audk/OvmfPkg/VirtioScsiDxe/VirtioScsi.c

1519 lines
44 KiB
C
Raw Normal View History

/** @file
This driver produces Extended SCSI Pass Thru Protocol instances for
virtio-scsi devices.
The implementation is basic:
- No hotplug / hot-unplug.
- Although EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru() could be a good match
for multiple in-flight virtio-scsi requests, we stick to synchronous
requests for now.
- Timeouts are not supported for EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru().
- Only one channel is supported. (At the time of this writing, host-side
virtio-scsi supports a single channel too.)
- Only one request queue is used (for the one synchronous request).
- The ResetChannel() and ResetTargetLun() functions of
EFI_EXT_SCSI_PASS_THRU_PROTOCOL are not supported (which is allowed by the
UEFI 2.3.1 Errata C specification), although
VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET could be a good match. That would
however require client code for the control queue, which is deemed
unreasonable for now.
Copyright (C) 2012, Red Hat, Inc.
Copyright (c) 2012 - 2018, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2017, AMD Inc, All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#include <IndustryStandard/VirtioScsi.h>
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
#include <Library/VirtioLib.h>
#include "VirtioScsi.h"
/**
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Convenience macros to read and write configuration elements of the
virtio-scsi VirtIo device.
The following macros make it possible to specify only the "core parameters"
for such accesses and to derive the rest. By the time VIRTIO_CFG_WRITE()
returns, the transaction will have been completed.
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
@param[in] Dev Pointer to the VSCSI_DEV structure.
@param[in] Field A field name from VSCSI_HDR, identifying the virtio-scsi
configuration item to access.
@param[in] Value (VIRTIO_CFG_WRITE() only.) The value to write to the
selected configuration item.
@param[out] Pointer (VIRTIO_CFG_READ() only.) The object to receive the
value read from the configuration item. Its type must be
one of UINT8, UINT16, UINT32, UINT64.
@return Status codes returned by Virtio->WriteDevice() / Virtio->ReadDevice().
**/
#define VIRTIO_CFG_WRITE(Dev, Field, Value) ((Dev)->VirtIo->WriteDevice ( \
(Dev)->VirtIo, \
OFFSET_OF_VSCSI (Field), \
SIZE_OF_VSCSI (Field), \
(Value) \
))
#define VIRTIO_CFG_READ(Dev, Field, Pointer) ((Dev)->VirtIo->ReadDevice ( \
(Dev)->VirtIo, \
OFFSET_OF_VSCSI (Field), \
SIZE_OF_VSCSI (Field), \
sizeof *(Pointer), \
(Pointer) \
))
//
// UEFI Spec 2.3.1 + Errata C, 14.7 Extended SCSI Pass Thru Protocol specifies
// the PassThru() interface. Beside returning a status code, the function must
// set some fields in the EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET in/out
// parameter on return. The following is a full list of those fields, for
// easier validation of PopulateRequest(), ParseResponse(), and
// ReportHostAdapterError() below.
//
// - InTransferLength
// - OutTransferLength
// - HostAdapterStatus
// - TargetStatus
// - SenseDataLength
// - SenseData
//
// On any return from the PassThru() interface, these fields must be set,
// except if the returned status code is explicitly exempt. (Actually the
// implementation here conservatively sets these fields even in case not all
// of them would be required by the specification.)
//
/**
Populate a virtio-scsi request from the Extended SCSI Pass Thru Protocol
packet.
The caller is responsible for pre-zeroing the virtio-scsi request. The
Extended SCSI Pass Thru Protocol packet is modified, to be forwarded outwards
by VirtioScsiPassThru(), if invalid or unsupported parameters are detected.
@param[in] Dev The virtio-scsi host device the packet targets.
@param[in] Target The SCSI target controlled by the virtio-scsi host
device.
@param[in] Lun The Logical Unit Number under the SCSI target.
@param[in out] Packet The Extended SCSI Pass Thru Protocol packet the
function translates to a virtio-scsi request. On
failure this parameter relays error contents.
@param[out] Request The pre-zeroed virtio-scsi request to populate. This
parameter is volatile-qualified because we expect the
caller to append it to a virtio ring, thus
assignments to Request must be visible when the
function returns.
@retval EFI_SUCCESS The Extended SCSI Pass Thru Protocol packet was valid,
Request has been populated.
@return Otherwise, invalid or unsupported parameters were
detected. Status codes are meant for direct forwarding
by the EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru()
implementation.
**/
STATIC
EFI_STATUS
EFIAPI
PopulateRequest (
IN CONST VSCSI_DEV *Dev,
IN UINT16 Target,
IN UINT64 Lun,
IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
OUT volatile VIRTIO_SCSI_REQ *Request
)
{
UINTN Idx;
if (
//
// bidirectional transfer was requested, but the host doesn't support it
//
(Packet->InTransferLength > 0 && Packet->OutTransferLength > 0 &&
!Dev->InOutSupported) ||
//
// a target / LUN was addressed that's impossible to encode for the host
//
Target > 0xFF || Lun >= 0x4000 ||
//
// Command Descriptor Block bigger than VIRTIO_SCSI_CDB_SIZE
//
Packet->CdbLength > VIRTIO_SCSI_CDB_SIZE ||
//
// From virtio-0.9.5, 2.3.2 Descriptor Table:
// "no descriptor chain may be more than 2^32 bytes long in total".
//
(UINT64) Packet->InTransferLength + Packet->OutTransferLength > SIZE_1GB
) {
//
// this error code doesn't require updates to the Packet output fields
//
return EFI_UNSUPPORTED;
}
if (
//
// addressed invalid device
//
Target > Dev->MaxTarget || Lun > Dev->MaxLun ||
//
// invalid direction (there doesn't seem to be a macro for the "no data
// transferred" "direction", eg. for TEST UNIT READY)
//
Packet->DataDirection > EFI_EXT_SCSI_DATA_DIRECTION_BIDIRECTIONAL ||
//
// trying to receive, but destination pointer is NULL, or contradicting
// transfer direction
//
(Packet->InTransferLength > 0 &&
(Packet->InDataBuffer == NULL ||
Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_WRITE
)
) ||
//
// trying to send, but source pointer is NULL, or contradicting transfer
// direction
//
(Packet->OutTransferLength > 0 &&
(Packet->OutDataBuffer == NULL ||
Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ
)
)
) {
//
// this error code doesn't require updates to the Packet output fields
//
return EFI_INVALID_PARAMETER;
}
//
// Catch oversized requests eagerly. If this condition evaluates to false,
// then the combined size of a bidirectional request will not exceed the
// virtio-scsi device's transfer limit either.
