tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/OvmfPkg/OvmfPkgIa32.fdf

501 lines
18 KiB
Plaintext
Raw Normal View History

1. Correct File header to ## @file 2. Remove unnecessary .common] postfix on section. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10051 6f19259b-4bc3-4df7-8a09-765794883524
2010-02-24 00:58:38 +01:00
## @file
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
# Open Virtual Machine Firmware: FDF
#
OvmfPkg: Use the new DevicePathLib for all platforms Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <Ruiyu.ni@Intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14558 6f19259b-4bc3-4df7-8a09-765794883524
2013-08-19 06:15:36 +02:00
# Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.<BR>
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
#
Update the copyright notice format git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10439 6f19259b-4bc3-4df7-8a09-765794883524
2010-04-28 14:43:04 +02:00
# This program and the accompanying materials
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
1. Correct File header to ## @file 2. Remove unnecessary .common] postfix on section. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10051 6f19259b-4bc3-4df7-8a09-765794883524
2010-02-24 00:58:38 +01:00
##
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
################################################################################
OvmfPkg: Increase DEBUG build size to 2MB by default The 1MB image with full debug and the shell included is too large to implement flash based non-volatile variable. After this change, building with -D FD_SIZE_1MB will force the smaller flash size. The default size for RELEASE build remains at 1MB, so using -b RELEASE on the build command line will result in a 1MB flash size. For RELEASE builds -D FD_SIZE_2MB can be used to produce a 2MB flash image. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14833 6f19259b-4bc3-4df7-8a09-765794883524
2013-11-12 19:34:02 +01:00
#
# Default flash size for DEBUG build is 2MB. For RELEASE it is 1MB.
#
# Defining FD_SIZE_1MB or FD_SIZE_2MB on the build command line can
# override this.
#
[Defines]
!if $(TARGET) == RELEASE
Here is a patch that by default keeps the current 1MB FD sizes. If FD_SIZE_2MB is defined, then 2MB FD sizes will be used. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13782 6f19259b-4bc3-4df7-8a09-765794883524
2012-10-04 17:41:15 +02:00
!ifndef $(FD_SIZE_2MB)
OvmfPkg: Increase DEBUG build size to 2MB by default The 1MB image with full debug and the shell included is too large to implement flash based non-volatile variable. After this change, building with -D FD_SIZE_1MB will force the smaller flash size. The default size for RELEASE build remains at 1MB, so using -b RELEASE on the build command line will result in a 1MB flash size. For RELEASE builds -D FD_SIZE_2MB can be used to produce a 2MB flash image. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14833 6f19259b-4bc3-4df7-8a09-765794883524
2013-11-12 19:34:02 +01:00
DEFINE FD_SIZE_1MB=
!endif
!endif
!ifdef $(FD_SIZE_1MB)
Simplify DSC/FDF files for OVMF Remove duplicate FFS file GUID that would cause incremental builds to fail. Final output file is OVMF.FD and that is what should be used as bios.bin when running QEMU. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10605 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-26 00:23:22 +02:00
[FD.OVMF]
OvmfPkg: Add NV Variable storage within FD This is to prepare for QEMU flash support which will allow non-volatile variables to be saved in the flash image. Note two size changes: * NV Varstore size increased from 0xc000 to 0xe000 * FTW work size decreased from 0x2000 to 0x1000 The reason for this change is that the fault-tolerant write support requires that the work area fit within the block just before the fault-tolerant write spare storage blocks. Since QEMU flash blocks have a size of 0x1000, this means that the maximum FTW work size is 0x1000. v2: * Update commit message and PcdVariableStoreSize Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14835 6f19259b-4bc3-4df7-8a09-765794883524
2013-11-12 19:34:20 +01:00
BaseAddress = 0xFFF00000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFdBaseAddress
Size = 0x00100000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareFdSize
OVMF: Update OVMF FD/FV build to minimize ROM size * Only SEC is uncompressed now * The MAIN FV with PEI & DXE can easily shrink and grow as needed * The final output will now be OVMF.Fv rather than OVMF.fd * The final output size will be a multiple of 64kb git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9672 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-04 17:17:59 +01:00
ErasePolarity = 1
OvmfPkg: Add NV Variable storage within FD This is to prepare for QEMU flash support which will allow non-volatile variables to be saved in the flash image. Note two size changes: * NV Varstore size increased from 0xc000 to 0xe000 * FTW work size decreased from 0x2000 to 0x1000 The reason for this change is that the fault-tolerant write support requires that the work area fit within the block just before the fault-tolerant write spare storage blocks. Since QEMU flash blocks have a size of 0x1000, this means that the maximum FTW work size is 0x1000. v2: * Update commit message and PcdVariableStoreSize Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14835 6f19259b-4bc3-4df7-8a09-765794883524
2013-11-12 19:34:20 +01:00
BlockSize = 0x1000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareBlockSize
Simplify DSC/FDF files for OVMF Remove duplicate FFS file GUID that would cause incremental builds to fail. Final output file is OVMF.FD and that is what should be used as bios.bin when running QEMU. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10605 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-26 00:23:22 +02:00
NumBlocks = 0x100
OvmfPkg: Add NV Variable storage within FD This is to prepare for QEMU flash support which will allow non-volatile variables to be saved in the flash image. Note two size changes: * NV Varstore size increased from 0xc000 to 0xe000 * FTW work size decreased from 0x2000 to 0x1000 The reason for this change is that the fault-tolerant write support requires that the work area fit within the block just before the fault-tolerant write spare storage blocks. Since QEMU flash blocks have a size of 0x1000, this means that the maximum FTW work size is 0x1000. v2: * Update commit message and PcdVariableStoreSize Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14835 6f19259b-4bc3-4df7-8a09-765794883524
2013-11-12 19:34:20 +01:00
!else
[FD.OVMF]
BaseAddress = 0xFFE00000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFdBaseAddress
Size = 0x00200000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareFdSize
ErasePolarity = 1
BlockSize = 0x1000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareBlockSize
NumBlocks = 0x200
!endif
0x00000000|0x0000e000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
#NV_VARIABLE_STORE
DATA = {
## This is the EFI_FIRMWARE_VOLUME_HEADER
# ZeroVector []
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
# FileSystemGuid: gEfiSystemNvDataFvGuid =
# { 0xFFF12B8D, 0x7696, 0x4C8B,
# { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
# FvLength: 0x20000
0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
# Signature "_FVH" # Attributes
0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,
# HeaderLength # CheckSum # ExtHeaderOffset #Reserved #Revision
0x48, 0x00, 0x19, 0xF9, 0x00, 0x00, 0x00, 0x02,
# Blockmap[0]: 0x20 Blocks * 0x1000 Bytes / Block
0x20, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
# Blockmap[1]: End
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
## This is the VARIABLE_STORE_HEADER
!if $(SECURE_BOOT_ENABLE) == TRUE
# Signature: gEfiAuthenticatedVariableGuid =
# { 0xaaf32c78, 0x947b, 0x439a,
# { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 }}
0x78, 0x2c, 0xf3, 0xaa, 0x7b, 0x94, 0x9a, 0x43,
0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92,
!else
# Signature: gEfiVariableGuid =
# { 0xddcf3616, 0x3275, 0x4164,
# { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41,
0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d,
!endif
# Size: 0xe000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) -
# 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0xdfb8
# This can speed up the Variable Dispatch a bit.
0xB8, 0xDF, 0x00, 0x00,
# FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}
0x0000e000|0x00001000
#NV_EVENT_LOG
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageEventLogBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageEventLogSize
OVMF: Update OVMF FD/FV build to minimize ROM size * Only SEC is uncompressed now * The MAIN FV with PEI & DXE can easily shrink and grow as needed * The final output will now be OVMF.Fv rather than OVMF.fd * The final output size will be a multiple of 64kb git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9672 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-04 17:17:59 +01:00
OvmfPkg: Add NV Variable storage within FD This is to prepare for QEMU flash support which will allow non-volatile variables to be saved in the flash image. Note two size changes: * NV Varstore size increased from 0xc000 to 0xe000 * FTW work size decreased from 0x2000 to 0x1000 The reason for this change is that the fault-tolerant write support requires that the work area fit within the block just before the fault-tolerant write spare storage blocks. Since QEMU flash blocks have a size of 0x1000, this means that the maximum FTW work size is 0x1000. v2: * Update commit message and PcdVariableStoreSize Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14835 6f19259b-4bc3-4df7-8a09-765794883524
2013-11-12 19:34:20 +01:00
0x0000f000|0x00001000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
#NV_FTW_WORKING
DATA = {
# EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid =
# { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
0x2b, 0x29, 0x58, 0x9e, 0x68, 0x7c, 0x7d, 0x49,
0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95,
# Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved
0x2c, 0xaf, 0x2c, 0x64, 0xFE, 0xFF, 0xFF, 0xFF,
# WriteQueueSize: UINT64
0xE0, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}
0x00010000|0x00010000
#NV_FTW_SPARE
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
!ifdef $(FD_SIZE_1MB)
0x00020000|0x000CC000
Simplify DSC/FDF files for OVMF Remove duplicate FFS file GUID that would cause incremental builds to fail. Final output file is OVMF.FD and that is what should be used as bios.bin when running QEMU. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10605 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-26 00:23:22 +02:00
FV = FVMAIN_COMPACT
OvmfPkg/*.fdf: Adjust FV/FD sizes for UNIXGCC DEBUG builds In some configurations the UNIXGCC build will run out of space when a DEBUG build is enabled. This change adjusts the flash configuration a bit to allow the build succeed on UNIXGCC. The final flash image still remains 1MB in size. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11547 6f19259b-4bc3-4df7-8a09-765794883524
2011-04-17 07:47:43 +02:00
0x000EC000|0x14000
OVMF: Update OVMF FD/FV build to minimize ROM size * Only SEC is uncompressed now * The MAIN FV with PEI & DXE can easily shrink and grow as needed * The final output will now be OVMF.Fv rather than OVMF.fd * The final output size will be a multiple of 64kb git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9672 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-04 17:17:59 +01:00
FV = SECFV
Here is a patch that by default keeps the current 1MB FD sizes. If FD_SIZE_2MB is defined, then 2MB FD sizes will be used. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13782 6f19259b-4bc3-4df7-8a09-765794883524
2012-10-04 17:41:15 +02:00
OvmfPkg: Add NV Variable storage within FD This is to prepare for QEMU flash support which will allow non-volatile variables to be saved in the flash image. Note two size changes: * NV Varstore size increased from 0xc000 to 0xe000 * FTW work size decreased from 0x2000 to 0x1000 The reason for this change is that the fault-tolerant write support requires that the work area fit within the block just before the fault-tolerant write spare storage blocks. Since QEMU flash blocks have a size of 0x1000, this means that the maximum FTW work size is 0x1000. v2: * Update commit message and PcdVariableStoreSize Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14835 6f19259b-4bc3-4df7-8a09-765794883524
2013-11-12 19:34:20 +01:00
!else
0x00020000|0x001AC000
Here is a patch that by default keeps the current 1MB FD sizes. If FD_SIZE_2MB is defined, then 2MB FD sizes will be used. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13782 6f19259b-4bc3-4df7-8a09-765794883524
2012-10-04 17:41:15 +02:00
FV = FVMAIN_COMPACT
0x001CC000|0x34000
FV = SECFV
!endif
OVMF: Update OVMF FD/FV build to minimize ROM size * Only SEC is uncompressed now * The MAIN FV with PEI & DXE can easily shrink and grow as needed * The final output will now be OVMF.Fv rather than OVMF.fd * The final output size will be a multiple of 64kb git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9672 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-04 17:17:59 +01:00
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
################################################################################
OVMF: Update OVMF FD/FV build to minimize ROM size * Only SEC is uncompressed now * The MAIN FV with PEI & DXE can easily shrink and grow as needed * The final output will now be OVMF.Fv rather than OVMF.fd * The final output size will be a multiple of 64kb git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9672 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-04 17:17:59 +01:00
[FD.MEMFD]
OvmfPkg: Carve 128KB out of MAINFV in MEMFD In an effort to consolidate fixed memory used by OVMF, we'll move 2 SEC/PEI phase RAM users to 8MB. * X64 page tables (24KB) 0x80000 => 0x800000 * PEI temporary RAM (64KB) 0x70000 => 0x810000 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15144 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:38:16 +01:00
BaseAddress = 0x800000
Size = 0x800000
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
ErasePolarity = 1
BlockSize = 0x10000
