mirror of https://github.com/acidanthera/audk.git
264 lines
13 KiB
C
264 lines
13 KiB
C
|
/** @file
|
||
|
|
Defines the USB Host Controller PPI that provides I/O services for a USB Host
|
||
|
|
Controller that may be used to access recovery devices. These interfaces are
|
||
|
|
modeled on the UEFI 2.3 specification EFI_USB2_HOST_CONTROLLER_PROTOCOL.
|
||
|
|
Refer to section 16.1 of the UEFI 2.3 Specification for more information on
|
||
|
|
these interfaces.
|
||
|
|
|
||
|
|
Copyright (c) 2010, Intel Corporation. All rights reserved. <BR>
|
||
|
|
|
||
|
|
This program and the accompanying materials
|
||
|
|
are licensed and made available under the terms and conditions
|
||
|
|
of the BSD License which accompanies this distribution. The
|
||
|
|
full text of the license may be found at
|
||
|
|
http://opensource.org/licenses/bsd-license.php
|
||
|
|
|
||
|
|
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
||
|
|
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
||
|
|
|
||
|
|
**/
|
||
|
|
|
||
|
|
#ifndef _PEI_USB2_HOST_CONTROLLER_PPI_H_
|
||
|
|
#define _PEI_USB2_HOST_CONTROLLER_PPI_H_
|
||
|
|
|
||
|
|
#include <Protocol/Usb2HostController.h>
|
||
|
|
|
||
|
|
///
|
||
|
|
/// Global ID for the PEI_USB2_HOST_CONTROLLER_PPI.
|
||
|
|
///
|
||
|
|
#define PEI_USB2_HOST_CONTROLLER_PPI_GUID \
|
||
|
|
{ \
|
||
|
|
0xa7d09fe1, 0x74d4, 0x4ba5, { 0x84, 0x7c, 0x12, 0xed, 0x5b, 0x19, 0xad, 0xe4 } \
|
||
|
|
}
|
||
|
|
|
||
|
|
///
|
||
|
|
/// Forward declaration for the PEI_USB2_HOST_CONTROLLER_PPI.
|
||
|
|
///
|
||
|
|
typedef struct _PEI_USB2_HOST_CONTROLLER_PPI PEI_USB2_HOST_CONTROLLER_PPI;
|
||
|
|
|
||
|
|
/**
|
||
|
|
Initiate a USB control transfer using a specific USB Host controller on the USB bus.
|
||
|
|
|
||
|
|
@param[in] PeiServices The pointer to the PEI Services Table.
|
||
|
|
@param[in] This The pointer to this instance of the
|
||
|
|
PEI_USB2_HOST_CONTROLLER_PPI.
|
||
|
|
@param[in] DeviceAddress Represents the address of the target device
|
||
|
|
on the USB.
|
||
|
|
@param[in] DeviceSpeed Indicates device speed.
|
||
|
|
@param[in] MaximumPacketLength Indicates the maximum packet size that the
|
||
|
|
default control transfer
|
||
|
|
endpoint is capable of sending or receiving.
|
||
|
|
@param[in] Request A pointer to the USB device request that
|
||
|
|
will be sent to the USB device.
|
||
|
|
@param[in] TransferDirection Specifies the data direction for the transfer.
|
||
|
|
There are three values available:
|
||
|
|
EfiUsbDataIn, EfiUsbDataOut and EfiUsbNoData.
|
||
|
|
@param[in,out] Data A pointer to the buffer of data that will
|
||
|
|
be transmitted to USB device or
|
||
|
|
received from USB device.
|
||
|
|
@param[in,out] DataLength On input, indicates the size, in bytes, of
|
||
|
|
the data buffer specified by Data.
|
||
|
|
On output, indicates the amount of data
|
||
|
|
actually transferred.
|
||
|
|
@param[in] TimeOut Indicates the maximum time, in milliseconds,
|
||
|
|
that the transfer is allowed to complete.
|
||
|
|
@param[in] Translator A pointer to the transaction translator data.
|
||
|
|
@param[out] TransferResult A pointer to the detailed result information
|
||
|
|
generated by this control transfer.
