tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/ArmVirtPkg/ArmVirtQemu.fdf

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

128 lines
4.3 KiB
Plaintext
Raw Normal View History

ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
# Copyright (c) 2014, Linaro Limited. All rights reserved.
ArmVirtPkg: Convert to build FatPkg from source Now that FatPkg is open source (and therefore can be included in the EDK II tree) we build and use it directly. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2016-04-06 09:05:59 +02:00
# Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
ArmVirtPkg: Replace BSD License with BSD+Patent License https://bugzilla.tianocore.org/show_bug.cgi?id=1373 Replace BSD 2-Clause License with BSD+Patent License. This change is based on the following emails: https://lists.01.org/pipermail/edk2-devel/2019-February/036260.html https://lists.01.org/pipermail/edk2-devel/2018-October/030385.html RFCs with detailed process for the license change: V3: https://lists.01.org/pipermail/edk2-devel/2019-March/038116.html V2: https://lists.01.org/pipermail/edk2-devel/2019-March/037669.html V1: https://lists.01.org/pipermail/edk2-devel/2019-March/037500.html Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2019-04-04 01:03:23 +02:00
# SPDX-License-Identifier: BSD-2-Clause-Patent
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into the Flash Device Image. Each FD section
# defines one flash "device" image. A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash" image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
ArmVirtPkg: increase FD/FV size for NOOPT builds After upgrading the CI system we use for building the ArmVirtPkg targets, we started seeing failures due to the NOOPT build running out of space when using the CLANG38 toolchain definition combined with clang 7. We really don't want to increase the FD/FV sizes in general to accommodate this, so parameterize the relevant quantities and increase them by 50% for NOOPT builds. Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2019-09-07 00:15:59 +02:00
[Defines]
!if $(FD_SIZE_IN_MB) == 2
DEFINE FVMAIN_COMPACT_SIZE = 0x1ff000
!endif
!if $(FD_SIZE_IN_MB) == 3
DEFINE FVMAIN_COMPACT_SIZE = 0x2ff000
!endif
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
[FD.QEMU_EFI]
BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
ArmVirtPkg: increase FD/FV size for NOOPT builds After upgrading the CI system we use for building the ArmVirtPkg targets, we started seeing failures due to the NOOPT build running out of space when using the CLANG38 toolchain definition combined with clang 7. We really don't want to increase the FD/FV sizes in general to accommodate this, so parameterize the relevant quantities and increase them by 50% for NOOPT builds. Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2019-09-07 00:15:59 +02:00
Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
ErasePolarity = 1
# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize = 0x00001000
ArmVirtPkg: increase FD/FV size for NOOPT builds After upgrading the CI system we use for building the ArmVirtPkg targets, we started seeing failures due to the NOOPT build running out of space when using the CLANG38 toolchain definition combined with clang 7. We really don't want to increase the FD/FV sizes in general to accommodate this, so parameterize the relevant quantities and increase them by 50% for NOOPT builds. Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2019-09-07 00:15:59 +02:00
NumBlocks = $(FD_NUM_BLOCKS)
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
#
# UEFI has trouble dealing with FVs that reside at physical address 0x0.
# So instead, put a hardcoded 'jump to 0x1000' at offset 0x0, and put the
# real FV at offset 0x1000
#
0x00000000|0x00001000
DATA = {
!if $(ARCH) == AARCH64
0x00, 0x04, 0x00, 0x14 # 'b 0x1000' in AArch64 ASM
!else
0xfe, 0x03, 0x00, 0xea # 'b 0x1000' in AArch32 ASM
!endif
}
ArmVirtPkg: increase FD/FV size for NOOPT builds After upgrading the CI system we use for building the ArmVirtPkg targets, we started seeing failures due to the NOOPT build running out of space when using the CLANG38 toolchain definition combined with clang 7. We really don't want to increase the FD/FV sizes in general to accommodate this, so parameterize the relevant quantities and increase them by 50% for NOOPT builds. Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2019-09-07 00:15:59 +02:00
0x00001000|$(FVMAIN_COMPACT_SIZE)
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
ArmVirtPkg: add FDF definition for empty varstore Similar to how OVMF implements this, add a FD definition for the varstore firmware volume and the FTW areas. The template was taken from the file OvmfPkg/VarStore.fdf.inc, and subsequently modified to accommodate the differences in NOR flash layout. This affects the FvLength, Checksum and BlockMap[0] fields in the FV header, the Size field of the varstore header, and the Crc and WriteQueueSize fields of the FTW header. The event log region is not used by ArmVirtQemu, so it has been omitted. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2016-06-21 12:23:43 +02:00
!include VarStore.fdf.inc
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
ArmVirtPkg/ArmVirtQemu: factor out shared FV.FvMain definition The FDF definition of [FV.FvMain] is identical between ArmVirtQemu and ArmVirtQemuKernel, and needs to remain that way. So factor it out into a separate include file, and replace both definitions with an !include directive. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2016-07-12 10:59:57 +02:00
