audk/OvmfPkg/Sec/X64/SecEntry.nasm

76 lines
2.8 KiB
NASM
Raw Normal View History

;------------------------------------------------------------------------------
;*
;* Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.<BR>
;* This program and the accompanying materials
;* are licensed and made available under the terms and conditions of the BSD License
;* which accompanies this distribution. The full text of the license may be found at
;* http://opensource.org/licenses/bsd-license.php
;*
;* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
;* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;*
;* CpuAsm.asm
;*
;* Abstract:
;*
;------------------------------------------------------------------------------
#include <Base.h>
DEFAULT REL
SECTION .text
extern ASM_PFX(SecCoreStartupWithStack)
;
; SecCore Entry Point
;
; Processor is in flat protected mode
;
; @param[in] RAX Initial value of the EAX register (BIST: Built-in Self Test)
; @param[in] DI 'BP': boot-strap processor, or 'AP': application processor
; @param[in] RBP Pointer to the start of the Boot Firmware Volume
OvmfPkg/Sec/X64: seed the temporary RAM with PcdInitValueInTempStack This allows the PEI core to report the maximum temporary SEC/PEI stack usage on the DEBUG_INFO level, in the PeiCheckAndSwitchStack() function [MdeModulePkg/Core/Pei/Dispatcher/Dispatcher.c]: * Normal boot: > Temp Stack : BaseAddress=0x814000 Length=0x4000 > Temp Heap : BaseAddress=0x810000 Length=0x4000 > Total temporary memory: 32768 bytes. > temporary memory stack ever used: 5080 bytes. <---- > temporary memory heap used for HobList: 8080 bytes. > temporary memory heap occupied by memory pages: 0 bytes. * S3 resume (no SMM / PEI decompression) > Temp Stack : BaseAddress=0x814000 Length=0x4000 > Temp Heap : BaseAddress=0x810000 Length=0x4000 > Total temporary memory: 32768 bytes. > temporary memory stack ever used: 5048 bytes. <---- > temporary memory heap used for HobList: 7112 bytes. > temporary memory heap occupied by memory pages: 0 bytes. I unit-tested this change by transitorily adding an infinite loop right after the "rep stosq", and dumping the guest's temp SEC/PEI RAM (32KB currently) while the guest was stuck in the loop. The dump includes one dword from before and after the temp SEC/PEI RAM: > $ virsh qemu-monitor-command GUEST_NAME --hmp 'xp /8194wx 0x80FFFC' > > 000000000080fffc: 0x00000000 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 > 000000000081000c: 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 > ... > 0000000000817fec: 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 > 0000000000817ffc: 0x5aa55aa5 0x00000000 Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=747 Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2017-11-08 20:32:30 +01:00
; @param[in] DS Selector allowing flat access to all addresses
; @param[in] ES Selector allowing flat access to all addresses
; @param[in] FS Selector allowing flat access to all addresses
; @param[in] GS Selector allowing flat access to all addresses
; @param[in] SS Selector allowing flat access to all addresses
;
; @return None This routine does not return
;
global ASM_PFX(_ModuleEntryPoint)
ASM_PFX(_ModuleEntryPoint):
OvmfPkg/Sec/X64: seed the temporary RAM with PcdInitValueInTempStack This allows the PEI core to report the maximum temporary SEC/PEI stack usage on the DEBUG_INFO level, in the PeiCheckAndSwitchStack() function [MdeModulePkg/Core/Pei/Dispatcher/Dispatcher.c]: * Normal boot: > Temp Stack : BaseAddress=0x814000 Length=0x4000 > Temp Heap : BaseAddress=0x810000 Length=0x4000 > Total temporary memory: 32768 bytes. > temporary memory stack ever used: 5080 bytes. <---- > temporary memory heap used for HobList: 8080 bytes. > temporary memory heap occupied by memory pages: 0 bytes. * S3 resume (no SMM / PEI decompression) > Temp Stack : BaseAddress=0x814000 Length=0x4000 > Temp Heap : BaseAddress=0x810000 Length=0x4000 > Total temporary memory: 32768 bytes. > temporary memory stack ever used: 5048 bytes. <---- > temporary memory heap used for HobList: 7112 bytes. > temporary memory heap occupied by memory pages: 0 bytes. I unit-tested this change by transitorily adding an infinite loop right after the "rep stosq", and dumping the guest's temp SEC/PEI RAM (32KB currently) while the guest was stuck in the loop. The dump includes one dword from before and after the temp SEC/PEI RAM: > $ virsh qemu-monitor-command GUEST_NAME --hmp 'xp /8194wx 0x80FFFC' > > 000000000080fffc: 0x00000000 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 > 000000000081000c: 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 > ... > 0000000000817fec: 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 > 0000000000817ffc: 0x5aa55aa5 0x00000000 Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=747 Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2017-11-08 20:32:30 +01:00
;
; Fill the temporary RAM with the initial stack value.
