tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/ArmVirtPkg/ArmVirt.dsc.inc

409 lines
21 KiB
PHP
Raw Normal View History

ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
ArmPlatformPkg/ArmVExpressDxe: Load FDT into the EFI Configuration Table Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ronald Cron <Ronald.Cron@arm.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16937 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-26 11:54:39 +01:00
# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
# Copyright (c) 2014, Linaro Limited. All rights reserved.
ArmVirtPkg: Link AuthVariableLib for following merged variable driver deploy AuthVariableLib and TpmMeasurementLib library classes are now linked with MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf to optionally support secure variables. For ArmVirtPkg, link AuthVariableLib and DxeTpmMeasurementLib in SecurityPkg when SECURE_BOOT_ENABLE = TRUE, and link AuthVariableLibNull and TpmMeasurementLibNull in MdeModulePkg when SECURE_BOOT_ENABLE = FALSE. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17763 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01 05:07:02 +02:00
# Copyright (c) 2015, Intel Corporation. All rights reserved.
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#
ArmVirtualizationPkg: expose debug message bitmask on build command line This enables -D DEBUG_PRINT_ERROR_LEVEL=0x8040004F style command line options. Since we're massaging the debug message bitmask anyway, let's update the description of the individual bits too in the comments, so that they match "MdePkg/Include/Library/DebugLib.h". Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16986 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-02 17:19:41 +01:00
[Defines]
DEFINE DEBUG_PRINT_ERROR_LEVEL = 0x8000004F
Add PCD for selecting terminal type at build time Add a fixed pointer PCD to allow build-time selection of VT100 or TTY terminal type. The default remains VT100 emulation. Add support for building the ARM QEMU platforms with the TTY terminal with the "-D TTY_TERMINAL" build option. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> [Roy Franz: minor edits: add TtyTerminal GUID, rename LINUX_TERMINAL to TTY_TERMINAL] Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Roy Franz <roy.franz@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17898 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-09 08:24:25 +02:00
DEFINE TTY_TERMINAL = FALSE
ArmVirtualizationPkg: expose debug message bitmask on build command line This enables -D DEBUG_PRINT_ERROR_LEVEL=0x8040004F style command line options. Since we're massaging the debug message bitmask anyway, let's update the description of the individual bits too in the comments, so that they match "MdePkg/Include/Library/DebugLib.h". Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16986 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-02 17:19:41 +01:00
ArmVirtPkg: use 4 KB section alignment for ARM DXE_RUNTIME_DRIVER modules In order to support the Properties Table memory protection feature on 32-bit ARM, build DXE_RUNTIME_DRIVER type binaries with 4 KB section alignment by setting the common-page-size linker command line option. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Zimmermann <sigmaepsilon92@gmail.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18566 6f19259b-4bc3-4df7-8a09-765794883524
2015-10-01 16:01:16 +02:00
[BuildOptions.common.EDKII.DXE_RUNTIME_DRIVER]
GCC:*_*_ARM_DLINK_FLAGS = -z common-page-size=0x1000
ArmVirtPkg: move to unified GCC linker script Move to the parametrised generic GCC linker script and set 64 KB alignment, instead of using the AARCH64 specific incremental linker script for 64 KB alignment which is about to be removed. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18140 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-03 10:23:26 +02:00
GCC:*_*_AARCH64_DLINK_FLAGS = -z common-page-size=0x10000
ArmVirtPkg RVCT: build DXE_RUNTIME_DRIVER modules with 4 KB alignment This adds the RVCT armlink command line switches to build modules of type DXE_RUNTIME_DRIVER with 4 KB PE/COFF section alignment, allowing the OS to apply stricter permissions to the .text and .data sections. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19237 6f19259b-4bc3-4df7-8a09-765794883524
2015-12-14 08:56:19 +01:00
RVCT:*_*_ARM_DLINK_FLAGS = --scatter $(EDK_TOOLS_PATH)/Scripts/Rvct-Align4K.sct
ArmVirtPkg: build runtime drivers with 64 KB section alignment This adds the 64 KB alignment overlay linker script to the linker command line of DXE_RUNTIME_DRIVER modules. This makes these modules compatible with the new Properties Table feature by aligning the .text and .data sections to 64 KB. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Olivier Martin <Olivier.Martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17825 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-06 17:58:00 +02:00
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
[LibraryClasses.common]
!if $(TARGET) == RELEASE
DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf
