audk/PcAtChipsetPkg/8259InterruptControllerDxe/8259.c

620 lines
17 KiB
C
Raw Normal View History

/**@file
This contains the installation function for the driver.
Copyright (c) 2005 - 2009, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "8259.h"
//
// Global for the Legacy 8259 Protocol that is produced by this driver
//
EFI_LEGACY_8259_PROTOCOL m8259 = {
Interrupt8259SetVectorBase,
Interrupt8259GetMask,
Interrupt8259SetMask,
Interrupt8259SetMode,
Interrupt8259GetVector,
Interrupt8259EnableIrq,
Interrupt8259DisableIrq,
Interrupt8259GetInterruptLine,
Interrupt8259EndOfInterrupt
};
//
// Global for the handle that the Legacy 8259 Protocol is installed
//
EFI_HANDLE m8259Handle = NULL;
UINT8 mMasterBase = 0xff;
UINT8 mSlaveBase = 0xff;
EFI_8259_MODE mMode = Efi8259ProtectedMode;
UINT16 mProtectedModeMask = 0xffff;
UINT16 mLegacyModeMask = 0x06b8;
UINT16 mProtectedModeEdgeLevel = 0x0000;
UINT16 mLegacyModeEdgeLevel = 0x0000;
//
// Worker Functions
//
/**
Write to mask and edge/level triggered registers of master and slave PICs.
@param[in] Mask low byte for master PIC mask register,
high byte for slave PIC mask register.
@param[in] EdgeLevel low byte for master PIC edge/level triggered register,
high byte for slave PIC edge/level triggered register.
**/
VOID
Interrupt8259WriteMask (
IN UINT16 Mask,
IN UINT16 EdgeLevel
)
{
IoWrite8 (LEGACY_8259_MASK_REGISTER_MASTER, (UINT8) Mask);
IoWrite8 (LEGACY_8259_MASK_REGISTER_SLAVE, (UINT8) (Mask >> 8));
IoWrite8 (LEGACY_8259_EDGE_LEVEL_TRIGGERED_REGISTER_MASTER, (UINT8) EdgeLevel);
IoWrite8 (LEGACY_8259_EDGE_LEVEL_TRIGGERED_REGISTER_SLAVE, (UINT8) (EdgeLevel >> 8));
}
/**
Read from mask and edge/level triggered registers of master and slave PICs.
@param[out] Mask low byte for master PIC mask register,
high byte for slave PIC mask register.
@param[out] EdgeLevel low byte for master PIC edge/level triggered register,
high byte for slave PIC edge/level triggered register.
**/
VOID
Interrupt8259ReadMask (
OUT UINT16 *Mask,
OUT UINT16 *EdgeLevel
)
{
UINT16 MasterValue;
UINT16 SlaveValue;
if (Mask != NULL) {
MasterValue = IoRead8 (LEGACY_8259_MASK_REGISTER_MASTER);
SlaveValue = IoRead8 (LEGACY_8259_MASK_REGISTER_SLAVE);
*Mask = (UINT16) (MasterValue | (SlaveValue << 8));
}
if (EdgeLevel != NULL) {
MasterValue = IoRead8 (LEGACY_8259_EDGE_LEVEL_TRIGGERED_REGISTER_MASTER);
SlaveValue = IoRead8 (LEGACY_8259_EDGE_LEVEL_TRIGGERED_REGISTER_SLAVE);
*EdgeLevel = (UINT16) (MasterValue | (SlaveValue << 8));
}
}
//
// Legacy 8259 Protocol Interface Functions
//
/**
Sets the base address for the 8259 master and slave PICs.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] MasterBase Interrupt vectors for IRQ0-IRQ7.
@param[in] SlaveBase Interrupt vectors for IRQ8-IRQ15.
@retval EFI_SUCCESS The 8259 PIC was programmed successfully.
@retval EFI_DEVICE_ERROR There was an error while writing to the 8259 PIC.
**/
EFI_STATUS
EFIAPI
Interrupt8259SetVectorBase (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN UINT8 MasterBase,
IN UINT8 SlaveBase
)
{
UINT8 Mask;
//
// Set vector base for slave PIC
//
if (SlaveBase != mSlaveBase) {
mSlaveBase = SlaveBase;
//
// Initialization sequence is needed for setting vector base.
