraryClasses.AARCH64]
ArmLib|ArmPkg/Library/ArmLib/AArch64/AArch64Lib.inf
ArmCpuLib|ArmPkg/Drivers/ArmCpuLib/ArmCortexAEMv8Lib/ArmCortexAEMv8Lib.inf
[LibraryClasses.ARM]
ArmLib|ArmPkg/Library/ArmLib/ArmV7/ArmV7Lib.inf
ArmCpuLib|ArmPkg/Drivers/ArmCpuLib/ArmCortexA15Lib/ArmCortexA15Lib.inf
[LibraryClasses.common]
# Virtio Support
VirtioLib|OvmfPkg/Library/VirtioLib/VirtioLib.inf
VirtioMmioDeviceLib|OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceLib.inf
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
QemuFwCfgLib|ArmVirtPkg/Library/QemuFwCfgLib/QemuFwCfgLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
ArmPlatformLib|ArmVirtPkg/Library/ArmVirtPlatformLib/ArmVirtPlatformLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
ArmPlatformSysConfigLib|ArmPlatformPkg/Library/ArmPlatformSysConfigLibNull/ArmPlatformSysConfigLibNull.inf
TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
NorFlashPlatformLib|ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
ArmPlatformPkg/ArmVirtualizationPkg: Added support for Intel BDS Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16208 6f19259b-4bc3-4df7-8a09-765794883524
2014-10-13 12:55:38 +02:00
CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
GenericBdsLib|IntelFrameworkModulePkg/Library/GenericBdsLib/GenericBdsLib.inf
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
PlatformBdsLib|ArmVirtPkg/Library/PlatformIntelBdsLib/PlatformIntelBdsLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Added support for Intel BDS Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16208 6f19259b-4bc3-4df7-8a09-765794883524
2014-10-13 12:55:38 +02:00
CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf
ArmVirtualizationPkg: PlatformIntelBdsLib: adhere to QEMU's boot order We have all the required pieces in place. Let's call SetBootOrderFromQemu() in PlatformBdsPolicyBehavior(). We disable OFW-to-UEFI device path fragment translation for virtio-pci, and enable it only virtio-mmio at this time. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16576 6f19259b-4bc3-4df7-8a09-765794883524
2015-01-02 13:08:24 +01:00
QemuBootOrderLib|OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Added support for Intel BDS Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16208 6f19259b-4bc3-4df7-8a09-765794883524
2014-10-13 12:55:38 +02:00
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
[LibraryClasses.common.UEFI_DRIVER]
UefiScsiLib|MdePkg/Library/UefiScsiLib/UefiScsiLib.inf
[LibraryClasses.AARCH64.SEC]
ArmLib|ArmPkg/Library/ArmLib/AArch64/AArch64LibSec.inf
[LibraryClasses.ARM.SEC]
ArmLib|ArmPkg/Library/ArmLib/ArmV7/ArmV7LibSec.inf
[BuildOptions]
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
RVCT:*_*_ARM_PLATFORM_FLAGS == --cpu Cortex-A15 -I$(WORKSPACE)/ArmVirtPkg/Include
GCC:*_*_ARM_PLATFORM_FLAGS == -mcpu=cortex-a15 -I$(WORKSPACE)/ArmVirtPkg/Include
*_*_AARCH64_PLATFORM_FLAGS == -I$(WORKSPACE)/ArmVirtPkg/Include
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
################################################################################
#
# Pcd Section - list of all EDK II PCD Entries defined by this Platform
#
################################################################################
[PcdsFeatureFlag.common]
ArmVirtualizationPkg/ArmVirtualizationQemu: enable PCI support Beyond including the foundational drivers in the DSC and FDF files, we enable virtio-over-PCI, and turn on QemuBootOrderLib's OFW-to-UEFI device path translation for PCI devices. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16910 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:11 +01:00
gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderPciTranslation|TRUE
ArmVirtualizationPkg: PlatformIntelBdsLib: adhere to QEMU's boot order We have all the required pieces in place. Let's call SetBootOrderFromQemu() in PlatformBdsPolicyBehavior(). We disable OFW-to-UEFI device path fragment translation for virtio-pci, and enable it only virtio-mmio at this time. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16576 6f19259b-4bc3-4df7-8a09-765794883524
2015-01-02 13:08:24 +01:00
gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderMmioTranslation|TRUE
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
# It could be set FALSE to save size.
ArmVirtualizationPkg/ArmVirtualizationQemu: add VGA console output Alex Graf's QEMU patchset enables "-device VGA" for the virt machtype as well. We can now include OvmfPkg/QemuVideoDxe in the firmware, and set PcdDefaultConOutPaths such that the console output is multiplexed to the video window as well. (Our platform BDS lib doesn't (yet) locate the VGA device automatically.) OvmfPkg/PlatformDxe is included too; it allows users to select a video resolution. (Note that PcdSetupVideoHorizontalResolution and PcdSetupVideoVerticalResolution are independent; see git commit 848834cb (SVN r16311) for explanation.) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16913 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:25 +01:00
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|FALSE
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
ArmVirtualizationPkg/PciHostBridgeDxe: MMIO aperture must not be uncached Quite non-intuitively, we must allow guest-side writes to emulated PCI MMIO regions to go through the CPU cache, otherwise QEMU, whose accesses always go through the cache, may see stale data in the region. This change makes no difference for QEMU/TCG, but it is important for QEMU/KVM, at the moment. Because gDS->SetMemorySpaceAttributes() is ultimately implemented by EFI_CPU_ARCH_PROTOCOL.SetMemoryAttributes() -- see "MdeModulePkg/Core/Dxe/Gcd/Gcd.c" and "ArmPkg/Drivers/CpuDxe/" -- we add the CPU architectural protocol to the module's DepEx. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16904 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:03:42 +01:00