UncachedMemoryAllocationLib|ArmPkg/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf
!else
DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
UncachedMemoryAllocationLib|ArmPkg/Library/DebugUncachedMemoryAllocationLib/DebugUncachedMemoryAllocationLib.inf
!endif
DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
SynchronizationLib|MdePkg/Library/BaseSynchronizationLib/BaseSynchronizationLib.inf
PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf
PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
CpuLib|MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
UefiLib|MdePkg/Library/UefiLib/UefiLib.inf
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
HobLib|ArmVirtPkg/Library/ArmVirtDxeHobLib/ArmVirtDxeHobLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf
DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf
DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf
UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf
UefiApplicationEntryPoint|MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf
HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
UefiHiiServicesLib|MdeModulePkg/Library/UefiHiiServicesLib/UefiHiiServicesLib.inf
UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf
ArmVirtualizationPkg: add simple ACPI Platform Driver to the QEMU platform Introduce an ACPI platform driver for ARM / AARCH64 virtual machines. "OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf" downloads ACPI blobs from QEMU over fw_cfg, processes them, and installs the resultant ACPI tables. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16698 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-02 20:09:07 +01:00
OrderedCollectionLib|MdePkg/Library/BaseOrderedCollectionRedBlackTreeLib/BaseOrderedCollectionRedBlackTreeLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
# Allow dynamic PCDs
#
PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
# 1/123 faster than Stm or Vstm version
#BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
BaseMemoryLib|ArmPkg/Library/BaseMemoryLibStm/BaseMemoryLibStm.inf
# Networking Requirements
NetLib|MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf
DpcLib|MdeModulePkg/Library/DxeDpcLib/DxeDpcLib.inf
UdpIoLib|MdeModulePkg/Library/DxeUdpIoLib/DxeUdpIoLib.inf
IpIoLib|MdeModulePkg/Library/DxeIpIoLib/DxeIpIoLib.inf
ArmVirtPkg: include BaseStackCheckLib also for AARCH64 Some AArch64 toolchains also invoke the software stack checker functions on certain code - so include BaseStackCheckLib for AARCH64 as well as for ARM. Since this was the only difference between [LibraryClasses.ARM] and [LibraryClasses.AARCH64], merge the two into the existing [LibraryClasses.common]. At the same time, fix the grammar for the related comments. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18617 6f19259b-4bc3-4df7-8a09-765794883524
2015-10-16 17:23:46 +02:00
#
# It is not possible to prevent the ARM compiler from inserting calls to intrinsic functions.
# This library provides the instrinsic functions such a compiler may generate calls to.
#
NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
# Add support for GCC stack protector
NULL|MdePkg/Library/BaseStackCheckLib/BaseStackCheckLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
# ARM Architectural Libraries
CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLib.inf
CpuExceptionHandlerLib|MdeModulePkg/Library/CpuExceptionHandlerLibNull/CpuExceptionHandlerLibNull.inf
ArmDisassemblerLib|ArmPkg/Library/ArmDisassemblerLib/ArmDisassemblerLib.inf
DmaLib|ArmPkg/Library/ArmDmaLib/ArmDmaLib.inf
ArmGicLib|ArmPkg/Drivers/ArmGic/ArmGicLib.inf
ArmVirtPkg: implement DT-based ArmGicArchLib Since it is arguably incorrect to infer the GIC revision from CPU ID and GIC feature registers on platforms that describe the GIC in the device tree, this implements the library class ArmGicArchLib tailored for such platforms. The supported GIC revision is retrieved from the dynamic PCD that is set based on the GIC DT node. This means this library can only execute post DXE core, but this is not a problem for any of the virt platforms. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18102 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-28 22:45:36 +02:00
ArmGicArchLib|ArmVirtPkg/Library/ArmVirtGicArchLib/ArmVirtGicArchLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
ArmPlatformStackLib|ArmPlatformPkg/Library/ArmPlatformStackLib/ArmPlatformStackLib.inf
ArmSmcLib|ArmPkg/Library/ArmSmcLib/ArmSmcLib.inf
ArmHvcLib|ArmPkg/Library/ArmHvcLib/ArmHvcLib.inf
ArmGenericTimerCounterLib|ArmPkg/Library/ArmGenericTimerVirtCounterLib/ArmGenericTimerVirtCounterLib.inf
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
PlatformPeiLib|ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.inf
MemoryInitPeiLib|ArmVirtPkg/Library/ArmVirtMemoryInitPeiLib/ArmVirtMemoryInitPeiLib.inf
EfiResetSystemLib|ArmVirtPkg/Library/ArmVirtPsciResetSystemLib/ArmVirtPsciResetSystemLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
# ARM PL031 RTC Driver
RealTimeClockLib|ArmPlatformPkg/Library/PL031RealTimeClockLib/PL031RealTimeClockLib.inf
