audk/OvmfPkg/OvmfPkgIa32.fdf

494 lines
17 KiB
Plaintext
Raw Normal View History

## @file
# Open Virtual Machine Firmware: FDF
#
# Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
##
################################################################################
#
# Default flash size for DEBUG build is 2MB. For RELEASE it is 1MB.
#
# Defining FD_SIZE_1MB or FD_SIZE_2MB on the build command line can
# override this.
#
[Defines]
!if $(TARGET) == RELEASE
!ifndef $(FD_SIZE_2MB)
DEFINE FD_SIZE_1MB=
!endif
!endif
!ifdef $(FD_SIZE_1MB)
[FD.OVMF]
BaseAddress = 0xFFF00000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFdBaseAddress
Size = 0x00100000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareFdSize
ErasePolarity = 1
BlockSize = 0x1000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareBlockSize
NumBlocks = 0x100
!else
[FD.OVMF]
BaseAddress = 0xFFE00000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFdBaseAddress
Size = 0x00200000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareFdSize
ErasePolarity = 1
BlockSize = 0x1000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareBlockSize
NumBlocks = 0x200
!endif
0x00000000|0x0000e000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
#NV_VARIABLE_STORE
DATA = {
## This is the EFI_FIRMWARE_VOLUME_HEADER
# ZeroVector []
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
# FileSystemGuid: gEfiSystemNvDataFvGuid =
# { 0xFFF12B8D, 0x7696, 0x4C8B,
# { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
# FvLength: 0x20000
0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
# Signature "_FVH" # Attributes
0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,
# HeaderLength # CheckSum # ExtHeaderOffset #Reserved #Revision
0x48, 0x00, 0x19, 0xF9, 0x00, 0x00, 0x00, 0x02,
# Blockmap[0]: 0x20 Blocks * 0x1000 Bytes / Block
0x20, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
# Blockmap[1]: End
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
## This is the VARIABLE_STORE_HEADER
!if $(SECURE_BOOT_ENABLE) == TRUE
# Signature: gEfiAuthenticatedVariableGuid =
# { 0xaaf32c78, 0x947b, 0x439a,
# { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 }}
0x78, 0x2c, 0xf3, 0xaa, 0x7b, 0x94, 0x9a, 0x43,
0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92,
!else
# Signature: gEfiVariableGuid =
# { 0xddcf3616, 0x3275, 0x4164,
# { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41,
0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d,
!endif
# Size: 0xe000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) -
# 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0xdfb8
# This can speed up the Variable Dispatch a bit.
0xB8, 0xDF, 0x00, 0x00,
# FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}
0x0000e000|0x00001000
#NV_EVENT_LOG
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageEventLogBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageEventLogSize
0x0000f000|0x00001000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
#NV_FTW_WORKING
DATA = {
# EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid =
# { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
0x2b, 0x29, 0x58, 0x9e, 0x68, 0x7c, 0x7d, 0x49,
0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95,
# Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved
0x2c, 0xaf, 0x2c, 0x64, 0xFE, 0xFF, 0xFF, 0xFF,
# WriteQueueSize: UINT64
0xE0, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}
0x00010000|0x00010000
#NV_FTW_SPARE
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
!ifdef $(FD_SIZE_1MB)
0x00020000|0x000CC000
FV = FVMAIN_COMPACT
0x000EC000|0x14000
FV = SECFV
!else
0x00020000|0x001AC000
FV = FVMAIN_COMPACT
0x001CC000|0x34000
FV = SECFV
!endif
################################################################################
[FD.MEMFD]
BaseAddress = 0x800000
Size = 0x800000
ErasePolarity = 1
BlockSize = 0x10000
NumBlocks = 0x80
0x000000|0x006000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesSize
0x010000|0x008000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamSize
OvmfPkg: Split MAINFV into a separate PEI and DXE FVs By splitting the PEI and DXE phases into separate FVs, we can only reserve the PEI FV for ACPI S3 support. This should save about 7MB. Unfortunately, this all has to happen in a single commit. DEC: * Remove PcdOvmfMemFv(Base|Size) * Add PcdOvmfPeiMemFv(Base|Size) * Add PcdOvmfDxeMemFv(Base|Size) FDF: * Add new PEIFV. Move PEI modules here. * Remove MAINFV * Add PEIFV and DXEFV into FVMAIN_COMPACT - They are added as 2 sections of a file, and compressed together so they should retain good compression * PcdOvmf(Pei|Dxe)MemFv(Base|Size) are set SEC: * Find both the PEI and DXE FVs after decompression. - Copy them separately to their memory locations. Platform PEI driver: * Fv.c: Publish both FVs as appropriate * MemDetect.c: PcdOvmfMemFv(Base|Size) => PcdOvmfDxeMemFv(Base|Size) OVMF.fd before: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed MAINFV uncompressed individual PEI modules uncompressed FV FFS file compressed with PI_NONE DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed OVMF.fd after: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed PEIFV uncompressed individual PEI modules uncompressed DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15151 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:39:13 +01:00
