audk/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h

/** @file
Private Header file for Usb Host Controller PEIM

Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.<BR>
  
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution.  The
full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef _RECOVERY_UHC_H_
#define _RECOVERY_UHC_H_


#include <PiPei.h>

#include <Ppi/UsbController.h>
#include <Ppi/UsbHostController.h>

#include <Library/DebugLib.h>
#include <Library/PeimEntryPoint.h>
#include <Library/PeiServicesLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/TimerLib.h>
#include <Library/IoLib.h>
#include <Library/PeiServicesLib.h>

#define USB_SLOW_SPEED_DEVICE 0x01
#define USB_FULL_SPEED_DEVICE 0x02

//
// One memory block uses 16 page
//
#define NORMAL_MEMORY_BLOCK_UNIT_IN_PAGES 16

#define USBCMD                            0       /* Command Register Offset 00-01h */
#define USBCMD_RS                         BIT0    /* Run/Stop */
#define USBCMD_HCRESET                    BIT1    /* Host reset */
#define USBCMD_GRESET                     BIT2    /* Global reset */
#define USBCMD_EGSM                       BIT3    /* Global Suspend Mode */
#define USBCMD_FGR                        BIT4    /* Force Global Resume */
#define USBCMD_SWDBG                      BIT5    /* SW Debug mode */
#define USBCMD_CF                         BIT6    /* Config Flag (sw only) */
#define USBCMD_MAXP                       BIT7    /* Max Packet (0 = 32, 1 = 64) */

/* Status register */
#define USBSTS        2       /* Status Register Offset 02-03h */
#define USBSTS_USBINT BIT0    /* Interrupt due to IOC */
#define USBSTS_ERROR  BIT1    /* Interrupt due to error */
#define USBSTS_RD     BIT2    /* Resume Detect */
#define USBSTS_HSE    BIT3    /* Host System Error - basically PCI problems */
#define USBSTS_HCPE   BIT4    /* Host Controller Process Error - the scripts were buggy */
#define USBSTS_HCH    BIT5    /* HC Halted */

/* Interrupt enable register */
#define USBINTR         4       /* Interrupt Enable Register 04-05h */
#define USBINTR_TIMEOUT BIT0    /* Timeout/CRC error enable */
#define USBINTR_RESUME  BIT1    /* Resume interrupt enable */
#define USBINTR_IOC     BIT2    /* Interrupt On Complete enable */
#define USBINTR_SP      BIT3    /* Short packet interrupt enable */

/* Frame Number Register Offset 06-08h */
#define USBFRNUM  6

/* Frame List Base Address Register Offset 08-0Bh */
#define USBFLBASEADD  8

/* Start of Frame Modify Register Offset 0Ch */
#define USBSOF  0x0c

/* USB port status and control registers */
#define USBPORTSC1            0x10      /*Port 1 offset 10-11h */
#define USBPORTSC2            0x12      /*Port 2 offset 12-13h */

#define USBPORTSC_CCS         BIT0      /* Current Connect Status ("device present") */
#define USBPORTSC_CSC         BIT1      /* Connect Status Change */
#define USBPORTSC_PED         BIT2      /* Port Enable / Disable */
#define USBPORTSC_PEDC        BIT3      /* Port Enable / Disable Change */
#define USBPORTSC_LSL         BIT4      /* Line Status Low bit*/
#define USBPORTSC_LSH         BIT5      /* Line Status High bit*/
#define USBPORTSC_RD          BIT6      /* Resume Detect */
#define USBPORTSC_LSDA        BIT8      /* Low Speed Device Attached */
#define USBPORTSC_PR          BIT9      /* Port Reset */
#define USBPORTSC_SUSP        BIT12     /* Suspend */

#define SETUP_PACKET_ID       0x2D
#define INPUT_PACKET_ID       0x69
#define OUTPUT_PACKET_ID      0xE1
#define ERROR_PACKET_ID       0x55

#define STALL_1_MICRO_SECOND  1
#define STALL_1_MILLI_SECOND  1000


#pragma pack(1)

typedef struct {
  UINT32  FrameListPtrTerminate : 1;
  UINT32  FrameListPtrQSelect : 1;
  UINT32  FrameListRsvd : 2;
  UINT32  FrameListPtr : 28;
} FRAMELIST_ENTRY;

typedef struct {
  UINT32  QHHorizontalTerminate : 1;
  UINT32  QHHorizontalQSelect : 1;
  UINT32  QHHorizontalRsvd : 2;
  UINT32  QHHorizontalPtr : 28;
  UINT32  QHVerticalTerminate : 1;
  UINT32  QHVerticalQSelect : 1;
  UINT32  QHVerticalRsvd : 2;
  UINT32  QHVerticalPtr : 28;
} QUEUE_HEAD;

typedef struct {
  QUEUE_HEAD  QueueHead;
  UINT32      Reserved1;
  UINT32      Reserved2;
  VOID        *PtrNext;
  VOID        *PtrDown;
  VOID        *Reserved3;
  UINT32      Reserved4;
} QH_STRUCT;

