audk/MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.c

534 lines
20 KiB
C
Raw Normal View History

/** @file
Provides generic security measurement functions for DXE module.
Copyright (c) 2009 - 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <PiDxe.h>
#include <Protocol/LoadFile.h>
#include <Library/DebugLib.h>
#include <Library/DxeServicesLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/SecurityManagementLib.h>
#include <Library/DevicePathLib.h>
#include <Library/UefiBootServicesTableLib.h>
#define SECURITY_HANDLER_TABLE_SIZE 0x10
//
// Secruity Operation on Image and none Image.
//
#define EFI_AUTH_IMAGE_OPERATION_MASK (EFI_AUTH_OPERATION_VERIFY_IMAGE \
| EFI_AUTH_OPERATION_DEFER_IMAGE_LOAD \
| EFI_AUTH_OPERATION_MEASURE_IMAGE)
#define EFI_AUTH_NONE_IMAGE_OPERATION_MASK (EFI_AUTH_OPERATION_CONNECT_POLICY \
| EFI_AUTH_OPERATION_AUTHENTICATION_STATE)
typedef struct {
UINT32 SecurityOperation;
SECURITY_FILE_AUTHENTICATION_STATE_HANDLER SecurityHandler;
} SECURITY_INFO;
typedef struct {
UINT32 Security2Operation;
SECURITY2_FILE_AUTHENTICATION_HANDLER Security2Handler;
} SECURITY2_INFO;
UINT32 mCurrentAuthOperation = 0;
UINT32 mNumberOfSecurityHandler = 0;
UINT32 mMaxNumberOfSecurityHandler = 0;
SECURITY_INFO *mSecurityTable = NULL;
UINT32 mCurrentAuthOperation2 = 0;
UINT32 mNumberOfSecurity2Handler = 0;
UINT32 mMaxNumberOfSecurity2Handler = 0;
SECURITY2_INFO *mSecurity2Table = NULL;
/**
Reallocates more global memory to store the registered Handler list.
@retval RETURN_SUCCESS Reallocate memory successfully.
@retval RETURN_OUT_OF_RESOURCES No enough memory to allocated.
**/
RETURN_STATUS
EFIAPI
ReallocateSecurityHandlerTable (
)
{
//
// Reallocate memory for security info structure.
//
mSecurityTable = ReallocatePool (
mMaxNumberOfSecurityHandler * sizeof (SECURITY_INFO),
(mMaxNumberOfSecurityHandler + SECURITY_HANDLER_TABLE_SIZE) * sizeof (SECURITY_INFO),
mSecurityTable
);
//
// No enough resource is allocated.
//
if (mSecurityTable == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Increase max handler number
//
mMaxNumberOfSecurityHandler = mMaxNumberOfSecurityHandler + SECURITY_HANDLER_TABLE_SIZE;
return RETURN_SUCCESS;
}
/**
Check whether an operation is valid according to the requirement of current operation,
which must make sure that the measure image operation is the last one.
@param CurrentAuthOperation Current operation.
@param CheckAuthOperation Operation to be checked.
@retval TRUE Operation is valid for current operation.
@retval FALSE Operation is invalid for current operation.
**/
BOOLEAN
CheckAuthenticationOperation (
IN UINT32 CurrentAuthOperation,
IN UINT32 CheckAuthOperation
)
{
//
// Make sure new auth operation can be recognized.
//
ASSERT ((CheckAuthOperation & ~(EFI_AUTH_IMAGE_OPERATION_MASK | EFI_AUTH_OPERATION_AUTHENTICATION_STATE | EFI_AUTH_OPERATION_IMAGE_REQUIRED)) == 0);
//
// When current operation includes measure image operation,
// only another measure image operation or none operation will be allowed.
//
if ((CurrentAuthOperation & EFI_AUTH_OPERATION_MEASURE_IMAGE) == EFI_AUTH_OPERATION_MEASURE_IMAGE) {
if (((CheckAuthOperation & EFI_AUTH_OPERATION_MEASURE_IMAGE) == EFI_AUTH_OPERATION_MEASURE_IMAGE) ||
((CheckAuthOperation & EFI_AUTH_IMAGE_OPERATION_MASK) == EFI_AUTH_OPERATION_NONE)) {
return TRUE;
} else {
return FALSE;
}
}
//
// When current operation doesn't include measure image operation,
// any new operation will be allowed.
//
return TRUE;
}
/**
Register security measurement handler with its operation type. The different
handler with the same operation can all be registered.
If SecurityHandler is NULL, then ASSERT().
If no enough resources available to register new handler, then ASSERT().
If AuthenticationOperation is not recongnized, then ASSERT().