//
//
// Preserve interrtup mask register before initialization sequence
// because it will be cleared during intialization
//
Mask = IoRead8 (LEGACY_8259_MASK_REGISTER_SLAVE);
//
// ICW1: cascade mode, ICW4 write required
//
IoWrite8 (LEGACY_8259_CONTROL_REGISTER_SLAVE, 0x11);
//
// ICW2: new vector base (must be multiple of 8)
//
IoWrite8 (LEGACY_8259_MASK_REGISTER_SLAVE, mSlaveBase);
//
// ICW3: slave indentification code must be 2
//
IoWrite8 (LEGACY_8259_MASK_REGISTER_SLAVE, 0x02);
//
// ICW4: fully nested mode, non-buffered mode, normal EOI, IA processor
//
IoWrite8 (LEGACY_8259_MASK_REGISTER_SLAVE, 0x01);
//
// Restore interrupt mask register
//
IoWrite8 (LEGACY_8259_MASK_REGISTER_SLAVE, Mask);
}
//
// Set vector base for master PIC
//
if (MasterBase != mMasterBase) {
mMasterBase = MasterBase;
//
// Initialization sequence is needed for setting vector base.
//
//
// Preserve interrtup mask register before initialization sequence
// because it will be cleared during intialization
//
Mask = IoRead8 (LEGACY_8259_MASK_REGISTER_MASTER);
//
// ICW1: cascade mode, ICW4 write required
//
IoWrite8 (LEGACY_8259_CONTROL_REGISTER_MASTER, 0x11);
//
// ICW2: new vector base (must be multiple of 8)
//
IoWrite8 (LEGACY_8259_MASK_REGISTER_MASTER, mMasterBase);
//
// ICW3: slave PIC is cascaded on IRQ2
//
IoWrite8 (LEGACY_8259_MASK_REGISTER_MASTER, 0x04);
//
// ICW4: fully nested mode, non-buffered mode, normal EOI, IA processor
//
IoWrite8 (LEGACY_8259_MASK_REGISTER_MASTER, 0x01);
//
// Restore interrupt mask register
//
IoWrite8 (LEGACY_8259_MASK_REGISTER_MASTER, Mask);
}
IoWrite8 (LEGACY_8259_CONTROL_REGISTER_SLAVE, LEGACY_8259_EOI);
IoWrite8 (LEGACY_8259_CONTROL_REGISTER_MASTER, LEGACY_8259_EOI);
return EFI_SUCCESS;
}
/**
Gets the current 16-bit real mode and 32-bit protected-mode IRQ masks.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[out] LegacyMask 16-bit mode interrupt mask for IRQ0-IRQ15.
@param[out] LegacyEdgeLevel 16-bit mode edge/level mask for IRQ-IRQ15.
@param[out] ProtectedMask 32-bit mode interrupt mask for IRQ0-IRQ15.
@param[out] ProtectedEdgeLevel 32-bit mode edge/level mask for IRQ0-IRQ15.
@retval EFI_SUCCESS The 8259 PIC was programmed successfully.
@retval EFI_DEVICE_ERROR There was an error while reading the 8259 PIC.
**/
EFI_STATUS
EFIAPI
Interrupt8259GetMask (
IN EFI_LEGACY_8259_PROTOCOL *This,
OUT UINT16 *LegacyMask, OPTIONAL
OUT UINT16 *LegacyEdgeLevel, OPTIONAL
OUT UINT16 *ProtectedMask, OPTIONAL
OUT UINT16 *ProtectedEdgeLevel OPTIONAL
)
{
if (LegacyMask != NULL) {
*LegacyMask = mLegacyModeMask;
}
if (LegacyEdgeLevel != NULL) {
*LegacyEdgeLevel = mLegacyModeEdgeLevel;
}
if (ProtectedMask != NULL) {
*ProtectedMask = mProtectedModeMask;
}
if (ProtectedEdgeLevel != NULL) {
*ProtectedEdgeLevel = mProtectedModeEdgeLevel;
}
return EFI_SUCCESS;
}
/**
Sets the current 16-bit real mode and 32-bit protected-mode IRQ masks.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] LegacyMask 16-bit mode interrupt mask for IRQ0-IRQ15.
@param[in] LegacyEdgeLevel 16-bit mode edge/level mask for IRQ-IRQ15.
@param[in] ProtectedMask 32-bit mode interrupt mask for IRQ0-IRQ15.
@param[in] ProtectedEdgeLevel 32-bit mode edge/level mask for IRQ0-IRQ15.
@retval EFI_SUCCESS The 8259 PIC was programmed successfully.
@retval EFI_DEVICE_ERROR There was an error while writing the 8259 PIC.
