audk/Vlv2TbltDevicePkg/Include/Platform.h

/*++

  Copyright (c) 2004  - 2014, Intel Corporation. All rights reserved.<BR>
                                                                                   
  SPDX-License-Identifier: BSD-2-Clause-Patent

                                                                                   


Module Name:

  Platform.h

Abstract:

  Pinetrail platform specific information.

**/

#ifndef _PLATFORM_H
#define _PLATFORM_H

#include "ChipsetAccess.h"
#include "PlatformBaseAddresses.h"


//
// Number of P & T states supported.
//
#define NPTM_P_STATES_SUPPORTED         16
#define NPTM_T_STATES_SUPPORTED         8

//
// I/O APIC IDs, the code uses math to generate the numbers
// instead of using these defines.
//
#define ICH_IOAPIC                     (1 << 0)
#define ICH_IOAPIC_ID                   0x08

//
// Possible SMBus addresses that will be present.
//
#define SMBUS_ADDR_CH_A_1     0xA0
#define SMBUS_ADDR_CH_A_2     0xA2
#define SMBUS_ADDR_CH_B_1     0xA4
#define SMBUS_ADDR_CH_B_2     0xA6
#define SMBUS_ADDR_CH_C_1     0xA8
#define SMBUS_ADDR_CH_C_2     0xAA
#define SMBUS_ADDR_CH_D_1     0xAC
#define SMBUS_ADDR_CH_D_2     0xAE
#define SMBUS_ADDR_HOST_CLK_BUFFER  0xDC
#define SMBUS_ADDR_ICH_SLAVE        0x44
#define SMBUS_ADDR_HECETA     0x5C
#define SMBUS_ADDR_SMBARP     0xC2
#define SMBUS_ADDR_82573E     0xC6
#define SMBUS_ADDR_CLKCHIP    0xD2
#define SMBUS_ADDR_BRD_REV          0x4E
#define SMBUS_ADDR_DB803            0x82

//
// SMBus addresses that used on this platform.
//
#define PLATFORM_SMBUS_RSVD_ADDRESSES { \
  SMBUS_ADDR_CH_A_1, \
  SMBUS_ADDR_CH_A_2, \
  SMBUS_ADDR_HOST_CLK_BUFFER, \
  SMBUS_ADDR_ICH_SLAVE, \
  SMBUS_ADDR_SMBARP, \
  SMBUS_ADDR_CLKCHIP, \
  SMBUS_ADDR_BRD_REV, \
  SMBUS_ADDR_DB803 \
  }

//
// Count of addresses present in PLATFORM_SMBUS_RSVD_ADDRESSES.
//
#define PLATFORM_NUM_SMBUS_RSVD_ADDRESSES 8

//
// CMOS usage
//
#define CMOS_CPU_BSP_SELECT         0x10
#define CMOS_CPU_UP_MODE            0x11
#define CMOS_CPU_RATIO_OFFSET       0x12
#define CMOS_CPU_CORE_HT_OFFSET     0x13
#define CMOS_EFI_DEBUG              0x14
#define CMOS_CPU_BIST_OFFSET        0x15
#define CMOS_CPU_VMX_OFFSET         0x16
#define CMOS_ICH_PORT80_OFFSET      0x17
#define CMOS_PLATFORM_DESIGNATOR    0x18      // Second bank CMOS location of Platform ID.
#define CMOS_VALIDATION_TEST_BYTE   0x19      // BIT0 - Validation mailbox for UPonDP.
#define CMOS_SERIAL_BAUD_RATE       0x1A      // 0=115200; 1=57600; 2=38400; 3=19200; 4=9600
#define CMOS_DCU_MODE_OFFSET        0x1B
#define CMOS_VR11_SET_OFFSET        0x1C
#define CMOS_SBSP_TO_AP_COMM        0x20      // SEC code use ONLY!!!
#define CMOS_RESET_TYPE_BY_OS       0x52
#define TCG_CMOS_MOR_AREA_OFFSET    0x65      // Also Change in Universal\Security\Tpm\PhysicalPresence\Dxe\PhysicalPresence.c &
#define CMOS_S4_WAKEUP_FLAG_ADDRESS 0x6E
#define ACPI_TPM_REQUEST            0x75
#define ACPI_TPM_LAST_REQUEST       0x76
#define CMOS_BOOT_FLAG_ADDRESS      0x7E

//
// GPIO Index Data Structure.
//
typedef struct {
  UINT8   Register;
  UINT32  Value;
} ICH_GPIO_DEV;

//
// CPU Equates
//
#define MAX_THREAD                      2
#define MAX_CORE                        1
#define MAX_DIE                         2
#define MAX_CPU_SOCKET                  1
#define MAX_CPU_NUM                     (MAX_THREAD * MAX_CORE * MAX_DIE * MAX_CPU_SOCKET)

#define MEM64_LEN                       0x00100000000
#define RES_MEM64_36_BASE               0x01000000000 - MEM64_LEN   // 2^36
#define RES_MEM64_36_LIMIT              0x01000000000 - 1           // 2^36
#define RES_MEM64_39_BASE               0x08000000000 - MEM64_LEN   // 2^39
#define RES_MEM64_39_LIMIT              0x08000000000 - 1           // 2^39
#define RES_MEM64_40_BASE               0x10000000000 - MEM64_LEN   // 2^40
#define RES_MEM64_40_LIMIT              0x10000000000 - 1           // 2^40

#define PLATFORM_MAX_BUS_NUM             0x3f
#define V_DEFAULT_SUBSYSTEM_DEVICE_ID    0x574d
#define V_DEFAULT_SUBSYSTEM_DEVICE_ID_KT 0x544b
#define V_DEFAULT_SUBSYSTEM_VENDOR_ID    0x8086

#endif