If the previous register handler can't be executed before the later register handler, then ASSERT().
@param[in] SecurityHandler Security measurement service handler to be registered.
@param[in] AuthenticationOperation Operation type is specified for the registered handler.
@retval EFI_SUCCESS The handlers were registered successfully.
**/
EFI_STATUS
EFIAPI
RegisterSecurityHandler (
IN SECURITY_FILE_AUTHENTICATION_STATE_HANDLER SecurityHandler,
IN UINT32 AuthenticationOperation
)
{
EFI_STATUS Status;
ASSERT (SecurityHandler != NULL);
//
// Make sure AuthenticationOperation is valid in the register order.
//
ASSERT (CheckAuthenticationOperation (mCurrentAuthOperation, AuthenticationOperation));
mCurrentAuthOperation = mCurrentAuthOperation | AuthenticationOperation;
//
// Check whether the handler lists is enough to store new handler.
//
if (mNumberOfSecurityHandler == mMaxNumberOfSecurityHandler) {
//
// Allocate more resources for new handler.
//
Status = ReallocateSecurityHandlerTable();
ASSERT_EFI_ERROR (Status);
}
//
// Register new handler into the handler list.
//
mSecurityTable[mNumberOfSecurityHandler].SecurityOperation = AuthenticationOperation;
mSecurityTable[mNumberOfSecurityHandler].SecurityHandler = SecurityHandler;
mNumberOfSecurityHandler ++;
return EFI_SUCCESS;
}
/**
Execute registered handlers until one returns an error and that error is returned.
If none of the handlers return an error, then EFI_SUCCESS is returned.
Before exectue handler, get the image buffer by file device path if a handler
requires the image file. And return the image buffer to each handler when exectue handler.
The handlers are executed in same order to their registered order.
@param[in] AuthenticationStatus
This is the authentication type returned from the Section
Extraction protocol. See the Section Extraction Protocol
Specification for details on this type.
@param[in] FilePath This is a pointer to the device path of the file that is
being dispatched. This will optionally be used for logging.
@retval EFI_SUCCESS The file specified by File did authenticate when more
than one security handler services were registered,
or the file did not authenticate when no security
handler service was registered. And the platform policy
dictates that the DXE Core may use File.
@retval EFI_INVALID_PARAMETER File is NULL.
@retval EFI_SECURITY_VIOLATION The file specified by File did not authenticate, and
the platform policy dictates that File should be placed
in the untrusted state. A file may be promoted from
the untrusted to the trusted state at a future time
with a call to the Trust() DXE Service.
@retval EFI_ACCESS_DENIED The file specified by File did not authenticate, and
the platform policy dictates that File should not be
used for any purpose.
**/
EFI_STATUS
EFIAPI
ExecuteSecurityHandlers (
IN UINT32 AuthenticationStatus,
IN CONST EFI_DEVICE_PATH_PROTOCOL *FilePath
)
{
UINT32 Index;
EFI_STATUS Status;
UINT32 HandlerAuthenticationStatus;
VOID *FileBuffer;
UINTN FileSize;
EFI_HANDLE Handle;
EFI_DEVICE_PATH_PROTOCOL *Node;
EFI_DEVICE_PATH_PROTOCOL *FilePathToVerfiy;
if (FilePath == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Directly return successfully when no handler is registered.
//
if (mNumberOfSecurityHandler == 0) {
return EFI_SUCCESS;
}
Status = EFI_SUCCESS;
FileBuffer = NULL;
FileSize = 0;
HandlerAuthenticationStatus = AuthenticationStatus;
FilePathToVerfiy = (EFI_DEVICE_PATH_PROTOCOL *) FilePath;
//
// Run security handler in same order to their registered list
//
for (Index = 0; Index < mNumberOfSecurityHandler; Index ++) {
if ((mSecurityTable[Index].SecurityOperation & EFI_AUTH_OPERATION_IMAGE_REQUIRED) == EFI_AUTH_OPERATION_IMAGE_REQUIRED) {
//
// Try get file buffer when the handler requires image buffer.
//
if (FileBuffer == NULL) {
Node = FilePathToVerfiy;
Status = gBS->LocateDevicePath (&gEfiLoadFileProtocolGuid, &Node, &Handle);
//
// Try to get image by FALSE boot policy for the exact boot file path.
//
FileBuffer = GetFileBufferByFilePath (FALSE, FilePath, &FileSize, &AuthenticationStatus);
if (FileBuffer == NULL) {
//
// Try to get image by TRUE boot policy for the inexact boot file path.
