audk/MdePkg/Include/Protocol/SmbusHc.h

310 lines
12 KiB
C
Raw Normal View History

/** @file
The file provides basic SMBus host controller management
and basic data transactions over the SMBus.
Copyright (c) 2006 - 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@par Revision Reference: PI
Version 1.00.
**/
#ifndef __SMBUS_HC_H__
#define __SMBUS_HC_H__
#include <Ppi/Smbus2.h>
#define EFI_SMBUS_HC_PROTOCOL_GUID \
{0xe49d33ed, 0x513d, 0x4634, { 0xb6, 0x98, 0x6f, 0x55, 0xaa, 0x75, 0x1c, 0x1b} }
typedef struct _EFI_SMBUS_HC_PROTOCOL EFI_SMBUS_HC_PROTOCOL;
/**
The Execute() function provides a standard way to execute an
operation as defined in the System Management Bus (SMBus)
Specification. The resulting transaction will be either that
the SMBus slave devices accept this transaction or that this
function returns with error. Status Codes Returned
@param This A pointer to the EFI_SMBUS_HC_PROTOCOL instance.
SlaveAddress The SMBus slave address of the device
with which to communicate. Type
EFI_SMBUS_DEVICE_ADDRESS is defined in
EFI_PEI_SMBUS_PPI.Execute() in the Platform
Initialization SMBus PPI Specification.
@param Command This command is transmitted by the SMBus host
controller to the SMBus slave device and the
interpretation is SMBus slave device specific.
It can mean the offset to a list of functions
inside an SMBus slave device. Not all
operations or slave devices support this
command's registers. Type
EFI_SMBUS_DEVICE_COMMAND is defined in
EFI_PEI_SMBUS_PPI.Execute() in the Platform
Initialization SMBus PPI Specification.
Operation Signifies which particular SMBus
hardware protocol instance that it will use to
execute the SMBus transactions. This SMBus
hardware protocol is defined by the SMBus
Specification and is not related to PI
Architecture. Type EFI_SMBUS_OPERATION is
defined in EFI_PEI_SMBUS_PPI.Execute() in the
Platform Initialization SMBus PPI
Specification.
@param PecCheck Defines if Packet Error Code (PEC) checking
is required for this operation. SMBus Host
Controller Code Definitions Version 1.0
August 21, 2006 13 Length Signifies the
number of bytes that this operation will do.
The maximum number of bytes can be revision
specific and operation specific. This field
will contain the actual number of bytes that
are executed for this operation. Not all
operations require this argument.
@param Buffer Contains the value of data to execute to the
SMBus slave device. Not all operations require
this argument. The length of this buffer is
identified by Length.
@retval EFI_SUCCESS The last data that was returned from the
access matched the poll exit criteria.
@retval EFI_CRC_ERROR Checksum is not correct (PEC is
incorrect).
@retval EFI_TIMEOUT Timeout expired before the operation was
completed. Timeout is determined by the
SMBus host controller device.
@retval EFI_OUT_OF_RESOURCES The request could not be
completed due to a lack of
resources.
@retval EFI_DEVICE_ERROR The request was not completed
because a failure that was reflected
in the Host Status Register bit.
Device errors are a result of a
transaction collision, illegal
command field, unclaimed cycle (host
initiated), or bus errors
(collisions).
@retval EFI_INVALID_PARAMETER Operation is not defined in
EFI_SMBUS_OPERATION.
@retval EFI_INVALID_PARAMETER Length/Buffer is NULL for
operations except for
EfiSmbusQuickRead and
EfiSmbusQuickWrite. Length is
outside the range of valid
values.
@retval EFI_UNSUPPORTED The SMBus operation or PEC is not
supported.
@retval EFI_BUFFER_TOO_SMALL Buffer is not sufficient for
this operation.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SMBUS_HC_EXECUTE_OPERATION)(
IN CONST EFI_SMBUS_HC_PROTOCOL *This,
IN CONST EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
IN CONST EFI_SMBUS_DEVICE_COMMAND Command,
IN CONST EFI_SMBUS_OPERATION Operation,
IN CONST BOOLEAN PecCheck,
IN OUT UINTN *Length,
IN OUT VOID *Buffer
);
/**
The ArpDevice() function provides a standard way for a device driver to enumerate the entire
SMBus or specific devices on the bus.
@param This A pointer to the EFI_SMBUS_HC_PROTOCOL instance.
@param ArpAll A Boolean expression that indicates if the
host drivers need to enumerate all the devices
or enumerate only the device that is
identified by SmbusUdid. If ArpAll is TRUE,
SmbusUdid and SlaveAddress are optional. If
ArpAll is FALSE, ArpDevice will enumerate
SmbusUdid and the address will be at
SlaveAddress.
