audk/EdkModulePkg/Include/Protocol/ScsiIo.h

242 lines
10 KiB
C
Raw Normal View History

/*++
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
ScsiIo.h
Abstract:
SCSI I/O protocol.
--*/
#ifndef __SCSI_IO_H__
#define __SCSI_IO_H__
#define EFI_SCSI_IO_PROTOCOL_GUID \
{ 0x403cd195, 0xf233, 0x48ec, {0x84, 0x55, 0xb2, 0xe5, 0x2f, 0x1d, 0x9e, 0x2 } }
//
// Forward reference for pure ANSI compatability
//
typedef struct _EFI_SCSI_IO_PROTOCOL EFI_SCSI_IO_PROTOCOL;
//
// SCSI Host Adapter Status definition
//
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_OK 0x00
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND 0x09 // timeout when processing the command
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_TIMEOUT 0x0b // timeout when waiting for the command processing
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_MESSAGE_REJECT 0x0d // a message reject was received when processing command
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_BUS_RESET 0x0e // a bus reset was detected
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_PARITY_ERROR 0x0f
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_REQUEST_SENSE_FAILED 0x10 // the adapter failed in issuing request sense command
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_SELECTION_TIMEOUT 0x11 // selection timeout
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN 0x12 // data overrun or data underrun
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_BUS_FREE 0x13 // Unexepected bus free
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_PHASE_ERROR 0x14 // Target bus phase sequence failure
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_OTHER 0x7f
//
// SCSI Target Status definition
//
#define EFI_SCSI_IO_STATUS_TARGET_GOOD 0x00
#define EFI_SCSI_IO_STATUS_TARGET_CHECK_CONDITION 0x02 // check condition
#define EFI_SCSI_IO_STATUS_TARGET_CONDITION_MET 0x04 // condition met
#define EFI_SCSI_IO_STATUS_TARGET_BUSY 0x08 // busy
#define EFI_SCSI_IO_STATUS_TARGET_INTERMEDIATE 0x10 // intermediate
#define EFI_SCSI_IO_STATUS_TARGET_INTERMEDIATE_CONDITION_MET 0x14 // intermediate-condition met
#define EFI_SCSI_IO_STATUS_TARGET_RESERVATION_CONFLICT 0x18 // reservation conflict
#define EFI_SCSI_IO_STATUS_TARGET_COMMOND_TERMINATED 0x22 // command terminated
#define EFI_SCSI_IO_STATUS_TARGET_QUEUE_FULL 0x28 // queue full
typedef struct {
UINT64 Timeout;
VOID *DataBuffer;
VOID *SenseData;
VOID *Cdb;
UINT32 TransferLength;
UINT8 CdbLength;
UINT8 DataDirection;
UINT8 HostAdapterStatus;
UINT8 TargetStatus;
UINT8 SenseDataLength;
}EFI_SCSI_IO_SCSI_REQUEST_PACKET;
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_IO_PROTOCOL_GET_DEVICE_TYPE) (
IN EFI_SCSI_IO_PROTOCOL *This,
OUT UINT8 *DeviceType
)
/*++
Routine Description:
Retrieves the device type information of the SCSI Controller.
Arguments:
This - Protocol instance pointer.
DeviceType - A pointer to the device type information
retrieved from the SCSI Controller.
Returns:
EFI_SUCCESS - Retrieves the device type information successfully.
EFI_INVALID_PARAMETER - The DeviceType is NULL.
--*/
;
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_IO_PROTOCOL_GET_DEVICE_LOCATION) (
IN EFI_SCSI_IO_PROTOCOL *This,
OUT UINT32 *Target,
OUT UINT64 *Lun
)
/*++
Routine Description:
Retrieves the device location in the SCSI channel.
Arguments:
This - Protocol instance pointer.
Target - A pointer to the Target ID of a SCSI device
on the SCSI channel.
Lun - A pointer to the LUN of the SCSI device on
the SCSI channel.
Returns:
EFI_SUCCESS - Retrieves the device location successfully.
EFI_INVALID_PARAMETER - The Target or Lun is NULL.
