audk/NetworkPkg/IScsiDxe/IScsiExtScsiPassThru.c

/** @file
  The implementation of EFI_EXT_SCSI_PASS_THRU_PROTOCOL.

Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include "IScsiImpl.h"

EFI_EXT_SCSI_PASS_THRU_PROTOCOL gIScsiExtScsiPassThruProtocolTemplate = {
  NULL,
  IScsiExtScsiPassThruFunction,
  IScsiExtScsiPassThruGetNextTargetLun,
  IScsiExtScsiPassThruBuildDevicePath,
  IScsiExtScsiPassThruGetTargetLun,
  IScsiExtScsiPassThruResetChannel,
  IScsiExtScsiPassThruResetTargetLun,
  IScsiExtScsiPassThruGetNextTarget
};


/**
  Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel.
  This function supports both blocking I/O and nonblocking I/O. The blocking I/O
  functionality is required, and the nonblocking I/O functionality is optional.  

  @param[in]       This    A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
  @param[in]       Target  The Target is an array of size TARGET_MAX_BYTES and it
                           represents the id of the SCSI device to send the SCSI
                           Request Packet. Each transport driver may choose to
                           utilize a subset of this size to suit the needs
                           of transport target representation. For example, a 
                           Fibre Channel driver may use only 8 bytes (WWN)
                           to represent an FC target.
  @param[in]       Lun     The LUN of the SCSI device to send the SCSI Request Packet.
  @param[in, out]  Packet  A pointer to the SCSI Request Packet to send to the
                           SCSI device specified by Target and Lun.                  
  @param[in]       Event   If nonblocking I/O is not supported then Event is ignored,
                           and blocking I/O is performed. If Event is NULL, then
                           blocking I/O is performed. If Event is not NULL and non
                           blocking I/O is supported, then nonblocking I/O is performed,
                           and Event will be signaled when the SCSI Request Packet
                           completes.

  @retval EFI_SUCCESS           The SCSI Request Packet was sent by the host. For
                                bi-directional commands, InTransferLength bytes 
                                were transferred from InDataBuffer.
                                For write and bi-directional commands, OutTransferLength
                                bytes were transferred by OutDataBuffer.
  @retval EFI_BAD_BUFFER_SIZE   The SCSI Request Packet was not executed.
                                The number of bytes that could be transferred is
                                returned in InTransferLength. For write and
                                bi-directional commands, OutTransferLength bytes
                                were transferred by OutDataBuffer.
  @retval EFI_NOT_READY         The SCSI Request Packet could not be sent because
                                there are too many SCSI Request Packets already
                                queued. The caller may retry later.
  @retval EFI_DEVICE_ERROR      A device error occurred while attempting to send
                                the SCSI Request Packet.                                
  @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket,
                                are invalid.
  @retval EFI_UNSUPPORTED       The command described by the SCSI Request Packet
                                is not supported by the host adapter.
                                This includes the case of Bi-directional SCSI
                                commands not supported by the implementation.
                                The SCSI Request Packet was not sent,
                                so no additional status information is available.
  @retval EFI_TIMEOUT           A timeout occurred while waiting for the SCSI
                                Request Packet to execute.

**/
EFI_STATUS
EFIAPI
IScsiExtScsiPassThruFunction (
  IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL                          *This,
  IN UINT8                                                    *Target,
  IN UINT64                                                   Lun,
  IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET           *Packet,
  IN EFI_EVENT                                                Event     OPTIONAL
  )
{
  EFI_STATUS         Status;
  ISCSI_DRIVER_DATA  *Private;
  
  if (Target[0] != 0) {
    return EFI_INVALID_PARAMETER;
  }

  if ((Packet == NULL) || (Packet->Cdb == NULL)) {
    return EFI_INVALID_PARAMETER;
  }