# ARM PL011 UART Driver
PL011UartLib|ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.inf
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
SerialPortLib|ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
# Uncomment (and comment out the next line) For RealView Debugger. The Standard IO window
# in the debugger will show load and unload commands for symbols. You can cut and paste this
# into the command window to load symbols. We should be able to use a script to do this, but
# the version of RVD I have does not support scripts accessing system memory.
#
#PeCoffExtraActionLib|ArmPkg/Library/RvdPeCoffExtraActionLib/RvdPeCoffExtraActionLib.inf
PeCoffExtraActionLib|ArmPkg/Library/DebugPeCoffExtraActionLib/DebugPeCoffExtraActionLib.inf
#PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf
DebugAgentLib|MdeModulePkg/Library/DebugAgentLibNull/DebugAgentLibNull.inf
DebugAgentTimerLib|EmbeddedPkg/Library/DebugAgentTimerLibNull/DebugAgentTimerLibNull.inf
ArmVirtPkg/ArmVirtQemu: drop ARM BDS and make Intel BDS the default ARM BDS support in ArmVirtQemu has been broken since SVN r17969 ("ArmPkg/BdsLib: Remove Linux loader from BdsLib") dated July 14th. Instead of fixing this, let's get rid of the ARM BDS and LinuxLoader altogether: they violate both the UEFI spec and the arm64 Linux boot protocol, and lack the level of integration with the QEMU command line that the Intel BDS has when running under ArmVirtPkg or OvmfPkg. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18153 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-04 20:41:19 +02:00
# Flattened Device Tree (FDT) access library
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
FdtLib|EmbeddedPkg/Library/FdtLib/FdtLib.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: enable PCI support Beyond including the foundational drivers in the DSC and FDF files, we enable virtio-over-PCI, and turn on QemuBootOrderLib's OFW-to-UEFI device path translation for PCI devices. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16910 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:11 +01:00
# PCI Libraries
PciLib|MdePkg/Library/BasePciLibPciExpress/BasePciLibPciExpress.inf
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
PciExpressLib|ArmVirtPkg/Library/BaseCachingPciExpressLib/BaseCachingPciExpressLib.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: enable PCI support Beyond including the foundational drivers in the DSC and FDF files, we enable virtio-over-PCI, and turn on QemuBootOrderLib's OFW-to-UEFI device path translation for PCI devices. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16910 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:11 +01:00
ArmVirtualizationPkg/ArmVirtualizationQemu: add USB keyboard input Similarly to the previous patch, we can now multiplex input from the USB keyboard. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16914 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:30 +01:00
# USB Libraries
UefiUsbLib|MdePkg/Library/UefiUsbLib/UefiUsbLib.inf
ArmVirtualizationPkg/VirtFdtDxe: wire up XenBusDxe to "xen,xen" DT node This patchs adds support to VirtFdtDxe for the Xen DT node which contains the base address of the Grant Table. This data is communicated to XenBusDxe using a XENIO_PROTOCOL instance. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16980 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-28 21:34:26 +01:00
XenIoMmioLib|OvmfPkg/Library/XenIoMmioLib/XenIoMmioLib.inf
ArmVirtualizationPkg: Enable secure boot for ArmVirtualizationQemu This adds all the required modules and library dependencies so that the ArmVirtualizationQemu platform can be built with support for UEFI Secure Boot. This support consists of the OpenSSL crypto library (whose source needs to be downloaded separately), the authenticated variable store, and authentication of executables before launching them. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17356 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-07 17:22:31 +02:00
#
# Secure Boot dependencies
#
!if $(SECURE_BOOT_ENABLE) == TRUE
IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf
TpmMeasurementLib|SecurityPkg/Library/DxeTpmMeasurementLib/DxeTpmMeasurementLib.inf
ArmVirtPkg: Link AuthVariableLib for following merged variable driver deploy AuthVariableLib and TpmMeasurementLib library classes are now linked with MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf to optionally support secure variables. For ArmVirtPkg, link AuthVariableLib and DxeTpmMeasurementLib in SecurityPkg when SECURE_BOOT_ENABLE = TRUE, and link AuthVariableLibNull and TpmMeasurementLibNull in MdeModulePkg when SECURE_BOOT_ENABLE = FALSE. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17763 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01 05:07:02 +02:00
AuthVariableLib|SecurityPkg/Library/AuthVariableLib/AuthVariableLib.inf
ArmVirtualizationPkg: Enable secure boot for ArmVirtualizationQemu This adds all the required modules and library dependencies so that the ArmVirtualizationQemu platform can be built with support for UEFI Secure Boot. This support consists of the OpenSSL crypto library (whose source needs to be downloaded separately), the authenticated variable store, and authentication of executables before launching them. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17356 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-07 17:22:31 +02:00
BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
# re-use the UserPhysicalPresent() dummy implementation from the ovmf tree
PlatformSecureLib|OvmfPkg/Library/PlatformSecureLib/PlatformSecureLib.inf
ArmVirtPkg: Link AuthVariableLib for following merged variable driver deploy AuthVariableLib and TpmMeasurementLib library classes are now linked with MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf to optionally support secure variables. For ArmVirtPkg, link AuthVariableLib and DxeTpmMeasurementLib in SecurityPkg when SECURE_BOOT_ENABLE = TRUE, and link AuthVariableLibNull and TpmMeasurementLibNull in MdeModulePkg when SECURE_BOOT_ENABLE = FALSE. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17763 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01 05:07:02 +02:00
!else
TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
ArmVirtualizationPkg: Enable secure boot for ArmVirtualizationQemu This adds all the required modules and library dependencies so that the ArmVirtualizationQemu platform can be built with support for UEFI Secure Boot. This support consists of the OpenSSL crypto library (whose source needs to be downloaded separately), the authenticated variable store, and authentication of executables before launching them. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17356 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-07 17:22:31 +02:00
!endif
ArmVirtPkg: Add VarCheckLib library mapping Since Variable driver has been updated to consume the separated VarCheckLib. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18283 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-25 05:00:20 +02:00
VarCheckLib|MdeModulePkg/Library/VarCheckLib/VarCheckLib.inf
ArmVirtualizationPkg: Enable secure boot for ArmVirtualizationQemu This adds all the required modules and library dependencies so that the ArmVirtualizationQemu platform can be built with support for UEFI Secure Boot. This support consists of the OpenSSL crypto library (whose source needs to be downloaded separately), the authenticated variable store, and authentication of executables before launching them. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17356 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-07 17:22:31 +02:00
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
[LibraryClasses.common.SEC]
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
ArmPlatformSecExtraActionLib|ArmPlatformPkg/Library/DebugSecExtraActionLib/DebugSecExtraActionLib.inf
DebugAgentLib|ArmPkg/Library/DebugAgentSymbolsBaseLib/DebugAgentSymbolsBaseLib.inf
DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLibBase.inf
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
SerialPortLib|ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
ArmVirtPkg/ArmVirtQemu: move to ArmPkg version of PeiServicesTablePointerLib As pointed out by Eugene, the ArmPlatformPkg implementation of PeiServicesTablePointerLib violates the PI sec, since it uses ArmPlatformGlobalVariableLib to store the PEI services table pointer rather than the thread ID cpu registers as the spec requires. So instead, move to the ArmPkg version of this library, which does adhere to the PI spec. Reported-by: Eugene Cohen <eugene@hp.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18985 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-27 18:05:36 +01:00
PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
[LibraryClasses.common.PEI_CORE]
PcdLib|MdePkg/Library/PeiPcdLib/PeiPcdLib.inf
HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
PeiCoreEntryPoint|MdePkg/Library/PeiCoreEntryPoint/PeiCoreEntryPoint.inf
PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
ArmVirtPkg/ArmVirtQemu: move to ArmPkg version of PeiServicesTablePointerLib As pointed out by Eugene, the ArmPlatformPkg implementation of PeiServicesTablePointerLib violates the PI sec, since it uses ArmPlatformGlobalVariableLib to store the PEI services table pointer rather than the thread ID cpu registers as the spec requires. So instead, move to the ArmPkg version of this library, which does adhere to the PI spec. Reported-by: Eugene Cohen <eugene@hp.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18985 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-27 18:05:36 +01:00
PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
SerialPortLib|ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
[LibraryClasses.common.PEIM]
PcdLib|MdePkg/Library/PeiPcdLib/PeiPcdLib.inf
HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
PeimEntryPoint|MdePkg/Library/PeimEntryPoint/PeimEntryPoint.inf
PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
PeiResourcePublicationLib|MdePkg/Library/PeiResourcePublicationLib/PeiResourcePublicationLib.inf
UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
ArmVirtPkg/ArmVirtQemu: move to ArmPkg version of PeiServicesTablePointerLib As pointed out by Eugene, the ArmPlatformPkg implementation of PeiServicesTablePointerLib violates the PI sec, since it uses ArmPlatformGlobalVariableLib to store the PEI services table pointer rather than the thread ID cpu registers as the spec requires. So instead, move to the ArmPkg version of this library, which does adhere to the PI spec. Reported-by: Eugene Cohen <eugene@hp.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18985 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-27 18:05:36 +01:00
PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
SerialPortLib|ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
[LibraryClasses.common.DXE_CORE]
HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf
MemoryAllocationLib|MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllocationLib.inf
DxeCoreEntryPoint|MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf
ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
PerformanceLib|MdeModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.inf
[LibraryClasses.common.DXE_DRIVER]
ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.inf
PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
[LibraryClasses.common.UEFI_APPLICATION]
UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf
PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
ArmVirtPkg/ArmVirtQemu: add LinuxLoader UEFI app to ARM build The ARM build still needs an intermediate loader to boot Linux, since ARM/Linux has no builtin UEFI boot stub (yet). So add the LinuxLoader UEFI application to the FV, and enable the FvSimpleFileSystemDxe driver so that we can invoke the Linux loader from the shell, e.g., Shell> linuxloader fs2:zImage -c console=ttyAMA0 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18155 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-04 20:41:45 +02:00
ShellLib|ShellPkg/Library/UefiShellLib/UefiShellLib.inf
FileHandleLib|MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf
SortLib|MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
[LibraryClasses.common.UEFI_DRIVER]
ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf
ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
[LibraryClasses.common.DXE_RUNTIME_DRIVER]
MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
ArmVirtualizationPkg: Enable secure boot for ArmVirtualizationQemu This adds all the required modules and library dependencies so that the ArmVirtualizationQemu platform can be built with support for UEFI Secure Boot. This support consists of the OpenSSL crypto library (whose source needs to be downloaded separately), the authenticated variable store, and authentication of executables before launching them. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17356 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-07 17:22:31 +02:00
!if $(SECURE_BOOT_ENABLE) == TRUE
BaseCryptLib|CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf
!endif
ArmVirtPkg: add secure boot support to 32-bit ARM targets Building the 32-bit ARM targets with secure boot enabled requires a library resolution for the ArmSoftfloatLib dependency of OpenSslLib. So provide one. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19032 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-30 09:57:12 +01:00
[LibraryClasses.ARM]
ArmSoftFloatLib|ArmPkg/Library/ArmSoftFloatLib/ArmSoftFloatLib.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
[BuildOptions]
RVCT:RELEASE_*_*_CC_FLAGS = -DMDEPKG_NDEBUG
GCC:RELEASE_*_*_CC_FLAGS = -DMDEPKG_NDEBUG
################################################################################
#
# Pcd Section - list of all EDK II PCD Entries defined by this Platform
#
################################################################################
[PcdsFeatureFlag.common]
gEfiMdePkgTokenSpaceGuid.PcdComponentNameDisable|TRUE
gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnosticsDisable|TRUE
gEfiMdePkgTokenSpaceGuid.PcdComponentName2Disable|TRUE
gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnostics2Disable|TRUE
#
# Control what commands are supported from the UI
# Turn these on and off to add features or save size
#
gEmbeddedTokenSpaceGuid.PcdEmbeddedMacBoot|TRUE
gEmbeddedTokenSpaceGuid.PcdEmbeddedDirCmd|TRUE
gEmbeddedTokenSpaceGuid.PcdEmbeddedHobCmd|TRUE
gEmbeddedTokenSpaceGuid.PcdEmbeddedHwDebugCmd|TRUE
gEmbeddedTokenSpaceGuid.PcdEmbeddedPciDebugCmd|TRUE
gEmbeddedTokenSpaceGuid.PcdEmbeddedIoEnable|FALSE
gEmbeddedTokenSpaceGuid.PcdEmbeddedScriptCmd|FALSE
gEmbeddedTokenSpaceGuid.PcdCacheEnable|TRUE
# Use the Vector Table location in CpuDxe. We will not copy the Vector Table at PcdCpuVectorBaseAddress
gArmTokenSpaceGuid.PcdRelocateVectorTable|FALSE
gEmbeddedTokenSpaceGuid.PcdPrePiProduceMemoryTypeInformationHob|TRUE
gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|TRUE
[PcdsFixedAtBuild.common]
gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength|1000000
gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength|1000000
gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|1000000
gEfiMdePkgTokenSpaceGuid.PcdSpinLockTimeout|10000000
gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue|0xAF
gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|1
gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320
# DEBUG_ASSERT_ENABLED 0x01
# DEBUG_PRINT_ENABLED 0x02
# DEBUG_CODE_ENABLED 0x04
# CLEAR_MEMORY_ENABLED 0x08
# ASSERT_BREAKPOINT_ENABLED 0x10
# ASSERT_DEADLOOP_ENABLED 0x20
!if $(TARGET) == RELEASE
gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x21
