audk/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h

816 lines
24 KiB
C
Raw Normal View History

/** @file
Header file for Registers and Structure definitions
Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __OPAL_PASSWORD_NVME_REG_H__
#define __OPAL_PASSWORD_NVME_REG_H__
//
// PCI Header for PCIe root port configuration
//
#define NVME_PCIE_PCICMD 0x04
#define NVME_PCIE_BNUM 0x18
#define NVME_PCIE_SEC_BNUM 0x19
#define NVME_PCIE_IOBL 0x1C
#define NVME_PCIE_MBL 0x20
#define NVME_PCIE_PMBL 0x24
#define NVME_PCIE_PMBU32 0x28
#define NVME_PCIE_PMLU32 0x2C
#define NVME_PCIE_INTR 0x3C
//
// NVMe related definitions
//
#define PCI_CLASS_MASS_STORAGE_NVM 0x08 // mass storage sub-class non-volatile memory.
#define PCI_IF_NVMHCI 0x02 // mass storage programming interface NVMHCI.
#define NVME_ASQ_SIZE 1 // Number of admin submission queue entries, which is 0-based
#define NVME_ACQ_SIZE 1 // Number of admin completion queue entries, which is 0-based
#define NVME_CSQ_SIZE 63 // Number of I/O submission queue entries, which is 0-based
#define NVME_CCQ_SIZE 63 // Number of I/O completion queue entries, which is 0-based
#define NVME_MAX_IO_QUEUES 2 // Number of I/O queues supported by the driver, 1 for AQ, 1 for CQ
#define NVME_CSQ_DEPTH (NVME_CSQ_SIZE+1)
#define NVME_CCQ_DEPTH (NVME_CCQ_SIZE+1)
#define NVME_PRP_SIZE (4) // Pages of PRP list
#define NVME_CONTROLLER_ID 0
//
// Time out Value for Nvme transaction execution
//
#define NVME_GENERIC_TIMEOUT 5000000 ///< us
#define NVME_CMD_WAIT 100 ///< us
#define NVME_CMD_TIMEOUT 20000000 ///< us
#define NVME_MEM_MAX_SIZE \
(( \
1 /* Controller Data */ + \
1 /* Identify Data */ + \
1 /* ASQ */ + \
1 /* ACQ */ + \
1 /* SQs */ + \
1 /* CQs */ + \
NVME_PRP_SIZE * NVME_CSQ_DEPTH /* PRPs */ + \
1 /* SECURITY */ \
) * EFI_PAGE_SIZE)
//
// controller register offsets
//
#define NVME_CAP_OFFSET 0x0000 // Controller Capabilities
#define NVME_VER_OFFSET 0x0008 // Version
#define NVME_INTMS_OFFSET 0x000c // Interrupt Mask Set
#define NVME_INTMC_OFFSET 0x0010 // Interrupt Mask Clear
#define NVME_CC_OFFSET 0x0014 // Controller Configuration
#define NVME_CSTS_OFFSET 0x001c // Controller Status
#define NVME_AQA_OFFSET 0x0024 // Admin Queue Attributes
#define NVME_ASQ_OFFSET 0x0028 // Admin Submission Queue Base Address
#define NVME_ACQ_OFFSET 0x0030 // Admin Completion Queue Base Address
#define NVME_SQ0_OFFSET 0x1000 // Submission Queue 0 (admin) Tail Doorbell
#define NVME_CQ0_OFFSET 0x1004 // Completion Queue 0 (admin) Head Doorbell
//
// These register offsets are defined as 0x1000 + (N * (4 << CAP.DSTRD))
// Get the doorbell stride bit shift Value from the controller capabilities.