  Status = IScsiExecuteScsiCommand (This, Target, Lun, Packet);
  if ((Status != EFI_SUCCESS) && (Status != EFI_NOT_READY)) {
    //
    // Try to reinstate the session and re-execute the Scsi command.
    //
    Private = ISCSI_DRIVER_DATA_FROM_EXT_SCSI_PASS_THRU (This);
    if (EFI_ERROR (IScsiSessionReinstatement (Private->Session))) {
      return EFI_DEVICE_ERROR;
    }

    Status = IScsiExecuteScsiCommand (This, Target, Lun, Packet);
  }

  return Status;
}


/**
  Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on
  a SCSI channel. These can either be the list SCSI devices that are actually
  present on the SCSI channel, or the list of legal Target Ids and LUNs for the
  SCSI channel. Regardless, the caller of this function must probe the Target ID      
  and LUN returned to see if a SCSI device is actually present at that location    
  on the SCSI channel. 

  @param[in]       This          The EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
  @param[in, out]  Target        On input, a pointer to the Target ID of a SCSI
                                 device present on the SCSI channel.  On output, a
                                 pointer to the Target ID of the next SCSI device
                                 present on a SCSI channel.  An input value of
                                 0xFFFFFFFF retrieves the Target ID of the first
                                 SCSI device present on a SCSI channel.
  @param[in, out]  Lun           On input, a pointer to the LUN of a SCSI device
                                 present on the SCSI channel. On output, a pointer
                                 to the LUN of the next SCSI device present on a
                                 SCSI channel.

  @retval EFI_SUCCESS            The Target ID and Lun of the next SCSI device on
                                 the SCSI channel was returned in Target and Lun.
  @retval EFI_NOT_FOUND          There are no more SCSI devices on this SCSI
                                 channel.
  @retval EFI_INVALID_PARAMETER  Target is not 0xFFFFFFFF,and Target and Lun were
                                 not returned on a previous call to
                                 GetNextDevice().

**/
EFI_STATUS
EFIAPI
IScsiExtScsiPassThruGetNextTargetLun (
  IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL  *This,
  IN OUT UINT8                        **Target,
  IN OUT UINT64                       *Lun
  )
{
  ISCSI_DRIVER_DATA           *Private;
  ISCSI_SESSION_CONFIG_NVDATA *ConfigNvData;
  UINT8                       TargetId[TARGET_MAX_BYTES];

  Private       = ISCSI_DRIVER_DATA_FROM_EXT_SCSI_PASS_THRU (This);
  ConfigNvData  = &Private->Session->ConfigData->SessionConfigData;

  if ((*Target)[0] == 0 && (CompareMem (Lun, ConfigNvData->BootLun, sizeof (UINT64)) == 0)) {
    //
    // Only one <Target, Lun> pair per iSCSI Driver instance.
    //
    return EFI_NOT_FOUND;
  }

  SetMem (TargetId, TARGET_MAX_BYTES, 0xFF);
  if (CompareMem (*Target, TargetId, TARGET_MAX_BYTES) == 0) {
    (*Target)[0] = 0;
    CopyMem (Lun, ConfigNvData->BootLun, sizeof (UINT64));

    return EFI_SUCCESS;
  }

  return EFI_INVALID_PARAMETER;
}


/**
  Allocate and build a device path node for a SCSI device on a SCSI channel.

  @param[in]       This          Protocol instance pointer.
  @param[in]       Target        The Target ID of the SCSI device for which a
                                 device path node is to be allocated and built.
  @param[in]       Lun           The LUN of the SCSI device for which a device
                                 path node is to be allocated and built.
  @param[in, out]  DevicePath    A pointer to a single device path node that
                                 describes the SCSI device specified by  Target and
                                 Lun. This function is responsible  for allocating
                                 the buffer DevicePath with the boot service
                                 AllocatePool().  It is the caller's
                                 responsibility to free DevicePath when the caller
                                 is finished with DevicePath.

  @retval EFI_SUCCESS            The device path node that describes the SCSI
                                 device specified by Target and Lun was allocated
                                 and  returned in DevicePath.
  @retval EFI_NOT_FOUND          The SCSI devices specified by Target and Lun does
                                 not exist on the SCSI channel.
  @retval EFI_INVALID_PARAMETER  DevicePath is NULL.
  @retval EFI_OUT_OF_RESOURCES   There are not enough resources to allocate
                                 DevicePath.