!else
gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f
!endif
# DEBUG_INIT 0x00000001 // Initialization
# DEBUG_WARN 0x00000002 // Warnings
# DEBUG_LOAD 0x00000004 // Load events
# DEBUG_FS 0x00000008 // EFI File system
# DEBUG_POOL 0x00000010 // Alloc & Free's
# DEBUG_PAGE 0x00000020 // Alloc & Free's
ArmVirtualizationPkg: expose debug message bitmask on build command line This enables -D DEBUG_PRINT_ERROR_LEVEL=0x8040004F style command line options. Since we're massaging the debug message bitmask anyway, let's update the description of the individual bits too in the comments, so that they match "MdePkg/Include/Library/DebugLib.h". Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16986 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-02 17:19:41 +01:00
# DEBUG_INFO 0x00000040 // Informational debug messages
# DEBUG_DISPATCH 0x00000080 // PEI/DXE/SMM Dispatchers
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
# DEBUG_VARIABLE 0x00000100 // Variable
# DEBUG_BM 0x00000400 // Boot Manager
# DEBUG_BLKIO 0x00001000 // BlkIo Driver
# DEBUG_NET 0x00004000 // SNI Driver
# DEBUG_UNDI 0x00010000 // UNDI Driver
# DEBUG_LOADFILE 0x00020000 // UNDI Driver
# DEBUG_EVENT 0x00080000 // Event messages
# DEBUG_GCD 0x00100000 // Global Coherency Database changes
# DEBUG_CACHE 0x00200000 // Memory range cachability changes
ArmVirtualizationPkg: expose debug message bitmask on build command line This enables -D DEBUG_PRINT_ERROR_LEVEL=0x8040004F style command line options. Since we're massaging the debug message bitmask anyway, let's update the description of the individual bits too in the comments, so that they match "MdePkg/Include/Library/DebugLib.h". Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16986 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-02 17:19:41 +01:00
# DEBUG_VERBOSE 0x00400000 // Detailed debug messages that may
# // significantly impact boot performance
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
# DEBUG_ERROR 0x80000000 // Error
ArmVirtualizationPkg: expose debug message bitmask on build command line This enables -D DEBUG_PRINT_ERROR_LEVEL=0x8040004F style command line options. Since we're massaging the debug message bitmask anyway, let's update the description of the individual bits too in the comments, so that they match "MdePkg/Include/Library/DebugLib.h". Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16986 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-02 17:19:41 +01:00
gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|$(DEBUG_PRINT_ERROR_LEVEL)
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07
#
# Optional feature to help prevent EFI memory map fragments
# Turned on and off via: PcdPrePiProduceMemoryTypeInformationHob
# Values are in EFI Pages (4K). DXE Core will make sure that
# at least this much of each type of memory can be allocated
# from a single memory range. This way you only end up with
# maximum of two fragements for each type in the memory map
# (the memory used, and the free memory that was prereserved
# but not used).
#
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIMemoryNVS|0
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiReservedMemoryType|0
ArmVirtPkg: increase memory preallocations for secure build This is a followup to r17554 ("ArmVirtPkg: increase memory preallocations to reduce region count") that increases the sizes of the preallocated regions to account for the footprint of the crypto and authentication libraries. This is only done if secure boot is enabled at build time, to prevent imposing a larger minimum RAM size on non-secure builds. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Olivier Martin <Olivier.Martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17646 6f19259b-4bc3-4df7-8a09-765794883524
2015-06-16 16:27:18 +02:00
!if $(SECURE_BOOT_ENABLE) == TRUE
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|600
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|400
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesCode|1500
!else
ArmVirtPkg: increase memory preallocations to reduce region count This updates the sizes of the preallocated regions so that the number of distinct regions that exists is minimal at the time we exit boot services. For a typical run of the ArmVirtQemu platform, we get the following utilization numbers: Reserved : 4 Pages (16,384 Bytes) LoaderCode: 210 Pages (860,160 Bytes) LoaderData: 0 Pages (0 Bytes) BS_Code : 355 Pages (1,454,080 Bytes) BS_Data : 6,807 Pages (27,881,472 Bytes) RT_Code : 112 Pages (458,752 Bytes) RT_Data : 288 Pages (1,179,648 Bytes) ACPI_Recl : 32 Pages (131,072 Bytes) ACPI_NVS : 0 Pages (0 Bytes) MMIO : 16,385 Pages (67,112,960 Bytes) MMIO_Port : 0 Pages (0 Bytes) PalCode : 0 Pages (0 Bytes) Available : 123,264 Pages (504,889,344 Bytes) -------------- Total Memory: 511 MB (536,854,528 Bytes) Strangely enough, the allocation count of 20,000 pages for BS_Data does not result in those regions being merged. For BS_Code, RT_Code and RT_Data, the increased preallocation results in the following reduction in the number of regions. 