//
FileBuffer = GetFileBufferByFilePath (TRUE, FilePath, &FileSize, &AuthenticationStatus);
}
if ((FileBuffer != NULL) && (!EFI_ERROR (Status))) {
//
// LoadFile () may cause the device path of the Handle be updated.
//
FilePathToVerfiy = AppendDevicePath (DevicePathFromHandle (Handle), Node);
}
}
}
Status = mSecurityTable[Index].SecurityHandler (
HandlerAuthenticationStatus,
FilePathToVerfiy,
FileBuffer,
FileSize
);
if (EFI_ERROR (Status)) {
break;
}
}
if (FileBuffer != NULL) {
FreePool (FileBuffer);
}
if (FilePathToVerfiy != FilePath) {
FreePool (FilePathToVerfiy);
}
return Status;
}
/**
Reallocates more global memory to store the registered Securit2Handler list.
@retval RETURN_SUCCESS Reallocate memory successfully.
@retval RETURN_OUT_OF_RESOURCES No enough memory to allocated.
**/
RETURN_STATUS
EFIAPI
ReallocateSecurity2HandlerTable (
)
{
//
// Reallocate memory for security info structure.
//
mSecurity2Table = ReallocatePool (
mMaxNumberOfSecurity2Handler * sizeof (SECURITY2_INFO),
(mMaxNumberOfSecurity2Handler + SECURITY_HANDLER_TABLE_SIZE) * sizeof (SECURITY2_INFO),
mSecurity2Table
);
//
// No enough resource is allocated.
//
if (mSecurity2Table == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Increase max handler number
//
mMaxNumberOfSecurity2Handler = mMaxNumberOfSecurity2Handler + SECURITY_HANDLER_TABLE_SIZE;
return RETURN_SUCCESS;
}
/**
Check whether an operation is valid according to the requirement of current operation,
which must make sure that the measure image operation is the last one.
If AuthenticationOperation is not recongnized, return FALSE.
If AuthenticationOperation is EFI_AUTH_OPERATION_NONE, return FALSE.
If AuthenticationOperation includes security operation and authentication operation, return FALSE.
If the previous register handler can't be executed before the later register handler, return FALSE.
@param CurrentAuthOperation Current operation.
@param CheckAuthOperation Operation to be checked.
@retval TRUE Operation is valid for current operation.
@retval FALSE Operation is invalid for current operation.
**/
BOOLEAN
CheckAuthentication2Operation (
IN UINT32 CurrentAuthOperation,
IN UINT32 CheckAuthOperation
)
{
//
// Make sure new auth operation can be recognized.
//
if (CheckAuthOperation == EFI_AUTH_OPERATION_NONE) {
return FALSE;
}
if ((CheckAuthOperation & ~(EFI_AUTH_IMAGE_OPERATION_MASK |
EFI_AUTH_NONE_IMAGE_OPERATION_MASK |
EFI_AUTH_OPERATION_IMAGE_REQUIRED)) != 0) {
return FALSE;
}
//
// When current operation includes measure image operation,
// only another measure image or none image operation will be allowed.
//
if ((CurrentAuthOperation & EFI_AUTH_OPERATION_MEASURE_IMAGE) == EFI_AUTH_OPERATION_MEASURE_IMAGE) {
if (((CheckAuthOperation & EFI_AUTH_OPERATION_MEASURE_IMAGE) == EFI_AUTH_OPERATION_MEASURE_IMAGE) ||
((CheckAuthOperation & EFI_AUTH_IMAGE_OPERATION_MASK) == 0)) {
return TRUE;
} else {
return FALSE;
}
}
//
// Any other operation will be allowed.
//
return TRUE;
}
/**
Register security measurement handler with its operation type. Different
handlers with the same operation can all be registered.
If Security2Handler is NULL, then ASSERT().
If no enough resources available to register new handler, then ASSERT().
If AuthenticationOperation is not recongnized, then ASSERT().
If AuthenticationOperation is EFI_AUTH_OPERATION_NONE, then ASSERT().
If the previous register handler can't be executed before the later register handler, then ASSERT().
@param[in] Security2Handler The security measurement service handler to be registered.
@param[in] AuthenticationOperation The operation type is specified for the registered handler.
@retval EFI_SUCCESS The handlers were registered successfully.
**/
EFI_STATUS
EFIAPI
RegisterSecurity2Handler (
IN SECURITY2_FILE_AUTHENTICATION_HANDLER Security2Handler,
IN UINT32 AuthenticationOperation
)
{
EFI_STATUS Status;
ASSERT (Security2Handler != NULL);
//
// Make sure AuthenticationOperation is valid in the register order.