|
||
|
|
|
||
|
|
@retval EFI_SUCCESS The control transfer was completed successfully.
|
||
|
|
@retval EFI_DEVICE_ERROR The control transfer failed due to host controller
|
||
|
|
or device error.
|
||
|
|
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
|
||
|
|
@retval EFI_OUT_OF_RESOURCES The control transfer could not be completed due to a lack of resources.
|
||
|
|
@retval EFI_TIMEOUT The control transfer failed due to timeout.
|
||
|
|
|
||
|
|
|
||
|
|
**/
|
||
|
|
typedef
|
||
|
|
EFI_STATUS
|
||
|
|
(EFIAPI *PEI_USB2_HOST_CONTROLLER_CONTROL_TRANSFER)(
|
||
|
|
IN EFI_PEI_SERVICES **PeiServices,
|
||
|
|
IN PEI_USB2_HOST_CONTROLLER_PPI *This,
|
||
|
|
IN UINT8 DeviceAddress,
|
||
|
|
IN UINT8 DeviceSpeed,
|
||
|
|
IN UINTN MaximumPacketLength,
|
||
|
|
IN USB_DEVICE_REQUEST *Request,
|
||
|
|
IN EFI_USB_DATA_DIRECTION TransferDirection,
|
||
|
|
IN OUT VOID *Data OPTIONAL,
|
||
|
|
IN OUT UINTN *DataLength OPTIONAL,
|
||
|
|
IN UINTN TimeOut,
|
||
|
|
IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
|
||
|
|
OUT UINT32 *TransferResult
|
||
|
|
);
|
||
|
|
|
||
|
|
/**
|
||
|
|
Initiate a USB bulk transfer using a specific USB Host controller on the USB bus.
|
||
|
|
|
||
|
|
@param[in] PeiServices The pointer to the PEI Services Table.
|
||
|
|
@param[in] This The pointer to this instance of the
|
||
|
|
PEI_USB2_HOST_CONTROLLER_PPI.
|
||
|
|
@param[in] DeviceAddress Represents the address of the target device
|
||
|
|
on the USB.
|
||
|
|
@param[in] EndPointAddress The combination of an endpoint number and
|
||
|
|
an endpoint direction of the target USB device.
|
||
|
|
@param[in] DeviceSpeed Indicates device speed.
|
||
|
|
@param[in] MaximumPacketLength Indicates the maximum packet size the target
|
||
|
|
endpoint is capable of sending or receiving.
|
||
|
|
@param[in,out] Data Array of pointers to the buffers of data
|
||
|
|
that will be transmitted to USB device or
|
||
|
|
received from USB device.
|
||
|
|
@param[in,out] DataLength When input, indicates the size, in bytes, of
|
||
|
|
the data buffers specified by Data. When output,
|
||
|
|
indicates the data size actually transferred.
|
||
|
|
@param[in,out] DataToggle A pointer to the data toggle value.
|
||
|
|
@param[in] TimeOut Indicates the maximum time, in milliseconds,
|
||
|
|
in which the transfer is allowed to complete.
|
||
|
|
@param[in] Translator A pointer to the transaction translator data.
|
||
|
|
@param[out] TransferResult A pointer to the detailed result information
|
||
|
|
of the bulk transfer.
|
||
|
|
|
||
|
|
@retval EFI_SUCCESS The bulk transfer was completed successfully.
|
||
|
|
@retval EFI_DEVICE_ERROR The bulk transfer failed due to host controller or device error.
|
||
|
|
Caller should check TransferResult for detailed error information.
|
||
|
|
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
|
||
|
|
@retval EFI_OUT_OF_RESOURCES The bulk transfer could not be submitted due to a lack of resources.
|
||
|
|
@retval EFI_TIMEOUT The bulk transfer failed due to timeout.