//
#define NVME_SQTDBL_OFFSET(QID, DSTRD) 0x1000 + ((2 * (QID)) * (4 << (DSTRD))) // Submission Queue y (NVM) Tail Doorbell
#define NVME_CQHDBL_OFFSET(QID, DSTRD) 0x1000 + (((2 * (QID)) + 1) * (4 << (DSTRD))) // Completion Queue y (NVM) Head Doorbell
#pragma pack(1)
//
// 3.1.1 Offset 00h: CAP - Controller Capabilities
//
typedef struct {
UINT16 Mqes; // Maximum Queue Entries Supported
UINT8 Cqr:1; // Contiguous Queues Required
UINT8 Ams:2; // Arbitration Mechanism Supported
UINT8 Rsvd1:5;
UINT8 To; // Timeout
UINT16 Dstrd:4;
UINT16 Rsvd2:1;
UINT16 Css:4; // Command Sets Supported
UINT16 Rsvd3:7;
UINT8 Mpsmin:4;
UINT8 Mpsmax:4;
UINT8 Rsvd4;
} NVME_CAP;
//
// 3.1.2 Offset 08h: VS - Version
//
typedef struct {
UINT16 Mnr; // Minor version number
UINT16 Mjr; // Major version number
} NVME_VER;
//
// 3.1.5 Offset 14h: CC - Controller Configuration
//
typedef struct {
UINT16 En:1; // Enable
UINT16 Rsvd1:3;
UINT16 Css:3; // Command Set Selected
UINT16 Mps:4; // Memory Page Size
UINT16 Ams:3; // Arbitration Mechanism Selected
UINT16 Shn:2; // Shutdown Notification
UINT8 Iosqes:4; // I/O Submission Queue Entry Size
UINT8 Iocqes:4; // I/O Completion Queue Entry Size
UINT8 Rsvd2;
} NVME_CC;
//
// 3.1.6 Offset 1Ch: CSTS - Controller Status
//
typedef struct {
UINT32 Rdy:1; // Ready
UINT32 Cfs:1; // Controller Fatal Status
UINT32 Shst:2; // Shutdown Status
UINT32 Nssro:1; // NVM Subsystem Reset Occurred
UINT32 Rsvd1:27;
} NVME_CSTS;
//
// 3.1.8 Offset 24h: AQA - Admin Queue Attributes
//
typedef struct {
UINT16 Asqs:12; // Submission Queue Size
UINT16 Rsvd1:4;
UINT16 Acqs:12; // Completion Queue Size
UINT16 Rsvd2:4;
} NVME_AQA;
//
// 3.1.9 Offset 28h: ASQ - Admin Submission Queue Base Address
//
#define NVME_ASQ UINT64
//
// 3.1.10 Offset 30h: ACQ - Admin Completion Queue Base Address
//
#define NVME_ACQ UINT64
//
// 3.1.11 Offset (1000h + ((2y) * (4 << CAP.DSTRD))): SQyTDBL - Submission Queue y Tail Doorbell
//
typedef struct {
UINT16 Sqt;
UINT16 Rsvd1;
} NVME_SQTDBL;
//
// 3.1.12 Offset (1000h + ((2y + 1) * (4 << CAP.DSTRD))): CQyHDBL - Completion Queue y Head Doorbell
//
typedef struct {
UINT16 Cqh;
UINT16 Rsvd1;
} NVME_CQHDBL;
//
// NVM command set structures
//
// Read Command
//
typedef struct {
//
// CDW 10, 11
//
UINT64 Slba; /* Starting Sector Address */
//
// CDW 12
//
UINT16 Nlb; /* Number of Sectors */
UINT16 Rsvd1:10;
UINT16 Prinfo:4; /* Protection Info Check */
UINT16 Fua:1; /* Force Unit Access */
UINT16 Lr:1; /* Limited Retry */
//
// CDW 13
//
UINT32 Af:4; /* Access Frequency */
UINT32 Al:2; /* Access Latency */
UINT32 Sr:1; /* Sequential Request */
UINT32 In:1; /* Incompressible */
UINT32 Rsvd2:24;
//
// CDW 14
//
UINT32 Eilbrt; /* Expected Initial Logical Block Reference Tag */
//
// CDW 15
//
UINT16 Elbat; /* Expected Logical Block Application Tag */
UINT16 Elbatm; /* Expected Logical Block Application Tag Mask */
} NVME_READ;
//
// Write Command
//
typedef struct {
//
// CDW 10, 11
//
UINT64 Slba; /* Starting Sector Address */
//
// CDW 12
//
UINT16 Nlb; /* Number of Sectors */
UINT16 Rsvd1:10;