# Activate KVM workaround for now.
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
gArmVirtTokenSpaceGuid.PcdKludgeMapPciMmioAsCached|TRUE
ArmVirtualizationPkg/PciHostBridgeDxe: MMIO aperture must not be uncached Quite non-intuitively, we must allow guest-side writes to emulated PCI MMIO regions to go through the CPU cache, otherwise QEMU, whose accesses always go through the cache, may see stale data in the region. This change makes no difference for QEMU/TCG, but it is important for QEMU/KVM, at the moment. Because gDS->SetMemorySpaceAttributes() is ultimately implemented by EFI_CPU_ARCH_PROTOCOL.SetMemoryAttributes() -- see "MdeModulePkg/Core/Dxe/Gcd/Gcd.c" and "ArmPkg/Drivers/CpuDxe/" -- we add the CPU architectural protocol to the module's DepEx. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16904 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:03:42 +01:00
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
[PcdsFixedAtBuild.common]
gArmPlatformTokenSpaceGuid.PcdCoreCount|1
!if $(ARCH) == AARCH64
gArmTokenSpaceGuid.PcdVFPEnabled|1
!endif
gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0x4007c000
gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000
# Size of the region used by UEFI in permanent memory (Reserved 64MB)
gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x04000000
#
# ARM Pcds
#
gArmTokenSpaceGuid.PcdArmUncachedMemoryMask|0x0000000040000000
## Trustzone enable (to make the transition from EL3 to EL2 in ArmPlatformPkg/Sec)
gArmTokenSpaceGuid.PcdTrustzoneSupport|FALSE
#
# ARM PrimeCell
#
## PL011 - Serial Terminal
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|38400
ArmVirtPkg/ArmVirtQemu: drop ARM BDS and make Intel BDS the default ARM BDS support in ArmVirtQemu has been broken since SVN r17969 ("ArmPkg/BdsLib: Remove Linux loader from BdsLib") dated July 14th. Instead of fixing this, let's get rid of the ARM BDS and LinuxLoader altogether: they violate both the UEFI spec and the arm64 Linux boot protocol, and lack the level of integration with the QEMU command line that the Intel BDS has when running under ArmVirtPkg or OvmfPkg. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18153 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-04 20:41:19 +02:00
## Default Terminal Type
ArmVirtPkg: Make terminal type consistent Change default terminal type to be consistent with default ConIn/ConOut device path, which is now determined by TTY_TERMINAL flag, TTYTERM or VT100. I can't say this is a bug, as we can pass the whole console device path to ConnectController, and TerminalDxe driver will pick up the terminal in the remaining device path. However, in rare circumstances, the console devices may be disconnected with the driver, and they will be ignored by ConPlatformDxe until we pass the device path explicitly just as BDS. Changing default terminal type to be the same with console device path could help serial terminal be reconnected with normal connect controller operation. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Heyi Guo <heyi.guo@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18025 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-16 10:50:24 +02:00
## 0-PCANSI, 1-VT100, 2-VT00+, 3-UTF8, 4-TTYTERM
ArmVirtPkg/ArmVirtQemu: drop ARM BDS and make Intel BDS the default ARM BDS support in ArmVirtQemu has been broken since SVN r17969 ("ArmPkg/BdsLib: Remove Linux loader from BdsLib") dated July 14th. Instead of fixing this, let's get rid of the ARM BDS and LinuxLoader altogether: they violate both the UEFI spec and the arm64 Linux boot protocol, and lack the level of integration with the QEMU command line that the Intel BDS has when running under ArmVirtPkg or OvmfPkg. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18153 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-04 20:41:19 +02:00
!if $(TTY_TERMINAL) == TRUE
ArmVirtPkg: Make terminal type consistent Change default terminal type to be consistent with default ConIn/ConOut device path, which is now determined by TTY_TERMINAL flag, TTYTERM or VT100. I can't say this is a bug, as we can pass the whole console device path to ConnectController, and TerminalDxe driver will pick up the terminal in the remaining device path. However, in rare circumstances, the console devices may be disconnected with the driver, and they will be ignored by ConPlatformDxe until we pass the device path explicitly just as BDS. Changing default terminal type to be the same with console device path could help serial terminal be reconnected with normal connect controller operation. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Heyi Guo <heyi.guo@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18025 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-16 10:50:24 +02:00
gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4
add TTY_TERMINAL build option for ARM BDS Enable selecting the TtyTerminal type for the ARM BDS build of QEMU using the TTY_TERMINAL define. Convert INTEL_BDS define to check for value (!if) rather than just definition (!ifdef) to allow setting of either value on command line. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Roy Franz <roy.franz@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17899 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-09 08:24:29 +02:00
!else
ArmVirtPkg: Make terminal type consistent Change default terminal type to be consistent with default ConIn/ConOut device path, which is now determined by TTY_TERMINAL flag, TTYTERM or VT100. I can't say this is a bug, as we can pass the whole console device path to ConnectController, and TerminalDxe driver will pick up the terminal in the remaining device path. However, in rare circumstances, the console devices may be disconnected with the driver, and they will be ignored by ConPlatformDxe until we pass the device path explicitly just as BDS. Changing default terminal type to be the same with console device path could help serial terminal be reconnected with normal connect controller operation. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Heyi Guo <heyi.guo@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18025 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-16 10:50:24 +02:00
gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|1