typedef struct {
  UINT32  TDLinkPtrTerminate : 1;
  UINT32  TDLinkPtrQSelect : 1;
  UINT32  TDLinkPtrDepthSelect : 1;
  UINT32  TDLinkPtrRsvd : 1;
  UINT32  TDLinkPtr : 28;
  UINT32  TDStatusActualLength : 11;
  UINT32  TDStatusRsvd : 5;
  UINT32  TDStatus : 8;
  UINT32  TDStatusIOC : 1;
  UINT32  TDStatusIOS : 1;
  UINT32  TDStatusLS : 1;
  UINT32  TDStatusErr : 2;
  UINT32  TDStatusSPD : 1;
  UINT32  TDStatusRsvd2 : 2;
  UINT32  TDTokenPID : 8;
  UINT32  TDTokenDevAddr : 7;
  UINT32  TDTokenEndPt : 4;
  UINT32  TDTokenDataToggle : 1;
  UINT32  TDTokenRsvd : 1;
  UINT32  TDTokenMaxLen : 11;
  UINT32  TDBufferPtr;
} TD;

typedef struct {
  TD      TDData;
  UINT8   *PtrTDBuffer;
  VOID    *PtrNextTD;
  VOID    *PtrNextQH;
  UINT16  TDBufferLength;
  UINT16  Reserved;
} TD_STRUCT;

#pragma pack()

typedef struct _MEMORY_MANAGE_HEADER MEMORY_MANAGE_HEADER;

struct _MEMORY_MANAGE_HEADER {
  UINT8                         *BitArrayPtr;
  UINTN                         BitArraySizeInBytes;
  UINT8                         *MemoryBlockPtr;
  UINTN                         MemoryBlockSizeInBytes;
  MEMORY_MANAGE_HEADER          *Next;
};

#define USB_UHC_DEV_SIGNATURE SIGNATURE_32 ('p', 'u', 'h', 'c')
typedef struct {
  UINTN                       Signature;
  PEI_USB_HOST_CONTROLLER_PPI UsbHostControllerPpi;
  EFI_PEI_PPI_DESCRIPTOR      PpiDescriptor;

  UINT32                      UsbHostControllerBaseAddress;
  FRAMELIST_ENTRY             *FrameListEntry;
  QH_STRUCT                   *ConfigQH;
  QH_STRUCT                   *BulkQH;
  //
  // Header1 used for QH,TD memory blocks management
  //
  MEMORY_MANAGE_HEADER        *Header1;

} USB_UHC_DEV;

#define PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS(a)  CR (a, USB_UHC_DEV, UsbHostControllerPpi, USB_UHC_DEV_SIGNATURE)

/**
  Submits control transfer to a target USB device.
  
  @param  PeiServices            The pointer of EFI_PEI_SERVICES.
  @param  This                   The pointer of PEI_USB_HOST_CONTROLLER_PPI.
  @param  DeviceAddress          The target device address.
  @param  DeviceSpeed            Target device speed.
  @param  MaximumPacketLength    Maximum packet size the default control transfer 
                                 endpoint is capable of sending or receiving.
  @param  Request                USB device request to send.
  @param  TransferDirection      Specifies the data direction for the data stage.
  @param  Data                   Data buffer to be transmitted or received from USB device.
  @param  DataLength             The size (in bytes) of the data buffer.
  @param  TimeOut                Indicates the maximum timeout, in millisecond.
  @param  TransferResult         Return the result of this control transfer.

  @retval EFI_SUCCESS            Transfer was completed successfully.
  @retval EFI_OUT_OF_RESOURCES   The transfer failed due to lack of resources.
  @retval EFI_INVALID_PARAMETER  Some parameters are invalid.
  @retval EFI_TIMEOUT            Transfer failed due to timeout.
  @retval EFI_DEVICE_ERROR       Transfer failed due to host controller or device error.

**/
EFI_STATUS
EFIAPI
UhcControlTransfer (
  IN EFI_PEI_SERVICES               **PeiServices,
  IN PEI_USB_HOST_CONTROLLER_PPI    * This,
  IN     UINT8                      DeviceAddress,
  IN     UINT8                      DeviceSpeed,
  IN     UINT8                      MaximumPacketLength,
  IN     EFI_USB_DEVICE_REQUEST     * Request,
  IN     EFI_USB_DATA_DIRECTION     TransferDirection,
  IN OUT VOID                       *Data OPTIONAL,
  IN OUT UINTN                      *DataLength OPTIONAL,
  IN     UINTN                      TimeOut,
  OUT    UINT32                     *TransferResult
  );

/**
  Submits bulk transfer to a bulk endpoint of a USB device.
  
