audk/MdeModulePkg/MdeModulePkg.dec

357 lines
18 KiB
Plaintext
Raw Normal View History

## @file MdeModulePkg.dec
#
# This package provides the modules that conform to EFI/PI Industry standards.
# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)
# and libraries instances, which are used for those modules.
#
# Copyright (c) 2007 - 2009, Intel Corporation.
#
# All rights reserved.
# This program and the accompanying materials are licensed and made available under
# the terms and conditions of the BSD License which accompanies this distribution.
# The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
##
[Defines]
DEC_SPECIFICATION = 0x00010005
PACKAGE_NAME = MdeModulePkg
PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288
PACKAGE_VERSION = 0.1
[Includes.common]
Include
[LibraryClasses.common]
## @libraryclass IpIo layer upon EFI IP4 Protocol.
# This library is only intended to be used by UEFI network stack modules.
IpIoLib|Include/Library/IpIoLib.h
## @libraryclass Basic function for UEFI network stack.
# This library is only intended to be used by UEFI network stack modules.
NetLib|Include/Library/NetLib.h
## @libraryclass The helper routines to access UDP service.
# This library is only intended to be used by UEFI network stack modules.
UdpIoLib|Include/Library/UdpIoLib.h
## @libraryclass Defines a set of methods to reset whole system.
ResetSystemLib|Include/Library/ResetSystemLib.h
## @libraryclass Defines a set of methods related do S3 mode.
S3Lib|Include/Library/S3Lib.h
## @libraryclass Defines a set of methods related recovery mode.
RecoveryLib|Include/Library/RecoveryLib.h
## @libraryclass Provides HII related functions.
HiiLib|Include/Library/HiiLib.h
## @libraryclass Defines a set of interfaces on how to process capusle image update.
CapsuleLib|Include/Library/CapsuleLib.h
## @libraryclass Library for Deferred Procedure Calls.
DpcLib|Include/Library/DpcLib.h
## @libraryclass Provides global variables that are pointers
## to the UEFI HII related protocols.
##
UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
[Guids.common]
## MdeModule package token space guid
## Include/Guid/MdeModulePkgTokenSpace.h
gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
## Hob guid for Pcd DataBase
## Include/Guid/PcdDataBaseHobGuid.h
gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
## Guid for EDKII implementation GUIDed opcodes
# Include/Guid/MdeModuleHii.h
gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
## Guid for Framework vfr GUIDed opcodes.
# Include/Guid/MdeModuleHii.h
gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
## Guid to specify the System Non Volatile FV
## Include/Guid/SystemNvDataGuid.h
gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
## Guid specify the device is the console out device.
## Include/Guid/ConsoleOutDevice.h
gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
## Guid specify the device is the console in device.
## Include/Guid/ConsoleInDevice.h
gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
## Hob and Variable guid specify the platform memory type information.
## Include/Guid/MemoryTypeInformation.h
gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
## Capsule update hob and variable guid
## Include/Guid/CapsuleVendor.h
gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
## Guid specifiy the device is the StdErr device.
## Include/Guid/StandardErrorDevice.h
gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
## Include/Guid/VariableFormat.h
gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
## Include/Guid/Performance.h
gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}
## Guid is defined for CRC32 encapsulation scheme.
## Include/Guid/Crc32GuidedSectionExtraction.h
gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
## Include/Guid/NicIp4ConfigNvData.h
gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
[Protocols.common]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
## Include/Protocol/LoadPe32Image.h
## This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
## If developer need implement such functionality, they should use BasePeCoffLib.
gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
## Print protocol defines basic print functions to print the format unicode and ascii string.
## Include/Protocol/Print2.h
gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
## This protocol defines the generic memory test interfaces in Dxe phase.
## Include/Protocol/GenericMemoryTest.h
gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
## Include/Protocol/Dpc.h
gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
# Include/Protocol/FaultTolerantWrite.h
gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
# Include/Protocol/SwapAddressRange.h
gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
[PcdsFeatureFlag]
## Indicate whether platform can support update capsule across a system reset
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
## This feature flag can be used to enable or disable all PCD PEIM services.
# If TRUE, all PCD PPI services will be produced.
## If FALSE, the minimal PCD PEIM services (only GetService) will be produced.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