OvmfPkg: increase MEMFD size to 8MB With reference to <http://sourceforge.net/mailarchive/message.php?msg_id=30359322>: "MEMFD is built so MAINFV's contents will be relocated during the build to address 0x800000", and it "is a firmware volume with most OVMF code/data uncompressed. [...] Increasing its size has a little impact on the size of the resulting firmware image since the blank part of the firmware volume will compress well." Let's increase the size to 8MB, since the current limit can get in the way (for example when building-in the Intel3.5 drivers for e1000 with -D FD_SIZE_2MB -D NETWORK_ENABLE -D SECURE_BOOT_ENABLE). Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14133 6f19259b-4bc3-4df7-8a09-765794883524
2013-02-14 20:21:56 +01:00
NumBlocks = 0x80
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
OvmfPkg X64 ResetVector: Move page tables from 512KB to 8MB To help consolidate OVMF fixed memory uses, we declare this range in MEMFD and thereby move it to 8MB. We also now declare the table range in the FDF to set PCDs. This allows us to ASSERT that CR3 is set as expected in OVMF SEC. OvmfPkgIa32.fdf and OvmfPkgIa32X64.fdf are updated simply for consistency. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15146 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:38:34 +01:00
0x000000|0x006000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesSize
OvmfPkg: implement LockBoxLib The S3 suspend/resume infrastructure depends on the LockBox library class. The edk2 tree currently contains Null and SMM instances. The Null instance is useless, and the SMM instance would require SMM emulation by including the SMM core and adding several new drivers, which is deemed too complex. Hence add a simple LockBoxLib instance for OVMF. jordan.l.justen@intel.com: * use PCDs instead of EmuNvramLib - clear memory in PlatformPei on non S3 boots * allocate NVS memory and store a pointer to that memory - reduces memory use at fixed locations Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15301 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-04 09:03:23 +01:00
0x006000|0x001000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfLockBoxStorageBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfLockBoxStorageSize
OvmfPkg: Move SEC/PEI Temporary RAM from 0x70000 to 0x810000 Note: The Temporary RAM memory size is being reduced from 64KB to 32KB. This still appears to be more than adequate for OVMF's early PEI phase. We will be adding another 32KB range of RAM just above this range for use on S3 resume. The range is declared as part of MEMFD, so it is easier to identify the memory range. We also now assign PCDs to the memory range. The PCDs are used to set the initial SEC/PEI stack in SEC's assembly code. The PCDs are also used in the SEC C code to setup the Temporary RAM PPI. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15147 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:38:43 +01:00
0x010000|0x008000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamSize
OvmfPkg: Add section of memory to use for PEI on S3 resume This 32k section of RAM will be declared to the PEI Core on S3 resume to allow memory allocations during S3 resume PEI. If the boot mode is BOOT_ON_S3_RESUME, then we publish the pre-reserved PcdS3AcpiReservedMemory range to PEI. If the boot mode is not BOOT_ON_S3_RESUME, then we reserve this range as ACPI NVS so the OS will not use it. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15294 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-04 09:02:16 +01:00
0x018000|0x008000
gUefiOvmfPkgTokenSpaceGuid.PcdS3AcpiReservedMemoryBase|gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdS3AcpiReservedMemorySize
OvmfPkg: Split MAINFV into a separate PEI and DXE FVs By splitting the PEI and DXE phases into separate FVs, we can only reserve the PEI FV for ACPI S3 support. This should save about 7MB. Unfortunately, this all has to happen in a single commit. DEC: * Remove PcdOvmfMemFv(Base|Size) * Add PcdOvmfPeiMemFv(Base|Size) * Add PcdOvmfDxeMemFv(Base|Size) FDF: * Add new PEIFV. Move PEI modules here. * Remove MAINFV * Add PEIFV and DXEFV into FVMAIN_COMPACT - They are added as 2 sections of a file, and compressed together so they should retain good compression * PcdOvmf(Pei|Dxe)MemFv(Base|Size) are set SEC: * Find both the PEI and DXE FVs after decompression. - Copy them separately to their memory locations. Platform PEI driver: * Fv.c: Publish both FVs as appropriate * MemDetect.c: PcdOvmfMemFv(Base|Size) => PcdOvmfDxeMemFv(Base|Size) OVMF.fd before: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed MAINFV uncompressed individual PEI modules uncompressed FV FFS file compressed with PI_NONE DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed OVMF.fd after: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed PEIFV uncompressed individual PEI modules uncompressed DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15151 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:39:13 +01:00
0x020000|0x0E0000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvSize
FV = PEIFV
0x100000|0x700000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvSize
FV = DXEFV
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
################################################################################
OVMF: Update OVMF FD/FV build to minimize ROM size * Only SEC is uncompressed now * The MAIN FV with PEI & DXE can easily shrink and grow as needed * The final output will now be OVMF.Fv rather than OVMF.fd * The final output size will be a multiple of 64kb git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9672 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-04 17:17:59 +01:00
[FV.SECFV]
BlockSize = 0x1000
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
#
OVMF: Update OVMF FD/FV build to minimize ROM size * Only SEC is uncompressed now * The MAIN FV with PEI & DXE can easily shrink and grow as needed * The final output will now be OVMF.Fv rather than OVMF.fd * The final output size will be a multiple of 64kb git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9672 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-04 17:17:59 +01:00
# SEC Phase modules
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
#
OVMF: Update OVMF FD/FV build to minimize ROM size * Only SEC is uncompressed now * The MAIN FV with PEI & DXE can easily shrink and grow as needed * The final output will now be OVMF.Fv rather than OVMF.fd * The final output size will be a multiple of 64kb git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9672 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-04 17:17:59 +01:00
# The code in this FV handles the initial firmware startup, and
OvmfPkg: Split MAINFV into a separate PEI and DXE FVs By splitting the PEI and DXE phases into separate FVs, we can only reserve the PEI FV for ACPI S3 support. This should save about 7MB. Unfortunately, this all has to happen in a single commit. DEC: * Remove PcdOvmfMemFv(Base|Size) * Add PcdOvmfPeiMemFv(Base|Size) * Add PcdOvmfDxeMemFv(Base|Size) FDF: * Add new PEIFV. Move PEI modules here. * Remove MAINFV * Add PEIFV and DXEFV into FVMAIN_COMPACT - They are added as 2 sections of a file, and compressed together so they should retain good compression * PcdOvmf(Pei|Dxe)MemFv(Base|Size) are set SEC: * Find both the PEI and DXE FVs after decompression. - Copy them separately to their memory locations. Platform PEI driver: * Fv.c: Publish both FVs as appropriate * MemDetect.c: PcdOvmfMemFv(Base|Size) => PcdOvmfDxeMemFv(Base|Size) OVMF.fd before: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed MAINFV uncompressed individual PEI modules uncompressed FV FFS file compressed with PI_NONE DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed OVMF.fd after: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed PEIFV uncompressed individual PEI modules uncompressed DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15151 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:39:13 +01:00