!include ArmVirtQemuFvMain.fdf.inc
ArmVirtualizationPkg: PlatformIntelBdsLib: display TianoCore logo Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16925 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-25 18:54:15 +01:00
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
[FV.FVMAIN_COMPACT]
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
INF MdeModulePkg/Core/Pei/PeiMain.inf
INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
ArmVirtPkg/ArmVirtQemu: enable initial ID map at early boot Now that we have all the pieces in place, switch the AArch64 version of ArmVirtQemu to a mode where the first thing it does out of reset is enable a preliminary ID map that covers the NOR flash and sufficient DRAM to create the UEFI page tables as usual. The advantage of this is that no manipulation of memory occurs any longer before the MMU is enabled, which removes the need for explicit coherency management, which is cumbersome and bad for performance. It also means we no longer need to build all components that may execute with the MMU off (including BASE libraries) with strict alignment. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-07-02 19:27:37 +02:00
INF ArmVirtPkg/MemoryInitPei/MemoryInitPeim.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
INF ArmPkg/Drivers/CpuPei/CpuPei.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
ArmVirtPkg/ArmVirtQemu: add ResetSystem PEIM for upcoming TPM2 support As a first step in gradually adding TPM2 support to ArmVirtQemu, add the TPM2_ENABLE configurable to the [Defines] section, and if it is set, add the ResetSystem PEIM to the build, along with the library class references that we will need to support it: - wire ArmVirtPsciResetSystemPeiLib into the ResetSystem PEIM itself, which will be in charge of performing the actual reset - add PeiResetSystemLib as the common ResetSystemLib resolution for PEIM class modules, so that other PEIMs will invoke the PPI published by the ResetSystem PEIM. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-02-26 20:05:10 +01:00
!if $(TPM2_ENABLE) == TRUE
ArmVirtPkg/ArmVirtQemu: omit PCD PEIM unless TPM support is enabled The TPM discovery code relies on a dynamic PCD to communicate the TPM base address to other components. But no other code relies on dynamic PCDs in the PEI phase so let's drop the PCD PEIM when TPM support is not enabled. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-09-25 17:22:04 +02:00
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
ArmVirtPkg/ArmVirtQemu: add ResetSystem PEIM for upcoming TPM2 support As a first step in gradually adding TPM2 support to ArmVirtQemu, add the TPM2_ENABLE configurable to the [Defines] section, and if it is set, add the ResetSystem PEIM to the build, along with the library class references that we will need to support it: - wire ArmVirtPsciResetSystemPeiLib into the ResetSystem PEIM itself, which will be in charge of performing the actual reset - add PeiResetSystemLib as the common ResetSystemLib resolution for PEIM class modules, so that other PEIMs will invoke the PPI published by the ResetSystem PEIM. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-02-26 20:05:10 +01:00
INF MdeModulePkg/Universal/ResetSystemPei/ResetSystemPei.inf
ArmVirtPkg/ArmVirtQemu: enable TPM2 support in the PEI phase Incorporate the PEI components and the associated library class resolutions and PCD declarations to enable TPM2 support in the PEI phase. This patch ports (parts of) the following OvmfPkg commits to ArmVirtQemu: - 6cf1880fb5b6 ("OvmfPkg: add customized Tcg2ConfigPei clone", 2018-03-09) - 4672a4892867 ("OvmfPkg: include Tcg2Pei module", 2018-03-09) - b9130c866dc0 ("OvmfPkg: link Sha384 and Sha512 support into Tcg2Pei and Tcg2Dxe", 2018-08-16) - 5d3ef15da7c3 ("OvmfPkg: link SM3 support into Tcg2Pei and Tcg2Dxe", 2019-07-19) gEfiSecurityPkgTokenSpaceGuid.PcdTpm2HashMask defaults to 0x0 so that the TPM init code adopts the currently active PCR banks as the ones that are enabled by default. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-02-26 20:05:11 +01:00
INF OvmfPkg/Tcg/Tcg2Config/Tcg2ConfigPei.inf
INF SecurityPkg/Tcg/Tcg2Pei/Tcg2Pei.inf
ArmVirtPkg/ArmVirtQemu: add ResetSystem PEIM for upcoming TPM2 support As a first step in gradually adding TPM2 support to ArmVirtQemu, add the TPM2_ENABLE configurable to the [Defines] section, and if it is set, add the ResetSystem PEIM to the build, along with the library class references that we will need to support it: - wire ArmVirtPsciResetSystemPeiLib into the ResetSystem PEIM itself, which will be in charge of performing the actual reset - add PeiResetSystemLib as the common ResetSystemLib resolution for PEIM class modules, so that other PEIMs will invoke the PPI published by the ResetSystem PEIM. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-02-26 20:05:10 +01:00
!endif
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
SECTION FV_IMAGE = FVMAIN
}
}
ArmVirtPkg: factor out Rules FDF section All three current ArmVirtPkg have identical [Rules] sections in their FDF definitions, and ideally, they should remain that way. So factor out the definitions into a separate include file, and replace the existing definitions with !include directives. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2016-07-12 11:01:24 +02:00
!include ArmVirtRules.fdf.inc