UINT16 Prinfo:4; /* Protection Info Check */
UINT16 Fua:1; /* Force Unit Access */
UINT16 Lr:1; /* Limited Retry */
//
// CDW 13
//
UINT32 Af:4; /* Access Frequency */
UINT32 Al:2; /* Access Latency */
UINT32 Sr:1; /* Sequential Request */
UINT32 In:1; /* Incompressible */
UINT32 Rsvd2:24;
//
// CDW 14
//
UINT32 Ilbrt; /* Initial Logical Block Reference Tag */
//
// CDW 15
//
UINT16 Lbat; /* Logical Block Application Tag */
UINT16 Lbatm; /* Logical Block Application Tag Mask */
} NVME_WRITE;
//
// Flush
//
typedef struct {
//
// CDW 10
//
UINT32 Flush; /* Flush */
} NVME_FLUSH;
//
// Write Uncorrectable command
//
typedef struct {
//
// CDW 10, 11
//
UINT64 Slba; /* Starting LBA */
//
// CDW 12
//
UINT32 Nlb:16; /* Number of Logical Blocks */
UINT32 Rsvd1:16;
} NVME_WRITE_UNCORRECTABLE;
//
// Write Zeroes command
//
typedef struct {
//
// CDW 10, 11
//
UINT64 Slba; /* Starting LBA */
//
// CDW 12
//
UINT16 Nlb; /* Number of Logical Blocks */
UINT16 Rsvd1:10;
UINT16 Prinfo:4; /* Protection Info Check */
UINT16 Fua:1; /* Force Unit Access */
UINT16 Lr:1; /* Limited Retry */
//
// CDW 13
//
UINT32 Rsvd2;
//
// CDW 14
//
UINT32 Ilbrt; /* Initial Logical Block Reference Tag */
//
// CDW 15
//
UINT16 Lbat; /* Logical Block Application Tag */
UINT16 Lbatm; /* Logical Block Application Tag Mask */
} NVME_WRITE_ZEROES;
//
// Compare command
//
typedef struct {
//
// CDW 10, 11
//
UINT64 Slba; /* Starting LBA */
//
// CDW 12
//
UINT16 Nlb; /* Number of Logical Blocks */
UINT16 Rsvd1:10;
UINT16 Prinfo:4; /* Protection Info Check */
UINT16 Fua:1; /* Force Unit Access */
UINT16 Lr:1; /* Limited Retry */
//
// CDW 13
//
UINT32 Rsvd2;
//
// CDW 14
//
UINT32 Eilbrt; /* Expected Initial Logical Block Reference Tag */
//
// CDW 15
//
UINT16 Elbat; /* Expected Logical Block Application Tag */
UINT16 Elbatm; /* Expected Logical Block Application Tag Mask */
} NVME_COMPARE;
typedef union {
NVME_READ Read;
NVME_WRITE Write;
NVME_FLUSH Flush;
NVME_WRITE_UNCORRECTABLE WriteUncorrectable;
NVME_WRITE_ZEROES WriteZeros;
NVME_COMPARE Compare;
} NVME_CMD;
typedef struct {
UINT16 Mp; /* Maximum Power */
UINT8 Rsvd1; /* Reserved as of Nvm Express 1.1 Spec */
UINT8 Mps:1; /* Max Power Scale */
UINT8 Nops:1; /* Non-Operational State */
UINT8 Rsvd2:6; /* Reserved as of Nvm Express 1.1 Spec */
UINT32 Enlat; /* Entry Latency */
UINT32 Exlat; /* Exit Latency */
UINT8 Rrt:5; /* Relative Read Throughput */
UINT8 Rsvd3:3; /* Reserved as of Nvm Express 1.1 Spec */
UINT8 Rrl:5; /* Relative Read Leatency */
UINT8 Rsvd4:3; /* Reserved as of Nvm Express 1.1 Spec */
UINT8 Rwt:5; /* Relative Write Throughput */
UINT8 Rsvd5:3; /* Reserved as of Nvm Express 1.1 Spec */
UINT8 Rwl:5; /* Relative Write Leatency */
UINT8 Rsvd6:3; /* Reserved as of Nvm Express 1.1 Spec */
UINT8 Rsvd7[16]; /* Reserved as of Nvm Express 1.1 Spec */
} NVME_PSDESCRIPTOR;
//
// Identify Controller Data
//
typedef struct {
//
// Controller Capabilities and Features 0-255
//
UINT16 Vid; /* PCI Vendor ID */
UINT16 Ssvid; /* PCI sub-system vendor ID */
UINT8 Sn[20]; /* Produce serial number */
