audk/NetworkPkg/Udp6Dxe/Udp6Driver.c

624 lines
21 KiB
C
Raw Normal View History

/** @file
Driver Binding functions and Service Binding functions for the Network driver module.
Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "Udp6Impl.h"
EFI_DRIVER_BINDING_PROTOCOL gUdp6DriverBinding = {
Udp6DriverBindingSupported,
Udp6DriverBindingStart,
Udp6DriverBindingStop,
0xa,
NULL,
NULL
};
EFI_SERVICE_BINDING_PROTOCOL mUdp6ServiceBinding = {
Udp6ServiceBindingCreateChild,
Udp6ServiceBindingDestroyChild
};
/**
Tests to see if this driver supports a given controller. If a child device is provided,
it further tests to see if this driver supports creating a handle for the specified child device.
This function checks to see if the driver specified by This supports the device specified by
ControllerHandle. Drivers will typically use the device path attached to
ControllerHandle and/or the services from the bus I/O abstraction attached to
ControllerHandle to determine if the driver supports ControllerHandle. This function
may be called many times during platform initialization. In order to reduce boot times, the tests
performed by this function must be very small, and take as little time as possible to execute. This
function must not change the state of any hardware devices, and this function must be aware that the
device specified by ControllerHandle may already be managed by the same driver or a
different driver. This function must match its calls to AllocatePages() with FreePages(),
AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
Because ControllerHandle may have been previously started by the same driver, if a protocol is
already in the opened state, then it must not be closed with CloseProtocol(). This is required
to guarantee the state of ControllerHandle is not modified by this function.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle The handle of the controller to test. This handle
must support a protocol interface that supplies
an I/O abstraction to the driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
parameter is ignored by device drivers, and is optional for bus
drivers. For bus drivers, if this parameter is not NULL, then
the bus driver must determine if the bus controller specified
by ControllerHandle and the child controller specified
by RemainingDevicePath are both supported by this
bus driver.
@retval EFI_SUCCESS The device specified by ControllerHandle and
RemainingDevicePath is supported by the driver specified by This.
@retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
RemainingDevicePath is already being managed by the driver
specified by This.
@retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
RemainingDevicePath is already being managed by a different
driver or an application that requires exclusive access.
Currently not implemented.
@retval EFI_UNSUPPORTED The device specified by ControllerHandle and
RemainingDevicePath is not supported by the driver specified by This.
**/
EFI_STATUS
EFIAPI
Udp6DriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE ControllerHandle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL
)
{
EFI_STATUS Status;
//
// Test for the Udp6ServiceBinding Protocol
//
Status = gBS->OpenProtocol (
ControllerHandle,
&gEfiUdp6ServiceBindingProtocolGuid,
NULL,
This->DriverBindingHandle,
ControllerHandle,
EFI_OPEN_PROTOCOL_TEST_PROTOCOL
);
if (!EFI_ERROR (Status)) {
return EFI_ALREADY_STARTED;
}
//
// Test for the Ip6ServiceBinding Protocol
//
Status = gBS->OpenProtocol (
ControllerHandle,
&gEfiIp6ServiceBindingProtocolGuid,
NULL,
This->DriverBindingHandle,
ControllerHandle,
EFI_OPEN_PROTOCOL_TEST_PROTOCOL
);
return Status;
}
/**
Start this driver on ControllerHandle.
This service is called by the EFI boot service ConnectController(). In order to make
drivers as small as possible, there are a few calling restrictions for
this service. ConnectController() must follow these
calling restrictions. If any other agent wishes to call Start() it
must also follow these calling restrictions.
@param[in] This Protocol instance pointer.
@param[in] ControllerHandle Handle of device to bind the driver to.
@param[in] RemainingDevicePath Optional parameter use to pick a specific child
device to start.
@retval EFI_SUCCES This driver is added to ControllerHandle.
@retval EFI_OUT_OF_RESOURCES The required system resource can't be allocated.
@retval other This driver does not support this device.
**/
EFI_STATUS
EFIAPI
Udp6DriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE ControllerHandle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL
)
{
EFI_STATUS Status;
UDP6_SERVICE_DATA *Udp6Service;
//
// Allocate Private Context Data Structure.
//
Udp6Service = AllocateZeroPool (sizeof (UDP6_SERVICE_DATA));
if (Udp6Service == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto EXIT;
}
Status = Udp6CreateService (Udp6Service, This->DriverBindingHandle, ControllerHandle);
if (EFI_ERROR (Status)) {
goto EXIT;
}
//
// Install the Udp6ServiceBindingProtocol on the ControllerHandle.