; The loop below will seed the heap as well, but that's harmless.
;
mov rax, (FixedPcdGet32 (PcdInitValueInTempStack) << 32) | FixedPcdGet32 (PcdInitValueInTempStack)
; qword to store
OvmfPkg/Sec/X64: seed the temporary RAM with PcdInitValueInTempStack This allows the PEI core to report the maximum temporary SEC/PEI stack usage on the DEBUG_INFO level, in the PeiCheckAndSwitchStack() function [MdeModulePkg/Core/Pei/Dispatcher/Dispatcher.c]: * Normal boot: > Temp Stack : BaseAddress=0x814000 Length=0x4000 > Temp Heap : BaseAddress=0x810000 Length=0x4000 > Total temporary memory: 32768 bytes. > temporary memory stack ever used: 5080 bytes. <---- > temporary memory heap used for HobList: 8080 bytes. > temporary memory heap occupied by memory pages: 0 bytes. * S3 resume (no SMM / PEI decompression) > Temp Stack : BaseAddress=0x814000 Length=0x4000 > Temp Heap : BaseAddress=0x810000 Length=0x4000 > Total temporary memory: 32768 bytes. > temporary memory stack ever used: 5048 bytes. <---- > temporary memory heap used for HobList: 7112 bytes. > temporary memory heap occupied by memory pages: 0 bytes. I unit-tested this change by transitorily adding an infinite loop right after the "rep stosq", and dumping the guest's temp SEC/PEI RAM (32KB currently) while the guest was stuck in the loop. The dump includes one dword from before and after the temp SEC/PEI RAM: > $ virsh qemu-monitor-command GUEST_NAME --hmp 'xp /8194wx 0x80FFFC' > > 000000000080fffc: 0x00000000 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 > 000000000081000c: 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 > ... > 0000000000817fec: 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 0x5aa55aa5 > 0000000000817ffc: 0x5aa55aa5 0x00000000 Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=747 Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2017-11-08 20:32:30 +01:00
mov rdi, FixedPcdGet32 (PcdOvmfSecPeiTempRamBase) ; base address,
; relative to
; ES
mov rcx, FixedPcdGet32 (PcdOvmfSecPeiTempRamSize) / 8 ; qword count
cld ; store from base
; up
rep stosq
;
; Load temporary RAM stack based on PCDs
;
%define SEC_TOP_OF_STACK (FixedPcdGet32 (PcdOvmfSecPeiTempRamBase) + \
FixedPcdGet32 (PcdOvmfSecPeiTempRamSize))
mov rsp, SEC_TOP_OF_STACK
nop
;
; Setup parameters and call SecCoreStartupWithStack
; rcx: BootFirmwareVolumePtr
; rdx: TopOfCurrentStack
;
mov rcx, rbp
mov rdx, rsp
sub rsp, 0x20
call ASM_PFX(SecCoreStartupWithStack)