@param SmbusUdid The Unique Device Identifier (UDID) that is
associated with this device. Type
EFI_SMBUS_UDID is defined in
EFI_PEI_SMBUS_PPI.ArpDevice() in the
Platform Initialization SMBus PPI
Specification.
@param SlaveAddress The SMBus slave address that is
associated with an SMBus UDID.
@retval EFI_SUCCESS The last data that was returned from the
access matched the poll exit criteria.
@retval EFI_CRC_ERROR Checksum is not correct (PEC is
incorrect).
@retval EFI_TIMEOUT Timeout expired before the operation was
completed. Timeout is determined by the
SMBus host controller device.
@retval EFI_OUT_OF_RESOURCES The request could not be
completed due to a lack of
resources.
@retval EFI_DEVICE_ERROR The request was not completed
because a failure was reflected in
the Host Status Register bit. Device
Errors are a result of a transaction
collision, illegal command field,
unclaimed cycle (host initiated), or
bus errors (collisions).
@retval EFI_UNSUPPORTED ArpDevice, GetArpMap, and Notify are
not implemented by this driver.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SMBUS_HC_PROTOCOL_ARP_DEVICE)(
IN CONST EFI_SMBUS_HC_PROTOCOL *This,
IN CONST BOOLEAN ArpAll,
IN CONST EFI_SMBUS_UDID *SmbusUdid, OPTIONAL
IN OUT EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress OPTIONAL
);
/**
The GetArpMap() function returns the mapping of all the SMBus devices that were enumerated
by the SMBus host driver.
@param This A pointer to the EFI_SMBUS_HC_PROTOCOL instance.
@param Length Size of the buffer that contains the SMBus
device map.
@param SmbusDeviceMap The pointer to the device map as
enumerated by the SMBus controller
driver.
@retval EFI_SUCCESS The SMBus returned the current device
map.
@retval EFI_UNSUPPORTED ArpDevice, GetArpMap, and Notify are
not implemented by this driver.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SMBUS_HC_PROTOCOL_GET_ARP_MAP)(
IN CONST EFI_SMBUS_HC_PROTOCOL *This,
IN OUT UINTN *Length,
IN OUT EFI_SMBUS_DEVICE_MAP **SmbusDeviceMap
);
//
// EFI_SMBUS_NOTIFY_FUNCTION
//
typedef
EFI_STATUS
(EFIAPI *EFI_SMBUS_NOTIFY_FUNCTION)(
IN CONST EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
IN CONST UINTN Data
);
/**
The Notify() function registers all the callback functions to
allow the bus driver to call these functions when the
SlaveAddress/Data pair happens.
@param This A pointer to the EFI_SMBUS_HC_PROTOCOL instance.
@param SlaveAddress Address that the host controller detects
as sending a message and calls all the registered function.
@param Data Data that the host controller detects as sending
message and calls all the registered function.
@param NotifyFunction The function to call when the bus
driver detects the SlaveAddress and
Data pair.
@retval EFI_SUCCESS NotifyFunction was registered.
@retval EFI_UNSUPPORTED ArpDevice, GetArpMap, and Notify are
not implemented by this driver.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SMBUS_HC_PROTOCOL_NOTIFY)(
IN CONST EFI_SMBUS_HC_PROTOCOL *This,
IN CONST EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
IN CONST UINTN Data,
IN CONST EFI_SMBUS_NOTIFY_FUNCTION NotifyFunction
);
/**
The EFI_SMBUS_HC_PROTOCOL provides SMBus host controller management and basic data
transactions over SMBus. There is one EFI_SMBUS_HC_PROTOCOL instance for each SMBus
host controller.
@param Execute Executes the SMBus operation to an SMBus slave
device. See the Execute() function description.
@param ArpDevice Allows an SMBus 2.0 device(s) to be Address
Resolution Protocol (ARP).
@param GetArpMap Allows a driver to retrieve the address that
was allocated by the SMBus host controller
during enumeration/ARP. See the GetArpMap()
function description.
@param Notify Allows a driver to register for a callback
to the SMBus host controller driver when the
bus issues a notification to the bus
controller driver. See the Notify() function
description.
**/
struct _EFI_SMBUS_HC_PROTOCOL {
EFI_SMBUS_HC_EXECUTE_OPERATION Execute;
EFI_SMBUS_HC_PROTOCOL_ARP_DEVICE ArpDevice;
EFI_SMBUS_HC_PROTOCOL_GET_ARP_MAP GetArpMap;
EFI_SMBUS_HC_PROTOCOL_NOTIFY Notify;
};
extern EFI_GUID gEfiSmbusHcProtocolGuid;
#endif