audk/EmbeddedPkg/GdbStub/SerialIo.c

554 lines
15 KiB
C
Raw Normal View History

/** @file
Serial IO Abstraction for GDB stub. This allows an EFI consoles that shows up on the system
running GDB. One consle for error information and another console for user input/output.
Basic packet format is $packet-data#checksum. So every comand has 4 bytes of overhead: $,
#, 0, 0. The 0 and 0 are the ascii characters for the checksum.
Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <GdbStubInternal.h>
//
// Set TRUE if F Reply package signals a ctrl-c. We can not process the Ctrl-c
// here we need to wait for the periodic callback to do this.
//
BOOLEAN gCtrlCBreakFlag = FALSE;
//
// If the periodic callback is called while we are processing an F packet we need
// to let the callback know to not read from the serail stream as it could steal
// characters from the F reponse packet
//
BOOLEAN gProcessingFPacket = FALSE;
/**
Process a control-C break message.
Currently a place holder, remove the ASSERT when it gets implemented.
@param ErrNo Error infomration from the F reply packet or other source
**/
VOID
GdbCtrlCBreakMessage (
IN UINTN ErrNo
)
{
// See D.10.5 of gdb.pdf
// This should look like a break message. Should look like SIGINT
/* TODO: Make sure if we should do anything with ErrNo */
//Turn on the global Ctrl-C flag.
gCtrlCBreakFlag = TRUE;
}
/**
Parse the F reply packet and extract the return value and an ErrNo if it exists.
@param Packet Packet to parse like an F reply packet
@param ErrNo Buffer to hold Count bytes that were read
@retval -1 Error, not a valid F reply packet
@retval other Return the return code from the F reply packet
**/
INTN
GdbParseFReplyPacket (
IN CHAR8 *Packet,
OUT UINTN *ErrNo
)
{
INTN RetCode;
if (Packet[0] != 'F') {
// A valid responce would be an F packet
return -1;
}
RetCode = AsciiStrHexToUintn (&Packet[1]);
// Find 1st comma
for (;*Packet != '\0' && *Packet != ','; Packet++);
if (*Packet == '\0') {
*ErrNo = 0;
return RetCode;
}
*ErrNo = AsciiStrHexToUintn (++Packet);
// Find 2nd comma
for (;*Packet != '\0' && *Packet != ','; Packet++);
if (*Packet == '\0') {
return RetCode;
}
if (*(++Packet) == 'C') {
GdbCtrlCBreakMessage (*ErrNo);
}
return RetCode;
}
/**
Read data from a FileDescriptor. On success number of bytes read is returned. Zero indicates
the end of a file. On error -1 is returned. If count is zero, GdbRead returns zero.
@param FileDescriptor Device to talk to.
@param Buffer Buffer to hold Count bytes that were read
@param Count Number of bytes to transfer.
@retval -1 Error
@retval {other} Number of bytes read.
**/
INTN
GdbRead (
IN INTN FileDescriptor,
OUT VOID *Buffer,
IN UINTN Count
)
{
CHAR8 Packet[128];
UINTN Size;
INTN RetCode;
UINTN ErrNo;
BOOLEAN ReceiveDone = FALSE;
// Send:
// "Fread,XX,YYYYYYYY,XX
//
// XX - FileDescriptor in ASCII
// YYYYYYYY - Buffer address in ASCII
// XX - Count in ASCII
// SS - check sum
//
Size = AsciiSPrint (Packet, sizeof (Packet), "Fread,%x,%x,%x", FileDescriptor, Buffer, Count);
// Packet array is too small if you got this ASSERT
ASSERT (Size < sizeof (Packet));
gProcessingFPacket = TRUE;
SendPacket (Packet);
Print ((CHAR16 *)L"Packet sent..\n");
do {
// Reply:
ReceivePacket (Packet, sizeof (Packet));
Print ((CHAR16 *)L"Command received..%c\n", Packet[0]);
// Process GDB commands
switch (Packet[0]) {
//Write memory command.
//M addr,length:XX...
case 'M':
WriteToMemory (Packet);
break;
//Fretcode, errno, Ctrl-C flag
//retcode - Count read
case 'F':
//Once target receives F reply packet that means the previous
//transactions are finished.
ReceiveDone = TRUE;
break;
//Send empty buffer
default :
SendNotSupported();
break;
}
} while (ReceiveDone == FALSE);
RetCode = GdbParseFReplyPacket (Packet, &ErrNo);
Print ((CHAR16 *)L"RetCode: %x..ErrNo: %x..\n", RetCode, ErrNo);
if (ErrNo > 0) {
//Send error to the host if there is any.
SendError ((UINT8)ErrNo);
}
gProcessingFPacket = FALSE;
return RetCode;
}
/**
Write data to a FileDescriptor. On success number of bytes written is returned. Zero indicates
nothing was written. On error -1 is returned.
@param FileDescriptor Device to talk to.