0x020000|0x0E0000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvSize
FV = PEIFV
0x100000|0x700000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvSize
FV = DXEFV
################################################################################
[FV.SECFV]
BlockSize = 0x1000
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
#
# SEC Phase modules
#
# The code in this FV handles the initial firmware startup, and
OvmfPkg: Split MAINFV into a separate PEI and DXE FVs By splitting the PEI and DXE phases into separate FVs, we can only reserve the PEI FV for ACPI S3 support. This should save about 7MB. Unfortunately, this all has to happen in a single commit. DEC: * Remove PcdOvmfMemFv(Base|Size) * Add PcdOvmfPeiMemFv(Base|Size) * Add PcdOvmfDxeMemFv(Base|Size) FDF: * Add new PEIFV. Move PEI modules here. * Remove MAINFV * Add PEIFV and DXEFV into FVMAIN_COMPACT - They are added as 2 sections of a file, and compressed together so they should retain good compression * PcdOvmf(Pei|Dxe)MemFv(Base|Size) are set SEC: * Find both the PEI and DXE FVs after decompression. - Copy them separately to their memory locations. Platform PEI driver: * Fv.c: Publish both FVs as appropriate * MemDetect.c: PcdOvmfMemFv(Base|Size) => PcdOvmfDxeMemFv(Base|Size) OVMF.fd before: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed MAINFV uncompressed individual PEI modules uncompressed FV FFS file compressed with PI_NONE DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed OVMF.fd after: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed PEIFV uncompressed individual PEI modules uncompressed DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15151 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:39:13 +01:00
# decompresses the PEI and DXE FVs which handles the rest of the boot sequence.
#
INF OvmfPkg/Sec/SecMain.inf
INF RuleOverride=RESET_VECTOR UefiCpuPkg/ResetVector/Vtf0/Bin/ResetVector.inf
################################################################################
OvmfPkg: Split MAINFV into a separate PEI and DXE FVs By splitting the PEI and DXE phases into separate FVs, we can only reserve the PEI FV for ACPI S3 support. This should save about 7MB. Unfortunately, this all has to happen in a single commit. DEC: * Remove PcdOvmfMemFv(Base|Size) * Add PcdOvmfPeiMemFv(Base|Size) * Add PcdOvmfDxeMemFv(Base|Size) FDF: * Add new PEIFV. Move PEI modules here. * Remove MAINFV * Add PEIFV and DXEFV into FVMAIN_COMPACT - They are added as 2 sections of a file, and compressed together so they should retain good compression * PcdOvmf(Pei|Dxe)MemFv(Base|Size) are set SEC: * Find both the PEI and DXE FVs after decompression. - Copy them separately to their memory locations. Platform PEI driver: * Fv.c: Publish both FVs as appropriate * MemDetect.c: PcdOvmfMemFv(Base|Size) => PcdOvmfDxeMemFv(Base|Size) OVMF.fd before: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed MAINFV uncompressed individual PEI modules uncompressed FV FFS file compressed with PI_NONE DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed OVMF.fd after: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed PEIFV uncompressed individual PEI modules uncompressed DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15151 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:39:13 +01:00
[FV.PEIFV]
BlockSize = 0x10000
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
APRIORI PEI {
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
}
#
# PEI Phase modules
#
INF MdeModulePkg/Core/Pei/PeiMain.inf
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
INF OvmfPkg/PlatformPei/PlatformPei.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
################################################################################
[FV.DXEFV]
BlockSize = 0x10000
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
APRIORI DXE {
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
}
#
# DXE Phase modules
#
INF MdeModulePkg/Core/Dxe/DxeMain.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
INF PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf
INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
INF UefiCpuPkg/CpuDxe/CpuDxe.inf
INF PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
INF PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF PcAtChipsetPkg/KbcResetDxe/Reset.inf
INF MdeModulePkg/Universal/Metronome/Metronome.inf
INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