|
||
|
|
|
||
|
|
|
||
|
|
**/
|
||
|
|
typedef
|
||
|
|
EFI_STATUS
|
||
|
|
(EFIAPI *PEI_USB2_HOST_CONTROLLER_BULK_TRANSFER)(
|
||
|
|
IN EFI_PEI_SERVICES **PeiServices,
|
||
|
|
IN PEI_USB2_HOST_CONTROLLER_PPI *This,
|
||
|
|
IN UINT8 DeviceAddress,
|
||
|
|
IN UINT8 EndPointAddress,
|
||
|
|
IN UINT8 DeviceSpeed,
|
||
|
|
IN UINTN MaximumPacketLength,
|
||
|
|
IN OUT VOID *Data[EFI_USB_MAX_BULK_BUFFER_NUM],
|
||
|
|
IN OUT UINTN *DataLength,
|
||
|
|
IN OUT UINT8 *DataToggle,
|
||
|
|
IN UINTN TimeOut,
|
||
|
|
IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
|
||
|
|
OUT UINT32 *TransferResult
|
||
|
|
);
|
||
|
|
|
||
|
|
/**
|
||
|
|
Retrieves the number of root hub ports.
|
||
|
|
|
||
|
|
@param[in] PeiServices The pointer to the PEI Services Table.
|
||
|
|
@param[in] This The pointer to this instance of the
|
||
|
|
PEI_USB2_HOST_CONTROLLER_PPI.
|
||
|
|
@param[out] PortNumber The pointer to the number of the root hub ports.
|
||
|
|
|
||
|
|
@retval EFI_SUCCESS The port number was retrieved successfully.
|
||
|
|
@retval EFI_INVALID_PARAMETER PortNumber is NULL.
|
||
|
|
|
||
|
|
**/
|
||
|
|
typedef
|
||
|
|
EFI_STATUS
|
||
|
|
(EFIAPI *PEI_USB2_HOST_CONTROLLER_GET_ROOTHUB_PORT_NUMBER)(
|
||
|
|
IN EFI_PEI_SERVICES **PeiServices,
|
||
|
|
IN PEI_USB2_HOST_CONTROLLER_PPI *This,
|
||
|
|
OUT UINT8 *PortNumber
|
||
|
|
);
|
||
|
|
|
||
|
|
/**
|
||
|
|
Retrieves the current status of a USB root hub port.
|
||
|
|
|
||
|
|
@param[in] PeiServices The pointer to the PEI Services Table.
|
||
|
|
@param[in] This The pointer to this instance of the
|
||
|
|
PEI_USB2_HOST_CONTROLLER_PPI.
|
||
|
|
@param[in] PortNumber Specifies the root hub port from which the status is
|
||
|
|
to be retrieved.
|
||
|
|
This value is zero based.
|
||
|
|
@param[out] PortStatus A pointer to the current port status bits and port
|
||
|
|
status change bits.
|
||
|
|
|
||
|
|
@retval EFI_SUCCESS The status of the USB root hub port specified by
|
||
|
|
PortNumber was returned in PortStatus.
|
||
|
|
@retval EFI_INVALID_PARAMETER PortNumber is invalid.
|
||
|
|
|
||
|
|
**/
|
||
|
|
typedef
|
||
|
|
EFI_STATUS
|
||
|
|
(EFIAPI *PEI_USB2_HOST_CONTROLLER_GET_ROOTHUB_PORT_STATUS)(
|
||
|
|
IN EFI_PEI_SERVICES **PeiServices,
|
||
|
|
IN PEI_USB2_HOST_CONTROLLER_PPI *This,
|
||
|
|
IN UINT8 PortNumber,
|
||
|
|
OUT EFI_USB_PORT_STATUS *PortStatus
|
||
|
|
);
|
||
|
|
|
||
|
|
/**
|
||
|
|
Sets a feature for the specified root hub port.
|
||
|
|
|
||
|
|
@param[in] PeiServices The pointer to the PEI Services Table.
|
||
|
|
@param[in] This The pointer to this instance of the
|
||
|
|
PEI_USB2_HOST_CONTROLLER_PPI.
|
||
|
|
@param[in] PortNumber Specifies the root hub port whose feature is requested
|
||
|
|
to be set. This value is zero based.