@param Buffer Buffer to hold Count bytes that are to be written
@param Count Number of bytes to transfer.
@retval -1 Error
@retval {other} Number of bytes written.
**/
INTN
GdbWrite (
IN INTN FileDescriptor,
OUT CONST VOID *Buffer,
IN UINTN Count
)
{
CHAR8 Packet[128];
UINTN Size;
INTN RetCode;
UINTN ErrNo;
BOOLEAN ReceiveDone = FALSE;
// Send:
// #Fwrite,XX,YYYYYYYY,XX$SS
//
// XX - FileDescriptor in ASCII
// YYYYYYYY - Buffer address in ASCII
// XX - Count in ASCII
// SS - check sum
//
Size = AsciiSPrint (Packet, sizeof (Packet), "Fwrite,%x,%x,%x", FileDescriptor, Buffer, Count);
// Packet array is too small if you got this ASSERT
ASSERT (Size < sizeof (Packet));
SendPacket (Packet);
Print ((CHAR16 *)L"Packet sent..\n");
do {
// Reply:
ReceivePacket (Packet, sizeof (Packet));
Print ((CHAR16 *)L"Command received..%c\n", Packet[0]);
// Process GDB commands
switch (Packet[0]) {
//Read memory command.
//m addr,length.
case 'm':
ReadFromMemory (Packet);
break;
//Fretcode, errno, Ctrl-C flag
//retcode - Count read
case 'F':
//Once target receives F reply packet that means the previous
//transactions are finished.
ReceiveDone = TRUE;
break;
//Send empty buffer
default :
SendNotSupported();
break;
}
} while (ReceiveDone == FALSE);
RetCode = GdbParseFReplyPacket (Packet, &ErrNo);
Print ((CHAR16 *)L"RetCode: %x..ErrNo: %x..\n", RetCode, ErrNo);
//Send error to the host if there is any.
if (ErrNo > 0) {
SendError((UINT8)ErrNo);
}
return RetCode;
}
/**
Reset the serial device.
@param This Protocol instance pointer.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The serial device could not be reset.
**/
EFI_STATUS
EFIAPI
GdbSerialReset (
IN EFI_SERIAL_IO_PROTOCOL *This
)
{
return EFI_SUCCESS;
}
/**
Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
data buts, and stop bits on a serial device.
@param This Protocol instance pointer.
@param BaudRate The requested baud rate. A BaudRate value of 0 will use the the
device's default interface speed.
@param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
serial interface. A ReceiveFifoDepth value of 0 will use
the device's dfault FIFO depth.
@param Timeout The requested time out for a single character in microseconds.
This timeout applies to both the transmit and receive side of the
interface. A Timeout value of 0 will use the device's default time
out value.
@param Parity The type of parity to use on this serial device. A Parity value of
DefaultParity will use the device's default parity value.
@param DataBits The number of data bits to use on the serial device. A DataBits
vaule of 0 will use the device's default data bit setting.
@param StopBits The number of stop bits to use on this serial device. A StopBits
value of DefaultStopBits will use the device's default number of
stop bits.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The serial device could not be reset.
**/
EFI_STATUS
EFIAPI
GdbSerialSetAttributes (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN UINT64 BaudRate,
IN UINT32 ReceiveFifoDepth,
IN UINT32 Timeout,
IN EFI_PARITY_TYPE Parity,
IN UINT8 DataBits,
IN EFI_STOP_BITS_TYPE StopBits
)
{
return EFI_UNSUPPORTED;
}
/**
Set the control bits on a serial device
@param This Protocol instance pointer.
@param Control Set the bits of Control that are settable.
@retval EFI_SUCCESS The new control bits were set on the serial device.
@retval EFI_UNSUPPORTED The serial device does not support this operation.
@retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
**/
EFI_STATUS
EFIAPI
GdbSerialSetControl (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN UINT32 Control
)
{
return EFI_UNSUPPORTED;
}
/**
Retrieves the status of thecontrol bits on a serial device
@param This Protocol instance pointer.
@param Control A pointer to return the current Control signals from the serial device.
@retval EFI_SUCCESS The control bits were read from the serial device.
@retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
**/
EFI_STATUS
EFIAPI
GdbSerialGetControl (
IN EFI_SERIAL_IO_PROTOCOL *This,
OUT UINT32 *Control
)
{
return EFI_UNSUPPORTED;
}
/**
Writes data to a serial device.
@param This Protocol instance pointer.
@param BufferSize On input, the size of the Buffer. On output, the amount of
data actually written.
@param Buffer The buffer of data to write
@retval EFI_SUCCESS The data was written.
@retval EFI_DEVICE_ERROR The device reported an error.
@retval EFI_TIMEOUT The data write was stopped due to a timeout.