# decompresses the PEI and DXE FVs which handles the rest of the boot sequence.
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
#
OVMF: Update OVMF FD/FV build to minimize ROM size * Only SEC is uncompressed now * The MAIN FV with PEI & DXE can easily shrink and grow as needed * The final output will now be OVMF.Fv rather than OVMF.fd * The final output size will be a multiple of 64kb git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9672 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-04 17:17:59 +01:00
INF OvmfPkg/Sec/SecMain.inf
Updated OvmfPkg to use the reset vector binary from the UefiCpuPkg. Removing local reset vector files. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9912 6f19259b-4bc3-4df7-8a09-765794883524
2010-02-02 19:05:03 +01:00
INF RuleOverride=RESET_VECTOR UefiCpuPkg/ResetVector/Vtf0/Bin/ResetVector.inf
OVMF: Update OVMF FD/FV build to minimize ROM size * Only SEC is uncompressed now * The MAIN FV with PEI & DXE can easily shrink and grow as needed * The final output will now be OVMF.Fv rather than OVMF.fd * The final output size will be a multiple of 64kb git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9672 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-04 17:17:59 +01:00
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
################################################################################
OvmfPkg: Split MAINFV into a separate PEI and DXE FVs By splitting the PEI and DXE phases into separate FVs, we can only reserve the PEI FV for ACPI S3 support. This should save about 7MB. Unfortunately, this all has to happen in a single commit. DEC: * Remove PcdOvmfMemFv(Base|Size) * Add PcdOvmfPeiMemFv(Base|Size) * Add PcdOvmfDxeMemFv(Base|Size) FDF: * Add new PEIFV. Move PEI modules here. * Remove MAINFV * Add PEIFV and DXEFV into FVMAIN_COMPACT - They are added as 2 sections of a file, and compressed together so they should retain good compression * PcdOvmf(Pei|Dxe)MemFv(Base|Size) are set SEC: * Find both the PEI and DXE FVs after decompression. - Copy them separately to their memory locations. Platform PEI driver: * Fv.c: Publish both FVs as appropriate * MemDetect.c: PcdOvmfMemFv(Base|Size) => PcdOvmfDxeMemFv(Base|Size) OVMF.fd before: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed MAINFV uncompressed individual PEI modules uncompressed FV FFS file compressed with PI_NONE DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed OVMF.fd after: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed PEIFV uncompressed individual PEI modules uncompressed DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15151 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:39:13 +01:00
[FV.PEIFV]
OVMF: Update OVMF FD/FV build to minimize ROM size * Only SEC is uncompressed now * The MAIN FV with PEI & DXE can easily shrink and grow as needed * The final output will now be OVMF.Fv rather than OVMF.fd * The final output size will be a multiple of 64kb git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9672 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-04 17:17:59 +01:00
BlockSize = 0x10000
FvAlignment = 16
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
OVMF: Update OVMF FD/FV build to minimize ROM size * Only SEC is uncompressed now * The MAIN FV with PEI & DXE can easily shrink and grow as needed * The final output will now be OVMF.Fv rather than OVMF.fd * The final output size will be a multiple of 64kb git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9672 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-04 17:17:59 +01:00
APRIORI PEI {
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
}
#
# PEI Phase modules
#
INF MdeModulePkg/Core/Pei/PeiMain.inf
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
INF OvmfPkg/PlatformPei/PlatformPei.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
OvmfPkg: S3 Resume: pull in PEIM orchestrating S3 Resume "UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf" produces the EFI_PEI_S3_RESUME2 PEIM-to-PEIM Interface. When the platform-specific initialization code (in PEI) sets the Boot Mode to BOOT_ON_S3_RESUME, the DXE IPL (which is the last step in PEI) skips the DXE phase entirely, and executes the S3 Resume PEIM through the EFI_PEI_S3_RESUME2 interface instead. (See DxeLoadCore() in "MdeModulePkg/Core/DxeIplPeim/DxeLoad.c".) S3Resume2Pei depends on LockBoxLib. EFI_PEI_S3_RESUME2 [S3Resume2Pei] LockBoxLib [OvmfPkg/Library/LockBoxLib] Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15300 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-04 09:03:06 +01:00
INF UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf
OVMF: Update OVMF FD/FV build to minimize ROM size * Only SEC is uncompressed now * The MAIN FV with PEI & DXE can easily shrink and grow as needed * The final output will now be OVMF.Fv rather than OVMF.fd * The final output size will be a multiple of 64kb git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9672 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-04 17:17:59 +01:00
OVMF: Move DXE drivers into a new firmware volume A separate FV is created for DXE drivers so the DXE drivers will not be rebased along with the PEI drivers. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10091 6f19259b-4bc3-4df7-8a09-765794883524
2010-02-25 22:53:06 +01:00
################################################################################
[FV.DXEFV]
BlockSize = 0x10000
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
APRIORI DXE {
OvmfPkg: Use the new DevicePathLib for all platforms Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <Ruiyu.ni@Intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14558 6f19259b-4bc3-4df7-8a09-765794883524
2013-08-19 06:15:36 +02:00
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
OVMF: Move DXE drivers into a new firmware volume A separate FV is created for DXE drivers so the DXE drivers will not be rebased along with the PEI drivers. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10091 6f19259b-4bc3-4df7-8a09-765794883524
2010-02-25 22:53:06 +01:00
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
OvmfPkg: Add QemuFlashFvbServicesRuntimeDxe to firmware image This driver will support a flash FVB implementation if QEMU flash is detected. The driver is added to the apriori list to make sure it runs before the EmuVariableFvbRuntimeDxe driver. If this driver detects flash support, then it will disable the EmuVariableFvbRuntimeDxe driver by setting PcdFlashNvStorageVariableBase64. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14840 6f19259b-4bc3-4df7-8a09-765794883524
2013-11-12 19:35:01 +01:00
INF OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