//
Status = gBS->InstallMultipleProtocolInterfaces (
&ControllerHandle,
&gEfiUdp6ServiceBindingProtocolGuid,
&Udp6Service->ServiceBinding,
NULL
);
if (EFI_ERROR (Status)) {
Udp6CleanService (Udp6Service);
goto EXIT;
}
EXIT:
if (EFI_ERROR (Status)) {
if (Udp6Service != NULL) {
FreePool (Udp6Service);
}
}
return Status;
}
/**
Callback function which provided by user to remove one node in NetDestroyLinkList process.
@param[in] Entry The entry to be removed.
@param[in] Context Pointer to the callback context corresponds to the Context in NetDestroyLinkList.
@retval EFI_SUCCESS The entry has been removed successfully.
@retval Others Fail to remove the entry.
**/
EFI_STATUS
EFIAPI
Udp6DestroyChildEntryInHandleBuffer (
IN LIST_ENTRY *Entry,
IN VOID *Context
)
{
UDP6_INSTANCE_DATA *Instance;
EFI_SERVICE_BINDING_PROTOCOL *ServiceBinding;
UINTN NumberOfChildren;
EFI_HANDLE *ChildHandleBuffer;
if (Entry == NULL || Context == NULL) {
return EFI_INVALID_PARAMETER;
}
Instance = NET_LIST_USER_STRUCT_S (Entry, UDP6_INSTANCE_DATA, Link, UDP6_INSTANCE_DATA_SIGNATURE);
ServiceBinding = ((UDP6_DESTROY_CHILD_IN_HANDLE_BUF_CONTEXT *) Context)->ServiceBinding;
NumberOfChildren = ((UDP6_DESTROY_CHILD_IN_HANDLE_BUF_CONTEXT *) Context)->NumberOfChildren;
ChildHandleBuffer = ((UDP6_DESTROY_CHILD_IN_HANDLE_BUF_CONTEXT *) Context)->ChildHandleBuffer;
if (!NetIsInHandleBuffer (Instance->ChildHandle, NumberOfChildren, ChildHandleBuffer)) {
return EFI_SUCCESS;
}
return ServiceBinding->DestroyChild (ServiceBinding, Instance->ChildHandle);
}
/**
Stop this driver on ControllerHandle.
This service is called by the EFI boot service DisconnectController(). In order to
make drivers as small as possible, there are a few calling
restrictions for this service. DisconnectController()
must follow these calling restrictions. If any other agent wishes
to call Stop(), it must also follow these calling restrictions.
@param[in] This Protocol instance pointer.
@param[in] ControllerHandle Handle of device to stop the driver on.
@param[in] NumberOfChildren Number of Handles in ChildHandleBuffer. If the number
of children is zero stop the entire bus driver.
@param[in] ChildHandleBuffer List of Child Handles to Stop. It is optional.
@retval EFI_SUCCES This driver is removed ControllerHandle.
@retval EFI_DEVICE_ERROR Can't find the NicHandle from the ControllerHandle and specified GUID.
@retval other This driver was not removed from this device.
**/
EFI_STATUS
EFIAPI
Udp6DriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE ControllerHandle,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer OPTIONAL
)
{
EFI_STATUS Status;
EFI_HANDLE NicHandle;
EFI_SERVICE_BINDING_PROTOCOL *ServiceBinding;
UDP6_SERVICE_DATA *Udp6Service;
LIST_ENTRY *List;
UDP6_DESTROY_CHILD_IN_HANDLE_BUF_CONTEXT Context;
//
// Find the NicHandle where UDP6 ServiceBinding Protocol is installed.
//
NicHandle = NetLibGetNicHandle (ControllerHandle, &gEfiIp6ProtocolGuid);
if (NicHandle == NULL) {
return EFI_SUCCESS;
}
//
// Retrieve the UDP6 ServiceBinding Protocol.
//
Status = gBS->OpenProtocol (
NicHandle,
&gEfiUdp6ServiceBindingProtocolGuid,
(VOID **) &ServiceBinding,
This->DriverBindingHandle,
NicHandle,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
return EFI_DEVICE_ERROR;
}
Udp6Service = UDP6_SERVICE_DATA_FROM_THIS (ServiceBinding);
if (NumberOfChildren != 0) {
//
// NumberOfChildren is not zero, destroy the children instances in ChildHandleBuffer.
