audk/MdePkg/Include/Protocol/LegacyRegion2.h

242 lines
11 KiB
C
Raw Normal View History

/** @file
The Legacy Region Protocol controls the read, write and boot-lock attributes for
the region 0xC0000 to 0xFFFFF.
Copyright (c) 2009, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@par Revision Reference:
This Protocol is defined in UEFI Platform Initialization Specification 1.2
Volume 5: Standards
@attention Some definitions in this file do not match the PI 1.2 Specification.
**/
#ifndef __LEGACY_REGION2_H__
#define __LEGACY_REGION2_H__
#define EFI_LEGACY_REGION2_PROTOCOL_GUID \
{ \
0x70101eaf, 0x85, 0x440c, {0xb3, 0x56, 0x8e, 0xe3, 0x6f, 0xef, 0x24, 0xf0 } \
}
typedef struct _EFI_LEGACY_REGION2_PROTOCOL EFI_LEGACY_REGION2_PROTOCOL;
/**
Modify the hardware to allow (decode) or disallow (not decode) memory reads in a region.
If the On parameter evaluates to TRUE, this function enables memory reads in the address range
Start to (Start + Length - 1).
If the On parameter evaluates to FALSE, this function disables memory reads in the address range
Start to (Start + Length - 1).
@param This[in] Indicates the EFI_LEGACY_REGION2_PROTOCOL instance.
@param Start[in] The beginning of the physical address of the region whose attributes
should be modified.
@param Length[in] The number of bytes of memory whose attributes should be modified.
The actual number of bytes modified may be greater than the number
specified.
@param Granularity[out] The number of bytes in the last region affected. This may be less
than the total number of bytes affected if the starting address
was not aligned to a region's starting address or if the length
was greater than the number of bytes in the first region.
@param On[in] Decode / Non-Decode flag.
@retval EFI_SUCCESS The region's attributes were successfully modified.
@retval EFI_INVALID_PARAMETER If Start or Length describe an address not in the Legacy Region.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_LEGACY_REGION2_DECODE) (
IN EFI_LEGACY_REGION2_PROTOCOL *This,
IN UINT32 Start,
IN UINT32 Length,
OUT UINT32 *Granularity,
IN BOOLEAN *On
);
/**
Modify the hardware to disallow memory writes in a region.
This function changes the attributes of a memory range to not allow writes.
@param This[in] Indicates the EFI_LEGACY_REGION2_PROTOCOL instance.
@param Start[in] The beginning of the physical address of the region whose
attributes should be modified.
@param Length[in] The number of bytes of memory whose attributes should be modified.
The actual number of bytes modified may be greater than the number
specified.
@param Granularity[out] The number of bytes in the last region affected. This may be less
than the total number of bytes affected if the starting address was
not aligned to a region's starting address or if the length was
greater than the number of bytes in the first region.
@retval EFI_SUCCESS The region's attributes were successfully modified.
@retval EFI_INVALID_PARAMETER If Start or Length describe an address not in the Legacy Region.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_LEGACY_REGION2_LOCK) (
IN EFI_LEGACY_REGION2_PROTOCOL *This,
IN UINT32 Start,
IN UINT32 Length,
OUT UINT32 *Granularity
);
/**
Modify the hardware to disallow memory attribute changes in a region.
This function makes the attributes of a region read only. Once a region is boot-locked with this
function, the read and write attributes of that region cannot be changed until a power cycle has
reset the boot-lock attribute. Calls to Decode(), Lock() and Unlock() will have no effect.
@param This[in] Indicates the EFI_LEGACY_REGION2_PROTOCOL instance.
@param Start[in] The beginning of the physical address of the region whose
attributes should be modified.
@param Length[in] The number of bytes of memory whose attributes should be modified.
The actual number of bytes modified may be greater than the number
specified.
@param Granularity[out] The number of bytes in the last region affected. This may be less
than the total number of bytes affected if the starting address was
not aligned to a region's starting address or if the length was
greater than the number of bytes in the first region.
@retval EFI_SUCCESS The region's attributes were successfully modified.
@retval EFI_INVALID_PARAMETER If Start or Length describe an address not in the Legacy Region.