//
if (ALIGN_VALUE (Packet->OutTransferLength, 512) / 512
> Dev->MaxSectors / 2 ||
ALIGN_VALUE (Packet->InTransferLength, 512) / 512
> Dev->MaxSectors / 2) {
Packet->InTransferLength = (Dev->MaxSectors / 2) * 512;
Packet->OutTransferLength = (Dev->MaxSectors / 2) * 512;
Packet->HostAdapterStatus =
EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN;
Packet->TargetStatus = EFI_EXT_SCSI_STATUS_TARGET_GOOD;
Packet->SenseDataLength = 0;
return EFI_BAD_BUFFER_SIZE;
}
//
// target & LUN encoding: see virtio-0.9.5, Appendix I: SCSI Host Device,
// Device Operation: request queues
//
Request->Lun[0] = 1;
Request->Lun[1] = (UINT8) Target;
Request->Lun[2] = (UINT8) (((UINT32)Lun >> 8) | 0x40);
Request->Lun[3] = (UINT8) Lun;
//
// CopyMem() would cast away the "volatile" qualifier before access, which is
// undefined behavior (ISO C99 6.7.3p5)
//
for (Idx = 0; Idx < Packet->CdbLength; ++Idx) {
Request->Cdb[Idx] = ((UINT8 *) Packet->Cdb)[Idx];
}
return EFI_SUCCESS;
}
/**
Parse the virtio-scsi device's response, translate it to an EFI status code,
and update the Extended SCSI Pass Thru Protocol packet, to be returned by
the EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru() implementation.
@param[in out] Packet The Extended SCSI Pass Thru Protocol packet that has
been translated to a virtio-scsi request with
PopulateRequest(), and processed by the host. On
output this parameter is updated with response or
error contents.
@param[in] Response The virtio-scsi response structure to parse. We expect
it to come from a virtio ring, thus it is qualified
volatile.
@return PassThru() status codes mandated by UEFI Spec 2.3.1 + Errata C, 14.7
Extended SCSI Pass Thru Protocol.
**/
STATIC
EFI_STATUS
EFIAPI
ParseResponse (
IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
IN CONST volatile VIRTIO_SCSI_RESP *Response
)
{
UINTN ResponseSenseLen;
UINTN Idx;
//
// return sense data (length and contents) in all cases, truncated if needed
//
ResponseSenseLen = MIN (Response->SenseLen, VIRTIO_SCSI_SENSE_SIZE);
if (Packet->SenseDataLength > ResponseSenseLen) {
Packet->SenseDataLength = (UINT8) ResponseSenseLen;
}
for (Idx = 0; Idx < Packet->SenseDataLength; ++Idx) {
((UINT8 *) Packet->SenseData)[Idx] = Response->Sense[Idx];
}
//
// Report actual transfer lengths. The logic below covers all three
// DataDirections (read, write, bidirectional).
//
// -+- @ 0
// |
// | write ^ @ Residual (unprocessed)
// | |
// -+- @ OutTransferLength -+- @ InTransferLength
// | |
// | read |
// | |
// V @ OutTransferLength + InTransferLength -+- @ 0
//
if (Response->Residual <= Packet->InTransferLength) {
Packet->InTransferLength -= Response->Residual;
}
else {
Packet->OutTransferLength -= Response->Residual - Packet->InTransferLength;
Packet->InTransferLength = 0;
}
//
// report target status in all cases
//
Packet->TargetStatus = Response->Status;
//
// host adapter status and function return value depend on virtio-scsi
// response code
//
switch (Response->Response) {
case VIRTIO_SCSI_S_OK:
Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_OK;
return EFI_SUCCESS;
case VIRTIO_SCSI_S_OVERRUN:
Packet->HostAdapterStatus =
EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN;
break;
case VIRTIO_SCSI_S_BAD_TARGET:
//
// This is non-intuitive but explicitly required by the
// EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru() specification for
// disconnected (but otherwise valid) target / LUN addresses.
//
Packet->HostAdapterStatus =
EFI_EXT_SCSI_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND;
return EFI_TIMEOUT;
case VIRTIO_SCSI_S_RESET:
Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_BUS_RESET;
break;
case VIRTIO_SCSI_S_BUSY:
Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_OK;
return EFI_NOT_READY;
//
// Lump together the rest. The mapping for VIRTIO_SCSI_S_ABORTED is
// intentional as well, not an oversight.
//
case VIRTIO_SCSI_S_ABORTED:
case VIRTIO_SCSI_S_TRANSPORT_FAILURE:
case VIRTIO_SCSI_S_TARGET_FAILURE:
case VIRTIO_SCSI_S_NEXUS_FAILURE:
case VIRTIO_SCSI_S_FAILURE:
default:
Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_OTHER;
}
return EFI_DEVICE_ERROR;
}
/**
The function can be used to create a fake host adapter error.
When VirtioScsiPassThru() is failed due to some reasons then this function
can be called to construct a host adapter error.
@param[out] Packet The Extended SCSI Pass Thru Protocol packet that the host
adapter error shall be placed in.
@retval EFI_DEVICE_ERROR The function returns this status code
unconditionally, to be propagated by
VirtioScsiPassThru().
**/
STATIC
EFI_STATUS
ReportHostAdapterError (
OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet
)
{
Packet->InTransferLength = 0;
Packet->OutTransferLength = 0;
Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_OTHER;
Packet->TargetStatus = EFI_EXT_SCSI_STATUS_TARGET_GOOD;
Packet->SenseDataLength = 0;
return EFI_DEVICE_ERROR;
}
//
// The next seven functions implement EFI_EXT_SCSI_PASS_THRU_PROTOCOL
// for the virtio-scsi HBA. Refer to UEFI Spec 2.3.1 + Errata C, sections
// - 14.1 SCSI Driver Model Overview,
// - 14.7 Extended SCSI Pass Thru Protocol.
//
EFI_STATUS
EFIAPI
VirtioScsiPassThru (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN UINT8 *Target,
IN UINT64 Lun,
IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
IN EFI_EVENT Event OPTIONAL
)
{
VSCSI_DEV *Dev;
UINT16 TargetValue;
EFI_STATUS Status;
volatile VIRTIO_SCSI_REQ Request;
OvmfPkg/VirtioScsiDxe: map virtio-scsi request and response buffers When device is behind the IOMMU, driver is require to pass the device address of virtio request, response and any memory referenced by those request/response to the bus master. The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to map request and response buffers system physical address to the device address. - If the buffer need to be accessed by both the processor and a bus master then map with BusMasterCommonBuffer. - If the buffer need to be accessed for a write operation by a bus master then map with BusMasterWrite. However, after a BusMasterWrite Unmap() failure, error reporting via EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex, therefore we map such buffers too with BusMasterCommonBuffer. - If the buffer need to be accessed for a read operation by a bus master then map with BusMasterRead. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: restore lost sentence/paragraph in commit message] [lersek@redhat.com: reindent/reflow "InDataBuffer" comment block] [lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-31 16:25:27 +02:00
volatile VIRTIO_SCSI_RESP *Response;
VOID *ResponseBuffer;
DESC_INDICES Indices;
OvmfPkg/VirtioScsiDxe: map virtio-scsi request and response buffers When device is behind the IOMMU, driver is require to pass the device address of virtio request, response and any memory referenced by those request/response to the bus master. The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to map request and response buffers system physical address to the device address. - If the buffer need to be accessed by both the processor and a bus master then map with BusMasterCommonBuffer. - If the buffer need to be accessed for a write operation by a bus master then map with BusMasterWrite. However, after a BusMasterWrite Unmap() failure, error reporting via EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex, therefore we map such buffers too with BusMasterCommonBuffer. - If the buffer need to be accessed for a read operation by a bus master then map with BusMasterRead. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: restore lost sentence/paragraph in commit message] [lersek@redhat.com: reindent/reflow "InDataBuffer" comment block] [lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-31 16:25:27 +02:00
VOID *RequestMapping;
VOID *ResponseMapping;
VOID *InDataMapping;
VOID *OutDataMapping;
EFI_PHYSICAL_ADDRESS RequestDeviceAddress;
EFI_PHYSICAL_ADDRESS ResponseDeviceAddress;
EFI_PHYSICAL_ADDRESS InDataDeviceAddress;
EFI_PHYSICAL_ADDRESS OutDataDeviceAddress;
VOID *InDataBuffer;
UINTN InDataNumPages;
BOOLEAN OutDataBufferIsMapped;
//
// Set InDataMapping,OutDataMapping,InDataDeviceAddress and OutDataDeviceAddress to
// suppress incorrect compiler/analyzer warnings.