INF OvmfPkg/BlockMmioToBlockIoDxe/BlockIo.inf
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
INF OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf
INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
INF OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
INF OvmfPkg/EmuVariableFvbRuntimeDxe/Fvb.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
!if $(SECURE_BOOT_ENABLE) == TRUE
INF SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableRuntimeDxe.inf
INF OvmfPkg/SecureBootConfigDxe/SecureBootConfigDxe.inf
!else
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
!endif
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF MdeModulePkg/Universal/PrintDxe/PrintDxe.inf
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
INF IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
INF PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf
INF PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
INF IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
!ifndef $(SOURCE_DEBUG_ENABLE)
INF IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
!endif
INF IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf
INF IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf
INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
INF OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf
INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
INF OvmfPkg/AcpiPlatformDxe/AcpiPlatformDxe.inf
INF RuleOverride=ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf
INF RuleOverride = BINARY FatBinPkg/EnhancedFatDxe/Fat.inf
!ifndef $(USE_OLD_SHELL)
INF ShellPkg/Application/Shell/Shell.inf
!else
INF RuleOverride = BINARY EdkShellBinPkg/FullShell/FullShell.inf
!endif
FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {
SECTION RAW = MdeModulePkg/Logo/Logo.bmp
}
#
# Network modules
#
!if $(E1000_ENABLE)
FILE DRIVER = 5D695E11-9B3F-4b83-B25F-4A8D5D69BE07 {
SECTION PE32 = Intel3.5/EFI32/E3507E2.EFI
}
!endif
INF MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf
INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf
INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
INF OvmfPkg/VirtioNetDxe/VirtioNet.inf
#
# Usb Support
#
INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
!ifdef $(CSM_ENABLE)
INF IntelFrameworkModulePkg/Csm/BiosThunk/VideoDxe/VideoDxe.inf
INF IntelFrameworkModulePkg/Csm/LegacyBiosDxe/LegacyBiosDxe.inf
INF RuleOverride=CSM OvmfPkg/Csm/Csm16/Csm16.inf
!endif
INF OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf
################################################################################
[FV.FVMAIN_COMPACT]
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
OvmfPkg: Split MAINFV into a separate PEI and DXE FVs By splitting the PEI and DXE phases into separate FVs, we can only reserve the PEI FV for ACPI S3 support. This should save about 7MB. Unfortunately, this all has to happen in a single commit. DEC: * Remove PcdOvmfMemFv(Base|Size) * Add PcdOvmfPeiMemFv(Base|Size) * Add PcdOvmfDxeMemFv(Base|Size) FDF: * Add new PEIFV. Move PEI modules here. * Remove MAINFV * Add PEIFV and DXEFV into FVMAIN_COMPACT - They are added as 2 sections of a file, and compressed together so they should retain good compression * PcdOvmf(Pei|Dxe)MemFv(Base|Size) are set SEC: * Find both the PEI and DXE FVs after decompression. - Copy them separately to their memory locations. Platform PEI driver: * Fv.c: Publish both FVs as appropriate * MemDetect.c: PcdOvmfMemFv(Base|Size) => PcdOvmfDxeMemFv(Base|Size) OVMF.fd before: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed MAINFV uncompressed individual PEI modules uncompressed FV FFS file compressed with PI_NONE DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed OVMF.fd after: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed PEIFV uncompressed individual PEI modules uncompressed DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15151 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:39:13 +01:00
#
# These firmware volumes will have files placed in them uncompressed,
# and then both firmware volumes will be compressed in a single
# compression operation in order to achieve better overall compression.
#
SECTION FV_IMAGE = PEIFV
SECTION FV_IMAGE = DXEFV
}
}
################################################################################
[Rule.Common.SEC]
FILE SEC = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
PE32 PE32 Align=32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 Align=32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_DRIVER.BINARY]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION.BINARY]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.USER_DEFINED.ACPITABLE]
FILE FREEFORM = $(NAMED_GUID) {
RAW ACPI |.acpi
RAW ASL |.aml
}
[Rule.Common.USER_DEFINED.CSM]
FILE FREEFORM = $(NAMED_GUID) {
RAW BIN |.bin
}
[Rule.Common.SEC.RESET_VECTOR]
FILE RAW = $(NAMED_GUID) {
RAW RAW |.raw
}