**/
EFI_STATUS
EFIAPI
GdbSerialWrite (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN OUT UINTN *BufferSize,
IN VOID *Buffer
)
{
GDB_SERIAL_DEV *SerialDev;
UINTN Return;
SerialDev = GDB_SERIAL_DEV_FROM_THIS (This);
Return = GdbWrite (SerialDev->OutFileDescriptor, Buffer, *BufferSize);
if (Return == (UINTN)-1) {
return EFI_DEVICE_ERROR;
}
if (Return != *BufferSize) {
*BufferSize = Return;
}
return EFI_SUCCESS;
}
/**
Writes data to a serial device.
@param This Protocol instance pointer.
@param BufferSize On input, the size of the Buffer. On output, the amount of
data returned in Buffer.
@param Buffer The buffer to return the data into.
@retval EFI_SUCCESS The data was read.
@retval EFI_DEVICE_ERROR The device reported an error.
@retval EFI_TIMEOUT The data write was stopped due to a timeout.
**/
EFI_STATUS
EFIAPI
GdbSerialRead (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN OUT UINTN *BufferSize,
OUT VOID *Buffer
)
{
GDB_SERIAL_DEV *SerialDev;
UINTN Return;
SerialDev = GDB_SERIAL_DEV_FROM_THIS (This);
Return = GdbRead (SerialDev->InFileDescriptor, Buffer, *BufferSize);
if (Return == (UINTN)-1) {
return EFI_DEVICE_ERROR;
}
if (Return != *BufferSize) {
*BufferSize = Return;
}
return EFI_SUCCESS;
}
//
// Template used to initailize the GDB Serial IO protocols
//
GDB_SERIAL_DEV gdbSerialDevTemplate = {
GDB_SERIAL_DEV_SIGNATURE,
NULL,
{ // SerialIo
SERIAL_IO_INTERFACE_REVISION,
GdbSerialReset,
GdbSerialSetAttributes,
GdbSerialSetControl,
GdbSerialGetControl,
GdbSerialWrite,
GdbSerialRead,
NULL
},
{ // SerialMode
0, // ControlMask
0, // Timeout
0, // BaudRate
1, // RceiveFifoDepth
0, // DataBits
0, // Parity
0 // StopBits
},
{
{
{
HARDWARE_DEVICE_PATH,
HW_VENDOR_DP,
{
(UINT8) (sizeof (VENDOR_DEVICE_PATH) + sizeof (UINT32)),
(UINT8) ((sizeof (VENDOR_DEVICE_PATH) + sizeof (UINT32)) >> 8)
},
},
EFI_SERIAL_IO_PROTOCOL_GUID
},
0,
{
END_DEVICE_PATH_TYPE,
END_ENTIRE_DEVICE_PATH_SUBTYPE,
{
(UINT8) (sizeof (EFI_DEVICE_PATH_PROTOCOL)),
(UINT8) (sizeof (EFI_DEVICE_PATH_PROTOCOL) >> 8)
}
},
},
GDB_STDIN,
GDB_STDOUT
};
/**
Make two serial consoles: 1) StdIn and StdOut via GDB. 2) StdErr via GDB.
These console show up on the remote system running GDB
**/
VOID
GdbInitializeSerialConsole (
VOID
)
{
EFI_STATUS Status;
GDB_SERIAL_DEV *StdOutSerialDev;
GDB_SERIAL_DEV *StdErrSerialDev;
// Use the template to make a copy of the Serial Console private data structure.
StdOutSerialDev = AllocateCopyPool (sizeof (GDB_SERIAL_DEV), &gdbSerialDevTemplate);
ASSERT (StdOutSerialDev != NULL);
// Fixup pointer after the copy
StdOutSerialDev->SerialIo.Mode = &StdOutSerialDev->SerialMode;
StdErrSerialDev = AllocateCopyPool (sizeof (GDB_SERIAL_DEV), &gdbSerialDevTemplate);
ASSERT (StdErrSerialDev != NULL);
// Fixup pointer and modify stuff that is different for StdError
StdErrSerialDev->SerialIo.Mode = &StdErrSerialDev->SerialMode;
StdErrSerialDev->DevicePath.Index = 1;
StdErrSerialDev->OutFileDescriptor = GDB_STDERR;
// Make a new handle with Serial IO protocol and its device path on it.
Status = gBS->InstallMultipleProtocolInterfaces (
&StdOutSerialDev->Handle,
&gEfiSerialIoProtocolGuid, &StdOutSerialDev->SerialIo,
&gEfiDevicePathProtocolGuid, &StdOutSerialDev->DevicePath,
NULL
);
ASSERT_EFI_ERROR (Status);
// Make a new handle with Serial IO protocol and its device path on it.
Status = gBS->InstallMultipleProtocolInterfaces (
&StdErrSerialDev->Handle,
&gEfiSerialIoProtocolGuid, &StdErrSerialDev->SerialIo,
&gEfiDevicePathProtocolGuid, &StdErrSerialDev->DevicePath,
NULL
);
ASSERT_EFI_ERROR (Status);
}