audk/MdeModulePkg/Include/UniversalPayload/PciRootBridges.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

92 lines
5.4 KiB
C
Raw Normal View History

/** @file
This file defines the structure for the PCI Root Bridges.
Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@par Revision Reference:
- Universal Payload Specification 0.75 (https://universalpayload.github.io/documentation/)
**/
#ifndef UNIVERSAL_PAYLOAD_PCI_ROOT_BRIDGES_H_
#define UNIVERSAL_PAYLOAD_PCI_ROOT_BRIDGES_H_
#include <UniversalPayload/UniversalPayload.h>
#pragma pack(1)
//
// (Base > Limit) indicates an aperture is not available.
//
typedef struct {
//
// Base and Limit are the device address instead of host address when
// Translation is not zero
//
UINT64 Base;
UINT64 Limit;
//
// According to UEFI 2.7, Device Address = Host Address + Translation,
// so Translation = Device Address - Host Address.
// On platforms where Translation is not zero, the subtraction is probably to
// be performed with UINT64 wrap-around semantics, for we may translate an
// above-4G host address into a below-4G device address for legacy PCIe device
// compatibility.
//
// NOTE: The alignment of Translation is required to be larger than any BAR
// alignment in the same root bridge, so that the same alignment can be
// applied to both device address and host address, which simplifies the
// situation and makes the current resource allocation code in generic PCI
// host bridge driver still work.
//
UINT64 Translation;
} UNIVERSAL_PAYLOAD_PCI_ROOT_BRIDGE_APERTURE;
///
/// Payload PCI Root Bridge Information HOB
///
typedef struct {
UINT32 Segment; ///< Segment number.
UINT64 Supports; ///< Supported attributes.
///< Refer to EFI_PCI_ATTRIBUTE_xxx used by GetAttributes()
///< and SetAttributes() in EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
UINT64 Attributes; ///< Initial attributes.
///< Refer to EFI_PCI_ATTRIBUTE_xxx used by GetAttributes()
///< and SetAttributes() in EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
BOOLEAN DmaAbove4G; ///< DMA above 4GB memory.
///< Set to TRUE when root bridge supports DMA above 4GB memory.
BOOLEAN NoExtendedConfigSpace; ///< When FALSE, the root bridge supports
///< Extended (4096-byte) Configuration Space.
///< When TRUE, the root bridge supports
///< 256-byte Configuration Space only.
UINT64 AllocationAttributes; ///< Allocation attributes.
///< Refer to EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM and
///< EFI_PCI_HOST_BRIDGE_MEM64_DECODE used by GetAllocAttributes()
///< in EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL.
UNIVERSAL_PAYLOAD_PCI_ROOT_BRIDGE_APERTURE Bus; ///< Bus aperture which can be used by the root bridge.
UNIVERSAL_PAYLOAD_PCI_ROOT_BRIDGE_APERTURE Io; ///< IO aperture which can be used by the root bridge.
UNIVERSAL_PAYLOAD_PCI_ROOT_BRIDGE_APERTURE Mem; ///< MMIO aperture below 4GB which can be used by the root bridge.
UNIVERSAL_PAYLOAD_PCI_ROOT_BRIDGE_APERTURE MemAbove4G; ///< MMIO aperture above 4GB which can be used by the root bridge.
UNIVERSAL_PAYLOAD_PCI_ROOT_BRIDGE_APERTURE PMem; ///< Prefetchable MMIO aperture below 4GB which can be used by the root bridge.
UNIVERSAL_PAYLOAD_PCI_ROOT_BRIDGE_APERTURE PMemAbove4G; ///< Prefetchable MMIO aperture above 4GB which can be used by the root bridge.
UINT32 HID; ///< PnP hardware ID of the root bridge. This value must match the corresponding
///< _HID in the ACPI name space.
UINT32 UID; ///< Unique ID that is required by ACPI if two devices have the same _HID.
///< This value must also match the corresponding _UID/_HID pair in the ACPI name space.
} UNIVERSAL_PAYLOAD_PCI_ROOT_BRIDGE;
typedef struct {
UNIVERSAL_PAYLOAD_GENERIC_HEADER Header;
BOOLEAN ResourceAssigned;
UINT8 Count;
UNIVERSAL_PAYLOAD_PCI_ROOT_BRIDGE RootBridge[0];
} UNIVERSAL_PAYLOAD_PCI_ROOT_BRIDGES;
#pragma pack()
#define UNIVERSAL_PAYLOAD_PCI_ROOT_BRIDGES_REVISION 1
extern GUID gUniversalPayloadPciRootBridgeInfoGuid;
#endif // UNIVERSAL_PAYLOAD_PCI_ROOT_BRIDGES_H_