audk/SourceLevelDebugPkg/DebugAgentDxe/DebugAgentDxe.c

104 lines
3.0 KiB
C
Raw Normal View History

This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
/** @file
Initialize Debug Agent in DXE by invoking Debug Agent Library.
Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <PiDxe.h>
#include <Guid/EventGroup.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/DebugAgentLib.h>
EFI_EVENT mExitBootServiceEvent;
/**
One notified function to disable Debug Timer interrupt when gBS->ExitBootServices() called.
@param[in] Event Pointer to this event
@param[in] Context Event handler private data
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
**/
VOID
EFIAPI
DisableDebugTimerExitBootService (
EFI_EVENT Event,
VOID *Context
)
{
SaveAndSetDebugTimerInterrupt (FALSE);
}
/**
The Entry Point for Debug Agent Dxe driver.
It will invoke Debug Agent Library to enable source debugging feature in DXE phase.
@param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS The entry point is executed successfully.
@retval other Some error occurs when initialzed Debug Agent.
**/
EFI_STATUS
EFIAPI
DebugAgentDxeInitialize(
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
Status = EFI_UNSUPPORTED;
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
InitializeDebugAgent (DEBUG_AGENT_INIT_DXE_LOAD, &Status, NULL);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Create event to disable Debug Timer interrupt when exit boot service.
//
Status = gBS->CreateEventEx (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
DisableDebugTimerExitBootService,
NULL,
&gEfiEventExitBootServicesGuid,
&mExitBootServiceEvent
);
return Status;
}
/**
This is the unload handle for Debug Agent Dxe driver.
It will invoke Debug Agent Library to disable source debugging feature.
@param[in] ImageHandle The drivers' driver image.
@retval EFI_SUCCESS The image is unloaded.
@retval Others Failed to unload the image.
**/
EFI_STATUS
EFIAPI
DebugAgentDxeUnload (
IN EFI_HANDLE ImageHandle
)
{
EFI_STATUS Status;
Status = EFI_UNSUPPORTED;
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
InitializeDebugAgent (DEBUG_AGENT_INIT_DXE_UNLOAD, &Status, NULL);
return Status;
}