audk/MdePkg/Library/BaseDebugLibSerialPort/DebugLib.c

285 lines
8.6 KiB
C
Raw Normal View History

/** @file
Base Debug library instance base on Serial Port library.
It uses PrintLib to send debug messages to serial port device.
NOTE: If the Serial Port library enables hardware flow control, then a call
to DebugPrint() or DebugAssert() may hang if writes to the serial port are
being blocked. This may occur if a key(s) are pressed in a terminal emulator
used to monitor the DEBUG() and ASSERT() messages.
2011-03-10 23:12:34 +01:00
Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <Base.h>
#include <Library/DebugLib.h>
#include <Library/BaseLib.h>
#include <Library/PrintLib.h>
#include <Library/PcdLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/SerialPortLib.h>
2011-03-10 23:12:34 +01:00
#include <Library/DebugPrintErrorLevelLib.h>
//
// Define the maximum debug and assert message length that this library supports
//
#define MAX_DEBUG_MESSAGE_LENGTH 0x100
/**
The constructor function initialize the Serial Port Library
@retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
**/
RETURN_STATUS
EFIAPI
BaseDebugLibSerialPortConstructor (
VOID
)
{
return SerialPortInitialize ();
}
/**
Prints a debug message to the debug output device if the specified error level is enabled.
2011-03-10 23:12:34 +01:00
If any bit in ErrorLevel is also set in DebugPrintErrorLevelLib function
GetDebugPrintErrorLevel (), then print the message specified by Format and the
associated variable argument list to the debug output device.
If Format is NULL, then ASSERT().
@param ErrorLevel The error level of the debug message.
@param Format Format string for the debug message to print.
@param ... Variable argument list whose contents are accessed
based on the format string specified by Format.
**/
VOID
EFIAPI
DebugPrint (
IN UINTN ErrorLevel,
IN CONST CHAR8 *Format,
...
)
{
CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH];
VA_LIST Marker;
//
// If Format is NULL, then ASSERT().
//
ASSERT (Format != NULL);
//
// Check driver debug mask value and global mask
//
2011-03-10 23:12:34 +01:00
if ((ErrorLevel & GetDebugPrintErrorLevel ()) == 0) {
return;
}
//
// Convert the DEBUG() message to an ASCII String
//
VA_START (Marker, Format);
AsciiVSPrint (Buffer, sizeof (Buffer), Format, Marker);
VA_END (Marker);
//
// Send the print string to a Serial Port
//
SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer));
}
/**
Prints an assert message containing a filename, line number, and description.
This may be followed by a breakpoint or a dead loop.
Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"
to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if
DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then
CpuDeadLoop() is called. If neither of these bits are set, then this function
returns immediately after the message is printed to the debug output device.
DebugAssert() must actively prevent recursion. If DebugAssert() is called while
processing another DebugAssert(), then DebugAssert() must return immediately.
If FileName is NULL, then a <FileName> string of "(NULL) Filename" is printed.
If Description is NULL, then a <Description> string of "(NULL) Description" is printed.
@param FileName The pointer to the name of the source file that generated the assert condition.
@param LineNumber The line number in the source file that generated the assert condition
@param Description The pointer to the description of the assert condition.
**/
VOID
EFIAPI
DebugAssert (
IN CONST CHAR8 *FileName,
IN UINTN LineNumber,
IN CONST CHAR8 *Description
)
{
CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH];
//
// Generate the ASSERT() message in Ascii format
//
AsciiSPrint (Buffer, sizeof (Buffer), "ASSERT [%a] %a(%d): %a\n", gEfiCallerBaseName, FileName, LineNumber, Description);
//
// Send the print string to the Console Output device
//
SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer));
//
// Generate a Breakpoint, DeadLoop, or NOP based on PCD settings
//
if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) {
CpuBreakpoint ();
} else if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) != 0) {
CpuDeadLoop ();
}
}
/**
Fills a target buffer with PcdDebugClearMemoryValue, and returns the target buffer.
This function fills Length bytes of Buffer with the value specified by
PcdDebugClearMemoryValue, and returns Buffer.
If Buffer is NULL, then ASSERT().
If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().
@param Buffer The pointer to the target buffer to be filled with PcdDebugClearMemoryValue.
@param Length The number of bytes in Buffer to fill with zeros PcdDebugClearMemoryValue.
@return Buffer The pointer to the target buffer filled with PcdDebugClearMemoryValue.
**/
VOID *
EFIAPI
DebugClearMemory (
OUT VOID *Buffer,
IN UINTN Length
)
{
//
// If Buffer is NULL, then ASSERT().
//
ASSERT (Buffer != NULL);
//
// SetMem() checks for the the ASSERT() condition on Length and returns Buffer
//
return SetMem (Buffer, Length, PcdGet8(PcdDebugClearMemoryValue));
}
/**
Returns TRUE if ASSERT() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
PcdDebugProperyMask is set. Otherwise FALSE is returned.
@retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.
@retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.
**/
BOOLEAN
EFIAPI
DebugAssertEnabled (
VOID
)
{
return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0);
}
/**
Returns TRUE if DEBUG() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
PcdDebugProperyMask is set. Otherwise FALSE is returned.
@retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.
@retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.
**/
BOOLEAN
EFIAPI
DebugPrintEnabled (
VOID
)
{
return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) != 0);
}
/**
Returns TRUE if DEBUG_CODE() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
PcdDebugProperyMask is set. Otherwise FALSE is returned.
@retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.
@retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.
**/
BOOLEAN
EFIAPI
DebugCodeEnabled (
VOID
)
{
return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_CODE_ENABLED) != 0);
}
/**
Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.
This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
PcdDebugProperyMask is set. Otherwise FALSE is returned.
@retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.
@retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.
**/
BOOLEAN
EFIAPI
DebugClearMemoryEnabled (
VOID
)
{
return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0);
}
/**
Returns TRUE if any one of the bit is set both in ErrorLevel and PcdFixedDebugPrintErrorLevel.
This function compares the bit mask of ErrorLevel and PcdFixedDebugPrintErrorLevel.
@retval TRUE Current ErrorLevel is supported.
@retval FALSE Current ErrorLevel is not supported.
**/
BOOLEAN
EFIAPI
DebugPrintLevelEnabled (
IN CONST UINTN ErrorLevel
)
{
return (BOOLEAN) ((ErrorLevel & PcdGet32(PcdFixedDebugPrintErrorLevel)) != 0);
}