//
InDataMapping = NULL;
OutDataMapping = NULL;
InDataDeviceAddress = 0;
OutDataDeviceAddress = 0;
ZeroMem ((VOID*) &Request, sizeof (Request));
Dev = VIRTIO_SCSI_FROM_PASS_THRU (This);
CopyMem (&TargetValue, Target, sizeof TargetValue);
OvmfPkg/VirtioScsiDxe: map virtio-scsi request and response buffers When device is behind the IOMMU, driver is require to pass the device address of virtio request, response and any memory referenced by those request/response to the bus master. The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to map request and response buffers system physical address to the device address. - If the buffer need to be accessed by both the processor and a bus master then map with BusMasterCommonBuffer. - If the buffer need to be accessed for a write operation by a bus master then map with BusMasterWrite. However, after a BusMasterWrite Unmap() failure, error reporting via EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex, therefore we map such buffers too with BusMasterCommonBuffer. - If the buffer need to be accessed for a read operation by a bus master then map with BusMasterRead. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: restore lost sentence/paragraph in commit message] [lersek@redhat.com: reindent/reflow "InDataBuffer" comment block] [lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-31 16:25:27 +02:00
InDataBuffer = NULL;
OutDataBufferIsMapped = FALSE;
InDataNumPages = 0;
Status = PopulateRequest (Dev, TargetValue, Lun, Packet, &Request);
if (EFI_ERROR (Status)) {
return Status;
}
OvmfPkg/VirtioScsiDxe: map virtio-scsi request and response buffers When device is behind the IOMMU, driver is require to pass the device address of virtio request, response and any memory referenced by those request/response to the bus master. The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to map request and response buffers system physical address to the device address. - If the buffer need to be accessed by both the processor and a bus master then map with BusMasterCommonBuffer. - If the buffer need to be accessed for a write operation by a bus master then map with BusMasterWrite. However, after a BusMasterWrite Unmap() failure, error reporting via EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex, therefore we map such buffers too with BusMasterCommonBuffer. - If the buffer need to be accessed for a read operation by a bus master then map with BusMasterRead. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: restore lost sentence/paragraph in commit message] [lersek@redhat.com: reindent/reflow "InDataBuffer" comment block] [lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-31 16:25:27 +02:00
//
// Map the virtio-scsi Request header buffer
//
Status = VirtioMapAllBytesInSharedBuffer (
Dev->VirtIo,
VirtioOperationBusMasterRead,
(VOID *) &Request,
sizeof Request,
&RequestDeviceAddress,
&RequestMapping);
if (EFI_ERROR (Status)) {
return ReportHostAdapterError (Packet);
}
//
// Map the input buffer
//
if (Packet->InTransferLength > 0) {
//
// Allocate a intermediate input buffer. This is mainly to handle the
// following case:
// * caller submits a bi-directional request
// * we perform the request fine
// * but we fail to unmap the "InDataMapping"
//
// In that case simply returning the EFI_DEVICE_ERROR is not sufficient. In
OvmfPkg/VirtioScsiDxe: map virtio-scsi request and response buffers When device is behind the IOMMU, driver is require to pass the device address of virtio request, response and any memory referenced by those request/response to the bus master. The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to map request and response buffers system physical address to the device address. - If the buffer need to be accessed by both the processor and a bus master then map with BusMasterCommonBuffer. - If the buffer need to be accessed for a write operation by a bus master then map with BusMasterWrite. However, after a BusMasterWrite Unmap() failure, error reporting via EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex, therefore we map such buffers too with BusMasterCommonBuffer. - If the buffer need to be accessed for a read operation by a bus master then map with BusMasterRead. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: restore lost sentence/paragraph in commit message] [lersek@redhat.com: reindent/reflow "InDataBuffer" comment block] [lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-31 16:25:27 +02:00
// addition to the error code we also need to update Packet fields
// accordingly so that we report the full loss of the incoming transfer.
//
// We allocate a temporary buffer and map it with BusMasterCommonBuffer. If
// the Virtio request is successful then we copy the data from temporary
// buffer into Packet->InDataBuffer.
//
InDataNumPages = EFI_SIZE_TO_PAGES ((UINTN)Packet->InTransferLength);
Status = Dev->VirtIo->AllocateSharedPages (
Dev->VirtIo,
InDataNumPages,
&InDataBuffer
);
if (EFI_ERROR (Status)) {
Status = ReportHostAdapterError (Packet);
goto UnmapRequestBuffer;
}
ZeroMem (InDataBuffer, Packet->InTransferLength);
Status = VirtioMapAllBytesInSharedBuffer (
Dev->VirtIo,
VirtioOperationBusMasterCommonBuffer,
InDataBuffer,
Packet->InTransferLength,
&InDataDeviceAddress,
&InDataMapping
);
if (EFI_ERROR (Status)) {
Status = ReportHostAdapterError (Packet);
goto FreeInDataBuffer;
}
}
//
// Map the output buffer
//
if (Packet->OutTransferLength > 0) {
Status = VirtioMapAllBytesInSharedBuffer (
Dev->VirtIo,
VirtioOperationBusMasterRead,
Packet->OutDataBuffer,
Packet->OutTransferLength,
&OutDataDeviceAddress,
&OutDataMapping
);
if (EFI_ERROR (Status)) {
Status = ReportHostAdapterError (Packet);
goto UnmapInDataBuffer;
}
OutDataBufferIsMapped = TRUE;
}
//
// Response header is bi-direction (we preset with host status and expect
// the device to update it). Allocate a response buffer which can be mapped
// to access equally by both processor and device.
//
Status = Dev->VirtIo->AllocateSharedPages (
Dev->VirtIo,
EFI_SIZE_TO_PAGES (sizeof *Response),
&ResponseBuffer
);
if (EFI_ERROR (Status)) {
Status = ReportHostAdapterError (Packet);
goto UnmapOutDataBuffer;
}
Response = ResponseBuffer;
ZeroMem ((VOID *)Response, sizeof (*Response));
//
// preset a host status for ourselves that we do not accept as success
//
OvmfPkg/VirtioScsiDxe: map virtio-scsi request and response buffers When device is behind the IOMMU, driver is require to pass the device address of virtio request, response and any memory referenced by those request/response to the bus master. The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to map request and response buffers system physical address to the device address. - If the buffer need to be accessed by both the processor and a bus master then map with BusMasterCommonBuffer. - If the buffer need to be accessed for a write operation by a bus master then map with BusMasterWrite. However, after a BusMasterWrite Unmap() failure, error reporting via EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex, therefore we map such buffers too with BusMasterCommonBuffer. - If the buffer need to be accessed for a read operation by a bus master then map with BusMasterRead. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: restore lost sentence/paragraph in commit message] [lersek@redhat.com: reindent/reflow "InDataBuffer" comment block] [lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-31 16:25:27 +02:00
Response->Response = VIRTIO_SCSI_S_FAILURE;
//
// Map the response buffer with BusMasterCommonBuffer so that response
// buffer can be accessed by both host and device.
