audk/SourceLevelDebugPkg/Library/PeCoffExtraActionLibDebug/PeCoffExtraActionLib.h

74 lines
1.9 KiB
C
Raw Normal View History

This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
/** @file
PE/Coff Extra Action library instances, it will report image debug info.
Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
**/
#ifndef _PE_COFF_EXTRA_ACTION_LIB_H_
#define _PE_COFF_EXTRA_ACTION_LIB_H_
#include <Base.h>
#include <Library/PeCoffExtraActionLib.h>
#include <Library/DebugLib.h>
#include <Library/BaseLib.h>
#include <Library/IoLib.h>
#include <Library/PcdLib.h>
#include <Library/BaseMemoryLib.h>
#include <ImageDebugSupport.h>
#define DEBUG_LOAD_IMAGE_METHOD_IO_HW_BREAKPOINT 1
#define DEBUG_LOAD_IMAGE_METHOD_SOFT_INT3 2
#define IO_HW_BREAKPOINT_VECTOR_NUM 1
#define SOFT_INT_VECTOR_NUM 3
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
extern UINTN AsmInterruptHandle;
/**
Read IDT entry to check if IDT entries are setup by Debug Agent.
@param[in] IdtDescriptor Pointer to IDT Descriptor.
@param[in] InterruptType Interrupt type.
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
@retval TRUE IDT entries were setup by Debug Agent.
@retval FALSE IDT entries were not setuo by Debug Agent.
**/
BOOLEAN
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
CheckDebugAgentHandler (
IN IA32_DESCRIPTOR *IdtDescriptor,
IN UINTN InterruptType
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
);
/**
Save IDT entry for INT1 and update it.
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
@param[in] IdtDescriptor Pointer to IDT Descriptor.
@param[out] SavedIdtEntry Original IDT entry returned.
**/
VOID
SaveAndUpdateIdtEntry1 (
IN IA32_DESCRIPTOR *IdtDescriptor,
OUT IA32_IDT_GATE_DESCRIPTOR *SavedIdtEntry
);
/**
Restore IDT entry for INT1.
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
@param[in] IdtDescriptor Pointer to IDT Descriptor.
@param[in] RestoredIdtEntry IDT entry to be restored.
**/
VOID
RestoreIdtEntry1 (
IN IA32_DESCRIPTOR *IdtDescriptor,
IN IA32_IDT_GATE_DESCRIPTOR *RestoredIdtEntry
);
#endif