--*/
;
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_IO_PROTOCOL_RESET_BUS) (
IN EFI_SCSI_IO_PROTOCOL *This
)
/*++
Routine Description:
Resets the SCSI Bus that the SCSI Controller is attached to.
Arguments:
This - Protocol instance pointer.
Returns:
EFI_SUCCESS - The SCSI bus is reset successfully.
EFI_DEVICE_ERROR - Errors encountered when resetting the SCSI bus.
EFI_UNSUPPORTED - The bus reset operation is not supported by the
SCSI Host Controller.
EFI_TIMEOUT - A timeout occurred while attempting to reset
the SCSI bus.
--*/
;
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_IO_PROTOCOL_RESET_DEVICE) (
IN EFI_SCSI_IO_PROTOCOL *This
)
/*++
Routine Description:
Resets the SCSI Controller that the device handle specifies.
Arguments:
This - Protocol instance pointer.
Returns:
EFI_SUCCESS - Reset the SCSI controller successfully.
EFI_DEVICE_ERROR - Errors are encountered when resetting the
SCSI Controller.
EFI_UNSUPPORTED - The SCSI bus does not support a device
reset operation.
EFI_TIMEOUT - A timeout occurred while attempting to
reset the SCSI Controller.
--*/
;
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_IO_PROTOCOL_EXEC_SCSI_CMD) (
IN EFI_SCSI_IO_PROTOCOL *This,
IN OUT EFI_SCSI_IO_SCSI_REQUEST_PACKET *Packet,
IN EFI_EVENT Event OPTIONAL
)
/*++
Routine Description:
Sends a SCSI Request Packet to the SCSI Controller for execution.
Arguments:
This - Protocol instance pointer.
Packet - The SCSI request packet to send to the SCSI
Controller specified by the device handle.
Event - If the SCSI bus where the SCSI device is attached
does not support non-blocking I/O, then Event is
ignored, and blocking I/O is performed.
If Event is NULL, then blocking I/O is performed.
If Event is not NULL and non-blocking I/O is
supported, then non-blocking I/O is performed,
and Event will be signaled when the SCSI Request
Packet completes.
Returns:
EFI_SUCCESS - The SCSI Request Packet was sent by the host
successfully, and TransferLength bytes were
transferred to/from DataBuffer.See
HostAdapterStatus, TargetStatus,
SenseDataLength, and SenseData in that order
for additional status information.
EFI_WARN_BUFFER_TOO_SMALL - The SCSI Request Packet was executed,
but the entire DataBuffer could not be transferred.
The actual number of bytes transferred is returned
in TransferLength. See HostAdapterStatus,
TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
EFI_NOT_READY - The SCSI Request Packet could not be sent because
there are too many SCSI Command Packets already
queued.The caller may retry again later.
EFI_DEVICE_ERROR - A device error occurred while attempting to send
the SCSI Request Packet. See HostAdapterStatus,
TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
EFI_INVALID_PARAMETER - The contents of CommandPacket are invalid.
The SCSI Request Packet was not sent, so no
additional status information is available.
EFI_UNSUPPORTED - The command described by the SCSI Request Packet
is not supported by the SCSI initiator(i.e., SCSI
Host Controller). The SCSI Request Packet was not
sent, so no additional status information is
available.
EFI_TIMEOUT - A timeout occurred while waiting for the SCSI
Request Packet to execute. See HostAdapterStatus,
TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
--*/
;
struct _EFI_SCSI_IO_PROTOCOL {
EFI_SCSI_IO_PROTOCOL_GET_DEVICE_TYPE GetDeviceType;
EFI_SCSI_IO_PROTOCOL_GET_DEVICE_LOCATION GetDeviceLocation;
EFI_SCSI_IO_PROTOCOL_RESET_BUS ResetBus;
EFI_SCSI_IO_PROTOCOL_RESET_DEVICE ResetDevice;
EFI_SCSI_IO_PROTOCOL_EXEC_SCSI_CMD ExecuteSCSICommand;
};
extern EFI_GUID gEfiScsiIoProtocolGuid;
#endif