//
Status = VirtioMapAllBytesInSharedBuffer (
Dev->VirtIo,
VirtioOperationBusMasterCommonBuffer,
ResponseBuffer,
sizeof (*Response),
&ResponseDeviceAddress,
&ResponseMapping
);
if (EFI_ERROR (Status)) {
Status = ReportHostAdapterError (Packet);
goto FreeResponseBuffer;
}
VirtioPrepare (&Dev->Ring, &Indices);
//
// ensured by VirtioScsiInit() -- this predicate, in combination with the
// lock-step progress, ensures we don't have to track free descriptors.
//
ASSERT (Dev->Ring.QueueSize >= 4);
//
// enqueue Request
//
OvmfPkg/VirtioScsiDxe: map virtio-scsi request and response buffers When device is behind the IOMMU, driver is require to pass the device address of virtio request, response and any memory referenced by those request/response to the bus master. The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to map request and response buffers system physical address to the device address. - If the buffer need to be accessed by both the processor and a bus master then map with BusMasterCommonBuffer. - If the buffer need to be accessed for a write operation by a bus master then map with BusMasterWrite. However, after a BusMasterWrite Unmap() failure, error reporting via EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex, therefore we map such buffers too with BusMasterCommonBuffer. - If the buffer need to be accessed for a read operation by a bus master then map with BusMasterRead. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: restore lost sentence/paragraph in commit message] [lersek@redhat.com: reindent/reflow "InDataBuffer" comment block] [lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-31 16:25:27 +02:00
VirtioAppendDesc (
&Dev->Ring,
RequestDeviceAddress,
sizeof Request,
VRING_DESC_F_NEXT,
&Indices
);
//
// enqueue "dataout" if any
//
if (Packet->OutTransferLength > 0) {
OvmfPkg/VirtioScsiDxe: map virtio-scsi request and response buffers When device is behind the IOMMU, driver is require to pass the device address of virtio request, response and any memory referenced by those request/response to the bus master. The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to map request and response buffers system physical address to the device address. - If the buffer need to be accessed by both the processor and a bus master then map with BusMasterCommonBuffer. - If the buffer need to be accessed for a write operation by a bus master then map with BusMasterWrite. However, after a BusMasterWrite Unmap() failure, error reporting via EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex, therefore we map such buffers too with BusMasterCommonBuffer. - If the buffer need to be accessed for a read operation by a bus master then map with BusMasterRead. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: restore lost sentence/paragraph in commit message] [lersek@redhat.com: reindent/reflow "InDataBuffer" comment block] [lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-31 16:25:27 +02:00
VirtioAppendDesc (
&Dev->Ring,
OutDataDeviceAddress,
Packet->OutTransferLength,
VRING_DESC_F_NEXT,
&Indices
);
}
//
// enqueue Response, to be written by the host
//
OvmfPkg/VirtioScsiDxe: map virtio-scsi request and response buffers When device is behind the IOMMU, driver is require to pass the device address of virtio request, response and any memory referenced by those request/response to the bus master. The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to map request and response buffers system physical address to the device address. - If the buffer need to be accessed by both the processor and a bus master then map with BusMasterCommonBuffer. - If the buffer need to be accessed for a write operation by a bus master then map with BusMasterWrite. However, after a BusMasterWrite Unmap() failure, error reporting via EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex, therefore we map such buffers too with BusMasterCommonBuffer. - If the buffer need to be accessed for a read operation by a bus master then map with BusMasterRead. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: restore lost sentence/paragraph in commit message] [lersek@redhat.com: reindent/reflow "InDataBuffer" comment block] [lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-31 16:25:27 +02:00
VirtioAppendDesc (
&Dev->Ring,
ResponseDeviceAddress,
sizeof *Response,
VRING_DESC_F_WRITE | (Packet->InTransferLength > 0 ? VRING_DESC_F_NEXT : 0),
&Indices
);
//
// enqueue "datain" if any, to be written by the host
//
if (Packet->InTransferLength > 0) {
OvmfPkg/VirtioScsiDxe: map virtio-scsi request and response buffers When device is behind the IOMMU, driver is require to pass the device address of virtio request, response and any memory referenced by those request/response to the bus master. The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to map request and response buffers system physical address to the device address. - If the buffer need to be accessed by both the processor and a bus master then map with BusMasterCommonBuffer. - If the buffer need to be accessed for a write operation by a bus master then map with BusMasterWrite. However, after a BusMasterWrite Unmap() failure, error reporting via EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex, therefore we map such buffers too with BusMasterCommonBuffer. - If the buffer need to be accessed for a read operation by a bus master then map with BusMasterRead. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: restore lost sentence/paragraph in commit message] [lersek@redhat.com: reindent/reflow "InDataBuffer" comment block] [lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-31 16:25:27 +02:00
VirtioAppendDesc (
&Dev->Ring,
InDataDeviceAddress,
Packet->InTransferLength,
VRING_DESC_F_WRITE,
&Indices
);
}
// If kicking the host fails, we must fake a host adapter error.
// EFI_NOT_READY would save us the effort, but it would also suggest that the
// caller retry.