**/
EFI_STATUS
EFIAPI
Interrupt8259SetMask (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN UINT16 *LegacyMask, OPTIONAL
IN UINT16 *LegacyEdgeLevel, OPTIONAL
IN UINT16 *ProtectedMask, OPTIONAL
IN UINT16 *ProtectedEdgeLevel OPTIONAL
)
{
if (LegacyMask != NULL) {
mLegacyModeMask = *LegacyMask;
}
if (LegacyEdgeLevel != NULL) {
mLegacyModeEdgeLevel = *LegacyEdgeLevel;
}
if (ProtectedMask != NULL) {
mProtectedModeMask = *ProtectedMask;
}
if (ProtectedEdgeLevel != NULL) {
mProtectedModeEdgeLevel = *ProtectedEdgeLevel;
}
return EFI_SUCCESS;
}
/**
Sets the mode of the PICs.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] Mode 16-bit real or 32-bit protected mode.
@param[in] Mask The value with which to set the interrupt mask.
@param[in] EdgeLevel The value with which to set the edge/level mask.
@retval EFI_SUCCESS The mode was set successfully.
@retval EFI_INVALID_PARAMETER The mode was not set.
**/
EFI_STATUS
EFIAPI
Interrupt8259SetMode (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN EFI_8259_MODE Mode,
IN UINT16 *Mask, OPTIONAL
IN UINT16 *EdgeLevel OPTIONAL
)
{
if (Mode == mMode) {
return EFI_SUCCESS;
}
if (Mode == Efi8259LegacyMode) {
//
// In Efi8259ProtectedMode, mask and edge/level trigger registers should
// be changed through this protocol, so we can track them in the
// corresponding module variables.
//
Interrupt8259ReadMask (&mProtectedModeMask, &mProtectedModeEdgeLevel);
if (Mask != NULL) {
//
// Update the Mask for the new mode
//
mLegacyModeMask = *Mask;
}
if (EdgeLevel != NULL) {
//
// Update the Edge/Level triggered mask for the new mode
//
mLegacyModeEdgeLevel = *EdgeLevel;
}
mMode = Mode;
//
// Write new legacy mode mask/trigger level
//
Interrupt8259WriteMask (mLegacyModeMask, mLegacyModeEdgeLevel);
return EFI_SUCCESS;
}
if (Mode == Efi8259ProtectedMode) {
//
// Save the legacy mode mask/trigger level
//
Interrupt8259ReadMask (&mLegacyModeMask, &mLegacyModeEdgeLevel);
//
// Always force Timer to be enabled after return from 16-bit code.
// This always insures that on next entry, timer is counting.
//
mLegacyModeMask &= 0xFFFE;
if (Mask != NULL) {
//
// Update the Mask for the new mode
//
mProtectedModeMask = *Mask;
}
if (EdgeLevel != NULL) {
//
// Update the Edge/Level triggered mask for the new mode
//
mProtectedModeEdgeLevel = *EdgeLevel;
}
mMode = Mode;
//
// Write new protected mode mask/trigger level
//
Interrupt8259WriteMask (mProtectedModeMask, mProtectedModeEdgeLevel);
return EFI_SUCCESS;
}
return EFI_INVALID_PARAMETER;
}
/**
Translates the IRQ into a vector.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] Irq IRQ0-IRQ15.
@param[out] Vector The vector that is assigned to the IRQ.
@retval EFI_SUCCESS The Vector that matches Irq was returned.
@retval EFI_INVALID_PARAMETER Irq is not valid.
**/
EFI_STATUS
EFIAPI
Interrupt8259GetVector (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN EFI_8259_IRQ Irq,
OUT UINT8 *Vector
)
{
if (Irq < Efi8259Irq0 || Irq > Efi8259Irq15) {
return EFI_INVALID_PARAMETER;
}
if (Irq <= Efi8259Irq7) {
*Vector = (UINT8) (mMasterBase + Irq);
} else {
*Vector = (UINT8) (mSlaveBase + (Irq - Efi8259Irq8));
}
return EFI_SUCCESS;
}
/**
Enables the specified IRQ.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] Irq IRQ0-IRQ15.
@param[in] LevelTriggered 0 = Edge triggered; 1 = Level triggered.
@retval EFI_SUCCESS The Irq was enabled on the 8259 PIC.
@retval EFI_INVALID_PARAMETER The Irq is not valid.
**/
EFI_STATUS
EFIAPI
Interrupt8259EnableIrq (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN EFI_8259_IRQ Irq,
IN BOOLEAN LevelTriggered
)
{
if (Irq < Efi8259Irq0 || Irq > Efi8259Irq15) {
return EFI_INVALID_PARAMETER;
}
mProtectedModeMask = (UINT16) (mProtectedModeMask & ~(1 << Irq));
if (LevelTriggered) {
mProtectedModeEdgeLevel = (UINT16) (mProtectedModeEdgeLevel | (1 << Irq));
} else {
mProtectedModeEdgeLevel = (UINT16) (mProtectedModeEdgeLevel & ~(1 << Irq));
}
Interrupt8259WriteMask (mProtectedModeMask, mProtectedModeEdgeLevel);
return EFI_SUCCESS;
}
/**
Disables the specified IRQ.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] Irq IRQ0-IRQ15.
