audk/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibRTSM/RTSMSec.c

/** @file
*
*  Copyright (c) 2011-2012, ARM Limited. All rights reserved.
*  
*  This program and the accompanying materials                          
*  are licensed and made available under the terms and conditions of the BSD License         
*  which accompanies this distribution.  The full text of the license may be found at        
*  http://opensource.org/licenses/bsd-license.php                                            
*
*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             
*
**/

#include <Library/IoLib.h>
#include <Library/ArmPlatformLib.h>
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>

#include <Drivers/PL310L2Cache.h>
#include <Drivers/SP804Timer.h>

#include <ArmPlatform.h>

/**
  Initialize the Secure peripherals and memory regions

  If Trustzone is supported by your platform then this function makes the required initialization
  of the secure peripherals and memory regions.

**/
VOID
ArmPlatformSecTrustzoneInit (
  IN  UINTN                     MpId
  )
{
  // No TZPC or TZASC on RTSM to initialize
}

/**
  Initialize controllers that must setup at the early stage

  Some peripherals must be initialized in Secure World.
  For example, some L2x0 requires to be initialized in Secure World

**/
RETURN_STATUS
ArmPlatformSecInitialize (
  IN  UINTN                     MpId
  )
{
  // If it is not the primary core then there is nothing to do
  if (!IS_PRIMARY_CORE(MpId)) {
    return RETURN_SUCCESS;
  }

  // Configure periodic timer (TIMER0) for 1MHz operation
  MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_TIMCLK);
  // Configure 1MHz clock
  MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_TIMCLK);
  // Configure SP810 to use 1MHz clock and disable
  MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK);
  // Configure SP810 to use 1MHz clock and disable
  MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER3_EN, SP810_SYS_CTRL_TIMER3_TIMCLK);

  return RETURN_SUCCESS;
}

/**
  Call before jumping to Normal World

  This function allows the firmware platform to do extra actions before
  jumping to the Normal World

**/
VOID
ArmPlatformSecExtraAction (
  IN  UINTN         MpId,
  OUT UINTN*        JumpAddress
  )
{
  *JumpAddress = PcdGet32(PcdFvBaseAddress);
}