//
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
if (VirtioFlush (Dev->VirtIo, VIRTIO_SCSI_REQUEST_QUEUE, &Dev->Ring,
OvmfPkg: VirtioFlush(): return the number of bytes written by the host VirtioLib provides an API for simple, synchronous (request/response-style) virtio communication. The guest driver builds one descriptor chain, link for link, with VirtioPrepare() and VirtioAppendDesc(), then submits the chain, and awaits the processing, with VirtioFlush(). The descriptor chain is always built at the beginning of the descriptor area, with the head descriptor having descriptor index 0. In order to submit the descriptor chain to the host, the guest always pushes a new "available element" to the Available Ring, in genuine queue-like fashion, with the new element referencing the head descriptor (which always has index 0, see above). In turn, after processing, the host always pushes a new "used element" to the Used Ring, in genuine queue-like fashion, with the new element referencing the head descriptor of the chain that was just processed. The same element also reports the number of bytes that the host wrote, consecutively across the host-writeable buffers that were linked by the descriptors. (See "OvmfPkg/VirtioNetDxe/TechNotes.txt" for a diagram about the descriptor area and the rings.) Because at most one descriptor chain can be in flight with VirtioLib at any time, - the Available Ring and the Used Ring proceed in lock-step, - and the head descriptor that the new "available" and "used" elements can ever reference has index 0. Based on the above, we can modify VirtioFlush() to return the number of bytes written by the host across the descriptor chain. The virtio-block and virtio-scsi drivers don't care (they have other ways to parse the data produced by the host), while the virtio-net driver doesn't use VirtioFlush() at all (it employs VirtioLib only to set up its rings). However, the virtio entropy device, to be covered in the upcoming patches, reports the amount of randomness produced by the host only through this quantity. Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-02-19 18:15:07 +01:00
&Indices, NULL) != EFI_SUCCESS) {
OvmfPkg/VirtioScsiDxe: map virtio-scsi request and response buffers When device is behind the IOMMU, driver is require to pass the device address of virtio request, response and any memory referenced by those request/response to the bus master. The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to map request and response buffers system physical address to the device address. - If the buffer need to be accessed by both the processor and a bus master then map with BusMasterCommonBuffer. - If the buffer need to be accessed for a write operation by a bus master then map with BusMasterWrite. However, after a BusMasterWrite Unmap() failure, error reporting via EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex, therefore we map such buffers too with BusMasterCommonBuffer. - If the buffer need to be accessed for a read operation by a bus master then map with BusMasterRead. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: restore lost sentence/paragraph in commit message] [lersek@redhat.com: reindent/reflow "InDataBuffer" comment block] [lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-31 16:25:27 +02:00
Status = ReportHostAdapterError (Packet);
goto UnmapResponseBuffer;
}
OvmfPkg/VirtioScsiDxe: map virtio-scsi request and response buffers When device is behind the IOMMU, driver is require to pass the device address of virtio request, response and any memory referenced by those request/response to the bus master. The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to map request and response buffers system physical address to the device address. - If the buffer need to be accessed by both the processor and a bus master then map with BusMasterCommonBuffer. - If the buffer need to be accessed for a write operation by a bus master then map with BusMasterWrite. However, after a BusMasterWrite Unmap() failure, error reporting via EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex, therefore we map such buffers too with BusMasterCommonBuffer. - If the buffer need to be accessed for a read operation by a bus master then map with BusMasterRead. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: restore lost sentence/paragraph in commit message] [lersek@redhat.com: reindent/reflow "InDataBuffer" comment block] [lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-31 16:25:27 +02:00
Status = ParseResponse (Packet, Response);
//
// If virtio request was successful and it was a CPU read request then we
// have used an intermediate buffer. Copy the data from intermediate buffer
// to the final buffer.
//
if (InDataBuffer != NULL) {
CopyMem (Packet->InDataBuffer, InDataBuffer, Packet->InTransferLength);
}
UnmapResponseBuffer:
Dev->VirtIo->UnmapSharedBuffer (Dev->VirtIo, ResponseMapping);
FreeResponseBuffer:
Dev->VirtIo->FreeSharedPages (
Dev->VirtIo,
EFI_SIZE_TO_PAGES (sizeof *Response),
ResponseBuffer
);
UnmapOutDataBuffer:
if (OutDataBufferIsMapped) {
Dev->VirtIo->UnmapSharedBuffer (Dev->VirtIo, OutDataMapping);
}
UnmapInDataBuffer:
if (InDataBuffer != NULL) {
Dev->VirtIo->UnmapSharedBuffer (Dev->VirtIo, InDataMapping);
}
FreeInDataBuffer:
if (InDataBuffer != NULL) {
Dev->VirtIo->FreeSharedPages (Dev->VirtIo, InDataNumPages, InDataBuffer);
}
UnmapRequestBuffer:
Dev->VirtIo->UnmapSharedBuffer (Dev->VirtIo, RequestMapping);
return Status;
}
EFI_STATUS
EFIAPI
VirtioScsiGetNextTargetLun (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN OUT UINT8 **TargetPointer,
IN OUT UINT64 *Lun
)
{
UINT8 *Target;
UINTN Idx;
UINT16 LastTarget;
VSCSI_DEV *Dev;
//
// the TargetPointer input parameter is unnecessarily a pointer-to-pointer
//
Target = *TargetPointer;
//
// Search for first non-0xFF byte. If not found, return first target & LUN.
//
for (Idx = 0; Idx < TARGET_MAX_BYTES && Target[Idx] == 0xFF; ++Idx)
;
if (Idx == TARGET_MAX_BYTES) {
SetMem (Target, TARGET_MAX_BYTES, 0x00);
*Lun = 0;
return EFI_SUCCESS;
}
//
// see the TARGET_MAX_BYTES check in "VirtioScsi.h"
//
CopyMem (&LastTarget, Target, sizeof LastTarget);
//
// increment (target, LUN) pair if valid on input
//
Dev = VIRTIO_SCSI_FROM_PASS_THRU (This);
if (LastTarget > Dev->MaxTarget || *Lun > Dev->MaxLun) {
return EFI_INVALID_PARAMETER;
}
if (*Lun < Dev->MaxLun) {
++*Lun;
return EFI_SUCCESS;
}
if (LastTarget < Dev->MaxTarget) {
*Lun = 0;
++LastTarget;
CopyMem (Target, &LastTarget, sizeof LastTarget);
return EFI_SUCCESS;
}
return EFI_NOT_FOUND;
}
EFI_STATUS
EFIAPI
VirtioScsiBuildDevicePath (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN UINT8 *Target,
IN UINT64 Lun,
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
)
{
UINT16 TargetValue;
VSCSI_DEV *Dev;
SCSI_DEVICE_PATH *ScsiDevicePath;
if (DevicePath == NULL) {
return EFI_INVALID_PARAMETER;
}
CopyMem (&TargetValue, Target, sizeof TargetValue);
Dev = VIRTIO_SCSI_FROM_PASS_THRU (This);
if (TargetValue > Dev->MaxTarget || Lun > Dev->MaxLun || Lun > 0xFFFF) {
return EFI_NOT_FOUND;
}
ScsiDevicePath = AllocatePool (sizeof *ScsiDevicePath);
if (ScsiDevicePath == NULL) {
return EFI_OUT_OF_RESOURCES;
}
ScsiDevicePath->Header.Type = MESSAGING_DEVICE_PATH;
ScsiDevicePath->Header.SubType = MSG_SCSI_DP;
ScsiDevicePath->Header.Length[0] = (UINT8) sizeof *ScsiDevicePath;
ScsiDevicePath->Header.Length[1] = (UINT8) (sizeof *ScsiDevicePath >> 8);
ScsiDevicePath->Pun = TargetValue;
ScsiDevicePath->Lun = (UINT16) Lun;
*DevicePath = &ScsiDevicePath->Header;
return EFI_SUCCESS;
}
EFI_STATUS
EFIAPI
VirtioScsiGetTargetLun (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
OUT UINT8 **TargetPointer,
OUT UINT64 *Lun
)
{
SCSI_DEVICE_PATH *ScsiDevicePath;
VSCSI_DEV *Dev;
UINT8 *Target;
if (DevicePath == NULL || TargetPointer == NULL || *TargetPointer == NULL ||
Lun == NULL) {
return EFI_INVALID_PARAMETER;
}
if (DevicePath->Type != MESSAGING_DEVICE_PATH ||
DevicePath->SubType != MSG_SCSI_DP) {
return EFI_UNSUPPORTED;
}
ScsiDevicePath = (SCSI_DEVICE_PATH *) DevicePath;
Dev = VIRTIO_SCSI_FROM_PASS_THRU (This);
if (ScsiDevicePath->Pun > Dev->MaxTarget ||
ScsiDevicePath->Lun > Dev->MaxLun) {
return EFI_NOT_FOUND;
}
//
// a) the TargetPointer input parameter is unnecessarily a pointer-to-pointer
// b) see the TARGET_MAX_BYTES check in "VirtioScsi.h"
// c) ScsiDevicePath->Pun is an UINT16
//
Target = *TargetPointer;
CopyMem (Target, &ScsiDevicePath->Pun, 2);
SetMem (Target + 2, TARGET_MAX_BYTES - 2, 0x00);
*Lun = ScsiDevicePath->Lun;
return EFI_SUCCESS;
}
EFI_STATUS
EFIAPI
VirtioScsiResetChannel (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This
)
{
return EFI_UNSUPPORTED;
}
EFI_STATUS
EFIAPI
VirtioScsiResetTargetLun (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN UINT8 *Target,
IN UINT64 Lun
)
{
return EFI_UNSUPPORTED;
}
EFI_STATUS
EFIAPI
VirtioScsiGetNextTarget (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN OUT UINT8 **TargetPointer
)
{
UINT8 *Target;
UINTN Idx;
UINT16 LastTarget;
VSCSI_DEV *Dev;
//
// the TargetPointer input parameter is unnecessarily a pointer-to-pointer
//
Target = *TargetPointer;
//
// Search for first non-0xFF byte. If not found, return first target.