  @param  PeiServices           The pointer of EFI_PEI_SERVICES.
  @param  This                  The pointer of PEI_USB_HOST_CONTROLLER_PPI.
  @param  DeviceAddress         Target device address.
  @param  EndPointAddress       Endpoint number and its direction in bit 7.
  @param  MaximumPacketLength   Maximum packet size the endpoint is capable of 
                                sending or receiving.
  @param  Data                  Array of pointers to the buffers of data to transmit 
                                from or receive into.
  @param  DataLength            The lenght of the data buffer.
  @param  DataToggle            On input, the initial data toggle for the transfer;
                                On output, it is updated to to next data toggle to use of 
                                the subsequent bulk transfer.
  @param  TimeOut               Indicates the maximum time, in millisecond, which the
                                transfer is allowed to complete.
  @param  TransferResult        A pointer to the detailed result information of the
                                bulk transfer.

  @retval EFI_SUCCESS           The transfer was completed successfully.
  @retval EFI_OUT_OF_RESOURCES  The transfer failed due to lack of resource.
  @retval EFI_INVALID_PARAMETER Parameters are invalid.
  @retval EFI_TIMEOUT           The transfer failed due to timeout.
  @retval EFI_DEVICE_ERROR      The transfer failed due to host controller error.

**/
EFI_STATUS
EFIAPI
UhcBulkTransfer (
  IN EFI_PEI_SERVICES               **PeiServices,
  IN PEI_USB_HOST_CONTROLLER_PPI    *This,
  IN  UINT8                         DeviceAddress,
  IN  UINT8                         EndPointAddress,
  IN  UINT8                         MaximumPacketLength,
  IN OUT VOID                       *Data,
  IN OUT UINTN                      *DataLength,
  IN OUT UINT8                      *DataToggle,
  IN  UINTN                         TimeOut,
  OUT UINT32                        *TransferResult
  );

/**
  Retrieves the number of root hub ports.

  @param[in]  PeiServices   The pointer to the PEI Services Table.
  @param[in]  This          The pointer to this instance of the 
                            PEI_USB_HOST_CONTROLLER_PPI.
  @param[out] PortNumber    The pointer to the number of the root hub ports.                                
                                
  @retval EFI_SUCCESS           The port number was retrieved successfully.
  @retval EFI_INVALID_PARAMETER PortNumber is NULL.

**/
EFI_STATUS
EFIAPI
UhcGetRootHubPortNumber (
  IN EFI_PEI_SERVICES               **PeiServices,
  IN PEI_USB_HOST_CONTROLLER_PPI    *This,
  OUT UINT8                         *PortNumber
  );

/**
  Retrieves the current status of a USB root hub port.
  
  @param  PeiServices            The pointer of EFI_PEI_SERVICES.
  @param  This                   The pointer of PEI_USB_HOST_CONTROLLER_PPI.
  @param  PortNumber             The root hub port to retrieve the state from.  
  @param  PortStatus             Variable to receive the port state.

  @retval EFI_SUCCESS            The status of the USB root hub port specified.
                                 by PortNumber was returned in PortStatus.
  @retval EFI_INVALID_PARAMETER  PortNumber is invalid.

**/
EFI_STATUS
EFIAPI
UhcGetRootHubPortStatus (
  IN EFI_PEI_SERVICES               **PeiServices,
  IN PEI_USB_HOST_CONTROLLER_PPI    *This,
  IN  UINT8                         PortNumber,
  OUT EFI_USB_PORT_STATUS           *PortStatus
  );

/**
  Sets a feature for the specified root hub port.
  
  @param  PeiServices           The pointer of EFI_PEI_SERVICES
  @param  This                  The pointer of PEI_USB_HOST_CONTROLLER_PPI
  @param  PortNumber            Root hub port to set.
  @param  PortFeature           Feature to set.

  @retval EFI_SUCCESS            The feature specified by PortFeature was set.
  @retval EFI_INVALID_PARAMETER  PortNumber is invalid or PortFeature is invalid.
  @retval EFI_TIMEOUT            The time out occurred.

**/
EFI_STATUS
EFIAPI
UhcSetRootHubPortFeature (
  IN EFI_PEI_SERVICES               **PeiServices,
  IN PEI_USB_HOST_CONTROLLER_PPI    *This,
  IN UINT8                          PortNumber,
  IN EFI_USB_PORT_FEATURE           PortFeature
  );

/**
  Clears a feature for the specified root hub port.
  
  @param  PeiServices           The pointer of EFI_PEI_SERVICES.
  @param  This                  The pointer of PEI_USB_HOST_CONTROLLER_PPI.
  @param  PortNumber            Specifies the root hub port whose feature
                                is requested to be cleared.
  @param  PortFeature           Indicates the feature selector associated with the
                                feature clear request.

  @retval EFI_SUCCESS            The feature specified by PortFeature was cleared 
                                 for the USB root hub port specified by PortNumber.
  @retval EFI_INVALID_PARAMETER  PortNumber is invalid or PortFeature is invalid.

**/
EFI_STATUS
EFIAPI
UhcClearRootHubPortFeature (
  IN EFI_PEI_SERVICES               **PeiServices,
  IN PEI_USB_HOST_CONTROLLER_PPI    *This,
  IN UINT8                          PortNumber,
  IN EFI_USB_PORT_FEATURE           PortFeature
  );

/**
  Initialize UHCI.