//
ASSERT (CheckAuthentication2Operation (mCurrentAuthOperation2, AuthenticationOperation));
mCurrentAuthOperation2 = mCurrentAuthOperation2 | AuthenticationOperation;
//
// Check whether the handler lists is enough to store new handler.
//
if (mNumberOfSecurity2Handler == mMaxNumberOfSecurity2Handler) {
//
// Allocate more resources for new handler.
//
Status = ReallocateSecurity2HandlerTable();
ASSERT_EFI_ERROR (Status);
}
//
// Register new handler into the handler list.
//
mSecurity2Table[mNumberOfSecurity2Handler].Security2Operation = AuthenticationOperation;
mSecurity2Table[mNumberOfSecurity2Handler].Security2Handler = Security2Handler;
mNumberOfSecurity2Handler ++;
return EFI_SUCCESS;
}
/**
Execute registered handlers based on input AuthenticationOperation until
one returns an error and that error is returned.
If none of the handlers return an error, then EFI_SUCCESS is returned.
The handlers those satisfy AuthenticationOperation will only be executed.
The handlers are executed in same order to their registered order.
@param[in] AuthenticationOperation
The operation type specifies which handlers will be executed.
@param[in] AuthenticationStatus
The authentication status for the input file.
@param[in] File This is a pointer to the device path of the file that is
being dispatched. This will optionally be used for logging.
@param[in] FileBuffer A pointer to the buffer with the UEFI file image
@param[in] FileSize The size of File buffer.
@param[in] BootPolicy A boot policy that was used to call LoadImage() UEFI service.
@retval EFI_SUCCESS The file specified by DevicePath and non-NULL
FileBuffer did authenticate, and the platform policy dictates
that the DXE Foundation may use the file.
@retval EFI_SUCCESS The device path specified by NULL device path DevicePath
and non-NULL FileBuffer did authenticate, and the platform
policy dictates that the DXE Foundation may execute the image in
FileBuffer.
@retval EFI_SUCCESS FileBuffer is NULL and current user has permission to start
UEFI device drivers on the device path specified by DevicePath.
@retval EFI_SECURITY_VIOLATION The file specified by File or FileBuffer did not
authenticate, and the platform policy dictates that
the file should be placed in the untrusted state.
@retval EFI_SECURITY_VIOLATION FileBuffer FileBuffer is NULL and the user has no
permission to start UEFI device drivers on the device path specified
by DevicePath.
@retval EFI_SECURITY_VIOLATION FileBuffer is not NULL and the user has no permission to load
drivers from the device path specified by DevicePath. The
image has been added into the list of the deferred images.
@retval EFI_ACCESS_DENIED The file specified by File did not authenticate, and
the platform policy dictates that the DXE
Foundation may not use File.
@retval EFI_INVALID_PARAMETER File and FileBuffer are both NULL.
**/
EFI_STATUS
EFIAPI
ExecuteSecurity2Handlers (
IN UINT32 AuthenticationOperation,
IN UINT32 AuthenticationStatus,
IN CONST EFI_DEVICE_PATH_PROTOCOL *File,
IN VOID *FileBuffer,
IN UINTN FileSize,
IN BOOLEAN BootPolicy
)
{
UINT32 Index;
EFI_STATUS Status;
//
// Invalid case if File and FileBuffer are both NULL.
//
if (File == NULL && FileBuffer == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Directly return successfully when no handler is registered.
//
if (mNumberOfSecurity2Handler == 0) {
return EFI_SUCCESS;
}
//
// Run security handler in same order to their registered list
//
for (Index = 0; Index < mNumberOfSecurity2Handler; Index ++) {
//
// If FileBuffer is not NULL, the input is Image, which will be handled by EFI_AUTH_IMAGE_OPERATION_MASK operation.
// If FileBuffer is NULL, the input is not Image, which will be handled by EFI_AUTH_NONE_IMAGE_OPERATION_MASK operation.
// Other cases are ignored.
//
if ((FileBuffer != NULL && (mSecurity2Table[Index].Security2Operation & EFI_AUTH_IMAGE_OPERATION_MASK) != 0) ||
(FileBuffer == NULL && (mSecurity2Table[Index].Security2Operation & EFI_AUTH_NONE_IMAGE_OPERATION_MASK) != 0)) {
//
// Execute registered handlers based on input AuthenticationOperation
//
if ((mSecurity2Table[Index].Security2Operation & AuthenticationOperation) != 0) {
Status = mSecurity2Table[Index].Security2Handler (
AuthenticationStatus,
File,
FileBuffer,
FileSize,
BootPolicy
);
if (EFI_ERROR (Status)) {
return Status;
}
}
}
}
return EFI_SUCCESS;
}