OVMF: Move DXE drivers into a new firmware volume A separate FV is created for DXE drivers so the DXE drivers will not be rebased along with the PEI drivers. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10091 6f19259b-4bc3-4df7-8a09-765794883524
2010-02-25 22:53:06 +01:00
}
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
#
# DXE Phase modules
#
INF MdeModulePkg/Core/Dxe/DxeMain.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
OVMF: Update OVMF FD/FV build to minimize ROM size * Only SEC is uncompressed now * The MAIN FV with PEI & DXE can easily shrink and grow as needed * The final output will now be OVMF.Fv rather than OVMF.fd * The final output size will be a multiple of 64kb git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9672 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-04 17:17:59 +01:00
INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
INF PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf
fix the wrong module name. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9545 6f19259b-4bc3-4df7-8a09-765794883524
2009-12-09 03:18:21 +01:00
INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
INF UefiCpuPkg/CpuDxe/CpuDxe.inf
INF PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
INF PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
1. Impl PI 1.2 PCI part. Major changes include: a. Update PciBusDxe module, and move it from IntelFrameworkModulePkg to MdeModulePkg b. Move IncompatiblePciDeviceSupportDxe module from IntelFrameworkModulePkg to MdeModulePkg c. Update the related consumes in inf/dsc/fdf git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9350 6f19259b-4bc3-4df7-8a09-765794883524
2009-10-20 05:44:25 +02:00
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
INF PcAtChipsetPkg/KbcResetDxe/Reset.inf
INF MdeModulePkg/Universal/Metronome/Metronome.inf
Use PcAtChipsetPkg\PcatRealTimeClockRuntimeDxe\PcatRealTimeClockRuntimeDxe.inf instead of original PcAtChipsetPkg\PcRtc\RealTimeClock.inf git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8776 6f19259b-4bc3-4df7-8a09-765794883524
2009-07-07 06:52:44 +02:00
INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
OVMF: Add BlockMmioToBlockIoDxe driver This driver will wrapper BlockMmio protocol instances to produce the standard UEFI BlockIo protocol. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10296 6f19259b-4bc3-4df7-8a09-765794883524
2010-03-21 01:34:15 +01:00
INF OvmfPkg/BlockMmioToBlockIoDxe/BlockIo.inf
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
INF OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf
OvmfPkg: introduce virtio-blk driver Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13798 6f19259b-4bc3-4df7-8a09-765794883524
2012-10-08 09:32:59 +02:00
INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
OvmfPkg: introduce virtio-scsi driver Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> [jordan.l.justen@intel.com: fix build for VS2012] Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13867 6f19259b-4bc3-4df7-8a09-765794883524
2012-10-18 19:07:48 +02:00
INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
OvmfPkg: Add QemuFlashFvbServicesRuntimeDxe to firmware image This driver will support a flash FVB implementation if QEMU flash is detected. The driver is added to the apriori list to make sure it runs before the EmuVariableFvbRuntimeDxe driver. If this driver detects flash support, then it will disable the EmuVariableFvbRuntimeDxe driver by setting PcdFlashNvStorageVariableBase64. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14840 6f19259b-4bc3-4df7-8a09-765794883524
2013-11-12 19:35:01 +01:00
INF OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
OVMF: Convert from EmuVariableRuntimeDxe to VariableRuntimeDxe. OVMF utilizes EmuVariableFvbRuntimeDxe to provide an emulated variable firmware volume block device for non-volatile variables. This allows the VariableRuntimeDxe and FaultTolerantWriteDxe to function without a real non-volatile backing store. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9317 6f19259b-4bc3-4df7-8a09-765794883524
2009-09-26 09:15:51 +02:00
INF OvmfPkg/EmuVariableFvbRuntimeDxe/Fvb.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
OvmfPkg: Add custom mode setup if the Secure Boot build option is specified. If –D SECURE_BOOT_ENABLE is specified with the build command, Secure Boot support is enabled including custom mode setup. This allows Secure Boot to be configured through setup allowing OvmfPkgX64, OvmfPkgIa32 and OvmfPkg3264 to be a fully functional Secure Boot reference platforms. Remove redundant library class definitions for BaseCryptLib and OpenSslLib. Signed-off-by: Lee Rosenbaum <lee.g.rosenbaum@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13160 6f19259b-4bc3-4df7-8a09-765794883524
2012-04-04 19:35:06 +02:00
OvmfPkg: Enable secure-boot support when SECURE_BOOT_ENABLE==TRUE Adjust PCD settings, library mappings and driver usage to enable secure-boot when -D SECURE_BOOT_ENABLE=TRUE is used on the build command line. Signed-off-by: lgrosenb Reviewed-by: jljusten Reviewed-by: mdkinney git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13093 6f19259b-4bc3-4df7-8a09-765794883524
2012-03-09 18:38:53 +01:00
!if $(SECURE_BOOT_ENABLE) == TRUE
INF SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableRuntimeDxe.inf
OvmfPkg: Add custom SecureBootConfigDxe that doesn't reset We don't force a platform reset for OVMF when PK is changed in custom mode setup. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Lee Rosenbaum <lee.g.rosenbaum@intel.com> Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13635 6f19259b-4bc3-4df7-8a09-765794883524
2012-08-15 02:03:59 +02:00
INF OvmfPkg/SecureBootConfigDxe/SecureBootConfigDxe.inf
OvmfPkg: Enable secure-boot support when SECURE_BOOT_ENABLE==TRUE Adjust PCD settings, library mappings and driver usage to enable secure-boot when -D SECURE_BOOT_ENABLE=TRUE is used on the build command line. Signed-off-by: lgrosenb Reviewed-by: jljusten Reviewed-by: mdkinney git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13093 6f19259b-4bc3-4df7-8a09-765794883524
2012-03-09 18:38:53 +01:00
!else
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
!endif
OvmfPkg: Add custom mode setup if the Secure Boot build option is specified. If –D SECURE_BOOT_ENABLE is specified with the build command, Secure Boot support is enabled including custom mode setup. This allows Secure Boot to be configured through setup allowing OvmfPkgX64, OvmfPkgIa32 and OvmfPkg3264 to be a fully functional Secure Boot reference platforms. Remove redundant library class definitions for BaseCryptLib and OpenSslLib. Signed-off-by: Lee Rosenbaum <lee.g.rosenbaum@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13160 6f19259b-4bc3-4df7-8a09-765794883524
2012-04-04 19:35:06 +02:00
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