  @param  UhcDev                 UHCI Device.

  @retval EFI_SUCCESS            UHCI successfully initialized.
  @retval EFI_OUT_OF_RESOURCES   Resource can not be allocated.

**/
EFI_STATUS
InitializeUsbHC (
  IN USB_UHC_DEV          *UhcDev
  );

/**
  Create Frame List Structure.

  @param  UhcDev                 UHCI device.

  @retval EFI_OUT_OF_RESOURCES   Can't allocate memory resources.
  @retval EFI_SUCCESS            Success.

**/
EFI_STATUS
CreateFrameList (
  USB_UHC_DEV             *UhcDev
  );

/**
  Read a 16bit width data from Uhc HC IO space register.
  
  @param  UhcDev  The UHCI device.
  @param  Port    The IO space address of the register.

  @retval the register content read.

**/
UINT16
USBReadPortW (
  IN  USB_UHC_DEV   *UhcDev,
  IN  UINT32        Port
  );

/**
  Write a 16bit width data into Uhc HC IO space register.
  
  @param  UhcDev  The UHCI device.
  @param  Port    The IO space address of the register.
  @param  Data    The data written into the register.

**/
VOID
USBWritePortW (
  IN  USB_UHC_DEV   *UhcDev,
  IN  UINT32        Port,
  IN  UINT16        Data
  );

/**
  Write a 32bit width data into Uhc HC IO space register.
  
  @param  UhcDev  The UHCI device.
  @param  Port    The IO space address of the register.
  @param  Data    The data written into the register.

**/
VOID
USBWritePortDW (
  IN  USB_UHC_DEV   *UhcDev,
  IN  UINT32        Port,
  IN  UINT32        Data
  );

/**
  Clear the content of UHCI's Status Register.
  
  @param  UhcDev       The UHCI device.
  @param  StatusAddr   The IO space address of the register.

**/
VOID
ClearStatusReg (
  IN  USB_UHC_DEV   *UhcDev,
  IN  UINT32        StatusAddr
  );

/**
  Check whether the host controller operates well.

  @param  UhcDev        The UHCI device.
  @param  StatusRegAddr The io address of status register.

  @retval TRUE          Host controller is working.
  @retval FALSE         Host controller is halted or system error.

**/
BOOLEAN
IsStatusOK (
  IN USB_UHC_DEV     *UhcDev,
  IN UINT32          StatusRegAddr
  );

/**
  Get Current Frame Number.

  @param  UhcDev          The UHCI device.
  @param  FrameNumberAddr The address of frame list register.

  @retval The content of the frame list register.

**/
UINT16
GetCurrentFrameNumber (
  IN USB_UHC_DEV   *UhcDev,
  IN UINT32        FrameNumberAddr
  );

/**
  Set Frame List Base Address.

  @param  UhcDev           The UHCI device.
  @param  FrameListRegAddr The address of frame list register.
  @param  Addr             The address of frame list table.

**/
VOID
SetFrameListBaseAddress (
  IN USB_UHC_DEV   *UhcDev,
  IN UINT32        FrameListRegAddr,
  IN UINT32        Addr
  );

/**
  Create QH and initialize.

  @param  UhcDev               The UHCI device.
  @param  PtrQH                Place to store QH_STRUCT pointer.

  @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
  @retval EFI_SUCCESS        Success.

**/
EFI_STATUS
CreateQH (
  IN  USB_UHC_DEV  *UhcDev,
  OUT QH_STRUCT    **PtrQH
  );

/**
  Set the horizontal link pointer in QH.

  @param  PtrQH               Place to store QH_STRUCT pointer.
  @param  PtrNext             Place to the next QH_STRUCT.

**/
VOID
SetQHHorizontalLinkPtr (
  IN QH_STRUCT  *PtrQH,
  IN VOID       *PtrNext
  );

/**
  Get the horizontal link pointer in QH.

  @param  PtrQH     Place to store QH_STRUCT pointer.

  @retval The horizontal link pointer in QH.

**/
VOID  *
GetQHHorizontalLinkPtr (
  IN QH_STRUCT  *PtrQH
  );

/**
  Set a QH or TD horizontally to be connected with a specific QH.

  @param  PtrQH      Place to store QH_STRUCT pointer.
  @param  IsQH       Specify QH or TD is connected.

**/
VOID
SetQHHorizontalQHorTDSelect (
  IN QH_STRUCT  *PtrQH,
  IN BOOLEAN    IsQH
  );

/**
  Set the horizontal validor bit in QH.

  @param  PtrQH      Place to store QH_STRUCT pointer.
  @param  IsValid    Specify the horizontal linker is valid or not.

**/
VOID
SetQHHorizontalValidorInvalid (
  IN QH_STRUCT  *PtrQH,
  IN BOOLEAN    IsValid
  );

/**
  Set the vertical link pointer in QH.

  @param  PtrQH       Place to store QH_STRUCT pointer.
  @param  PtrNext     Place to the next QH_STRUCT.