@retval EFI_UNSUPPORTED The chipset does not support locking the configuration registers in
a way that will not affect memory regions outside the legacy memory
region.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_LEGACY_REGION2_BOOT_LOCK)(
IN EFI_LEGACY_REGION2_PROTOCOL *This,
IN UINT32 Start,
IN UINT32 Length,
OUT UINT32 *Granularity OPTIONAL
);
/**
Modify the hardware to allow memory writes in a region.
This function changes the attributes of a memory range to allow writes.
@param This[in] Indicates the EFI_LEGACY_REGION2_PROTOCOL instance.
@param Start[in] The beginning of the physical address of the region whose
attributes should be modified.
@param Length[in] The number of bytes of memory whose attributes should be modified.
The actual number of bytes modified may be greater than the number
specified.
@param Granularity[out] The number of bytes in the last region affected. This may be less
than the total number of bytes affected if the starting address was
not aligned to a region's starting address or if the length was
greater than the number of bytes in the first region.
@retval EFI_SUCCESS The region's attributes were successfully modified.
@retval EFI_INVALID_PARAMETER If Start or Length describe an address not in the Legacy Region.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_LEGACY_REGION2_UNLOCK) (
IN EFI_LEGACY_REGION2_PROTOCOL *This,
IN UINT32 Start,
IN UINT32 Length,
OUT UINT32 *Granularity
);
typedef enum {
LegacyRegionDecoded, ///< This region is currently set to allow reads.
LegacyRegionNotDecoded, ///< This region is currently set to not allow reads.
LegacyRegionWriteEnabled, ///< This region is currently set to allow writes.
LegacyRegionWriteDisabled, ///< This region is currently set to write protected.
LegacyRegionBootLocked, ///< This region's attributes are locked, cannot be modified until
///< after a power cycle.
LegacyRegionNotLocked ///< This region's attributes are not locked.
} EFI_LEGACY_REGION_ATTRIBUTE;
typedef struct {
///
/// The beginning of the physical address of this
/// region.
///
UINT32 Start;
///
/// The number of bytes in this region.
///
UINT32 Length;
///
/// Attribute of the Legacy Region Descriptor that
/// describes the capabilities for that memory region.
///
EFI_LEGACY_REGION_ATTRIBUTE Attribute;
///
/// Describes the byte length programmability
/// associated with the Start address and the specified
/// Attribute setting.
UINT32 Granularity;
} EFI_LEGACY_REGION_DESCRIPTOR;
/**
Get region information for the attributes of the Legacy Region.
This function is used to discover the granularity of the attributes for the memory in the legacy
region. Each attribute may have a different granularity and the granularity may not be the same
for all memory ranges in the legacy region.
@param This[in] Indicates the EFI_LEGACY_REGION2_PROTOCOL instance.
@param DescriptorCount[out] The number of region descriptor entries returned in the Descriptor
buffer.
@param Descriptor[out] A pointer to a pointer used to return a buffer where the legacy
region information is deposited. This buffer will contain a list of
DescriptorCount number of region descriptors. This function will
provide the memory for the buffer.
@retval EFI_SUCCESS The information structure was returned.
@retval EFI_UNSUPPORTED This function is not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_LEGACY_REGION_GET_INFO) (
IN EFI_LEGACY_REGION2_PROTOCOL *This,
OUT UINT32 *DescriptorCount,
OUT EFI_LEGACY_REGION_DESCRIPTOR **Descriptor
);
///
/// The EFI_LEGACY_REGION2_PROTOCOL is used to abstract the hardware control of the memory
/// attributes of the Option ROM shadowing region, 0xC0000 to 0xFFFFF.
/// There are three memory attributes that can be modified through this protocol: read, write and
/// boot-lock. These protocols may be set in any combination.
///
struct _EFI_LEGACY_REGION2_PROTOCOL {
EFI_LEGACY_REGION2_DECODE Decode;
EFI_LEGACY_REGION2_LOCK Lock;
EFI_LEGACY_REGION2_BOOT_LOCK BootLock;
EFI_LEGACY_REGION2_UNLOCK UnLock;
EFI_LEGACY_REGION_GET_INFO GetInfo;
};
extern EFI_GUID gEfiLegacyRegion2ProtocolGuid;
#endif