Add MdeModulePkg/Universal/PrintDxe driver to OVMF. Move many libraries to Libraries.common section. Add basic UEFI_APPLICATION libraries to allow applications to be easily added to OVMF builds. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8688 6f19259b-4bc3-4df7-8a09-765794883524
2009-06-30 17:57:29 +02:00
INF MdeModulePkg/Universal/PrintDxe/PrintDxe.inf
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
INF IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
INF PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
Update OVMF platform to use new display engine and browser. Signed-off-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14541 6f19259b-4bc3-4df7-8a09-765794883524
2013-08-12 04:24:32 +02:00
INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
OvmfPkg: Add NullMemoryTestDxe driver This driver will find untested memory in the system, and make it available to the system. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11265 6f19259b-4bc3-4df7-8a09-765794883524
2011-01-21 17:50:47 +01:00
INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
INF PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
INF IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
Removing IsaSerailDxe driver instead of removing the TerminalDxe driver when source level debugging feature enabled. Signed-off-by: vanjeff Reviewed-by: niruiyu git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12573 6f19259b-4bc3-4df7-8a09-765794883524
2011-10-26 09:08:32 +02:00
!ifndef $(SOURCE_DEBUG_ENABLE)
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
INF IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
Removing IsaSerailDxe driver instead of removing the TerminalDxe driver when source level debugging feature enabled. Signed-off-by: vanjeff Reviewed-by: niruiyu git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12573 6f19259b-4bc3-4df7-8a09-765794883524
2011-10-26 09:08:32 +02:00
!endif
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
INF IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf
INF IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf
OvmfPkg/SmbiosPlatformDxe: Add OVMF SMBIOS driver (with Xen support) Locates Xen SMBIOS data and installs it using the SMBIOS protocol. Signed-off-by: gavinguan Reviewed-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: jljusten git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12125 6f19259b-4bc3-4df7-8a09-765794883524
2011-08-14 00:54:37 +02:00
INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
INF OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
OvmfPkg: Add AcpiPlatformDxe This driver is currently a direct copy of MdeModulePkg/Universal/Acpi/AcpiPlatformDxe. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13384 6f19259b-4bc3-4df7-8a09-765794883524
2012-05-31 01:15:00 +02:00
INF OvmfPkg/AcpiPlatformDxe/AcpiPlatformDxe.inf
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
INF RuleOverride=ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf
Remove extra references to binary INFs from DSC file Add build rules for BINARY INFs to the FDF files. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10610 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-29 06:55:13 +02:00
INF RuleOverride = BINARY FatBinPkg/EnhancedFatDxe/Fat.inf
OvmfPkg: Add support for UEFI shell When building: -D BUILD_NEW_SHELL - Build and include UEFI shell in firmware -D USE_NEW_SHELL - Include UEFI shell binary build in firmware The default is to use the older EFI shell. Signed-off-by: jljusten git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11890 6f19259b-4bc3-4df7-8a09-765794883524
2011-06-26 20:58:41 +02:00
OvmfPkg: Build and use the UEFI shell by default Previously OVMF included the older EFI shell binary when building. Now we will build and use the UEFI shell (ShellPkg) instead. v2: * Don't bother building UEFI shell when USE_OLD_SHELL is defined * Fix errors in OvmfPkgIa32X64.fdf Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14600 6f19259b-4bc3-4df7-8a09-765794883524
2013-08-23 20:45:47 +02:00
!ifndef $(USE_OLD_SHELL)
OvmfPkg: Add support for UEFI shell When building: -D BUILD_NEW_SHELL - Build and include UEFI shell in firmware -D USE_NEW_SHELL - Include UEFI shell binary build in firmware The default is to use the older EFI shell. Signed-off-by: jljusten git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11890 6f19259b-4bc3-4df7-8a09-765794883524
2011-06-26 20:58:41 +02:00
INF ShellPkg/Application/Shell/Shell.inf
!else
Remove extra references to binary INFs from DSC file Add build rules for BINARY INFs to the FDF files. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10610 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-29 06:55:13 +02:00
INF RuleOverride = BINARY EdkShellBinPkg/FullShell/FullShell.inf
OvmfPkg: Add support for UEFI shell When building: -D BUILD_NEW_SHELL - Build and include UEFI shell in firmware -D USE_NEW_SHELL - Include UEFI shell binary build in firmware The default is to use the older EFI shell. Signed-off-by: jljusten git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11890 6f19259b-4bc3-4df7-8a09-765794883524
2011-06-26 20:58:41 +02:00
!endif
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
Retire Logo and Shell guid header file, which are replaced by gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile and gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8829 6f19259b-4bc3-4df7-8a09-765794883524
2009-07-09 07:48:35 +02:00
FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {
Simplify DSC/FDF files for OVMF Remove duplicate FFS file GUID that would cause incremental builds to fail. Final output file is OVMF.FD and that is what should be used as bios.bin when running QEMU. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10605 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-26 00:23:22 +02:00
SECTION RAW = MdeModulePkg/Logo/Logo.bmp
}
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
Add support for e1000 NICs to OVMF 1) Update README describing the QEMU version required for e1000, where to download the UEFI drivers for e1000, and how to enable network drivers in the platform firmware 2) Update DSC/FDF files NETWORK_ENABLE switch to enable e1000 and network driver support git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10697 6f19259b-4bc3-4df7-8a09-765794883524
2010-07-26 20:07:19 +02:00