**/
VOID
SetQHVerticalLinkPtr (
  IN QH_STRUCT  *PtrQH,
  IN VOID       *PtrNext
  );

/**
  Set a QH or TD vertically to be connected with a specific QH.

  @param  PtrQH      Place to store QH_STRUCT pointer.
  @param  IsQH       Specify QH or TD is connected.

**/
VOID
SetQHVerticalQHorTDSelect (
  IN QH_STRUCT  *PtrQH,
  IN BOOLEAN    IsQH
  );

/**
  Set the vertical validor bit in QH.

  @param  PtrQH      Place to store QH_STRUCT pointer.
  @param  IsValid    Specify the vertical linker is valid or not.

**/
VOID
SetQHVerticalValidorInvalid (
  IN QH_STRUCT  *PtrQH,
  IN BOOLEAN    IsValid
  );

/**
  Get the vertical validor bit in QH.

  @param  PtrQH      Place to store QH_STRUCT pointer.

  @retval The vertical linker is valid or not.

**/
BOOLEAN
GetQHHorizontalValidorInvalid (
  IN QH_STRUCT  *PtrQH
  );

/**
  Allocate TD or QH Struct.

  @param  UhcDev                 The UHCI device.
  @param  Size                   The size of allocation.
  @param  PtrStruct              Place to store TD_STRUCT pointer.

  @return EFI_SUCCESS            Allocate successfully.
  @retval EFI_OUT_OF_RESOURCES   Can't allocate memory resource.

**/
EFI_STATUS
AllocateTDorQHStruct (
  IN  USB_UHC_DEV   *UhcDev,
  IN  UINT32        Size,
  OUT VOID          **PtrStruct
  );

/**
  Create a TD Struct.

  @param  UhcDev                 The UHCI device.
  @param  PtrTD                  Place to store TD_STRUCT pointer.

  @return EFI_SUCCESS            Allocate successfully.
  @retval EFI_OUT_OF_RESOURCES   Can't allocate memory resource.

**/
EFI_STATUS
CreateTD (
  IN  USB_UHC_DEV     *UhcDev,
  OUT TD_STRUCT       **PtrTD
  );

/**
  Generate Setup Stage TD.

  @param  UhcDev       The UHCI device.
  @param  DevAddr      Device address.
  @param  Endpoint     Endpoint number.
  @param  DeviceSpeed  Device Speed.
  @param  DevRequest   Device reuquest.
  @param  RequestLen   Request length.
  @param  PtrTD        TD_STRUCT generated.

  @return EFI_SUCCESS            Generate setup stage TD successfully.
  @retval EFI_OUT_OF_RESOURCES   Can't allocate memory resource.

**/
EFI_STATUS
GenSetupStageTD (
  IN  USB_UHC_DEV     *UhcDev,
  IN  UINT8           DevAddr,
  IN  UINT8           Endpoint,
  IN  UINT8           DeviceSpeed,
  IN  UINT8           *DevRequest,
  IN  UINT8           RequestLen,
  OUT TD_STRUCT       **PtrTD
  );

/**
  Generate Data Stage TD.

  @param  UhcDev       The UHCI device.
  @param  DevAddr      Device address.
  @param  Endpoint     Endpoint number.
  @param  PtrData      Data buffer.
  @param  Len          Data length.
  @param  PktID        PacketID.
  @param  Toggle       Data toggle value.
  @param  DeviceSpeed  Device Speed.
  @param  PtrTD        TD_STRUCT generated.

  @return EFI_SUCCESS            Generate data stage TD successfully.
  @retval EFI_OUT_OF_RESOURCES   Can't allocate memory resource.

**/
EFI_STATUS
GenDataTD (
  IN  USB_UHC_DEV     *UhcDev,
  IN  UINT8           DevAddr,
  IN  UINT8           Endpoint,
  IN  UINT8           *PtrData,
  IN  UINT8           Len,
  IN  UINT8           PktID,
  IN  UINT8           Toggle,
  IN  UINT8           DeviceSpeed,
  OUT TD_STRUCT       **PtrTD
  );

/**
  Generate Status Stage TD.

  @param  UhcDev       The UHCI device.
  @param  DevAddr      Device address.
  @param  Endpoint     Endpoint number.
  @param  PktID        PacketID.
  @param  DeviceSpeed  Device Speed.
  @param  PtrTD        TD_STRUCT generated.

  @return EFI_SUCCESS            Generate status stage TD successfully.
  @retval EFI_OUT_OF_RESOURCES   Can't allocate memory resource.

**/
EFI_STATUS
CreateStatusTD (
  IN  USB_UHC_DEV     *UhcDev,
  IN  UINT8           DevAddr,
  IN  UINT8           Endpoint,
  IN  UINT8           PktID,
  IN  UINT8           DeviceSpeed,
  OUT TD_STRUCT       **PtrTD
  );

/**
  Set the link pointer validor bit in TD.