**/
EFI_STATUS
EFIAPI
IScsiExtScsiPassThruBuildDevicePath (
  IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL  *This,
  IN UINT8                            *Target,
  IN UINT64                           Lun,
  IN OUT EFI_DEVICE_PATH_PROTOCOL     **DevicePath
  )
{
  ISCSI_DRIVER_DATA             *Private;
  ISCSI_SESSION                 *Session;
  ISCSI_SESSION_CONFIG_NVDATA   *ConfigNvData;
  ISCSI_CHAP_AUTH_CONFIG_NVDATA *AuthConfig;
  EFI_DEV_PATH                  *Node;
  UINTN                         DevPathNodeLen;

  if ((DevicePath == NULL)) {
    return EFI_INVALID_PARAMETER;
  }

  if (Target[0] != 0) {
    return EFI_NOT_FOUND;
  }

  Private       = ISCSI_DRIVER_DATA_FROM_EXT_SCSI_PASS_THRU (This);
  Session       = Private->Session;
  ConfigNvData  = &Session->ConfigData->SessionConfigData;
  AuthConfig    = Session->AuthData.CHAP.AuthConfig;

  if (CompareMem (&Lun, ConfigNvData->BootLun, sizeof (UINT64)) != 0) {
    return EFI_NOT_FOUND;
  }

  DevPathNodeLen  = sizeof (ISCSI_DEVICE_PATH) + AsciiStrLen (ConfigNvData->TargetName) + 1;
  Node            = AllocateZeroPool (DevPathNodeLen);
  if (Node == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }

  Node->DevPath.Type    = MESSAGING_DEVICE_PATH;
  Node->DevPath.SubType = MSG_ISCSI_DP;
  SetDevicePathNodeLength (&Node->DevPath, DevPathNodeLen);

  //
  // 0 for TCP, others are reserved.
  //
  Node->Iscsi.NetworkProtocol = 0;

  Node->Iscsi.LoginOption     = 0;

  switch (Session->AuthType) {
  case ISCSI_AUTH_TYPE_NONE:
    Node->Iscsi.LoginOption |= 0x0800;
    break;

  case ISCSI_AUTH_TYPE_CHAP:
    //
    // Bit12: 0=CHAP_BI, 1=CHAP_UNI
    //
    if (AuthConfig->CHAPType == ISCSI_CHAP_UNI) {
      Node->Iscsi.LoginOption |= 0x1000;
    }
    break;

  default:
    break;
  }

  CopyMem (&Node->Iscsi.Lun, ConfigNvData->BootLun, sizeof (UINT64));
  Node->Iscsi.TargetPortalGroupTag = Session->TargetPortalGroupTag;
  AsciiStrCpy ((CHAR8 *) Node + sizeof (ISCSI_DEVICE_PATH), ConfigNvData->TargetName);

  *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) Node;

  return EFI_SUCCESS;
}


/**
  Translate a device path node to a Target ID and LUN.

  @param[in]   This              Protocol instance pointer.
  @param[in]   DevicePath        A pointer to the device path node that  describes
                                 a SCSI device on the SCSI channel.
  @param[out]  Target            A pointer to the Target ID of a SCSI device on
                                 the SCSI channel.
  @param[out]  Lun               A pointer to the LUN of a SCSI device on the SCSI
                                 channel.

  @retval EFI_SUCCESS            DevicePath was successfully translated to a
                                 Target ID and LUN, and they were returned  in
                                 Target and Lun.
  @retval EFI_INVALID_PARAMETER  DevicePath/Target/Lun is NULL.
  @retval EFI_UNSUPPORTED        This driver does not support the device path  node
                                 type in DevicePath.
  @retval EFI_NOT_FOUND          A valid translation does not exist from DevicePath 
                                 to a TargetID and LUN.