add TTY_TERMINAL build option for ARM BDS Enable selecting the TtyTerminal type for the ARM BDS build of QEMU using the TTY_TERMINAL define. Convert INTEL_BDS define to check for value (!if) rather than just definition (!ifdef) to allow setting of either value on command line. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Roy Franz <roy.franz@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17899 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-09 08:24:29 +02:00
!endif
ArmPlaformPkg: Replaced gArmPlatformTokenSpaceGuid.PcdPlatformBootTimeOut ... since gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut has recently been introduced. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17443 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-13 20:25:47 +02:00
gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|3
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
ArmVirtualizationQemu: ask the hardware for the timer frequency Roughly, there are two ways to "measure ticks" in UEFI: - the SetTimer() boot service, which sets up a one-shot or periodic event callback, and takes the interval length in units of 100ns, - the Stall() boot service, which stalls the caller (but does not yield the CPU) for the interval specified. The interval is taken as a number of microseconds. If the platform in question also follows the PI (Platform Init) specification, then it is recommended to implement the above UEFI services on top of the following DXE Architectural Protocols (described in PI Volume 2): - Timer Architectural Protocol: "Used to set up a periodic timer interrupt using a platform specific timer, and a processor-specific interrupt vector. This protocol enables the use of the SetTimer() Boot Service. [...]" - Metronome Architectural Protocol: "Used to wait for ticks from a known time source in a platform. This protocol may be used to implement a simple version of the Stall() Boot Service. [...]" Edk2 in general, and ArmVirtualizationQemu in particular, follow the above pattern. SetTimer() works correctly. The underlying Timer Architectural Protocol is provided by "ArmPkg/Drivers/TimerDxe", and that driver calls the internal function ArmGenericTimerGetTimerFreq() to retrieve the timer frequency. Ultimately it boils down to reading the CNTFRQ_EL0 register. The correct behavior of SetTimer() can be observed for example: - in the grub-efi countdown ("grub-core/kern/arm/efi/init.c"), - in the Intel BDS front page countdown ("IntelFrameworkModulePkg/Universal/BdsDxe/FrontPage.c"). However, Stall() doesn't work correctly. The underlying Metronome Architectural Protocol is provided by "EmbeddedPkg/MetronomeDxe", which further delegates the job to the TimerLib library class. That in turn is resolved to the "ArmPkg/Library/ArmArchTimerLib" instance, which (finally!) takes the timer frequency from "PcdArmArchTimerFreqInHz". In ArmVirtualizationQemu we currently specify 100MHz for this PCD. Alas, that's incorect for: - both QEMU/TCG (which emulates 62.5MHz, see GTIMER_SCALE in "target-arm/internals.h"), - and KVM (where the host's virtualized timer can tick at 50 MHz, for example). Set the PCD to 0, asking ArmArchTimerLib to interrogate CNTFRQ_EL0 as well. The change can be tested with eg. the following callers of Stall(): - the UEFI Shell's countdown -- before it runs "startup.nsh" -- relies on Stall(), - the UEFI shell command "stall" also uses Stall(). (Time it with a stopwatch.) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16692 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-02 13:01:58 +01:00
# ARM Virtual Architectural Timer -- fetch frequency from QEMU (TCG) or KVM
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
ArmVirtualizationQemu: ask the hardware for the timer frequency Roughly, there are two ways to "measure ticks" in UEFI: - the SetTimer() boot service, which sets up a one-shot or periodic event callback, and takes the interval length in units of 100ns, - the Stall() boot service, which stalls the caller (but does not yield the CPU) for the interval specified. The interval is taken as a number of microseconds. If the platform in question also follows the PI (Platform Init) specification, then it is recommended to implement the above UEFI services on top of the following DXE Architectural Protocols (described in PI Volume 2): - Timer Architectural Protocol: "Used to set up a periodic timer interrupt using a platform specific timer, and a processor-specific interrupt vector. This protocol enables the use of the SetTimer() Boot Service. [...]" - Metronome Architectural Protocol: "Used to wait for ticks from a known time source in a platform. This protocol may be used to implement a simple version of the Stall() Boot Service. [...]" Edk2 in general, and ArmVirtualizationQemu in particular, follow the above pattern. SetTimer() works correctly. The underlying Timer Architectural Protocol is provided by "ArmPkg/Drivers/TimerDxe", and that driver calls the internal function ArmGenericTimerGetTimerFreq() to retrieve the timer frequency. Ultimately it boils down to reading the CNTFRQ_EL0 register. The correct behavior of SetTimer() can be observed for example: - in the grub-efi countdown ("grub-core/kern/arm/efi/init.c"), - in the Intel BDS front page countdown ("IntelFrameworkModulePkg/Universal/BdsDxe/FrontPage.c"). However, Stall() doesn't work correctly. The underlying Metronome Architectural Protocol is provided by "EmbeddedPkg/MetronomeDxe", which further delegates the job to the TimerLib library class. That in turn is resolved to the "ArmPkg/Library/ArmArchTimerLib" instance, which (finally!) takes the timer frequency from "PcdArmArchTimerFreqInHz". In ArmVirtualizationQemu we currently specify 100MHz for this PCD. Alas, that's incorect for: - both QEMU/TCG (which emulates 62.5MHz, see GTIMER_SCALE in "target-arm/internals.h"), - and KVM (where the host's virtualized timer can tick at 50 MHz, for example). Set the PCD to 0, asking ArmArchTimerLib to interrogate CNTFRQ_EL0 as well. The change can be tested with eg. the following callers of Stall(): - the UEFI Shell's countdown -- before it runs "startup.nsh" -- relies on Stall(), - the UEFI shell command "stall" also uses Stall(). (Time it with a stopwatch.) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16692 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-02 13:01:58 +01:00