UINT8 Mn[40]; /* Proeduct model number */
UINT8 Fr[8]; /* Firmware Revision */
UINT8 Rab; /* Recommended Arbitration Burst */
UINT8 Ieee_oiu[3]; /* Organization Unique Identifier */
UINT8 Cmic; /* Multi-interface Capabilities */
UINT8 Mdts; /* Maximum Data Transfer Size */
UINT8 Cntlid[2]; /* Controller ID */
UINT8 Rsvd1[176]; /* Reserved as of Nvm Express 1.1 Spec */
//
// Admin Command Set Attributes
//
UINT16 Oacs; /* Optional Admin Command Support */
UINT8 Acl; /* Abort Command Limit */
UINT8 Aerl; /* Async Event Request Limit */
UINT8 Frmw; /* Firmware updates */
UINT8 Lpa; /* Log Page Attributes */
UINT8 Elpe; /* Error Log Page Entries */
UINT8 Npss; /* Number of Power States Support */
UINT8 Avscc; /* Admin Vendor Specific Command Configuration */
UINT8 Apsta; /* Autonomous Power State Transition Attributes */
UINT8 Rsvd2[246]; /* Reserved as of Nvm Express 1.1 Spec */
//
// NVM Command Set Attributes
//
UINT8 Sqes; /* Submission Queue Entry Size */
UINT8 Cqes; /* Completion Queue Entry Size */
UINT16 Rsvd3; /* Reserved as of Nvm Express 1.1 Spec */
UINT32 Nn; /* Number of Namespaces */
UINT16 Oncs; /* Optional NVM Command Support */
UINT16 Fuses; /* Fused Operation Support */
UINT8 Fna; /* Format NVM Attributes */
UINT8 Vwc; /* Volatile Write Cache */
UINT16 Awun; /* Atomic Write Unit Normal */
UINT16 Awupf; /* Atomic Write Unit Power Fail */
UINT8 Nvscc; /* NVM Vendor Specific Command Configuration */
UINT8 Rsvd4; /* Reserved as of Nvm Express 1.1 Spec */
UINT16 Acwu; /* Atomic Compare & Write Unit */
UINT16 Rsvd5; /* Reserved as of Nvm Express 1.1 Spec */
UINT32 Sgls; /* SGL Support */
UINT8 Rsvd6[164]; /* Reserved as of Nvm Express 1.1 Spec */
//
// I/O Command set Attributes
//
UINT8 Rsvd7[1344]; /* Reserved as of Nvm Express 1.1 Spec */
//
// Power State Descriptors
//
NVME_PSDESCRIPTOR PsDescriptor[32];
UINT8 VendorData[1024]; /* Vendor specific Data */
} NVME_ADMIN_CONTROLLER_DATA;
typedef struct {
UINT16 Security : 1; /* supports security send/receive commands */
UINT16 Format : 1; /* supports format nvm command */
UINT16 Firmware : 1; /* supports firmware activate/download commands */
UINT16 Oacs_rsvd : 13;
} OACS; // optional admin command support: NVME_ADMIN_CONTROLLER_DATA.Oacs
typedef struct {
UINT16 Ms; /* Metadata Size */
UINT8 Lbads; /* LBA Data Size */
UINT8 Rp:2; /* Relative Performance */
#define LBAF_RP_BEST 00b
#define LBAF_RP_BETTER 01b
#define LBAF_RP_GOOD 10b
#define LBAF_RP_DEGRADED 11b
UINT8 Rsvd1:6; /* Reserved as of Nvm Express 1.1 Spec */
} NVME_LBAFORMAT;
//
// Identify Namespace Data
//
typedef struct {
//
// NVM Command Set Specific
//
UINT64 Nsze; /* Namespace Size (total number of blocks in formatted namespace) */
UINT64 Ncap; /* Namespace Capacity (max number of logical blocks) */
UINT64 Nuse; /* Namespace Utilization */
UINT8 Nsfeat; /* Namespace Features */
UINT8 Nlbaf; /* Number of LBA Formats */
UINT8 Flbas; /* Formatted LBA Size */
UINT8 Mc; /* Metadata Capabilities */
UINT8 Dpc; /* End-to-end Data Protection capabilities */