  @param  PtrTDStruct  Place to store TD_STRUCT pointer.
  @param  IsValid      Specify the linker pointer is valid or not.

**/
VOID
SetTDLinkPtrValidorInvalid (
  IN  TD_STRUCT *PtrTDStruct,
  IN  BOOLEAN   IsValid
  );

/**
  Set the Link Pointer pointing to a QH or TD.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.
  @param  IsQH          Specify QH or TD is connected.

**/
VOID
SetTDLinkPtrQHorTDSelect (
  IN  TD_STRUCT *PtrTDStruct,
  IN  BOOLEAN   IsQH
  );

/**
  Set the traverse is depth-first or breadth-first.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.
  @param  IsDepth       Specify the traverse is depth-first or breadth-first.

**/
VOID
SetTDLinkPtrDepthorBreadth (
  IN  TD_STRUCT *PtrTDStruct,
  IN  BOOLEAN   IsDepth
  );

/**
  Set TD Link Pointer in TD.

  @param  PtrTDStruct  Place to store TD_STRUCT pointer.
  @param  PtrNext      Place to the next TD_STRUCT.

**/
VOID
SetTDLinkPtr (
  IN  TD_STRUCT *PtrTDStruct,
  IN  VOID      *PtrNext
  );

/**
  Get TD Link Pointer.

  @param  PtrTDStruct     Place to store TD_STRUCT pointer.

  @retval Get TD Link Pointer in TD.

**/
VOID*
GetTDLinkPtr (
  IN  TD_STRUCT *PtrTDStruct
  );

/**
  Get the information about whether the Link Pointer field pointing to
  a QH or a TD.

  @param  PtrTDStruct     Place to store TD_STRUCT pointer.

  @retval whether the Link Pointer field pointing to a QH or a TD.

**/
BOOLEAN
IsTDLinkPtrQHOrTD (
  IN  TD_STRUCT *PtrTDStruct
  );

/**
  Enable/Disable short packet detection mechanism.

  @param  PtrTDStruct  Place to store TD_STRUCT pointer.
  @param  IsEnable     Enable or disable short packet detection mechanism.

**/
VOID
EnableorDisableTDShortPacket (
  IN  TD_STRUCT *PtrTDStruct,
  IN  BOOLEAN   IsEnable
  );

/**
  Set the max error counter in TD.

  @param  PtrTDStruct  Place to store TD_STRUCT pointer.
  @param  MaxErrors    The number of allowable error.

**/
VOID
SetTDControlErrorCounter (
  IN  TD_STRUCT *PtrTDStruct,
  IN  UINT8     MaxErrors
  );

/**
  Set the TD is targeting a low-speed device or not.

  @param  PtrTDStruct       Place to store TD_STRUCT pointer.
  @param  IsLowSpeedDevice  Whether The device is low-speed.

**/
VOID
SetTDLoworFullSpeedDevice (
  IN  TD_STRUCT *PtrTDStruct,
  IN  BOOLEAN   IsLowSpeedDevice
  );

/**
  Set the TD is isochronous transfer type or not.

  @param  PtrTDStruct       Place to store TD_STRUCT pointer.
  @param  IsIsochronous     Whether the transaction isochronous transfer type.

**/
VOID
SetTDControlIsochronousorNot (
  IN  TD_STRUCT *PtrTDStruct,
  IN  BOOLEAN   IsIsochronous
  );

/**
  Set if UCHI should issue an interrupt on completion of the frame
  in which this TD is executed

  @param  PtrTDStruct       Place to store TD_STRUCT pointer.
  @param  IsSet             Whether HC should issue an interrupt on completion.

**/
VOID
SetorClearTDControlIOC (
  IN  TD_STRUCT *PtrTDStruct,
  IN  BOOLEAN   IsSet
  );

/**
  Set if the TD is active and can be executed.

  @param  PtrTDStruct       Place to store TD_STRUCT pointer.
  @param  IsActive          Whether the TD is active and can be executed.

**/
VOID
SetTDStatusActiveorInactive (
  IN  TD_STRUCT *PtrTDStruct,
  IN  BOOLEAN   IsActive
  );

/**
  Specifies the maximum number of data bytes allowed for the transfer.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.
  @param  MaxLen        The maximum number of data bytes allowed.

  @retval The allowed maximum number of data.
**/
UINT16
SetTDTokenMaxLength (
  IN  TD_STRUCT *PtrTDStruct,
  IN  UINT16    MaxLen
  );

/**
  Set the data toggle bit to DATA1.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.

**/
VOID
SetTDTokenDataToggle1 (
  IN  TD_STRUCT *PtrTDStruct
  );

/**
  Set the data toggle bit to DATA0.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.

**/
VOID
SetTDTokenDataToggle0 (
  IN  TD_STRUCT *PtrTDStruct
  );

/**
  Set EndPoint Number the TD is targeting at.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.
  @param  EndPoint      The Endport number of the target.