//
for (Idx = 0; Idx < TARGET_MAX_BYTES && Target[Idx] == 0xFF; ++Idx)
;
if (Idx == TARGET_MAX_BYTES) {
SetMem (Target, TARGET_MAX_BYTES, 0x00);
return EFI_SUCCESS;
}
//
// see the TARGET_MAX_BYTES check in "VirtioScsi.h"
//
CopyMem (&LastTarget, Target, sizeof LastTarget);
//
// increment target if valid on input
//
Dev = VIRTIO_SCSI_FROM_PASS_THRU (This);
if (LastTarget > Dev->MaxTarget) {
return EFI_INVALID_PARAMETER;
}
if (LastTarget < Dev->MaxTarget) {
++LastTarget;
CopyMem (Target, &LastTarget, sizeof LastTarget);
return EFI_SUCCESS;
}
return EFI_NOT_FOUND;
}
STATIC
EFI_STATUS
EFIAPI
VirtioScsiInit (
IN OUT VSCSI_DEV *Dev
)
{
UINT8 NextDevStat;
EFI_STATUS Status;
UINT64 RingBaseShift;
OvmfPkg: VIRTIO_DEVICE_PROTOCOL: widen the Features bitmap to 64 bits The virtio-1.0 spec widens the Features bitmap to 64 bits. Modify the declarations of the GetDeviceFeatures() and SetGuestFeatures() protocol member functions accordingly. Normally, a protocol cannot be changed in incompatible ways if the GUID stays the same; however, we've always been extremely clear that VIRTIO_DEVICE_PROTOCOL is internal to edk2. See for example the top of "OvmfPkg/Include/Protocol/VirtioDevice.h". In this patch, all producers and consumers of the GetDeviceFeatures() and SetGuestFeatures() protocol members are updated. The drivers that currently produce these members are "legacy" drivers (in virtio-1.0 terminology), and they cannot (and will not) handle feature bits above BIT31. Therefore their conversion is only for compatibility with the modified protocol interface. The consumers will be responsible for checking the VIRTIO_DEVICE_PROTOCOL.Revision field, and for not passing feature bits that these backends cannot handle. The VirtioMmioGetDeviceFeatures() implementation stores the result of an MmioRead32() call with normal assignment, so it needs no change beyond adapting its prototype. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-03-12 00:58:12 +01:00
UINT64 Features;
UINT16 MaxChannel; // for validation only
UINT32 NumQueues; // for validation only
UINT16 QueueSize;
//
// Execute virtio-0.9.5, 2.2.1 Device Initialization Sequence.
//
NextDevStat = 0; // step 1 -- reset device
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);
if (EFI_ERROR (Status)) {
goto Failed;
}
NextDevStat |= VSTAT_ACK; // step 2 -- acknowledge device presence
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);
if (EFI_ERROR (Status)) {
goto Failed;
}
NextDevStat |= VSTAT_DRIVER; // step 3 -- we know how to drive it
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);
if (EFI_ERROR (Status)) {
goto Failed;
}
//
// Set Page Size - MMIO VirtIo Specific
//
Status = Dev->VirtIo->SetPageSize (Dev->VirtIo, EFI_PAGE_SIZE);
if (EFI_ERROR (Status)) {
goto Failed;
}
//
// step 4a -- retrieve and validate features
//
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = Dev->VirtIo->GetDeviceFeatures (Dev->VirtIo, &Features);
if (EFI_ERROR (Status)) {
goto Failed;
}
Dev->InOutSupported = (BOOLEAN) ((Features & VIRTIO_SCSI_F_INOUT) != 0);
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = VIRTIO_CFG_READ (Dev, MaxChannel, &MaxChannel);
if (EFI_ERROR (Status)) {
goto Failed;
}
if (MaxChannel != 0) {
//
// this driver is for a single-channel virtio-scsi HBA
//
Status = EFI_UNSUPPORTED;
goto Failed;
}
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = VIRTIO_CFG_READ (Dev, NumQueues, &NumQueues);
if (EFI_ERROR (Status)) {
goto Failed;
}
if (NumQueues < 1) {
Status = EFI_UNSUPPORTED;
goto Failed;
}
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = VIRTIO_CFG_READ (Dev, MaxTarget, &Dev->MaxTarget);
if (EFI_ERROR (Status)) {
goto Failed;
}
if (Dev->MaxTarget > PcdGet16 (PcdVirtioScsiMaxTargetLimit)) {
Dev->MaxTarget = PcdGet16 (PcdVirtioScsiMaxTargetLimit);
}
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = VIRTIO_CFG_READ (Dev, MaxLun, &Dev->MaxLun);
if (EFI_ERROR (Status)) {
goto Failed;
}
if (Dev->MaxLun > PcdGet32 (PcdVirtioScsiMaxLunLimit)) {
Dev->MaxLun = PcdGet32 (PcdVirtioScsiMaxLunLimit);
}
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = VIRTIO_CFG_READ (Dev, MaxSectors, &Dev->MaxSectors);
if (EFI_ERROR (Status)) {
goto Failed;
}
if (Dev->MaxSectors < 2) {
//
// We must be able to halve it for bidirectional transfers
// (see EFI_BAD_BUFFER_SIZE in PopulateRequest()).
//
Status = EFI_UNSUPPORTED;
goto Failed;
}
Features &= VIRTIO_SCSI_F_INOUT | VIRTIO_F_VERSION_1 |
VIRTIO_F_IOMMU_PLATFORM;
//
// In virtio-1.0, feature negotiation is expected to complete before queue
// discovery, and the device can also reject the selected set of features.