UINT8 Dps; /* End-to-end Data Protection Type Settings */
UINT8 Nmic; /* Namespace Multi-path I/O and Namespace Sharing Capabilities */
UINT8 Rescap; /* Reservation Capabilities */
UINT8 Rsvd1[88]; /* Reserved as of Nvm Express 1.1 Spec */
UINT64 Eui64; /* IEEE Extended Unique Identifier */
//
// LBA Format
//
NVME_LBAFORMAT LbaFormat[16];
UINT8 Rsvd2[192]; /* Reserved as of Nvm Express 1.1 Spec */
UINT8 VendorData[3712]; /* Vendor specific Data */
} NVME_ADMIN_NAMESPACE_DATA;
//
// NvmExpress Admin Identify Cmd
//
typedef struct {
//
// CDW 10
//
UINT32 Cns:2;
UINT32 Rsvd1:30;
} NVME_ADMIN_IDENTIFY;
//
// NvmExpress Admin Create I/O Completion Queue
//
typedef struct {
//
// CDW 10
//
UINT32 Qid:16; /* Queue Identifier */
UINT32 Qsize:16; /* Queue Size */
//
// CDW 11
//
UINT32 Pc:1; /* Physically Contiguous */
UINT32 Ien:1; /* Interrupts Enabled */
UINT32 Rsvd1:14; /* reserved as of Nvm Express 1.1 Spec */
UINT32 Iv:16; /* Interrupt Vector */
} NVME_ADMIN_CRIOCQ;
//
// NvmExpress Admin Create I/O Submission Queue
//
typedef struct {
//
// CDW 10
//
UINT32 Qid:16; /* Queue Identifier */
UINT32 Qsize:16; /* Queue Size */
//
// CDW 11
//
UINT32 Pc:1; /* Physically Contiguous */
UINT32 Qprio:2; /* Queue Priority */
UINT32 Rsvd1:13; /* Reserved as of Nvm Express 1.1 Spec */
UINT32 Cqid:16; /* Completion Queue ID */
} NVME_ADMIN_CRIOSQ;
//
// NvmExpress Admin Delete I/O Completion Queue
//
typedef struct {
//
// CDW 10
//
UINT16 Qid;
UINT16 Rsvd1;
} NVME_ADMIN_DEIOCQ;
//
// NvmExpress Admin Delete I/O Submission Queue
//
typedef struct {
//
// CDW 10
//
UINT16 Qid;
UINT16 Rsvd1;
} NVME_ADMIN_DEIOSQ;
//
// NvmExpress Admin Security Send
//
typedef struct {
//
// CDW 10
//
UINT32 Resv:8; /* Reserve */
UINT32 Spsp:16; /* SP Specific */
UINT32 Secp:8; /* Security Protocol */
//
// CDW 11
//
UINT32 Tl; /* Transfer Length */
} NVME_ADMIN_SECSEND;
//
// NvmExpress Admin Abort Command
//
typedef struct {
//
// CDW 10
//
UINT32 Sqid:16; /* Submission Queue identifier */
UINT32 Cid:16; /* Command Identifier */
} NVME_ADMIN_ABORT;
//
// NvmExpress Admin Firmware Activate Command
//
typedef struct {
//
// CDW 10
//
UINT32 Fs:3; /* Submission Queue identifier */
UINT32 Aa:2; /* Command Identifier */
UINT32 Rsvd1:27;
} NVME_ADMIN_FIRMWARE_ACTIVATE;
//
// NvmExpress Admin Firmware Image Download Command
//
typedef struct {
//
// CDW 10
//
UINT32 Numd; /* Number of Dwords */
//
// CDW 11
//
UINT32 Ofst; /* Offset */
} NVME_ADMIN_FIRMWARE_IMAGE_DOWNLOAD;
//
// NvmExpress Admin Get Features Command
//
typedef struct {
//
// CDW 10
//
UINT32 Fid:8; /* Feature Identifier */
UINT32 Sel:3; /* Select */
UINT32 Rsvd1:21;
} NVME_ADMIN_GET_FEATURES;
//
// NvmExpress Admin Get Log Page Command
//
typedef struct {
//
// CDW 10
//
UINT32 Lid:8; /* Log Page Identifier */
#define LID_ERROR_INFO
#define LID_SMART_INFO
#define LID_FW_SLOT_INFO
UINT32 Rsvd1:8;
UINT32 Numd:12; /* Number of Dwords */
UINT32 Rsvd2:4; /* Reserved as of Nvm Express 1.1 Spec */
} NVME_ADMIN_GET_LOG_PAGE;
//
// NvmExpress Admin Set Features Command
//
typedef struct {
//
// CDW 10
//