**/
VOID
SetTDTokenEndPoint (
  IN  TD_STRUCT *PtrTDStruct,
  IN  UINTN     EndPoint
  );

/**
  Set Device Address the TD is targeting at.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.
  @param  DevAddr       The Device Address of the target.

**/
VOID
SetTDTokenDeviceAddress (
  IN  TD_STRUCT *PtrTDStruct,
  IN  UINTN     DevAddr
  );

/**
  Set Packet Identification the TD is targeting at.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.
  @param  PacketID      The Packet Identification of the target.

**/
VOID
SetTDTokenPacketID (
  IN  TD_STRUCT *PtrTDStruct,
  IN  UINT8     PacketID
  );

/**
  Set the beginning address of the data buffer that will be used
  during the transaction.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.

**/
VOID
SetTDDataBuffer (
  IN  TD_STRUCT *PtrTDStruct
  );

/**
  Detect whether the TD is active.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.

  @retval The TD is active or not.

**/
BOOLEAN
IsTDStatusActive (
  IN  TD_STRUCT *PtrTDStruct
  );

/**
  Detect whether the TD is stalled.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.

  @retval The TD is stalled or not.

**/
BOOLEAN
IsTDStatusStalled (
  IN  TD_STRUCT *PtrTDStruct
  );

/**
  Detect whether Data Buffer Error is happened.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.

  @retval The Data Buffer Error is happened or not.

**/
BOOLEAN
IsTDStatusBufferError (
  IN  TD_STRUCT *PtrTDStruct
  );

/**
  Detect whether Babble Error is happened.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.

  @retval The Babble Error is happened or not.

**/
BOOLEAN
IsTDStatusBabbleError (
  IN  TD_STRUCT *PtrTDStruct
  );

/**
  Detect whether NAK is received.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.

  @retval The NAK is received or not.

**/
BOOLEAN
IsTDStatusNAKReceived (
  IN  TD_STRUCT *PtrTDStruct
  );

/**
  Detect whether CRC/Time Out Error is encountered.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.

  @retval The CRC/Time Out Error is encountered or not.

**/
BOOLEAN
IsTDStatusCRCTimeOutError (
  IN  TD_STRUCT *PtrTDStruct
  );

/**
  Detect whether Bitstuff Error is received.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.

  @retval The Bitstuff Error is received or not.

**/
BOOLEAN
IsTDStatusBitStuffError (
  IN  TD_STRUCT *PtrTDStruct
  );

/**
  Retrieve the actual number of bytes that were tansferred.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.

  @retval The actual number of bytes that were tansferred.

**/
UINT16
GetTDStatusActualLength (
  IN  TD_STRUCT *PtrTDStruct
  );

/**
  Retrieve the information of whether the Link Pointer field is valid or not.

  @param  PtrTDStruct   Place to store TD_STRUCT pointer.

  @retval The linker pointer field is valid or not.

**/
BOOLEAN
GetTDLinkPtrValidorInvalid (
  IN  TD_STRUCT *PtrTDStruct
  );

/**
  Count TD Number from PtrFirstTD.

  @param  PtrFirstTD   Place to store TD_STRUCT pointer.

  @retval The queued TDs number.

**/
UINTN
CountTDsNumber (
  IN  TD_STRUCT *PtrFirstTD
  );

/**
  Link TD To QH.

  @param  PtrQH   Place to store QH_STRUCT pointer.
  @param  PtrTD   Place to store TD_STRUCT pointer.

**/
VOID
LinkTDToQH (
  IN  QH_STRUCT *PtrQH,
  IN  TD_STRUCT *PtrTD
  );

/**
  Link TD To TD.

  @param  PtrPreTD  Place to store TD_STRUCT pointer.
  @param  PtrTD     Place to store TD_STRUCT pointer.

**/
VOID
LinkTDToTD (
  IN  TD_STRUCT *PtrPreTD,
  IN  TD_STRUCT *PtrTD
  );

/**
  Execute Control Transfer.

  @param  UhcDev            The UCHI device.
  @param  PtrTD             A pointer to TD_STRUCT data.
  @param  ActualLen         Actual transfer Length.
  @param  TimeOut           TimeOut value.
  @param  TransferResult    Transfer Result.

  @return EFI_DEVICE_ERROR  The transfer failed due to transfer error.
  @return EFI_TIMEOUT       The transfer failed due to time out.
  @return EFI_SUCCESS       The transfer finished OK.

**/
EFI_STATUS
ExecuteControlTransfer (
  IN  USB_UHC_DEV *UhcDev,
  IN  TD_STRUCT   *PtrTD,
  OUT UINTN       *ActualLen,
  IN  UINTN       TimeOut,
  OUT UINT32      *TransferResult
  );

/**
  Execute Bulk Transfer.

  @param  UhcDev            The UCHI device.
  @param  PtrTD             A pointer to TD_STRUCT data.
  @param  ActualLen         Actual transfer Length.
  @param  DataToggle        DataToggle value.
  @param  TimeOut           TimeOut value.
  @param  TransferResult    Transfer Result.

