audk/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h

/** @file
Private Header file for Usb Host Controller PEIM

Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
  
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution.  The
full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef _RECOVERY_EHC_H_
#define _RECOVERY_EHC_H_

#include <PiPei.h>

#include <Ppi/UsbController.h>
#include <Ppi/Usb2HostController.h>

#include <Library/DebugLib.h>
#include <Library/PeimEntryPoint.h>
#include <Library/PeiServicesLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/TimerLib.h>
#include <Library/IoLib.h>

typedef struct _PEI_USB2_HC_DEV PEI_USB2_HC_DEV;

#define EFI_LIST_ENTRY LIST_ENTRY

#include "UsbHcMem.h"
#include "EhciReg.h"
#include "EhciUrb.h"
#include "EhciSched.h"

#define EFI_USB_SPEED_FULL 0x0000
#define EFI_USB_SPEED_LOW  0x0001
#define EFI_USB_SPEED_HIGH 0x0002

#define PAGESIZE           4096

#define EHC_1_MICROSECOND            1
#define EHC_1_MILLISECOND            (1000 * EHC_1_MICROSECOND)
#define EHC_1_SECOND                 (1000 * EHC_1_MILLISECOND)

//
// EHCI register operation timeout, set by experience
//
#define EHC_RESET_TIMEOUT            (1 * EHC_1_SECOND)
#define EHC_GENERIC_TIMEOUT          (10 * EHC_1_MILLISECOND)


//
// Wait for roothub port power stable, refers to Spec[EHCI1.0-2.3.9]
//
#define EHC_ROOT_PORT_RECOVERY_STALL (20 * EHC_1_MILLISECOND)

//
// Sync and Async transfer polling interval, set by experience, 
// and the unit of Async is 100us, means 50ms as interval.
//
#define EHC_SYNC_POLL_INTERVAL       (6 * EHC_1_MILLISECOND)

#define EHC_ASYNC_POLL_INTERVAL      (50 * 10000U)

//
//Iterate through the doule linked list. NOT delete safe
//
#define EFI_LIST_FOR_EACH(Entry, ListHead)    \
  for(Entry = (ListHead)->ForwardLink; Entry != (ListHead); Entry = Entry->ForwardLink)

//
//Iterate through the doule linked list. This is delete-safe.
//Don't touch NextEntry
//
#define EFI_LIST_FOR_EACH_SAFE(Entry, NextEntry, ListHead)            \
  for(Entry = (ListHead)->ForwardLink, NextEntry = Entry->ForwardLink;\
      Entry != (ListHead); Entry = NextEntry, NextEntry = Entry->ForwardLink)

#define EFI_LIST_CONTAINER(Entry, Type, Field) BASE_CR(Entry, Type, Field)


#define EHC_LOW_32BIT(Addr64)     ((UINT32)(((UINTN)(Addr64)) & 0XFFFFFFFF))
#define EHC_HIGH_32BIT(Addr64)    ((UINT32)(RShiftU64((UINTN)(Addr64), 32) & 0XFFFFFFFF))
#define EHC_BIT_IS_SET(Data, Bit) ((BOOLEAN)(((Data) & (Bit)) == (Bit)))

#define EHC_REG_BIT_IS_SET(Ehc, Offset, Bit) \
          (EHC_BIT_IS_SET(EhcReadOpReg ((Ehc), (Offset)), (Bit)))

#define USB2_HC_DEV_SIGNATURE  SIGNATURE_32 ('e', 'h', 'c', 'i')

struct _PEI_USB2_HC_DEV {
  UINTN                               Signature;
  PEI_USB2_HOST_CONTROLLER_PPI        Usb2HostControllerPpi;
  EFI_PEI_PPI_DESCRIPTOR              PpiDescriptor;                    
  UINT32                              UsbHostControllerBaseAddress;
  PEI_URB                             *Urb;
  USBHC_MEM_POOL                      *MemPool;

  //
  // Schedule data shared between asynchronous and periodic
  // transfers:
  // ShortReadStop, as its name indicates, is used to terminate
  // the short read except the control transfer. EHCI follows
  // the alternative next QTD point when a short read happens.
  // For control transfer, even the short read happens, try the
  // status stage.
  //
  PEI_EHC_QTD                         *ShortReadStop;
  EFI_EVENT                           PollTimer;
  
  //
  // Asynchronous(bulk and control) transfer schedule data: 
  // ReclaimHead is used as the head of the asynchronous transfer
  // list. It acts as the reclamation header. 
  //
  PEI_EHC_QH                          *ReclaimHead;
  
  //
  // Peroidic (interrupt) transfer schedule data:
  //
  VOID                                *PeriodFrame;     // Mapped as common buffer 
  VOID                                *PeriodFrameHost;
  VOID                                *PeriodFrameMap;
                                      
  PEI_EHC_QH                          *PeriodOne;
  EFI_LIST_ENTRY                      AsyncIntTransfers;

  //
  // EHCI configuration data
  //
  UINT32                              HcStructParams; // Cache of HC structure parameter, EHC_HCSPARAMS_OFFSET
  UINT32                              HcCapParams;    // Cache of HC capability parameter, HCCPARAMS
  UINT32                              CapLen;         // Capability length
  UINT32                              High32bitAddr;
};

#define PEI_RECOVERY_USB_EHC_DEV_FROM_EHCI_THIS(a)  CR (a, PEI_USB2_HC_DEV, Usb2HostControllerPpi, USB2_HC_DEV_SIGNATURE)

/**
  @param  EhcDev                 EHCI Device.

  @retval EFI_SUCCESS            EHCI successfully initialized.
  @retval EFI_ABORTED            EHCI was failed to be initialized.

**/
EFI_STATUS
InitializeUsbHC (
  IN PEI_USB2_HC_DEV      *EhcDev  
  );

/**
  Initialize the memory management pool for the host controller.
  
  @param  Ehc                   The EHCI device.
  @param  Check4G               Whether the host controller requires allocated memory 
                                from one 4G address space.
  @param  Which4G               The 4G memory area each memory allocated should be from.

  @retval EFI_SUCCESS           The memory pool is initialized.
  @retval EFI_OUT_OF_RESOURCE   Fail to init the memory pool.

**/
USBHC_MEM_POOL *
UsbHcInitMemPool (
  IN PEI_USB2_HC_DEV      *Ehc,
  IN BOOLEAN              Check4G,
  IN UINT32               Which4G
  )
;
            
/**
  Release the memory management pool.
  
  @param  Pool                  The USB memory pool to free.

  @retval EFI_DEVICE_ERROR      Fail to free the memory pool.
  @retval EFI_SUCCESS           The memory pool is freed.

**/
EFI_STATUS
UsbHcFreeMemPool (
  IN USBHC_MEM_POOL       *Pool
  )
;

/**
  Allocate some memory from the host controller's memory pool
  which can be used to communicate with host controller.
  
  @param  Ehc       The EHCI device.
  @param  Pool      The host controller's memory pool.
  @param  Size      Size of the memory to allocate.

  @return The allocated memory or NULL.

**/
VOID *
UsbHcAllocateMem (
  IN PEI_USB2_HC_DEV      *Ehc,
  IN  USBHC_MEM_POOL      *Pool,
  IN  UINTN               Size
  )
;

/**
  Free the allocated memory back to the memory pool.

  @param  Pool           The memory pool of the host controller.
  @param  Mem            The memory to free.
  @param  Size           The size of the memory to free.

**/
VOID
UsbHcFreeMem (
  IN USBHC_MEM_POOL       *Pool,
  IN VOID                 *Mem,
  IN UINTN                Size
  )
;

#endif