audk/EdkCompatibilityPkg/Compatibility/MpServicesOnFrameworkMpServicesThunk/IA32/MpFuncs.S

#------------------------------------------------------------------------------
# IA32 assembly file for AP startup vector.
#
# Copyright (c) 2009 - 2010, Intel Corporation. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution.  The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#------------------------------------------------------------------------------

.equ                   VacantFlag,       0x0
.equ                   NotVacantFlag,    0xff

.equ                   LockLocation,     RendezvousFunnelProcEnd - RendezvousFunnelProcStart
.equ                   StackStart,       LockLocation + 0x04
.equ                   StackSize,        LockLocation + 0x08
.equ                   RendezvousProc,   LockLocation + 0x0C
.equ                   GdtrProfile,      LockLocation + 0x10
.equ                   BufferStart,      LockLocation + 0x18

#-------------------------------------------------------------------------------------
#RendezvousFunnelProc  procedure follows. All APs execute their procedure. This
#procedure serializes all the AP processors through an Init sequence. It must be
#noted that APs arrive here very raw...ie: real mode, no stack.
#ALSO THIS PROCEDURE IS EXECUTED BY APs ONLY ON 16 BIT MODE. HENCE THIS PROC
#IS IN MACHINE CODE.
#-------------------------------------------------------------------------------------
#RendezvousFunnelProc (&WakeUpBuffer,MemAddress);

ASM_GLOBAL ASM_PFX(RendezvousFunnelProc)
ASM_PFX(RendezvousFunnelProc):
RendezvousFunnelProcStart:


# At this point CS = 0x(vv00) and ip= 0x0.

        .byte 0x8c,0xc8               # mov        ax,  cs
        .byte 0x8e,0xd8               # mov        ds,  ax
        .byte 0x8e,0xc0               # mov        es,  ax
        .byte 0x8e,0xd0               # mov        ss,  ax 
        .byte 0x33,0xc0               # xor        ax,  ax
        .byte 0x8e,0xe0               # mov        fs,  ax
        .byte 0x8e,0xe8               # mov        gs,  ax

# Switch to flat mode.

        .byte 0xBE
        .word BufferStart
        .byte 0x66,0x8B,0xC           # mov        ecx,dword ptr [si]          ; ECX is keeping the start address of wakeup buffer

        .byte 0xFA                    # cli
        .byte 0xBE
        .word GdtrProfile
        .byte 0x66                    # db         66h
        .byte 0x2E,0xF,0x1,0x14       # lgdt       fword ptr cs:[si]

        .byte 0xBE
        .word IdtrProfile
        .byte 0x66                    # db         66h
        .byte 0x2E,0xF,0x1,0x1C       # lidt       fword ptr cs:[si]

        .byte 0x33,0xC0               # xor        ax,  ax
        .byte 0x8E,0xD8               # mov        ds,  ax
        .byte 0xF,0x20,0xC0           # mov        eax, cr0                    ; Get control register 0
        .byte 0x66,0x83,0xC8,0x1      # or         eax, 000000001h             ; Set PE bit (bit #0)
        .byte 0xF,0x22,0xC0           # mov        cr0, eax


#step-4:

FLAT32_JUMP:
        .byte 0x66
        .byte 0x67
        .byte 0xEA              # far jump
        .long 0x0
        .word 0x10

ProtectedModeStart:                   # protected mode entry point

        movw        $0x8,%ax
        .byte       0x66
        movw        %ax,%ds
        .byte       0x66
        movw        %ax,%es
        .byte       0x66
        movw        %ax,%fs
        .byte       0x66
        movw        %ax,%gs
        .byte       0x66
        movw        %ax,%ss           # Flat mode setup.


        movl        %esi,%edi
        addl        $LockLocation, %edi
        movb        $NotVacantFlag, %al
TestLock:
        xchgb       (%edi), %al
        cmpb        $NotVacantFlag, %al
        jz          TestLock

ProgramStack:
        movl        %esi,%edi
        addl        $StackSize, %edi
        movl        (%edi), %eax
        movl        %esi,%edi
        addl        $StackStart, %edi
        addl        (%edi), %eax
        movl        %eax,%esp
        movl        %eax, (%edi)

Releaselock:
        movb        $VacantFlag, %al
        movl        %esi,%edi
        addl        $LockLocation, %edi
        xchgb       (%edi), %al

        #
        # Call C Function
        #
        movl        %esi,%edi
        addl        $RendezvousProc, %edi
        movl        (%edi), %ebx

        testl       %ebx,%ebx
        jz          GoToSleep
        call        *%ebx                         # Call C function

#Step-6: Sleep

GoToSleep:

        cli
        hlt
        jmp         GoToSleep

RendezvousFunnelProcEnd:
#-------------------------------------------------------------------------------------
#  AsmGetAddressMap (&AddressMap);
#-------------------------------------------------------------------------------------
ASM_GLOBAL ASM_PFX(AsmGetAddressMap)
ASM_PFX(AsmGetAddressMap):

        pushal
        movl        %esp,%ebp

        movl        0x24(%ebp), %ebx
        movl        $RendezvousFunnelProcStart, (%ebx)
        movl        $(ProtectedModeStart - RendezvousFunnelProcStart), 0x4(%ebx)
        movl        $(FLAT32_JUMP - RendezvousFunnelProcStart), 0x8(%ebx)
        movl        $0, 0x0c(%ebx)
        movl        $0, 0x10(%ebx)
        movl        $(RendezvousFunnelProcEnd - RendezvousFunnelProcStart), 0x14(%ebx)

        popal
        ret