//
List = &Udp6Service->ChildrenList;
Context.ServiceBinding = ServiceBinding;
Context.NumberOfChildren = NumberOfChildren;
Context.ChildHandleBuffer = ChildHandleBuffer;
Status = NetDestroyLinkList (
List,
Udp6DestroyChildEntryInHandleBuffer,
&Context,
NULL
);
} else if (IsListEmpty (&Udp6Service->ChildrenList)) {
gBS->UninstallMultipleProtocolInterfaces (
NicHandle,
&gEfiUdp6ServiceBindingProtocolGuid,
&Udp6Service->ServiceBinding,
NULL
);
Udp6CleanService (Udp6Service);
FreePool (Udp6Service);
Status = EFI_SUCCESS;
}
return Status;
}
/**
Creates a child handle and installs a protocol.
The CreateChild() function installs a protocol on ChildHandle.
If ChildHandle is a pointer to NULL, then a new handle is created and returned in ChildHandle.
If ChildHandle is not a pointer to NULL, then the protocol installs on the existing ChildHandle.
@param[in] This Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
@param[in, out] ChildHandle Pointer to the handle of the child to create. If it is NULL,
then a new handle is created. If it is a pointer to an existing UEFI handle,
then the protocol is added to the existing UEFI handle.
@retval EFI_SUCCES The protocol was added to ChildHandle.
@retval EFI_INVALID_PARAMETER This is NULL or ChildHandle is NULL.
@retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create
the child.
@retval other The child handle was not created.
**/
EFI_STATUS
EFIAPI
Udp6ServiceBindingCreateChild (
IN EFI_SERVICE_BINDING_PROTOCOL *This,
IN OUT EFI_HANDLE *ChildHandle
)
{
EFI_STATUS Status;
UDP6_SERVICE_DATA *Udp6Service;
UDP6_INSTANCE_DATA *Instance;
EFI_TPL OldTpl;
VOID *Ip6;
if ((This == NULL) || (ChildHandle == NULL)) {
return EFI_INVALID_PARAMETER;
}
Udp6Service = UDP6_SERVICE_DATA_FROM_THIS (This);
//
// Allocate the instance private data structure.
//
Instance = AllocateZeroPool (sizeof (UDP6_INSTANCE_DATA));
if (Instance == NULL) {
return EFI_OUT_OF_RESOURCES;
}
Udp6InitInstance (Udp6Service, Instance);
//
// Add an IpInfo for this instance.
//
Instance->IpInfo = IpIoAddIp (Udp6Service->IpIo);
if (Instance->IpInfo == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto ON_ERROR;
}
//
// Install the Udp6Protocol for this instance.
//
Status = gBS->InstallMultipleProtocolInterfaces (
ChildHandle,
&gEfiUdp6ProtocolGuid,
&Instance->Udp6Proto,
NULL
);
if (EFI_ERROR (Status)) {
goto ON_ERROR;
}
Instance->ChildHandle = *ChildHandle;
//
// Open the default Ip6 protocol in the IP_IO BY_CHILD.
//
Status = gBS->OpenProtocol (
Udp6Service->IpIo->ChildHandle,
&gEfiIp6ProtocolGuid,
(VOID **) &Ip6,
gUdp6DriverBinding.DriverBindingHandle,
Instance->ChildHandle,
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
if (EFI_ERROR (Status)) {
goto ON_ERROR;
}
//
// Open this instance's Ip6 protocol in the IpInfo BY_CHILD.
//
Status = gBS->OpenProtocol (
Instance->IpInfo->ChildHandle,
&gEfiIp6ProtocolGuid,
(VOID **) &Ip6,
gUdp6DriverBinding.DriverBindingHandle,
Instance->ChildHandle,
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
if (EFI_ERROR (Status)) {
goto ON_ERROR;
}
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
//
// Link this instance into the service context data and increase the ChildrenNumber.
//
InsertTailList (&Udp6Service->ChildrenList, &Instance->Link);
Udp6Service->ChildrenNumber++;
gBS->RestoreTPL (OldTpl);
return EFI_SUCCESS;
ON_ERROR:
if (Instance->ChildHandle != NULL) {
gBS->UninstallMultipleProtocolInterfaces (
Instance->ChildHandle,
&gEfiUdp6ProtocolGuid,
&Instance->Udp6Proto,
NULL
);
}
if (Instance->IpInfo != NULL) {
IpIoRemoveIp (Udp6Service->IpIo, Instance->IpInfo);
}
Udp6CleanInstance (Instance);
FreePool (Instance);
return Status;
}
/**
Destroys a child handle with a set of I/O services.