@retval EFI_SUCCESS The Irq was disabled on the 8259 PIC.
@retval EFI_INVALID_PARAMETER The Irq is not valid.
**/
EFI_STATUS
EFIAPI
Interrupt8259DisableIrq (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN EFI_8259_IRQ Irq
)
{
if (Irq < Efi8259Irq0 || Irq > Efi8259Irq15) {
return EFI_INVALID_PARAMETER;
}
mProtectedModeMask = (UINT16) (mProtectedModeMask | (1 << Irq));
mProtectedModeEdgeLevel = (UINT16) (mProtectedModeEdgeLevel & ~(1 << Irq));
Interrupt8259WriteMask (mProtectedModeMask, mProtectedModeEdgeLevel);
return EFI_SUCCESS;
}
/**
Reads the PCI configuration space to get the interrupt number that is assigned to the card.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] PciHandle PCI function for which to return the vector.
@param[out] Vector IRQ number that corresponds to the interrupt line.
@retval EFI_SUCCESS The interrupt line value was read successfully.
**/
EFI_STATUS
EFIAPI
Interrupt8259GetInterruptLine (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN EFI_HANDLE PciHandle,
OUT UINT8 *Vector
)
{
EFI_PCI_IO_PROTOCOL *PciIo;
UINT8 InterruptLine;
EFI_STATUS Status;
Status = gBS->HandleProtocol (
PciHandle,
&gEfiPciIoProtocolGuid,
(VOID **) &PciIo
);
if (EFI_ERROR (Status)) {
return EFI_INVALID_PARAMETER;
}
PciIo->Pci.Read (
PciIo,
EfiPciIoWidthUint8,
PCI_INT_LINE_OFFSET,
1,
&InterruptLine
);
//
// Interrupt line is same location for standard PCI cards, standard
// bridge and CardBus bridge.
//
*Vector = InterruptLine;
return EFI_SUCCESS;
}
/**
Issues the End of Interrupt (EOI) commands to PICs.
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance.
@param[in] Irq The interrupt for which to issue the EOI command.
@retval EFI_SUCCESS The EOI command was issued.
@retval EFI_INVALID_PARAMETER The Irq is not valid.
**/
EFI_STATUS
EFIAPI
Interrupt8259EndOfInterrupt (
IN EFI_LEGACY_8259_PROTOCOL *This,
IN EFI_8259_IRQ Irq
)
{
if (Irq < Efi8259Irq0 || Irq > Efi8259Irq15) {
return EFI_INVALID_PARAMETER;
}
if (Irq >= Efi8259Irq8) {
IoWrite8 (LEGACY_8259_CONTROL_REGISTER_SLAVE, LEGACY_8259_EOI);
}
IoWrite8 (LEGACY_8259_CONTROL_REGISTER_MASTER, LEGACY_8259_EOI);
return EFI_SUCCESS;
}
/**
Driver Entry point.
@param[in] ImageHandle ImageHandle of the loaded driver.
@param[in] SystemTable Pointer to the EFI System Table.
@retval EFI_SUCCESS One or more of the drivers returned a success code.
@retval !EFI_SUCCESS Error installing Legacy 8259 Protocol.
**/
EFI_STATUS
EFIAPI
Install8259 (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
EFI_8259_IRQ Irq;
//
// Clear all pending interrupt
//
for (Irq = Efi8259Irq0; Irq <= Efi8259Irq15; Irq++) {
Interrupt8259EndOfInterrupt (&m8259, Irq);
}
//
// Set the 8259 Master base to 0x68 and the 8259 Slave base to 0x70
//
Status = Interrupt8259SetVectorBase (&m8259, PROTECTED_MODE_BASE_VECTOR_MASTER, PROTECTED_MODE_BASE_VECTOR_SLAVE);
//
// Set all 8259 interrupts to edge triggered and disabled
//
Interrupt8259WriteMask (mProtectedModeMask, mProtectedModeEdgeLevel);
//
// Install 8259 Protocol onto a new handle
//
Status = gBS->InstallProtocolInterface (
&m8259Handle,
&gEfiLegacy8259ProtocolGuid,
EFI_NATIVE_INTERFACE,
&m8259
);
return Status;
}