## If TRUE, then the Device Path To Text Protocol should be produced by the platform.
# It can be disabled to save size.
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
## If TRUE, then the Device Path From Text Protocol should be produced by the platform.
# It can be disabled to save size.
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
## If TRUE, enable the statistic functionality about variable usage. Such information is
# stored as a vendor configuration table into the EFI system table.
# If user wants to use VariableInfo application in MdeModulePkg\Application directory to get
# variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can
# not output useful info.
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
## If TRUE, Unicode Collation Protocol will be installed.
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
## If TRUE, Unicode Collation 2 Protocol will be installed.
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
# It could be set FALSE to save size.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
# It could be set FALSE to save size.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.
# If TE section is not found, then PeiCore will search PE section.
# If FALSE, PeiCore will first search PE section from PEIM to load the image.
# This PCD is used to tune Pei phase performance to reduce the search image time.
# It can be set according to the generated image section type.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI
# interrupt to access usb device in the case of absence of usb stack.
##
gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
## If TRUE, HiiImageProtocol will be installed.
# FALSE is for size reduction.
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
## If TRUE, USB KeyBoard Driver disables the default keyboard layout.
# The default keyboard layout serves as the backup when no keyboard layout can be retrieved
# from HII database.
gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
# If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
## This is used to provide backward compatibility support to Framework HII and Framework FvHob.
gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
##
# If TRUE, HelloWorld Application will print the verbose information.
# This PCD is a sample to explain FeatureFlag PCD usage.
##
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
##
# If TRUE, FULL FTW protocol services (total six APIs) will be produced.
# If FASLE, only FTW Write service is available.
gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
##
# If TRUE, DXE IPL must support the UEFI decompression algorithm.
# If FALSE, DXE IPL will not support UEFI decompression to save space.
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
[PcdsFeatureFlag.IA32]
##
# This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.
# If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;
# otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.
# It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
# is built in firmware.
#
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
[PcdsFixedAtBuild]
## Dynamic type PCD can be registered callback function for Pcd setting action.
# PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function
# for a dynamic PCD used in PEI phase.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress
# to store PCD value.
#
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
## Maximum number of FV is supported by PeiCore's dispatching.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
## Maximum PEIM count in every FV is supported by PeiCore's dispatching.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
## Maximum stack size for PeiCore.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
## Maximum PPI count is supported by PeiCore's PPI database.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize
# The root cause is that variable driver will use FTW protocol to reclaim variable region.
# If the length of variable region is larger than FTW spare size, it means the whole variable region can not
# be reflushed through the manner of fault tolerant write.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
## The maximum size of single common variable, that is non-HwErr type varible.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
## The maximum size of single hardware error record variable.
# In IA32/X64 platforms, this value should be larger than 1KB.
# In IA64 platforms, this value should be larger than 128KB.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
## The size of reserved HwErr variable space. This space is located at NV variable range.
# HwErr type variable is stored with common non-volatile variables in NV region.
# this value is used to guarantee the space of HwErr type variable and not populated by common variable.
gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x8000|UINT32|0x30000006
## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize
# The root cause is that variable driver will use FTW protocol to reclaim variable region.
# If the length of variable region is larger than FTW spare size, it means the whole variable region can not
# be reflushed through the manner of fault tolerant write.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
## Size of the FTW working block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
## FFS filename to find the ACPI tables
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|16
[PcdsFixedAtBuild,PcdsPatchableInModule]
## Maximun number of performance log entries during PEI phase.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
## RTC Update Timeout Value
gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
[PcdsPatchableInModule,PcdsDynamic]
##
# This PCD defines the Console output column and the default value is 25 according to UEFI spec
##
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
##
# This PCD defines the Console output row and the default value is 80 according to UEFI spec
##
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
[PcdsFixedAtBuild,PcdsDynamic]
## Base address of the NV variable range in flash device
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
## Base address of the FTW spare block range in flash device.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
## Base address of the FTW working block range in flash device.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
##
# This PCD defines the print string.
# This PCD is a sample to explain String typed PCD usage.
##
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
[PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]
##
# This PCD defines the times to print hello world string.
# This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.
##
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
## Indicate the max size of the populated capsule image that the platform can support.
# The default max size is 100MB (0x6400000) for more than one large capsule images.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
## Indicate the max size of the non-populated capsule image that the platform can support.
# The default max size is 10MB (0xa00000) for the casule image without populated flag setting.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0xx00010050
## Firmware revision that is default value filled into the EFI System Table
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
## Null-terminated Unicode string that described the firmware version
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
## Null-terminated Unicode string that contains the date the formware was released
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053