gArmTokenSpaceGuid.PcdArmArchTimerFreqInHz|0
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
# NV Storage PCDs. Use base of 0x04000000 for NOR1
#
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x04000000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x00040000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x04040000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x00040000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x04080000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x00040000
# System Memory Base -- fixed at 0x4000_0000
gArmTokenSpaceGuid.PcdSystemMemoryBase|0x40000000
# initial location of the device tree blob passed by QEMU -- base of DRAM
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
ArmPlatformPkg/ArmVirtualizationPkg: Added support for Intel BDS Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16208 6f19259b-4bc3-4df7-8a09-765794883524
2014-10-13 12:55:38 +02:00
gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
ArmVirtualizationPkg: identify "new shell" as builtin shell for Intel BDS The default value of this PCD (in "IntelFrameworkModulePkg.dec") identifies the "old shell" from EdkShellBinPkg. Our build includes the "new" shell from ShellBinPkg/UefiShell/UefiShell.inf; let's specify the FILE_GUID of that. Otherwise, no boot option will be generated for the Shell application. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16577 6f19259b-4bc3-4df7-8a09-765794883524
2015-01-02 13:08:28 +01:00
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile|{ 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1 }
ArmPlatformPkg/ArmVirtualizationPkg: Added support for Intel BDS Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16208 6f19259b-4bc3-4df7-8a09-765794883524
2014-10-13 12:55:38 +02:00
ArmVirtualizationPkg/ArmVirtualizationQemu: enable IO addressing Set gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize to 16, which determines the maximum "I/O address width". This ensures, through the BuildCpuHob() call in "ArmPkg/Drivers/CpuPei/CpuPei.c", that the inital I/O Space Map will consist of a 16-bit wide "splittable" entry, when the DXE core starts (see CoreInitializeGcdServices() in "MdeModulePkg/Core/Dxe/Gcd/Gcd.c"): GCD:Initial GCD I/O Space Map GCDIoType Range ========== ================================= NonExist 0000000000000000-000000000000FFFF Otherwise this range would have size 0, and (since it could not be split) any gDS->AddIoSpace() calls would fail. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16902 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:03:32 +01:00
#
# The maximum physical I/O addressability of the processor, set with
# BuildCpuHob().
#
gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16
ArmVirtPkg/ArmVirtQemu: enable non-exec DXE stack for AARCH64 Enable the non-exec DXE stack feature when building for AARCH64. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18589 6f19259b-4bc3-4df7-8a09-765794883524
2015-10-08 20:52:33 +02:00
[PcdsFixedAtBuild.AARCH64]
gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|TRUE
ArmVirtPkg/ArmVirtQemu: limit the (I)PA space to 40 bits KVM uses a fixed size of 40 bits for its intermediate physical address space, so there is no need to support anything beyond that even if the host hardware does. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Wei Huang <wei@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18928 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-24 08:44:28 +01:00
# KVM limits it IPA space to 40 bits (1 TB), so there is no need to
# support anything bigger, even if the host hardware does
gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize|40
ArmVirtualizationPkg/VirtFdtDxe: parse "pci-host-ecam-generic" properties In the Linux kernel tree, "Documentation/devicetree/bindings/pci/host-generic-pci.txt" describes the device tree bindings of a Generic PCI host controller. Recent QEMU patches from Alexander Graf implement such a controller on the "virt" machine type of qemu-system-(aarch64|arm): pcie@10000000 { // // (devfn<<8, 0, 0) PCI irq // ---------------- ------- interrupt-map-mask = <0x1800 0x0 0x0 0x7>; // gic irq // (devfn<<8, 0, 0) pin+1 phandle (type, nr, level) // ---------------- ----- -------- ----------------- interrupt-map = < 0x0 0x0 0x0 0x1 0x8001 0x0 0x3 0x4 0x0 0x0 0x0 0x2 0x8001 0x0 0x4 0x4 0x0 0x0 0x0 0x3 0x8001 0x0 0x5 0x4 0x0 0x0 0x0 0x4 0x8001 0x0 0x6 0x4 0x800 0x0 0x0 0x1 0x8001 0x0 0x4 0x4 0x800 0x0 0x0 0x2 0x8001 0x0 0x5 0x4 0x800 0x0 0x0 0x3 0x8001 0x0 0x6 0x4 0x800 0x0 0x0 0x4 0x8001 0x0 0x3 0x4 0x1000 0x0 0x0 0x1 0x8001 0x0 0x5 0x4 0x1000 0x0 0x0 0x2 0x8001 0x0 0x6 0x4 0x1000 0x0 0x0 0x3 0x8001 0x0 0x3 0x4 0x1000 0x0 0x0 0x4 0x8001 0x0 0x4 0x4 0x1800 0x0 0x0 0x1 0x8001 0x0 0x6 0x4 0x1800 0x0 0x0 0x2 0x8001 0x0 0x3 0x4 0x1800 0x0 0x0 0x3 0x8001 0x0 0x4 0x4 0x1800 0x0 0x0 0x4 0x8001 0x0 0x5 0x4>; #interrupt-cells = <0x1>; // // child base cpu base // type address address size // --------- -------------- -------------- -------------- ranges = <0x1000000 0x0 0x0 0x0 0x3eff0000 0x0 0x10000 0x2000000 0x0 0x10000000 0x0 0x10000000 0x0 0x2eff0000>; // // PCIe config PCIe config // space base space size // -------------- ------------- reg = <0x0 0x3f000000 0x0 0x1000000>; // // allowed bus numbers; inclusive range // bus-range = <0x0 0xf>; #size-cells = <0x2>; #address-cells = <0x3>; device_type = "pci"; compatible = "pci-host-ecam-generic"; }; Parse those properties of the compatible="pci-host-ecam-generic" node into PCDs that are relevant for PCI enumeration in edk2: - gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress controls MdePkg/Library/BasePciExpressLib, - gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration controls OvmfPkg/AcpiPlatformDxe at this point, - the rest have been introduced earlier in this patchset, and will control PCI range checks and translation. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16894 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:02:50 +01:00
[PcdsDynamicDefault.common]
ArmVirtualizationPkg: Set PcdPciDisableBusEnumeration to TRUE This setting makes OvmfPkg/AcpiPlatformDxe not wait for PCI enumeration to complete before installing ACPI tables. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16886 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-20 00:46:13 +01:00