**/
EFI_STATUS
EFIAPI
IScsiExtScsiPassThruGetTargetLun (
  IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL  *This,
  IN EFI_DEVICE_PATH_PROTOCOL         *DevicePath,
  OUT UINT8                           **Target,
  OUT UINT64                          *Lun
  )
{
  ISCSI_DRIVER_DATA           *Private;
  ISCSI_SESSION_CONFIG_NVDATA *ConfigNvData;

  if ((DevicePath == NULL) || (Target == NULL) || (Lun == NULL)) {
    return EFI_INVALID_PARAMETER;
  }

  if ((DevicePath->Type != MESSAGING_DEVICE_PATH) ||
      (DevicePath->SubType != MSG_ISCSI_DP) ||
      (DevicePathNodeLength (DevicePath) <= sizeof (ISCSI_DEVICE_PATH))
      ) {
    return EFI_UNSUPPORTED;
  }

  Private       = ISCSI_DRIVER_DATA_FROM_EXT_SCSI_PASS_THRU (This);
  ConfigNvData  = &Private->Session->ConfigData->SessionConfigData;

  SetMem (*Target, TARGET_MAX_BYTES, 0xFF);
  (*Target)[0] = 0;

  if (AsciiStrCmp (ConfigNvData->TargetName, (CHAR8 *) DevicePath + sizeof (ISCSI_DEVICE_PATH)) != 0) {
    return EFI_UNSUPPORTED;
  }

  CopyMem (Lun, ConfigNvData->BootLun, sizeof (UINT64));

  return EFI_SUCCESS;
}


/**
  Resets a SCSI channel. This operation resets all the SCSI devices connected to
  the SCSI channel.

  @param[in]  This               Protocol instance pointer.

  @retval EFI_UNSUPPORTED        It is not supported.

**/
EFI_STATUS
EFIAPI
IScsiExtScsiPassThruResetChannel (
  IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL  *This
  )
{
  return EFI_UNSUPPORTED;
}


/**
  Resets a SCSI device that is connected to a SCSI channel.

  @param[in]  This               Protocol instance pointer.
  @param[in]  Target             The Target ID of the SCSI device to reset.
  @param[in]  Lun                The LUN of the SCSI device to reset.

  @retval EFI_UNSUPPORTED        It is not supported.

**/
EFI_STATUS
EFIAPI
IScsiExtScsiPassThruResetTargetLun (
  IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL  *This,
  IN UINT8                            *Target,
  IN UINT64                           Lun
  )
{
  return EFI_UNSUPPORTED;
}

/**
  Retrieve the list of legal Target IDs for SCSI devices on a SCSI channel.                         

  @param[in]       This         A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL
                                instance.
  @param[in, out]  Target       (TARGET_MAX_BYTES) of a SCSI device present on
                                the SCSI channel. On output, a pointer to the
                                Target ID (an array of TARGET_MAX_BYTES) of the
                                next SCSI device present on a SCSI channel.
                                An input value of 0xF(all bytes in the array are 0xF)
                                in the Target array retrieves the Target ID of the
                                first SCSI device present on a SCSI channel.                 

  @retval EFI_SUCCESS           The Target ID of the next SCSI device on the SCSI
                                channel was returned in Target.
  @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
  @retval EFI_TIMEOUT           Target array is not all 0xF, and Target was not
                                returned on a previous call to GetNextTarget().
  @retval EFI_NOT_FOUND         There are no more SCSI devices on this SCSI channel.

**/
EFI_STATUS
EFIAPI
IScsiExtScsiPassThruGetNextTarget (
  IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL  *This,
  IN OUT UINT8                        **Target
  )
{
  UINT8 TargetId[TARGET_MAX_BYTES];

  SetMem (TargetId, TARGET_MAX_BYTES, 0xFF);

  if (CompareMem (*Target, TargetId, TARGET_MAX_BYTES) == 0) {
    (*Target)[0] = 0;
    return EFI_SUCCESS;
  } else if ((*Target)[0] == 0) {
    return EFI_NOT_FOUND;
  } else {
    return EFI_INVALID_PARAMETER;
  }
}