UINT32 Fid:8; /* Feature Identifier */
UINT32 Rsvd1:23;
UINT32 Sv:1; /* Save */
} NVME_ADMIN_SET_FEATURES;
//
// NvmExpress Admin Format NVM Command
//
typedef struct {
//
// CDW 10
//
UINT32 Lbaf:4; /* LBA Format */
UINT32 Ms:1; /* Metadata Settings */
UINT32 Pi:3; /* Protection Information */
UINT32 Pil:1; /* Protection Information Location */
UINT32 Ses:3; /* Secure Erase Settings */
UINT32 Rsvd1:20;
} NVME_ADMIN_FORMAT_NVM;
//
// NvmExpress Admin Security Receive Command
//
typedef struct {
//
// CDW 10
//
UINT32 Rsvd1:8;
UINT32 Spsp:16; /* SP Specific */
UINT32 Secp:8; /* Security Protocol */
//
// CDW 11
//
UINT32 Al; /* Allocation Length */
} NVME_ADMIN_SECURITY_RECEIVE;
//
// NvmExpress Admin Security Send Command
//
typedef struct {
//
// CDW 10
//
UINT32 Rsvd1:8;
UINT32 Spsp:16; /* SP Specific */
UINT32 Secp:8; /* Security Protocol */
//
// CDW 11
//
UINT32 Tl; /* Transfer Length */
} NVME_ADMIN_SECURITY_SEND;
typedef union {
NVME_ADMIN_IDENTIFY Identify;
NVME_ADMIN_CRIOCQ CrIoCq;
NVME_ADMIN_CRIOSQ CrIoSq;
NVME_ADMIN_DEIOCQ DeIoCq;
NVME_ADMIN_DEIOSQ DeIoSq;
NVME_ADMIN_ABORT Abort;
NVME_ADMIN_FIRMWARE_ACTIVATE Activate;
NVME_ADMIN_FIRMWARE_IMAGE_DOWNLOAD FirmwareImageDownload;
NVME_ADMIN_GET_FEATURES GetFeatures;
NVME_ADMIN_GET_LOG_PAGE GetLogPage;
NVME_ADMIN_SET_FEATURES SetFeatures;
NVME_ADMIN_FORMAT_NVM FormatNvm;
NVME_ADMIN_SECURITY_RECEIVE SecurityReceive;
NVME_ADMIN_SECURITY_SEND SecuritySend;
} NVME_ADMIN_CMD;
typedef struct {
UINT32 Cdw10;
UINT32 Cdw11;
UINT32 Cdw12;
UINT32 Cdw13;
UINT32 Cdw14;
UINT32 Cdw15;
} NVME_RAW;
typedef union {
NVME_ADMIN_CMD Admin; // Union of Admin commands
NVME_CMD Nvm; // Union of Nvm commands
NVME_RAW Raw;
} NVME_PAYLOAD;
//
// Submission Queue
//
typedef struct {
//
// CDW 0, Common to all comnmands
//
UINT8 Opc; // Opcode
UINT8 Fuse:2; // Fused Operation
UINT8 Rsvd1:5;
UINT8 Psdt:1; // PRP or SGL for Data Transfer
UINT16 Cid; // Command Identifier
//
// CDW 1
//
UINT32 Nsid; // Namespace Identifier
//
// CDW 2,3
//
UINT64 Rsvd2;
//
// CDW 4,5
//
UINT64 Mptr; // Metadata Pointer
//
// CDW 6-9
//
UINT64 Prp[2]; // First and second PRP entries
NVME_PAYLOAD Payload;
} NVME_SQ;
//
// Completion Queue
//
typedef struct {
//
// CDW 0
//
UINT32 Dword0;
//
// CDW 1
//
UINT32 Rsvd1;
//
// CDW 2
//
UINT16 Sqhd; // Submission Queue Head Pointer
UINT16 Sqid; // Submission Queue Identifier
//
// CDW 3
//
UINT16 Cid; // Command Identifier
UINT16 Pt:1; // Phase Tag
UINT16 Sc:8; // Status Code
UINT16 Sct:3; // Status Code Type
UINT16 Rsvd2:2;
UINT16 Mo:1; // More
UINT16 Dnr:1; // Retry
} NVME_CQ;
//
// Nvm Express Admin cmd opcodes
//
#define NVME_ADMIN_DELIOSQ_OPC 0
#define NVME_ADMIN_CRIOSQ_OPC 1
#define NVME_ADMIN_DELIOCQ_OPC 4
#define NVME_ADMIN_CRIOCQ_OPC 5
#define NVME_ADMIN_IDENTIFY_OPC 6
#define NVME_ADMIN_SECURITY_SEND_OPC 0x81
#define NVME_ADMIN_SECURITY_RECV_OPC 0x82
#define NVME_IO_FLUSH_OPC 0
#define NVME_IO_WRITE_OPC 1
#define NVME_IO_READ_OPC 2
//
// Offset from the beginning of private Data queue Buffer
//
#define NVME_ASQ_BUF_OFFSET EFI_PAGE_SIZE
#pragma pack()
#endif