The DestroyChild() function does the opposite of CreateChild(). It removes a protocol
that was installed by CreateChild() from ChildHandle. If the removed protocol is the
last protocol on ChildHandle, then ChildHandle is destroyed.
@param[in] This Protocol instance pointer.
@param[in] ChildHandle Handle of the child to destroy.
@retval EFI_SUCCES The I/O services were removed from the child
handle.
@retval EFI_UNSUPPORTED The child handle does not support the I/O services
that are being removed.
@retval EFI_INVALID_PARAMETER Child handle is NULL.
@retval EFI_ACCESS_DENIED The child handle could not be destroyed because
its I/O services are being used.
@retval other The child handle was not destroyed.
**/
EFI_STATUS
EFIAPI
Udp6ServiceBindingDestroyChild (
IN EFI_SERVICE_BINDING_PROTOCOL *This,
IN EFI_HANDLE ChildHandle
)
{
EFI_STATUS Status;
UDP6_SERVICE_DATA *Udp6Service;
EFI_UDP6_PROTOCOL *Udp6Proto;
UDP6_INSTANCE_DATA *Instance;
EFI_TPL OldTpl;
if ((This == NULL) || (ChildHandle == NULL)) {
return EFI_INVALID_PARAMETER;
}
Udp6Service = UDP6_SERVICE_DATA_FROM_THIS (This);
//
// Try to get the Udp6 protocol from the ChildHandle.
//
Status = gBS->OpenProtocol (
ChildHandle,
&gEfiUdp6ProtocolGuid,
(VOID **) &Udp6Proto,
gUdp6DriverBinding.DriverBindingHandle,
ChildHandle,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
Instance = UDP6_INSTANCE_DATA_FROM_THIS (Udp6Proto);
if (Instance->InDestroy) {
return EFI_SUCCESS;
}
//
// Use the Destroyed flag to avoid the re-entering of the following code.
//
Instance->InDestroy = TRUE;
//
// Close the Ip6 protocol on the default IpIo.
//
gBS->CloseProtocol (
Udp6Service->IpIo->ChildHandle,
&gEfiIp6ProtocolGuid,
gUdp6DriverBinding.DriverBindingHandle,
Instance->ChildHandle
);
//
// Close the Ip6 protocol on this instance's IpInfo.
//
gBS->CloseProtocol (
Instance->IpInfo->ChildHandle,
&gEfiIp6ProtocolGuid,
gUdp6DriverBinding.DriverBindingHandle,
Instance->ChildHandle
);
//
// Uninstall the Udp6Protocol previously installed on the ChildHandle.
//
Status = gBS->UninstallMultipleProtocolInterfaces (
ChildHandle,
&gEfiUdp6ProtocolGuid,
(VOID *) &Instance->Udp6Proto,
NULL
);
if (EFI_ERROR (Status)) {
Instance->InDestroy = FALSE;
return Status;
}
//
// Reset the configuration in case the instance's consumer forgets to do this.
//
Udp6Proto->Configure (Udp6Proto, NULL);
//
// Remove the IpInfo this instance consumes.
//
IpIoRemoveIp (Udp6Service->IpIo, Instance->IpInfo);
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
//
// Remove this instance from the service context data's ChildrenList.
//
RemoveEntryList (&Instance->Link);
Udp6Service->ChildrenNumber--;
//
// Clean the instance.
//
Udp6CleanInstance (Instance);
gBS->RestoreTPL (OldTpl);
FreePool (Instance);
return EFI_SUCCESS;
}
/**
This is the declaration of an EFI image entry point. This entry point is
the same for UEFI Applications, UEFI OS Loaders, and UEFI Drivers, including
both device drivers and bus drivers.
The entry point for Udp6 driver that installs the driver binding
and component name protocol on its ImageHandle.
@param[in] ImageHandle The firmware allocated handle for the UEFI image.
@param[in] SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
**/
EFI_STATUS
EFIAPI
Udp6DriverEntryPoint (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
//
// Install the Udp6DriverBinding and Udp6ComponentName protocols.
//
Status = EfiLibInstallDriverBindingComponentName2 (
ImageHandle,
SystemTable,
&gUdp6DriverBinding,
ImageHandle,
&gUdp6ComponentName,
&gUdp6ComponentName2
);
if (!EFI_ERROR (Status)) {
//
// Initialize the UDP random port.
//
mUdp6RandomPort = (UINT16)(
((UINT16) NetRandomInitSeed ()) %
UDP6_PORT_KNOWN +
UDP6_PORT_KNOWN
);
}
return Status;
}