//
if (Dev->VirtIo->Revision >= VIRTIO_SPEC_REVISION (1, 0, 0)) {
Status = Virtio10WriteFeatures (Dev->VirtIo, Features, &NextDevStat);
if (EFI_ERROR (Status)) {
goto Failed;
}
}
//
// step 4b -- allocate request virtqueue
//
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = Dev->VirtIo->SetQueueSel (Dev->VirtIo, VIRTIO_SCSI_REQUEST_QUEUE);
if (EFI_ERROR (Status)) {
goto Failed;
}
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = Dev->VirtIo->GetQueueNumMax (Dev->VirtIo, &QueueSize);
if (EFI_ERROR (Status)) {
goto Failed;
}
//
// VirtioScsiPassThru() uses at most four descriptors
//
if (QueueSize < 4) {
Status = EFI_UNSUPPORTED;
goto Failed;
}
Status = VirtioRingInit (Dev->VirtIo, QueueSize, &Dev->Ring);
if (EFI_ERROR (Status)) {
goto Failed;
}
//
// If anything fails from here on, we must release the ring resources
//
Status = VirtioRingMap (
Dev->VirtIo,
&Dev->Ring,
&RingBaseShift,
&Dev->RingMap
);
if (EFI_ERROR (Status)) {
goto ReleaseQueue;
}
//
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
// Additional steps for MMIO: align the queue appropriately, and set the
// size. If anything fails from here on, we must unmap the ring resources.
//
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = Dev->VirtIo->SetQueueNum (Dev->VirtIo, QueueSize);
if (EFI_ERROR (Status)) {
goto UnmapQueue;
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
}
Status = Dev->VirtIo->SetQueueAlign (Dev->VirtIo, EFI_PAGE_SIZE);
if (EFI_ERROR (Status)) {
goto UnmapQueue;
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
}
//
// step 4c -- Report GPFN (guest-physical frame number) of queue.
//
Status = Dev->VirtIo->SetQueueAddress (
Dev->VirtIo,
&Dev->Ring,
RingBaseShift
);
if (EFI_ERROR (Status)) {
goto UnmapQueue;
}
//
// step 5 -- Report understood features and guest-tuneables.
//
if (Dev->VirtIo->Revision < VIRTIO_SPEC_REVISION (1, 0, 0)) {
Features &= ~(UINT64)(VIRTIO_F_VERSION_1 | VIRTIO_F_IOMMU_PLATFORM);
Status = Dev->VirtIo->SetGuestFeatures (Dev->VirtIo, Features);
if (EFI_ERROR (Status)) {
goto UnmapQueue;
}
}
//
// We expect these maximum sizes from the host. Since they are
// guest-negotiable, ask for them rather than just checking them.
//
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = VIRTIO_CFG_WRITE (Dev, CdbSize, VIRTIO_SCSI_CDB_SIZE);
if (EFI_ERROR (Status)) {
goto UnmapQueue;
}
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = VIRTIO_CFG_WRITE (Dev, SenseSize, VIRTIO_SCSI_SENSE_SIZE);
if (EFI_ERROR (Status)) {
goto UnmapQueue;
}
//
// step 6 -- initialization complete
//
NextDevStat |= VSTAT_DRIVER_OK;
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);
if (EFI_ERROR (Status)) {
goto UnmapQueue;
}
//
// populate the exported interface's attributes
//
Dev->PassThru.Mode = &Dev->PassThruMode;
Dev->PassThru.PassThru = &VirtioScsiPassThru;
Dev->PassThru.GetNextTargetLun = &VirtioScsiGetNextTargetLun;
Dev->PassThru.BuildDevicePath = &VirtioScsiBuildDevicePath;
Dev->PassThru.GetTargetLun = &VirtioScsiGetTargetLun;
Dev->PassThru.ResetChannel = &VirtioScsiResetChannel;
Dev->PassThru.ResetTargetLun = &VirtioScsiResetTargetLun;
Dev->PassThru.GetNextTarget = &VirtioScsiGetNextTarget;
//
// AdapterId is a target for which no handle will be created during bus scan.
// Prevent any conflict with real devices.
//
Dev->PassThruMode.AdapterId = 0xFFFFFFFF;
//
// Set both physical and logical attributes for non-RAID SCSI channel. See
// Driver Writer's Guide for UEFI 2.3.1 v1.01, 20.1.5 Implementing Extended
// SCSI Pass Thru Protocol.
//
Dev->PassThruMode.Attributes = EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL |
EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL;
//
// no restriction on transfer buffer alignment
//
Dev->PassThruMode.IoAlign = 0;
return EFI_SUCCESS;
UnmapQueue:
Dev->VirtIo->UnmapSharedBuffer (Dev->VirtIo, Dev->RingMap);
ReleaseQueue:
VirtioRingUninit (Dev->VirtIo, &Dev->Ring);
Failed:
//
// Notify the host about our failure to setup: virtio-0.9.5, 2.2.2.1 Device
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
// Status. VirtIo access failure here should not mask the original error.
//
NextDevStat |= VSTAT_FAILED;
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);
Dev->InOutSupported = FALSE;
Dev->MaxTarget = 0;
Dev->MaxLun = 0;
Dev->MaxSectors = 0;
return Status; // reached only via Failed above
}
STATIC
VOID
EFIAPI
VirtioScsiUninit (
IN OUT VSCSI_DEV *Dev
)
{
//
// Reset the virtual device -- see virtio-0.9.5, 2.2.2.1 Device Status. When
// VIRTIO_CFG_WRITE() returns, the host will have learned to stay away from
// the old comms area.
//
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, 0);
Dev->InOutSupported = FALSE;
Dev->MaxTarget = 0;
Dev->MaxLun = 0;
Dev->MaxSectors = 0;
Dev->VirtIo->UnmapSharedBuffer (Dev->VirtIo, Dev->RingMap);
VirtioRingUninit (Dev->VirtIo, &Dev->Ring);
SetMem (&Dev->PassThru, sizeof Dev->PassThru, 0x00);
SetMem (&Dev->PassThruMode, sizeof Dev->PassThruMode, 0x00);
}
//
// Event notification function enqueued by ExitBootServices().
//
STATIC
VOID
EFIAPI
VirtioScsiExitBoot (
IN EFI_EVENT Event,
IN VOID *Context
)
{
VSCSI_DEV *Dev;
DEBUG ((DEBUG_VERBOSE, "%a: Context=0x%p\n", __FUNCTION__, Context));
//
// Reset the device. This causes the hypervisor to forget about the virtio
// ring.
//
// We allocated said ring in EfiBootServicesData type memory, and code
// executing after ExitBootServices() is permitted to overwrite it.
//
Dev = Context;
Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, 0);
}
//
// Probe, start and stop functions of this driver, called by the DXE core for
// specific devices.
//
// The following specifications document these interfaces:
// - Driver Writer's Guide for UEFI 2.3.1 v1.01, 9 Driver Binding Protocol
// - UEFI Spec 2.3.1 + Errata C, 10.1 EFI Driver Binding Protocol
//
// The implementation follows:
// - Driver Writer's Guide for UEFI 2.3.1 v1.01
// - 5.1.3.4 OpenProtocol() and CloseProtocol()
// - UEFI Spec 2.3.1 + Errata C
// - 6.3 Protocol Handler Services
//
EFI_STATUS
EFIAPI
VirtioScsiDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE DeviceHandle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
EFI_STATUS Status;
VIRTIO_DEVICE_PROTOCOL *VirtIo;
//
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
// Attempt to open the device with the VirtIo set of interfaces. On success,
// the protocol is "instantiated" for the VirtIo device. Covers duplicate open
// attempts (EFI_ALREADY_STARTED).