0x000040000000-0x00004000ffff [Loader Data | | | | | |WB|WT|WC|UC] - 0x000040010000-0x0000b66bbfff [Conventional Memory| | | | | |WB|WT|WC|UC] - 0x0000b66bc000-0x0000b66d0fff [Loader Data | | | | | |WB|WT|WC|UC] - 0x0000b66d1000-0x0000b6f6bfff [Loader Code | | | | | |WB|WT|WC|UC] - 0x0000b6f6c000-0x0000b6f6ffff [Reserved | | | | | |WB|WT|WC|UC]* - 0x0000b6f70000-0x0000b6f8ffff [Runtime Code |RUN| | | | |WB|WT|WC|UC]* - 0x0000b6f90000-0x0000b6faffff [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC]* - 0x0000b6fb0000-0x0000b6fcffff [Runtime Code |RUN| | | | |WB|WT|WC|UC]* - 0x0000b6fd0000-0x0000b701ffff [Runtime Data |RUN| | | | |WB|WT|WC|UC]* - 0x0000b7020000-0x0000b702ffff [Runtime Code |RUN| | | | |WB|WT|WC|UC]* - 0x0000b7030000-0x0000b70cffff [Runtime Data |RUN| | | | |WB|WT|WC|UC]* - 0x0000b70d0000-0x0000b70dffff [Runtime Code |RUN| | | | |WB|WT|WC|UC]* + 0x000040010000-0x0000b680bfff [Conventional Memory| | | | | |WB|WT|WC|UC] + 0x0000b680c000-0x0000b6820fff [Loader Data | | | | | |WB|WT|WC|UC] + 0x0000b6821000-0x0000b70bbfff [Loader Code | | | | | |WB|WT|WC|UC] + 0x0000b70bc000-0x0000b70bffff [Reserved | | | | | |WB|WT|WC|UC]* + 0x0000b70c0000-0x0000b70dffff [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC]* 0x0000b70e0000-0x0000b9f87fff [Conventional Memory| | | | | |WB|WT|WC|UC] 0x0000b9f88000-0x0000bb921fff [Boot Data | | | | | |WB|WT|WC|UC] 0x0000bb922000-0x0000bb9bffff [Conventional Memory| | | | | |WB|WT|WC|UC] 0x0000bb9c0000-0x0000bbbb0fff [Boot Data | | | | | |WB|WT|WC|UC] 0x0000bbbb1000-0x0000bbbeffff [Conventional Memory| | | | | |WB|WT|WC|UC] 0x0000bbbf0000-0x0000bbf1ffff [Boot Data | | | | | |WB|WT|WC|UC] - 0x0000bbf20000-0x0000bedfffff [Conventional Memory| | | | | |WB|WT|WC|UC] - 0x0000bee00000-0x0000bf71ffff [Loader Data | | | | | |WB|WT|WC|UC] - 0x0000bf720000-0x0000bf7ccfff [Conventional Memory| | | | | |WB|WT|WC|UC] - 0x0000bf7cd000-0x0000bf92ffff [Boot Code | | | | | |WB|WT|WC|UC] - 0x0000bf930000-0x0000bf93ffff [Runtime Code |RUN| | | | |WB|WT|WC|UC]* - 0x0000bf940000-0x0000bf95ffff [Conventional Memory| | | | | |WB|WT|WC|UC] - 0x0000bf960000-0x0000bf97ffff [Runtime Data |RUN| | | | |WB|WT|WC|UC]* + 0x0000bbf20000-0x0000bebfffff [Conventional Memory| | | | | |WB|WT|WC|UC] + 0x0000bec00000-0x0000bf51ffff [Loader Data | | | | | |WB|WT|WC|UC] + 0x0000bf520000-0x0000bf65cfff [Conventional Memory| | | | | |WB|WT|WC|UC] + 0x0000bf65d000-0x0000bf7bffff [Boot Code | | | | | |WB|WT|WC|UC] + 0x0000bf7c0000-0x0000bf84ffff [Runtime Code |RUN| | | | |WB|WT|WC|UC]* + 0x0000bf850000-0x0000bf86ffff [Conventional Memory| | | | | |WB|WT|WC|UC] + 0x0000bf870000-0x0000bf97ffff [Runtime Data |RUN| | | | |WB|WT|WC|UC]* 0x0000bf980000-0x0000bf997fff [Conventional Memory| | | | | |WB|WT|WC|UC] 0x0000bf998000-0x0000bf99afff [Boot Data | | | | | |WB|WT|WC|UC] 0x0000bf99b000-0x0000bf9aefff [Conventional Memory| | | | | |WB|WT|WC|UC] Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17554 6f19259b-4bc3-4df7-8a09-765794883524
2015-06-03 18:11:47 +02:00
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|300
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|150
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesCode|1000
ArmVirtPkg: increase memory preallocations for secure build This is a followup to r17554 ("ArmVirtPkg: increase memory preallocations to reduce region count") that increases the sizes of the preallocated regions to account for the footprint of the crypto and authentication libraries. This is only done if secure boot is enabled at build time, to prevent imposing a larger minimum RAM size on non-secure builds. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Olivier Martin <Olivier.Martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17646 6f19259b-4bc3-4df7-8a09-765794883524
2015-06-16 16:27:18 +02:00
!endif
ArmVirtPkg: reduce preallocation of boot services data pages Commit SVN r18503 ("MdeModulePkg DxeCore: Take the range in resource HOB for PHIT as higher priority") changed the GCD init logic to take the sum of the region sizes in gMemoryTypeInformation[] into account when estimating the minimal amount of memory needed to boot the system. Unfortunately, as an unintended side effect, this change results in boot failures of ArmVirtQemu when running with QEMU's default memory size of 128 MB. The reason is that the sum of the gMemoryTypeInformation region sizes plus the size of the inital PEI region exceeds 128 MB. Since we do not actually need to preallocate 20,000 pages' worth of BootServicesData memory, reduce this figure to the more reasonable 12,000. Reported-by: Mark Rutland <mark.rutland@arm.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18533 6f19259b-4bc3-4df7-8a09-765794883524
2015-09-22 17:50:30 +02:00
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesData|12000
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderCode|20
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderData|0
#
# ARM Pcds
#
gArmTokenSpaceGuid.PcdArmUncachedMemoryMask|0x0000000000000000
ArmVirtualizationPkg: Enable secure boot for ArmVirtualizationQemu This adds all the required modules and library dependencies so that the ArmVirtualizationQemu platform can be built with support for UEFI Secure Boot. This support consists of the OpenSSL crypto library (whose source needs to be downloaded separately), the authenticated variable store, and authentication of executables before launching them. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17356 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-07 17:22:31 +02:00