## If TRUE, OvmfPkg/AcpiPlatformDxe will not wait for PCI
# enumeration to complete before installing ACPI tables.
gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|TRUE
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
# System Memory Size -- 1 MB initially, actual size will be fetched from DT
gArmTokenSpaceGuid.PcdSystemMemorySize|0x00100000
gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum|0x0
gArmTokenSpaceGuid.PcdArmArchTimerIntrNum|0x0
gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum|0x0
gArmTokenSpaceGuid.PcdArmArchTimerHypIntrNum|0x0
#
# ARM General Interrupt Controller
#
gArmTokenSpaceGuid.PcdGicDistributorBase|0x0
ArmVirtualizationPkg: add GICv3 detection to VirtFdtDxe This adds support for detecting the presence of a GICv3 interrupt controller from the device tree, and recording its distributor and redistributor base addresses in their respective PCDs. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Olivier Martin <olivier.martin@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16956 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-28 21:25:26 +01:00
gArmTokenSpaceGuid.PcdGicRedistributorsBase|0x0
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase|0x0
ArmVirtPkg: record GIC revision in dynamic PCD In order to allow a ArmGicArchLib to be implemented that returns the supported GIC revision based on the device tree, add handling to VirtFdtDxe to record the GIC revision at DT parsing time. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18101 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-28 22:45:25 +02:00
gArmVirtTokenSpaceGuid.PcdArmGicRevision|0x0
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
## PL031 RealTimeClock
gArmPlatformTokenSpaceGuid.PcdPL031RtcBase|0x0
ArmVirtualizationPkg/VirtFdtDxe: parse "pci-host-ecam-generic" properties In the Linux kernel tree, "Documentation/devicetree/bindings/pci/host-generic-pci.txt" describes the device tree bindings of a Generic PCI host controller. Recent QEMU patches from Alexander Graf implement such a controller on the "virt" machine type of qemu-system-(aarch64|arm): pcie@10000000 { // // (devfn<<8, 0, 0) PCI irq // ---------------- ------- interrupt-map-mask = <0x1800 0x0 0x0 0x7>; // gic irq // (devfn<<8, 0, 0) pin+1 phandle (type, nr, level) // ---------------- ----- -------- ----------------- interrupt-map = < 0x0 0x0 0x0 0x1 0x8001 0x0 0x3 0x4 0x0 0x0 0x0 0x2 0x8001 0x0 0x4 0x4 0x0 0x0 0x0 0x3 0x8001 0x0 0x5 0x4 0x0 0x0 0x0 0x4 0x8001 0x0 0x6 0x4 0x800 0x0 0x0 0x1 0x8001 0x0 0x4 0x4 0x800 0x0 0x0 0x2 0x8001 0x0 0x5 0x4 0x800 0x0 0x0 0x3 0x8001 0x0 0x6 0x4 0x800 0x0 0x0 0x4 0x8001 0x0 0x3 0x4 0x1000 0x0 0x0 0x1 0x8001 0x0 0x5 0x4 0x1000 0x0 0x0 0x2 0x8001 0x0 0x6 0x4 0x1000 0x0 0x0 0x3 0x8001 0x0 0x3 0x4 0x1000 0x0 0x0 0x4 0x8001 0x0 0x4 0x4 0x1800 0x0 0x0 0x1 0x8001 0x0 0x6 0x4 0x1800 0x0 0x0 0x2 0x8001 0x0 0x3 0x4 0x1800 0x0 0x0 0x3 0x8001 0x0 0x4 0x4 0x1800 0x0 0x0 0x4 0x8001 0x0 0x5 0x4>; #interrupt-cells = <0x1>; // // child base cpu base // type address address size // --------- -------------- -------------- -------------- ranges = <0x1000000 0x0 0x0 0x0 0x3eff0000 0x0 0x10000 0x2000000 0x0 0x10000000 0x0 0x10000000 0x0 0x2eff0000>; // // PCIe config PCIe config // space base space size // -------------- ------------- reg = <0x0 0x3f000000 0x0 0x1000000>; // // allowed bus numbers; inclusive range // bus-range = <0x0 0xf>; #size-cells = <0x2>; #address-cells = <0x3>; device_type = "pci"; compatible = "pci-host-ecam-generic"; }; Parse those properties of the compatible="pci-host-ecam-generic" node into PCDs that are relevant for PCI enumeration in edk2: - gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress controls MdePkg/Library/BasePciExpressLib, - gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration controls OvmfPkg/AcpiPlatformDxe at this point, - the rest have been introduced earlier in this patchset, and will control PCI range checks and translation. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16894 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:02:50 +01:00
gArmPlatformTokenSpaceGuid.PcdPciBusMin|0x0
gArmPlatformTokenSpaceGuid.PcdPciBusMax|0x0
gArmPlatformTokenSpaceGuid.PcdPciIoBase|0x0
gArmPlatformTokenSpaceGuid.PcdPciIoSize|0x0
gArmPlatformTokenSpaceGuid.PcdPciIoTranslation|0x0
gArmPlatformTokenSpaceGuid.PcdPciMmio32Base|0x0
gArmPlatformTokenSpaceGuid.PcdPciMmio32Size|0x0
gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress|0x0
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
gArmVirtTokenSpaceGuid.PcdArmPsciMethod|0
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
gArmVirtTokenSpaceGuid.PcdFwCfgSelectorAddress|0x0
gArmVirtTokenSpaceGuid.PcdFwCfgDataAddress|0x0
ArmVirtPkg: VirtFdtDxe: detect fw-cfg DMA interface from the DTB A DMA-like transfer interface has recently been implemented in QEMU for fw-cfg. For ARM and AARCH64 virtual machines, the binding prescribes a new 8-byte wide register at offset 0x10 in the register block. Make VirtFdtDxe expose this register if it is present. Please see "docs/specs/fw_cfg.txt" in the QEMU tree for more information. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18544 6f19259b-4bc3-4df7-8a09-765794883524
2015-09-24 23:40:36 +02:00
gArmVirtTokenSpaceGuid.PcdFwCfgDmaAddress|0x0
ArmVirtualizationPkg: VirtFdtDxe: forward FwCfg addresses from DTB to PCDs Qemu's firmware configuration interface for ARM consists of two MMIO registers, a 16-bit selector, and a 64-bit data register that allows the guest to transfer data with 8, 16, 32, and 64-bit wide accesses. Parse the base address from the DTB, and expose the registers to the rest of DXE via dynamic PCDs. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16566 6f19259b-4bc3-4df7-8a09-765794883524
2015-01-02 13:04:05 +01:00
ArmVirtualizationPkg/ArmVirtualizationQemu: add VGA console output Alex Graf's QEMU patchset enables "-device VGA" for the virt machtype as well. We can now include OvmfPkg/QemuVideoDxe in the firmware, and set PcdDefaultConOutPaths such that the console output is multiplexed to the video window as well. (Our platform BDS lib doesn't (yet) locate the VGA device automatically.) OvmfPkg/PlatformDxe is included too; it allows users to select a video resolution. (Note that PcdSetupVideoHorizontalResolution and PcdSetupVideoVerticalResolution are independent; see git commit 848834cb (SVN r16311) for explanation.) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16913 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:25 +01:00
