audk/UnixPkg/UnixPkg.fdf

377 lines
15 KiB
Plaintext
Raw Normal View History

# This is Unix FDF file with UEFI HII features enabled
#
# Copyright (c) 2008, Intel Corporation
#
# All rights reserved. This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into the Flash Device Image. Each FD section
# defines one flash "device" image. A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash" image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.Fv_Recovery]
BaseAddress = 0x0|gEfiUnixPkgTokenSpaceGuid.PcdUnixFdBaseAddress #The base address of the FLASH Device.
Size = 0x002a0000 #The size in bytes of the FLASH Device
ErasePolarity = 1
BlockSize = 0x10000
NumBlocks = 0x2a
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
0x00000000|0x00280000
gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize
FV = FvRecovery
0x00280000|0x0000c000
gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
#NV_VARIABLE_STORE
DATA = {
## This is the EFI_FIRMWARE_VOLUME_HEADER
# ZeroVector []
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
# FileSystemGuid: gEfiSystemNvDataFvGuid =
# { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
# FvLength: 0x20000
0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
# Signature "_FVH" #Attributes
0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,
# HeaderLength #CheckSum #ExtHeaderOffset #Reserved #Revision
0x48, 0x00, 0x36, 0x09, 0x00, 0x00, 0x00, 0x02,
# Blockmap[0]: 2 Blocks * 0x10000 Bytes / Block
0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
# Blockmap[1]: End
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
## This is the VARIABLE_STORE_HEADER
#Signature: "$VSS" #Size: 0xc000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - 0x48 (HeaderLength) = 0xBFB8
# This can speed up the Variable Dispatch a bit.
0x24, 0x56, 0x53, 0x53, 0xB8, 0xBF, 0x00, 0x00,
#FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}
0x0028c000|0x00002000
#NV_EVENT_LOG
gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageEventLogBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageEventLogSize
0x0028e000|0x00002000
gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
#NV_FTW_WORKING
DATA = {
# EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEfiSystemNvDataFvGuid =
# { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
# Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved
0x85, 0xae, 0x2d, 0xbf, 0xFE, 0xFF, 0xFF, 0xFF,
# WriteQueueSize: UINT32
0xE4, 0x1F, 0x00, 0x00
}
0x00290000|0x00010000
#NV_FTW_SPARE
gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FvRecovery]
FvAlignment = 16 #FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
################################################################################
#
# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.
# Parsing tools will scan the INF file to determine the type of component or module.
# The component or module type is used to reference the standard rules
# defined elsewhere in the FDF file.
#
# The format for INF statements is:
# INF $(PathAndInfFileName)
#
################################################################################
##
# PEI Phase modules
##
##
# PEI Apriori file example, more PEIM module added later.
##
APRIORI PEI {
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf
}
APRIORI DXE {
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/Dxe/DxeStatusCode.inf
INF UnixPkg/MetronomeDxe/Metronome.inf
}
INF MdeModulePkg/Core/Pei/PeiMain.inf
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf
INF UnixPkg/BootModePei/BootModePei.inf
INF UnixPkg/UnixFlashMapPei/FlashMap.inf
INF MdeModulePkg/Universal/MemoryTest/BaseMemoryTestPei/BaseMemoryTestPei.inf
INF UnixPkg/UnixAutoScanPei/UnixAutoScan.inf
INF UnixPkg/UnixFirmwareVolumePei/UnixFwh.inf
INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
INF UnixPkg/UnixThunkPpiToProtocolPei/UnixThunkPpiToProtocol.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
##
# DXE Phase modules
##
INF MdeModulePkg/Core/Dxe/DxeMain.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/Dxe/DxeStatusCode.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF UnixPkg/MetronomeDxe/Metronome.inf
INF UnixPkg/RealTimeClockRuntimeDxe/RealTimeClock.inf
INF UnixPkg/ResetRuntimeDxe/Reset.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF UnixPkg/FvbServicesRuntimeDxe/UnixFwh.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf
INF UnixPkg/UnixThunkDxe/UnixThunk.inf
INF UnixPkg/CpuRuntimeDxe/Cpu.inf
INF MdeModulePkg/Universal/FirmwareVolume/FaultTolerantWriteDxe/FtwLite.inf
INF IntelFrameworkModulePkg/Universal/DataHubStdErrDxe/DataHubStdErrDxe.inf
INF UnixPkg/MiscSubClassPlatformDxe/MiscSubClassDriver.inf
INF UnixPkg/TimerDxe/Timer.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
INF IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
INF IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
INF UnixPkg/UnixBusDriverDxe/UnixBusDriver.inf
INF UnixPkg/UnixBlockIoDxe/UnixBlockIo.inf
INF UnixPkg/UnixSerialIoDxe/UnixSerialIo.inf
INF UnixPkg/UnixUgaDxe/UnixUga.inf
#INF UnixPkg/UnixConsoleDxe/UnixConsole.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
INF UnixPkg/UnixSimpleFileSystemDxe/UnixSimpleFileSystem.inf
INF MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf
INF MdeModulePkg/Application/HelloWorld/HelloWorld.inf
#
# Network stack drivers
# To test network drivers, need network Io driver(SnpNt32Io.dll), please refer to NETWORK-IO Subproject.
#
#INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
#INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
#INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
#INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf
#INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
#INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
#INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
#INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
#INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
#INF UnixPkg/SnpUnixDxe/SnpUnixDxe.inf
################################################################################
#
# FILE statements are provided so that a platform integrator can include
# complete EFI FFS files, as well as a method for constructing FFS files
# using curly "{}" brace scoping. The following three FILEs are
# for binary shell, binary fat and logo module.
#
################################################################################
FILE APPLICATION = c57ad6b7-0515-40a8-9d21-551652854e37 {
SECTION COMPRESS PI_STD {
SECTION GUIDED {
SECTION PE32 = EdkShellBinPkg/FullShell/Ia32/Shell_Full.efi
}
}
}
FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {
SECTION COMPRESS PI_STD {
SECTION GUIDED {
SECTION PE32 = FatBinPkg/EnhancedFatDxe/Ia32/Fat.efi
}
}
}
FILE FREEFORM = 7BB28B99-61BB-11D5-9A5D-0090273FC14D {
SECTION COMPRESS PI_STD {
SECTION GUIDED {
SECTION RAW = MdeModulePkg/Logo/Logo.bmp
}
}
}
################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
############################################################################
#
#[Rule.Common.DXE_DRIVER]
# FILE DRIVER = $(NAMED_GUID) {
# DXE_DEPEX DXE_DEPEX Optional |.depex
# COMPRESS PI_STD {
# GUIDED {
# PE32 PE32 |.efi
# UI STRING="$(MODULE_NAME)" Optional
# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
# }
# }
# }
#
############################################################################
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING ="$(MODULE_NAME)" Optional
VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEIM.TIANOCOMPRESSED]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional |.depex
GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
COMPRESS PI_STD {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
COMPRESS PI_STD {
GUIDED {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
}
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
COMPRESS PI_STD {
GUIDED {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
}
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
COMPRESS PI_STD {
GUIDED {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
}
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
COMPRESS PI_STD {
GUIDED {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
}
}