#
# Network modules
#
OvmfPkg: enable the generic network stack by default DHCP, PXE, and StdLib socket apps are enabled in OVMF by the sum of: (a) a UEFI NIC driver, (b) the generic network stack. The only choice for (a) used to be the proprietary Intel E1000 driver, which is cumbersome to obtain and enable. The iPXE UEFI NIC drivers packaged with qemu-1.5 cover (a) for each NIC type supported by qemu, and are easy to obtain & configure, even for earlier qemu versions. Therefore enable (b) per default as well. This doesn't take up much space; the binaries (b) adds to the firmware don't seem to need -D FD_SIZE_2MB. Intel's e1000 driver remains an option, requested by the -D E1000_ENABLE build flag. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14366 6f19259b-4bc3-4df7-8a09-765794883524
2013-05-15 20:20:39 +02:00
!if $(E1000_ENABLE)
Add support for e1000 NICs to OVMF 1) Update README describing the QEMU version required for e1000, where to download the UEFI drivers for e1000, and how to enable network drivers in the platform firmware 2) Update DSC/FDF files NETWORK_ENABLE switch to enable e1000 and network driver support git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10697 6f19259b-4bc3-4df7-8a09-765794883524
2010-07-26 20:07:19 +02:00
FILE DRIVER = 5D695E11-9B3F-4b83-B25F-4A8D5D69BE07 {
SECTION PE32 = Intel3.5/EFI32/E3507E2.EFI
}
OvmfPkg: enable the generic network stack by default DHCP, PXE, and StdLib socket apps are enabled in OVMF by the sum of: (a) a UEFI NIC driver, (b) the generic network stack. The only choice for (a) used to be the proprietary Intel E1000 driver, which is cumbersome to obtain and enable. The iPXE UEFI NIC drivers packaged with qemu-1.5 cover (a) for each NIC type supported by qemu, and are easy to obtain & configure, even for earlier qemu versions. Therefore enable (b) per default as well. This doesn't take up much space; the binaries (b) adds to the firmware don't seem to need -D FD_SIZE_2MB. Intel's e1000 driver remains an option, requested by the -D E1000_ENABLE build flag. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14366 6f19259b-4bc3-4df7-8a09-765794883524
2013-05-15 20:20:39 +02:00
!endif
Add support for e1000 NICs to OVMF 1) Update README describing the QEMU version required for e1000, where to download the UEFI drivers for e1000, and how to enable network drivers in the platform firmware 2) Update DSC/FDF files NETWORK_ENABLE switch to enable e1000 and network driver support git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10697 6f19259b-4bc3-4df7-8a09-765794883524
2010-07-26 20:07:19 +02:00
INF MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf
INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf
INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
OvmfPkg: enable building VirtioNetDxe Also summarize the resultant NIC driver options in the README file. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14421 6f19259b-4bc3-4df7-8a09-765794883524
2013-06-14 09:41:13 +02:00
INF OvmfPkg/VirtioNetDxe/VirtioNet.inf
Add support for e1000 NICs to OVMF 1) Update README describing the QEMU version required for e1000, where to download the UEFI drivers for e1000, and how to enable network drivers in the platform firmware 2) Update DSC/FDF files NETWORK_ENABLE switch to enable e1000 and network driver support git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10697 6f19259b-4bc3-4df7-8a09-765794883524
2010-07-26 20:07:19 +02:00
OvmfPkg: Add USB support Add USB drivers to OVMF build git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11217 6f19259b-4bc3-4df7-8a09-765794883524
2010-12-31 08:55:38 +01:00
#
# Usb Support
#
INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
OvmfPkg: Add CSM16 and related drivers if CSM_ENABLE is set Note: The CSM16 binary must be copied into the tree at OvmfPkg/Csm/Csm16/Csm16.bin in order to use CSM_ENABLE. If CSM_ENABLE is set during the build, then the CSM16 binary and the CSM support (Legacy BIOS) drivers will be added to the build. Signed-off-by: jljusten Reviewed-by: geekboy15a git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12682 6f19259b-4bc3-4df7-8a09-765794883524
2011-11-10 23:04:49 +01:00
!ifdef $(CSM_ENABLE)
INF IntelFrameworkModulePkg/Csm/BiosThunk/VideoDxe/VideoDxe.inf
INF IntelFrameworkModulePkg/Csm/LegacyBiosDxe/LegacyBiosDxe.inf
INF RuleOverride=CSM OvmfPkg/Csm/Csm16/Csm16.inf
!endif
embed OvmfVideo.rom into OVMF.fd This enables qemu to use OVMF with a single -bios option. Based on <http://lists.xen.org/archives/html/xen-devel/2012-03/msg01992.html>. v1->v2: - move xen-devel link from code to commit message - cover all three FDF files Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> [jordan.l.justen@intel.com: remove vgabios-cirrus.bin from build.sh/README] Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13520 6f19259b-4bc3-4df7-8a09-765794883524
2012-07-11 00:43:19 +02:00
INF OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
################################################################################
Simplify DSC/FDF files for OVMF Remove duplicate FFS file GUID that would cause incremental builds to fail. Final output file is OVMF.FD and that is what should be used as bios.bin when running QEMU. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10605 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-26 00:23:22 +02:00
[FV.FVMAIN_COMPACT]
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
Simplify DSC/FDF files for OVMF Remove duplicate FFS file GUID that would cause incremental builds to fail. Final output file is OVMF.FD and that is what should be used as bios.bin when running QEMU. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10605 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-26 00:23:22 +02:00
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
OvmfPkg: Split MAINFV into a separate PEI and DXE FVs By splitting the PEI and DXE phases into separate FVs, we can only reserve the PEI FV for ACPI S3 support. This should save about 7MB. Unfortunately, this all has to happen in a single commit. DEC: * Remove PcdOvmfMemFv(Base|Size) * Add PcdOvmfPeiMemFv(Base|Size) * Add PcdOvmfDxeMemFv(Base|Size) FDF: * Add new PEIFV. Move PEI modules here. * Remove MAINFV * Add PEIFV and DXEFV into FVMAIN_COMPACT - They are added as 2 sections of a file, and compressed together so they should retain good compression * PcdOvmf(Pei|Dxe)MemFv(Base|Size) are set SEC: * Find both the PEI and DXE FVs after decompression. - Copy them separately to their memory locations. Platform PEI driver: * Fv.c: Publish both FVs as appropriate * MemDetect.c: PcdOvmfMemFv(Base|Size) => PcdOvmfDxeMemFv(Base|Size) OVMF.fd before: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed MAINFV uncompressed individual PEI modules uncompressed FV FFS file compressed with PI_NONE DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed OVMF.fd after: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed PEIFV uncompressed individual PEI modules uncompressed DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15151 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:39:13 +01:00