#
# Set video resolution for boot options and for text setup.
# PlatformDxe can set the former at runtime.
#
gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800
gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600
ArmPlatformPkg: Use the new PCDs defined in MdePkg and MdeModulePkg. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17324 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-06 06:44:43 +02:00
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|640
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|480
ArmVirtualizationPkg/ArmVirtualizationQemu: add VGA console output Alex Graf's QEMU patchset enables "-device VGA" for the virt machtype as well. We can now include OvmfPkg/QemuVideoDxe in the firmware, and set PcdDefaultConOutPaths such that the console output is multiplexed to the video window as well. (Our platform BDS lib doesn't (yet) locate the VGA device automatically.) OvmfPkg/PlatformDxe is included too; it allows users to select a video resolution. (Note that PcdSetupVideoHorizontalResolution and PcdSetupVideoVerticalResolution are independent; see git commit 848834cb (SVN r16311) for explanation.) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16913 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:25 +01:00
ArmVirtPkg: QemuFwCfgToPcdDxe: set SMBIOS entry point version dynamically (This patch parallels OvmfPkg commit 37baf06b (SVN r17676).) PcdSmbiosVersion controls the version number of the SMBIOS entry point table (and other, related things) that the universal "MdeModulePkg/Universal/SmbiosDxe" driver, providing EFI_SMBIOS_PROTOCOL, installs. The "virt" machine type of QEMU generates SMBIOS payload for the firmware to install. The payload includes the entry point table ("anchor" table). OvmfPkg/SmbiosPlatformDxe cannot install the anchor table (because that is the jurisdiction of the generic "MdeModulePkg/Universal/SmbiosDxe" driver); however, we can parse the entry point version from QEMU's anchor table, and instruct "MdeModulePkg/Universal/SmbiosDxe" to adhere to that version. As default for PcdSmbiosVersion we should keep the current 0x0300 value (ie. SMBIOS 3.0) from "MdeModulePkg/MdeModulePkg.dec"; that spec version was specifically created for ARM / AARCH64 needs. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18043 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-26 10:02:55 +02:00
#
# SMBIOS entry point version
#
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300
ArmVirtPkg: set default for PcdSmbiosDocRev When MdeModulePkg/Universal/SmbiosDxe is instructed to compose & install an SMBIOS 3.0 entry point, it keys the Docrev (specification document revision) field of that structure off of PcdSmbiosDocRev. An upcoming OvmfPkg patch will have OvmfPkg/Library/SmbiosVersionLib set this PCD dynamically. Because we use that driver in the ArmVirtQemu.dsc platform, we must provide a default for the dynamic PCD. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Wei Huang <wei@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18181 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-06 12:14:07 +02:00
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0
ArmVirtPkg/ArmVirtQemu.dsc: set default for PcdQemuSmbiosValidated The upcoming OvmfPkg patches will implicitly affect the ArmVirtQemu.dsc build, necessitating a default value for the new dynamic PcdQemuSmbiosValidated. Add it. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Wei Huang <wei@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18179 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-06 12:13:59 +02:00
gUefiOvmfPkgTokenSpaceGuid.PcdQemuSmbiosValidated|FALSE
ArmVirtPkg: QemuFwCfgToPcdDxe: set SMBIOS entry point version dynamically (This patch parallels OvmfPkg commit 37baf06b (SVN r17676).) PcdSmbiosVersion controls the version number of the SMBIOS entry point table (and other, related things) that the universal "MdeModulePkg/Universal/SmbiosDxe" driver, providing EFI_SMBIOS_PROTOCOL, installs. The "virt" machine type of QEMU generates SMBIOS payload for the firmware to install. The payload includes the entry point table ("anchor" table). OvmfPkg/SmbiosPlatformDxe cannot install the anchor table (because that is the jurisdiction of the generic "MdeModulePkg/Universal/SmbiosDxe" driver); however, we can parse the entry point version from QEMU's anchor table, and instruct "MdeModulePkg/Universal/SmbiosDxe" to adhere to that version. As default for PcdSmbiosVersion we should keep the current 0x0300 value (ie. SMBIOS 3.0) from "MdeModulePkg/MdeModulePkg.dec"; that spec version was specifically created for ARM / AARCH64 needs. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18043 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-26 10:02:55 +02:00
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
################################################################################
#
# Components Section - list of all EDK II Modules needed by this Platform
#
################################################################################
[Components.common]
#
# PEI Phase modules
#
ArmVirtPkg: drop ArmPlatformGlobalVariableLib dependency Now that all PeiServicesTablePointerLib and PrePiHobListPointerLib library dependencies in both ArmVirtQemu and ArmVirtXen are satisfied by implementations that do not depend on ArmPlatformGlobalVariableLib, we can remove all mention of it from the various .dsc files. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18986 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-27 18:05:47 +01:00
ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
MdeModulePkg/Core/Pei/PeiMain.inf
MdeModulePkg/Universal/PCD/Pei/Pcd.inf
ArmPlatformPkg/PlatformPei/PlatformPeim.inf
ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
ArmPkg/Drivers/CpuPei/CpuPei.inf
MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
ArmVirtualizationPkg: Enable secure boot for ArmVirtualizationQemu This adds all the required modules and library dependencies so that the ArmVirtualizationQemu platform can be built with support for UEFI Secure Boot. This support consists of the OpenSSL crypto library (whose source needs to be downloaded separately), the authenticated variable store, and authentication of executables before launching them. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17356 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-07 17:22:31 +02:00
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf {
<LibraryClasses>
ArmPlatformPkg: Use LzmaDecompress support from MdeModulePkg LzmaDecompress support is moving from IntelFrameworkPkg to MdeModulePkg. This change ensures ArmPlatformPkg reflects this future change. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Ronald Cron <ronald.cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17133 6f19259b-4bc3-4df7-8a09-765794883524
2015-04-08 21:58:50 +02:00
NULL|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
}
#
# DXE
#
MdeModulePkg/Core/Dxe/DxeMain.inf {
<LibraryClasses>
NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf
}
MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
#
# Architectural Protocols
#
ArmPkg/Drivers/CpuDxe/CpuDxe.inf
MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
ArmVirtPkg: Link separated VarCheckUefiLib NULL class library instance Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18290 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-25 05:03:23 +02:00
MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
<LibraryClasses>
NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf
}
ArmVirtualizationPkg: Enable secure boot for ArmVirtualizationQemu This adds all the required modules and library dependencies so that the ArmVirtualizationQemu platform can be built with support for UEFI Secure Boot. This support consists of the OpenSSL crypto library (whose source needs to be downloaded separately), the authenticated variable store, and authentication of executables before launching them. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17356 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-07 17:22:31 +02:00
!if $(SECURE_BOOT_ENABLE) == TRUE
MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf {
<LibraryClasses>
NULL|SecurityPkg/Library/DxeImageVerificationLib/DxeImageVerificationLib.inf
}
SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
!else
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
ArmVirtualizationPkg: Enable secure boot for ArmVirtualizationQemu This adds all the required modules and library dependencies so that the ArmVirtualizationQemu platform can be built with support for UEFI Secure Boot. This support consists of the OpenSSL crypto library (whose source needs to be downloaded separately), the authenticated variable store, and authentication of executables before launching them. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17356 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-07 17:22:31 +02:00
!endif
MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
ArmVirtPkg: Use SerialDxe in MdeModulePkg instead of EmbeddedPkg Beyond just changing the directly related lines in the FDF and DSC files, we have to adapt the EarlyFdtPL011SerialPortLib and FdtPL011SerialPortLib instances as well, in the same patch. This is because the EmbeddedPkg driver expects the SerialPortSetAttributes(), SerialPortSetControl() and SerialPortGetControl() functions from SerialPortExtLib, while the MdeModulePkg driver expects them from SerialPortLib itself. We cannot implement these functions in ArmVirtPkg's SerialPortLib instances *before* flipping the driver, because it would cause double function definitions in the EmbeddedPkg driver. We also can't implement the functions *after* flipping the driver, because it would cause unresolved function references in the MdeModulePkg driver. Therefore we have to implement the functions simultaneously with the driver replacement. Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18973 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-26 09:52:12 +01:00
MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
ArmPkg/Drivers/TimerDxe/TimerDxe.inf
ArmVirtualizationPkg: Enable secure boot for ArmVirtualizationQemu This adds all the required modules and library dependencies so that the ArmVirtualizationQemu platform can be built with support for UEFI Secure Boot. This support consists of the OpenSSL crypto library (whose source needs to be downloaded separately), the authenticated variable store, and authentication of executables before launching them. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17356 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-07 17:22:31 +02:00
!if $(SECURE_BOOT_ENABLE) == TRUE
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashAuthenticatedDxe.inf
!else
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
!endif
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
#
# Platform Driver
#
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
ArmVirtPkg/VirtFdtDxe/VirtFdtDxe.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
OvmfPkg/VirtioNetDxe/VirtioNet.inf
#
# FAT filesystem + GPT/MBR partitioning
#
MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
#
# Bds
#
MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
ArmPlatformPkg/ArmVirtualizationPkg: Added support for Intel BDS Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16208 6f19259b-4bc3-4df7-8a09-765794883524
2014-10-13 12:55:38 +02:00
MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
# SCSI Bus and Disk Driver
#
MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
ArmVirtualizationPkg: add simple ACPI Platform Driver to the QEMU platform Introduce an ACPI platform driver for ARM / AARCH64 virtual machines. "OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf" downloads ACPI blobs from QEMU over fw_cfg, processes them, and installs the resultant ACPI tables. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16698 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-02 20:09:07 +01:00
ArmVirtPkg/ArmVirtQemu: support SMBIOS The "MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf" driver is generic, it provides EFI_SMBIOS_PROTOCOL. The "OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf" driver downloads the SMBIOS payload from QEMU via fw_cfg. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18044 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-26 10:03:00 +02:00
#
# SMBIOS Support
#
ArmVirtPkg: set SMBIOS version in DetectSmbiosVersionLib instead of QemuFwCfgToPcdDxe This patch de-duplicates the logic added in commit ArmVirtPkg: QemuFwCfgToPcdDxe: set SMBIOS entry point version dynamically (git c98da334, SVN r18043) by hooking DetectSmbiosVersionLib into SmbiosDxe. Although said commit was supposed to work with SMBIOS 3.0 payloads from QEMU, in practice that never worked, because the size / signature checks in SmbiosVersionInitialization() would always fail, due to the SMBIOS 3.0 entry point being structurally different. Therefore this patch doesn't regress ArmVirtPkg. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Wei Huang <wei@redhat.com> Suggested-by: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18176 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-06 12:13:46 +02:00
MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf {
<LibraryClasses>
NULL|OvmfPkg/Library/SmbiosVersionLib/DetectSmbiosVersionLib.inf
}
ArmVirtPkg/ArmVirtQemu: support SMBIOS The "MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf" driver is generic, it provides EFI_SMBIOS_PROTOCOL. The "OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf" driver downloads the SMBIOS payload from QEMU via fw_cfg. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18044 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-26 10:03:00 +02:00
OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf
ArmVirtualizationPkg: add simple ACPI Platform Driver to the QEMU platform Introduce an ACPI platform driver for ARM / AARCH64 virtual machines. "OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf" downloads ACPI blobs from QEMU over fw_cfg, processes them, and installs the resultant ACPI tables. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16698 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-02 20:09:07 +01:00
#
# ACPI Support
#
MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: enable PCI support Beyond including the foundational drivers in the DSC and FDF files, we enable virtio-over-PCI, and turn on QemuBootOrderLib's OFW-to-UEFI device path translation for PCI devices. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16910 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:11 +01:00
#
# PCI support
#
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
ArmVirtPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: enable PCI support Beyond including the foundational drivers in the DSC and FDF files, we enable virtio-over-PCI, and turn on QemuBootOrderLib's OFW-to-UEFI device path translation for PCI devices. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16910 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:11 +01:00
MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: add VGA console output Alex Graf's QEMU patchset enables "-device VGA" for the virt machtype as well. We can now include OvmfPkg/QemuVideoDxe in the firmware, and set PcdDefaultConOutPaths such that the console output is multiplexed to the video window as well. (Our platform BDS lib doesn't (yet) locate the VGA device automatically.) OvmfPkg/PlatformDxe is included too; it allows users to select a video resolution. (Note that PcdSetupVideoHorizontalResolution and PcdSetupVideoVerticalResolution are independent; see git commit 848834cb (SVN r16311) for explanation.) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16913 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:25 +01:00
#
# Video support
#
OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf {
<LibraryClasses>
BltLib|OptionRomPkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf
}
OvmfPkg/PlatformDxe/Platform.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: add USB keyboard input Similarly to the previous patch, we can now multiplex input from the USB keyboard. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16914 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:30 +01:00
#
# USB Support
#
MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: include XHCI driver The "virt" machine type of qemu-system-(arm|aarch64) had no PCIe support prior to qemu commit 4ab29b82 arm: Add PCIe host bridge in virt machine With that commit, the "virt" board acquired the capability to expose an XHCI controller. Using a USB keyboard as example, the command line options were -device nec-usb-xhci -device usb-kbd However, due to a slight XHCI emulation bug in QEMU -- dating back to several years earlier -- edk2's XHCI driver would encounter a failed ASSERT(). This emulation problem has been fixed in QEMU commit aa685789 xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set and now edk2's XHCI driver works well on QEMU's "nec-usb-xhci" device. Let's enable the driver in ArmVirtualizationQemu, as XHCI emulation is reportedly more virtualization-friendly than EHCI, consuming less CPU. (ArmVirtualizationXen is not modified because it includes no USB-related drivers at all.) This patch should not regress existing QEMU command lines (ie. expose the failed ASSERT()) because QEMU's "-device nec-usb-xhci" has never before resulted in USB devices that worked with edk2 firmware builds, hence users have never had a reason to add that option. Now that they learn about XHCI support in ArmVirtualizationQemu by reading this commit message, they (or their packagers) will also know to update qemu to aa685789 or later (in practice that means the upcoming 2.3 release), at least if they want to use '-device nec-usb-xhci' with edk2, for the first time ever. Cc: Leif Lindholm <Leif.Lindholm@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Alexander Graf <agraf@suse.de> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17053 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-16 20:57:06 +01:00
MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: add USB keyboard input Similarly to the previous patch, we can now multiplex input from the USB keyboard. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16914 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:30 +01:00
MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
ArmVirtPkg/ArmVirtQemu: add LinuxLoader UEFI app to ARM build The ARM build still needs an intermediate loader to boot Linux, since ARM/Linux has no builtin UEFI boot stub (yet). So add the LinuxLoader UEFI application to the FV, and enable the FvSimpleFileSystemDxe driver so that we can invoke the Linux loader from the shell, e.g., Shell> linuxloader fs2:zImage -c console=ttyAMA0 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18155 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-04 20:41:45 +02:00
[Components.ARM]
#
# The ARM/Linux kernel has no built in EFI boot stub (yet), so we still need
# an intermediate OS loader. Add the LinuxLoader UEFI application so we can
# invoke it from the shell.
#
MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
ArmPkg/Application/LinuxLoader/LinuxLoader.inf {
<LibraryClasses>
BdsLib|ArmPkg/Library/BdsLib/BdsLib.inf
}