!if $(SECURE_BOOT_ENABLE) == TRUE
# override the default values from SecurityPkg to ensure images from all sources are verified in secure boot
gEfiSecurityPkgTokenSpaceGuid.PcdOptionRomImageVerificationPolicy|0x04
gEfiSecurityPkgTokenSpaceGuid.PcdFixedMediaImageVerificationPolicy|0x04
gEfiSecurityPkgTokenSpaceGuid.PcdRemovableMediaImageVerificationPolicy|0x04
!endif
Add PCD for selecting terminal type at build time Add a fixed pointer PCD to allow build-time selection of VT100 or TTY terminal type. The default remains VT100 emulation. Add support for building the ARM QEMU platforms with the TTY terminal with the "-D TTY_TERMINAL" build option. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> [Roy Franz: minor edits: add TtyTerminal GUID, rename LINUX_TERMINAL to TTY_TERMINAL] Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Roy Franz <roy.franz@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17898 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-09 08:24:25 +02:00
!if $(TTY_TERMINAL) == TRUE
# Set terminal type to TtyTerm, the value encoded is EFI_TTY_TERM_GUID
gArmVirtTokenSpaceGuid.PcdTerminalTypeGuidBuffer|{0x80, 0x6d, 0x91, 0x7d, 0xb1, 0x5b, 0x8c, 0x45, 0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94}
!endif
ArmVirtPkg: set max physical address width to 40 bits When executing on a LPAE capable 32-bit ARM platform, we support up to 40 bits of physical address space so set PcdPrePiCpuMemorySize accordingly. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18428 6f19259b-4bc3-4df7-8a09-765794883524
2015-09-09 16:48:41 +02:00
[PcdsFixedAtBuild.ARM]
gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize|40
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
[Components.common]
#
# Networking stack
#
MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
ArmVirtualizationPkg: build UEFI shell from source Including a prebuilt shell executable in the firmware binary is suboptimal practice, especially given that the source code of the UEFI shell resides in the same edk2 tree. Benefits of building the shell from source are partly technical (a developer patching the shell can actually see the results), partly ideological (the nominally built-from-source firmware is actually built from source). "Security" might be worth a mention too. The stanza for the [Components.common] section of "ArmVirtualization.dsc.inc" originates from under OvmfPkg. Cc: Leif Lindholm <Leif.Lindholm@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17052 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-16 20:56:54 +01:00
#
# UEFI application (Shell Embedded Boot Loader)
#
ShellPkg/Application/Shell/Shell.inf {
<LibraryClasses>
ShellCommandLib|ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf
NULL|ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf
NULL|ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf
NULL|ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3CommandsLib.inf
NULL|ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1CommandsLib.inf
NULL|ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1CommandsLib.inf
NULL|ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1CommandsLib.inf
NULL|ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1CommandsLib.inf
ArmVirtPkg: build the TFTP command into the UEFI shell The TFTP command is easy to use, it has very nice documentation (accessible with "HELP TFTP" in the shell), and it's a very versatile tool for downloading files from the host to the guest, via virtual network, while the guest is in the UEFI shell. Even better, enabling this command in the shell increases the uncompressed FVMAIN size only by 8192 bytes, in my AARCH64 build of VirtArmQemu.dsc, and the final size increase (after LZMA compression) that is visible in the FVMAIN_COMPACT volume is merely 1976 bytes. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18555 6f19259b-4bc3-4df7-8a09-765794883524
2015-09-25 19:23:03 +02:00
NULL|ShellPkg/Library/UefiShellTftpCommandLib/UefiShellTftpCommandLib.inf
ArmVirtualizationPkg: build UEFI shell from source Including a prebuilt shell executable in the firmware binary is suboptimal practice, especially given that the source code of the UEFI shell resides in the same edk2 tree. Benefits of building the shell from source are partly technical (a developer patching the shell can actually see the results), partly ideological (the nominally built-from-source firmware is actually built from source). "Security" might be worth a mention too. The stanza for the [Components.common] section of "ArmVirtualization.dsc.inc" originates from under OvmfPkg. Cc: Leif Lindholm <Leif.Lindholm@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17052 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-16 20:56:54 +01:00
HandleParsingLib|ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.inf
PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
BcfgCommandLib|ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.inf
<PcdsFixedAtBuild>
gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xFF
gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|8000
}