#
# These firmware volumes will have files placed in them uncompressed,
# and then both firmware volumes will be compressed in a single
# compression operation in order to achieve better overall compression.
#
SECTION FV_IMAGE = PEIFV
SECTION FV_IMAGE = DXEFV
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
}
}
################################################################################
[Rule.Common.SEC]
FILE SEC = $(NAMED_GUID) {
Add the missing OUTPUT directory for the EFI and depex file in Rule section. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10135 6f19259b-4bc3-4df7-8a09-765794883524
2010-03-01 07:47:58 +01:00
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
UI STRING ="$(MODULE_NAME)" Optional
VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
Simplify DSC/FDF files for OVMF Remove duplicate FFS file GUID that would cause incremental builds to fail. Final output file is OVMF.FD and that is what should be used as bios.bin when running QEMU. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10605 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-26 00:23:22 +02:00
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
PE32 PE32 Align=32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
OVMF: Align PE images in ROM, and strip relocations were possible. Align the PE32/32+ images in the ROM for XIP (execute in place) images to function properly following the change in r9327. Also, convert pre-memory PEIM's to use the TE image format and strip-relocation data from image. This saves a little space, and provides a sample usage of TE images. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9332 6f19259b-4bc3-4df7-8a09-765794883524
2009-10-07 18:01:09 +02:00
}
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
Add the missing OUTPUT directory for the EFI and depex file in Rule section. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10135 6f19259b-4bc3-4df7-8a09-765794883524
2010-03-01 07:47:58 +01:00
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 Align=32 $(INF_OUTPUT)/$(MODULE_NAME).efi
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
Add the missing OUTPUT directory for the EFI and depex file in Rule section. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10135 6f19259b-4bc3-4df7-8a09-765794883524
2010-03-01 07:47:58 +01:00
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
Simplify DSC/FDF files for OVMF Remove duplicate FFS file GUID that would cause incremental builds to fail. Final output file is OVMF.FD and that is what should be used as bios.bin when running QEMU. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10605 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-26 00:23:22 +02:00
[Rule.Common.DXE_DRIVER]
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
FILE DRIVER = $(NAMED_GUID) {
Add the missing OUTPUT directory for the EFI and depex file in Rule section. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10135 6f19259b-4bc3-4df7-8a09-765794883524
2010-03-01 07:47:58 +01:00
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
Simplify DSC/FDF files for OVMF Remove duplicate FFS file GUID that would cause incremental builds to fail. Final output file is OVMF.FD and that is what should be used as bios.bin when running QEMU. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10605 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-26 00:23:22 +02:00
[Rule.Common.DXE_RUNTIME_DRIVER]
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
FILE DRIVER = $(NAMED_GUID) {
Add the missing OUTPUT directory for the EFI and depex file in Rule section. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10135 6f19259b-4bc3-4df7-8a09-765794883524
2010-03-01 07:47:58 +01:00
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
Add support for e1000 NICs to OVMF 1) Update README describing the QEMU version required for e1000, where to download the UEFI drivers for e1000, and how to enable network drivers in the platform firmware 2) Update DSC/FDF files NETWORK_ENABLE switch to enable e1000 and network driver support git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10697 6f19259b-4bc3-4df7-8a09-765794883524
2010-07-26 20:07:19 +02:00
Simplify DSC/FDF files for OVMF Remove duplicate FFS file GUID that would cause incremental builds to fail. Final output file is OVMF.FD and that is what should be used as bios.bin when running QEMU. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10605 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-26 00:23:22 +02:00
[Rule.Common.UEFI_DRIVER]
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
FILE DRIVER = $(NAMED_GUID) {
Add the missing OUTPUT directory for the EFI and depex file in Rule section. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10135 6f19259b-4bc3-4df7-8a09-765794883524
2010-03-01 07:47:58 +01:00
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
Remove extra references to binary INFs from DSC file Add build rules for BINARY INFs to the FDF files. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10610 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-29 06:55:13 +02:00
[Rule.Common.UEFI_DRIVER.BINARY]
Fix FFS file type for binary modules of type UEFI_DRIVER git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10614 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-29 20:34:32 +02:00
FILE DRIVER = $(NAMED_GUID) {
Remove extra references to binary INFs from DSC file Add build rules for BINARY INFs to the FDF files. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10610 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-29 06:55:13 +02:00
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
OvmfPkg: Add custom SecureBootConfigDxe that doesn't reset We don't force a platform reset for OVMF when PK is changed in custom mode setup. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Lee Rosenbaum <lee.g.rosenbaum@intel.com> Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13635 6f19259b-4bc3-4df7-8a09-765794883524
2012-08-15 02:03:59 +02:00
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
Add the missing OUTPUT directory for the EFI and depex file in Rule section. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10135 6f19259b-4bc3-4df7-8a09-765794883524
2010-03-01 07:47:58 +01:00
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
Remove extra references to binary INFs from DSC file Add build rules for BINARY INFs to the FDF files. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10610 6f19259b-4bc3-4df7-8a09-765794883524
2010-06-29 06:55:13 +02:00
[Rule.Common.UEFI_APPLICATION.BINARY]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
OvmfPkg: Add custom SecureBootConfigDxe that doesn't reset We don't force a platform reset for OVMF when PK is changed in custom mode setup. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Lee Rosenbaum <lee.g.rosenbaum@intel.com> Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13635 6f19259b-4bc3-4df7-8a09-765794883524
2012-08-15 02:03:59 +02:00
1. update AcpiTable module type to USER_DEFINED 2. added ACPITABLE rule for AcpiTable modules in fdf files. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9039 6f19259b-4bc3-4df7-8a09-765794883524
2009-08-11 07:30:52 +02:00
[Rule.Common.USER_DEFINED.ACPITABLE]
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
FILE FREEFORM = $(NAMED_GUID) {
RAW ACPI |.acpi
RAW ASL |.aml
}
OvmfPkg: Add CSM16 and related drivers if CSM_ENABLE is set Note: The CSM16 binary must be copied into the tree at OvmfPkg/Csm/Csm16/Csm16.bin in order to use CSM_ENABLE. If CSM_ENABLE is set during the build, then the CSM16 binary and the CSM support (Legacy BIOS) drivers will be added to the build. Signed-off-by: jljusten Reviewed-by: geekboy15a git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12682 6f19259b-4bc3-4df7-8a09-765794883524
2011-11-10 23:04:49 +01:00
[Rule.Common.USER_DEFINED.CSM]
FILE FREEFORM = $(NAMED_GUID) {
RAW BIN |.bin
}
Add initial version of Open Virtual Machine Firmware (OVMF) platform. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 23:10:18 +02:00
[Rule.Common.SEC.RESET_VECTOR]
FILE RAW = $(NAMED_GUID) {
RAW RAW |.raw
}