|
||
|
|
@param[in] PortFeature Indicates the feature selector associated with the feature
|
||
|
|
set request.
|
||
|
|
|
||
|
|
@retval EFI_SUCCESS The feature specified by PortFeature was set for
|
||
|
|
the USB root hub port specified by PortNumber.
|
||
|
|
@retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid
|
||
|
|
for this function.
|
||
|
|
@retval EFI_TIMEOUT The time out occurred
|
||
|
|
|
||
|
|
**/
|
||
|
|
typedef
|
||
|
|
EFI_STATUS
|
||
|
|
(EFIAPI *PEI_USB2_HOST_CONTROLLER_SET_ROOTHUB_PORT_FEATURE)(
|
||
|
|
IN EFI_PEI_SERVICES **PeiServices,
|
||
|
|
IN PEI_USB2_HOST_CONTROLLER_PPI *This,
|
||
|
|
IN UINT8 PortNumber,
|
||
|
|
IN EFI_USB_PORT_FEATURE PortFeature
|
||
|
|
);
|
||
|
|
|
||
|
|
/**
|
||
|
|
Clears a feature for the specified root hub port.
|
||
|
|
|
||
|
|
@param[in] PeiServices The pointer to the PEI Services Table.
|
||
|
|
@param[in] This The pointer to this instance of the
|
||
|
|
PEI_USB2_HOST_CONTROLLER_PPI.
|
||
|
|
@param[in] PortNumber Specifies the root hub port whose feature is
|
||
|
|
requested to be cleared.
|
||
|
|
@param[in] PortFeature Indicates the feature selector associated with the
|
||
|
|
feature clear request.
|
||
|
|
|
||
|
|
@return EFI_SUCCESS The feature specified by PortFeature was cleared
|
||
|
|
for the USB root hub port specified by PortNumber.
|
||
|
|
@return EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
|
||
|
|
|
||
|
|
**/
|
||
|
|
typedef
|
||
|
|
EFI_STATUS
|
||
|
|
(EFIAPI *PEI_USB2_HOST_CONTROLLER_CLEAR_ROOTHUB_PORT_FEATURE)(
|
||
|
|
IN EFI_PEI_SERVICES **PeiServices,
|
||
|
|
IN PEI_USB2_HOST_CONTROLLER_PPI *This,
|
||
|
|
IN UINT8 PortNumber,
|
||
|
|
IN EFI_USB_PORT_FEATURE PortFeature
|
||
|
|
);
|
||
|
|
|
||
|
|
///
|
||
|
|
/// This PPI contains a set of services to interact with the USB host controller.
|
||
|
|
/// These interfaces are modeled on the UEFI 2.3 specification protocol
|
||
|
|
/// EFI_USB2_HOST_CONTROLLER_PROTOCOL. Refer to section 16.1 of the UEFI 2.3
|
||
|
|
/// Specification for more information on these interfaces.
|
||
|
|
///
|
||
|
|
struct _PEI_USB2_HOST_CONTROLLER_PPI {
|
||
|
|
PEI_USB2_HOST_CONTROLLER_CONTROL_TRANSFER ControlTransfer;
|
||
|
|
PEI_USB2_HOST_CONTROLLER_BULK_TRANSFER BulkTransfer;
|
||
|
|
PEI_USB2_HOST_CONTROLLER_GET_ROOTHUB_PORT_NUMBER GetRootHubPortNumber;
|
||
|
|
PEI_USB2_HOST_CONTROLLER_GET_ROOTHUB_PORT_STATUS GetRootHubPortStatus;
|
||
|
|
PEI_USB2_HOST_CONTROLLER_SET_ROOTHUB_PORT_FEATURE SetRootHubPortFeature;
|
||
|
|
PEI_USB2_HOST_CONTROLLER_CLEAR_ROOTHUB_PORT_FEATURE ClearRootHubPortFeature;
|
||
|
|
};
|
||
|
|
|
||
|
|
extern EFI_GUID gPeiUsb2HostControllerPpiGuid;
|
||
|
|
|
||
|
|
#endif
|
||
|
|
|