  @return EFI_DEVICE_ERROR  The transfer failed due to transfer error.
  @return EFI_TIMEOUT       The transfer failed due to time out.
  @return EFI_SUCCESS       The transfer finished OK.

**/
EFI_STATUS
ExecBulkTransfer (
  IN     USB_UHC_DEV *UhcDev,
  IN     TD_STRUCT   *PtrTD,
  IN OUT UINTN     *ActualLen,
  IN     UINT8     *DataToggle,
  IN     UINTN     TimeOut,
  OUT    UINT32    *TransferResult
  );

/**
  Delete Queued TDs.

  @param  UhcDev       The UCHI device.
  @param  PtrFirstTD   Place to store TD_STRUCT pointer.

**/
VOID
DeleteQueuedTDs (
  IN USB_UHC_DEV     *UhcDev,
  IN TD_STRUCT       *PtrFirstTD
  );

/**
  Check TDs Results.

  @param  PtrTD               A pointer to TD_STRUCT data.
  @param  Result              The result to return.
  @param  ErrTDPos            The Error TD position.
  @param  ActualTransferSize  Actual transfer size.

  @retval The TD is executed successfully or not.

**/
BOOLEAN
CheckTDsResults (
  IN  TD_STRUCT               *PtrTD,
  OUT UINT32                  *Result,
  OUT UINTN                   *ErrTDPos,
  OUT UINTN                   *ActualTransferSize
  );

/**
  Create Memory Block.

  @param  UhcDev                   The UCHI device.
  @param  MemoryHeader             The Pointer to allocated memory block.
  @param  MemoryBlockSizeInPages   The page size of memory block to be allocated.

  @retval EFI_OUT_OF_RESOURCES   Can't allocate memory resources.
  @retval EFI_SUCCESS            Success.

**/
EFI_STATUS
CreateMemoryBlock (
  IN  USB_UHC_DEV           *UhcDev,
  OUT MEMORY_MANAGE_HEADER  **MemoryHeader,
  IN  UINTN                 MemoryBlockSizeInPages
  );

/**
  Initialize UHCI memory management.

  @param  UhcDev                 The UCHI device.

  @retval EFI_OUT_OF_RESOURCES   Can't allocate memory resources.
  @retval EFI_SUCCESS            Success.

**/
EFI_STATUS
InitializeMemoryManagement (
  IN USB_UHC_DEV           *UhcDev
  );

/**
  Initialize UHCI memory management.

  @param  UhcDev           The UCHI device.
  @param  Pool             Buffer pointer to store the buffer pointer.
  @param  AllocSize        The size of the pool to be allocated.

  @retval EFI_OUT_OF_RESOURCES   Can't allocate memory resources.
  @retval EFI_SUCCESS            Success.

**/
EFI_STATUS
UhcAllocatePool (
  IN  USB_UHC_DEV     *UhcDev,
  OUT UINT8           **Pool,
  IN  UINTN           AllocSize
  );

/**
  Alloc Memory In MemoryBlock.

  @param  MemoryHeader           The pointer to memory manage header.
  @param  Pool                   Buffer pointer to store the buffer pointer.
  @param  NumberOfMemoryUnit     The size of the pool to be allocated.

  @retval EFI_OUT_OF_RESOURCES   Can't allocate memory resources.
  @retval EFI_SUCCESS            Success.

**/
EFI_STATUS
AllocMemInMemoryBlock (
  IN  MEMORY_MANAGE_HEADER  *MemoryHeader,
  OUT VOID                  **Pool,
  IN  UINTN                 NumberOfMemoryUnit
  );

/**
  Uhci Free Pool.

  @param  UhcDev                 The UHCI device.
  @param  Pool                   A pointer to store the buffer address.
  @param  AllocSize              The size of the pool to be freed.

**/
VOID
UhcFreePool (
  IN USB_UHC_DEV     *UhcDev,
  IN UINT8           *Pool,
  IN UINTN           AllocSize
  );

/**
  Insert a new memory header into list.

  @param  MemoryHeader         A pointer to the memory header list.
  @param  NewMemoryHeader      A new memory header to be inserted into the list.

**/
VOID
InsertMemoryHeaderToList (
  IN MEMORY_MANAGE_HEADER  *MemoryHeader,
  IN MEMORY_MANAGE_HEADER  *NewMemoryHeader
  );

/**
  Judge the memory block in the memory header is empty or not.

  @param  MemoryHeaderPtr   A pointer to the memory header list.

  @retval Whether the memory block in the memory header is empty or not.

**/
BOOLEAN
IsMemoryBlockEmptied (
  IN MEMORY_MANAGE_HEADER  *MemoryHeaderPtr
  );

/**
  remove a memory header from list.

  @param  FirstMemoryHeader   A pointer to the memory header list.
  @param  FreeMemoryHeader    A memory header to be removed into the list.

**/
VOID
DelinkMemoryBlock (
  IN MEMORY_MANAGE_HEADER    *FirstMemoryHeader,
  IN MEMORY_MANAGE_HEADER    *FreeMemoryHeader
  );

#endif