//
Status = gBS->OpenProtocol (
DeviceHandle, // candidate device
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
&gVirtioDeviceProtocolGuid, // for generic VirtIo access
(VOID **)&VirtIo, // handle to instantiate
This->DriverBindingHandle, // requestor driver identity
DeviceHandle, // ControllerHandle, according to
// the UEFI Driver Model
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
EFI_OPEN_PROTOCOL_BY_DRIVER // get exclusive VirtIo access to
// the device; to be released
);
if (EFI_ERROR (Status)) {
return Status;
}
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
if (VirtIo->SubSystemDeviceId != VIRTIO_SUBSYSTEM_SCSI_HOST) {
Status = EFI_UNSUPPORTED;
}
//
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
// We needed VirtIo access only transitorily, to see whether we support the
// device or not.
//
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
gBS->CloseProtocol (DeviceHandle, &gVirtioDeviceProtocolGuid,
This->DriverBindingHandle, DeviceHandle);
return Status;
}
EFI_STATUS
EFIAPI
VirtioScsiDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE DeviceHandle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
VSCSI_DEV *Dev;
EFI_STATUS Status;
Dev = (VSCSI_DEV *) AllocateZeroPool (sizeof *Dev);
if (Dev == NULL) {
return EFI_OUT_OF_RESOURCES;
}
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
Status = gBS->OpenProtocol (DeviceHandle, &gVirtioDeviceProtocolGuid,
(VOID **)&Dev->VirtIo, This->DriverBindingHandle,
DeviceHandle, EFI_OPEN_PROTOCOL_BY_DRIVER);
if (EFI_ERROR (Status)) {
goto FreeVirtioScsi;
}
//
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
// VirtIo access granted, configure virtio-scsi device.
//
Status = VirtioScsiInit (Dev);
if (EFI_ERROR (Status)) {
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
goto CloseVirtIo;
}
Status = gBS->CreateEvent (EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_CALLBACK,
&VirtioScsiExitBoot, Dev, &Dev->ExitBoot);
if (EFI_ERROR (Status)) {
goto UninitDev;
}
//
// Setup complete, attempt to export the driver instance's PassThru
// interface.
//
Dev->Signature = VSCSI_SIG;
Status = gBS->InstallProtocolInterface (&DeviceHandle,
&gEfiExtScsiPassThruProtocolGuid, EFI_NATIVE_INTERFACE,
&Dev->PassThru);
if (EFI_ERROR (Status)) {
goto CloseExitBoot;
}
return EFI_SUCCESS;
CloseExitBoot:
gBS->CloseEvent (Dev->ExitBoot);
UninitDev:
VirtioScsiUninit (Dev);
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
CloseVirtIo:
gBS->CloseProtocol (DeviceHandle, &gVirtioDeviceProtocolGuid,
This->DriverBindingHandle, DeviceHandle);
FreeVirtioScsi:
FreePool (Dev);
return Status;
}
EFI_STATUS
EFIAPI
VirtioScsiDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE DeviceHandle,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
)
{
EFI_STATUS Status;
EFI_EXT_SCSI_PASS_THRU_PROTOCOL *PassThru;
VSCSI_DEV *Dev;
Status = gBS->OpenProtocol (
DeviceHandle, // candidate device
&gEfiExtScsiPassThruProtocolGuid, // retrieve the SCSI iface
(VOID **)&PassThru, // target pointer
This->DriverBindingHandle, // requestor driver ident.
DeviceHandle, // lookup req. for dev.
EFI_OPEN_PROTOCOL_GET_PROTOCOL // lookup only, no new ref.
);
if (EFI_ERROR (Status)) {
return Status;
}
Dev = VIRTIO_SCSI_FROM_PASS_THRU (PassThru);
//
// Handle Stop() requests for in-use driver instances gracefully.
//
Status = gBS->UninstallProtocolInterface (DeviceHandle,
&gEfiExtScsiPassThruProtocolGuid, &Dev->PassThru);
if (EFI_ERROR (Status)) {
return Status;
}
gBS->CloseEvent (Dev->ExitBoot);
VirtioScsiUninit (Dev);
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
gBS->CloseProtocol (DeviceHandle, &gVirtioDeviceProtocolGuid,
This->DriverBindingHandle, DeviceHandle);
FreePool (Dev);
return EFI_SUCCESS;
}
//
// The static object that groups the Supported() (ie. probe), Start() and
// Stop() functions of the driver together. Refer to UEFI Spec 2.3.1 + Errata
// C, 10.1 EFI Driver Binding Protocol.
//
STATIC EFI_DRIVER_BINDING_PROTOCOL gDriverBinding = {
&VirtioScsiDriverBindingSupported,
&VirtioScsiDriverBindingStart,
&VirtioScsiDriverBindingStop,
0x10, // Version, must be in [0x10 .. 0xFFFFFFEF] for IHV-developed drivers
NULL, // ImageHandle, to be overwritten by
// EfiLibInstallDriverBindingComponentName2() in VirtioScsiEntryPoint()
NULL // DriverBindingHandle, ditto
};
//
// The purpose of the following scaffolding (EFI_COMPONENT_NAME_PROTOCOL and
// EFI_COMPONENT_NAME2_PROTOCOL implementation) is to format the driver's name
// in English, for display on standard console devices. This is recommended for
// UEFI drivers that follow the UEFI Driver Model. Refer to the Driver Writer's
// Guide for UEFI 2.3.1 v1.01, 11 UEFI Driver and Controller Names.
//
// Device type names ("Virtio SCSI Host Device") are not formatted because the
// driver supports only that device type. Therefore the driver name suffices
// for unambiguous identification.
//
STATIC
EFI_UNICODE_STRING_TABLE mDriverNameTable[] = {
{ "eng;en", L"Virtio SCSI Host Driver" },
{ NULL, NULL }
};
STATIC
EFI_COMPONENT_NAME_PROTOCOL gComponentName;
EFI_STATUS
EFIAPI
VirtioScsiGetDriverName (
IN EFI_COMPONENT_NAME_PROTOCOL *This,
IN CHAR8 *Language,
OUT CHAR16 **DriverName
)
{
return LookupUnicodeString2 (
Language,
This->SupportedLanguages,
mDriverNameTable,
DriverName,
(BOOLEAN)(This == &gComponentName) // Iso639Language
);
}
EFI_STATUS
EFIAPI
VirtioScsiGetDeviceName (
IN EFI_COMPONENT_NAME_PROTOCOL *This,
IN EFI_HANDLE DeviceHandle,
IN EFI_HANDLE ChildHandle,
IN CHAR8 *Language,
OUT CHAR16 **ControllerName
)
{
return EFI_UNSUPPORTED;
}
STATIC
EFI_COMPONENT_NAME_PROTOCOL gComponentName = {
&VirtioScsiGetDriverName,
&VirtioScsiGetDeviceName,
"eng" // SupportedLanguages, ISO 639-2 language codes
};
STATIC
EFI_COMPONENT_NAME2_PROTOCOL gComponentName2 = {
(EFI_COMPONENT_NAME2_GET_DRIVER_NAME) &VirtioScsiGetDriverName,
(EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) &VirtioScsiGetDeviceName,
"en" // SupportedLanguages, RFC 4646 language codes
};
//
// Entry point of this driver.
//
EFI_STATUS
EFIAPI
VirtioScsiEntryPoint (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
return EfiLibInstallDriverBindingComponentName2 (
ImageHandle,
SystemTable,
&gDriverBinding,
ImageHandle,
&gComponentName,
&gComponentName2
);
}