audk/MdePkg/Include/Protocol/BlockIo.h

/** @file
  Block IO protocol as defined in the UEFI 2.0 specification.

  The Block IO protocol is used to abstract block devices like hard drives,
  DVD-ROMs and floppy drives.

  Copyright (c) 2006 - 2008, Intel Corporation                                                         
  All rights reserved. This program and the accompanying materials                          
  are licensed and made available under the terms and conditions of the BSD License         
  which accompanies this distribution.  The full text of the license may be found at        
  http://opensource.org/licenses/bsd-license.php                                            

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

**/

#ifndef __BLOCK_IO_H__
#define __BLOCK_IO_H__

#define EFI_BLOCK_IO_PROTOCOL_GUID \
  { \
    0x964e5b21, 0x6459, 0x11d2, {0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b } \
  }

typedef struct _EFI_BLOCK_IO_PROTOCOL  EFI_BLOCK_IO_PROTOCOL;

///
/// Protocol GUID name defined in EFI1.1.
/// 
#define BLOCK_IO_PROTOCOL       EFI_BLOCK_IO_PROTOCOL_GUID

///
/// Protocol defined in EFI1.1.
/// 
typedef EFI_BLOCK_IO_PROTOCOL   EFI_BLOCK_IO;

/**
  Reset the Block Device.

  @param  This                 Protocol instance pointer.
  @param  ExtendedVerification Driver may perform diagnostics on reset.

  @retval EFI_SUCCESS          The device was reset.
  @retval EFI_DEVICE_ERROR     The device is not functioning properly and could
                               not be reset.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_BLOCK_RESET)(
  IN EFI_BLOCK_IO_PROTOCOL          *This,
  IN BOOLEAN                        ExtendedVerification
  );

/**
  Read BufferSize bytes from Lba into Buffer.

  @param  This       Protocol instance pointer.
  @param  MediaId    Id of the media, changes every time the media is replaced.
  @param  Lba        The starting Logical Block Address to read from
  @param  BufferSize Size of Buffer, must be a multiple of device block size.
  @param  Buffer     Buffer containing read data

  @retval EFI_SUCCESS           The data was read correctly from the device.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.
  @retval EFI_NO_MEDIA          There is no media in the device.
  @retval EFI_MEDIA_CHANGED     The MediaId does not matched the current device.
  @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
  @retval EFI_INVALID_PARAMETER The read request contains device addresses that are not
                                valid for the device.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_BLOCK_READ)(
  IN EFI_BLOCK_IO_PROTOCOL          *This,
  IN UINT32                         MediaId,
  IN EFI_LBA                        Lba,
  IN UINTN                          BufferSize,
  OUT VOID                          *Buffer
  );

/**
  Write BufferSize bytes from Lba into Buffer.

  @param  This       Protocol instance pointer.
  @param  MediaId    Id of the media, changes every time the media is replaced.
  @param  Lba        The starting Logical Block Address to read from
  @param  BufferSize Size of Buffer, must be a multiple of device block size.
  @param  Buffer     Buffer containing read data

  @retval EFI_SUCCESS           The data was written correctly to the device.
  @retval EFI_WRITE_PROTECTED   The device can not be written to.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
  @retval EFI_NO_MEDIA          There is no media in the device.
  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
  @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
  @retval EFI_INVALID_PARAMETER The write request contains a LBA that is not
                                valid for the device.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_BLOCK_WRITE)(
  IN EFI_BLOCK_IO_PROTOCOL          *This,
  IN UINT32                         MediaId,
  IN EFI_LBA                        Lba,
  IN UINTN                          BufferSize,
  IN VOID                           *Buffer
  );

/**
  Flush the Block Device.

  @param  This              Protocol instance pointer.

  @retval EFI_SUCCESS       All outstanding data was written to the device
  @retval EFI_DEVICE_ERROR  The device reported an error while writting back the data
  @retval EFI_NO_MEDIA      There is no media in the device.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_BLOCK_FLUSH)(
  IN EFI_BLOCK_IO_PROTOCOL  *This
  );

/**
  Block IO read only mode data and updated only via members of BlockIO
**/
typedef struct {
  ///
  /// The curent media Id. If the media changes, this value is changed.
  ///
  UINT32  MediaId;         
   
  ///
  /// TRUE if the media is removable; otherwise, FALSE.
  ///    
  BOOLEAN RemovableMedia;
  
  ///
  /// TRUE if there is a media currently present in the device;
  /// othersise, FALSE. THis field shows the media present status
  /// as of the most recent ReadBlocks() or WriteBlocks() call.  
  ///
  BOOLEAN MediaPresent;

  ///
  /// TRUE if LBA 0 is the first block of a partition; otherwise
  /// FALSE. For media with only one partition this would be TRUE.
  ///
  BOOLEAN LogicalPartition;
  
  ///
  /// TRUE if the media is marked read-only otherwise, FALSE.
  /// This field shows the read-only status as of the most recent WriteBlocks () call.
  ///
  BOOLEAN ReadOnly;
  
  ///
  /// TRUE if the WriteBlock () function caches write data.
  ///
  BOOLEAN WriteCaching; 
  
  ///
  /// The intrinsic block size of the device. If the media changes, then
  /// this field is updated.  
  ///
  UINT32  BlockSize; 
  
  ///
  /// Supplies the alignment requirement for any buffer to read or write block(s).
  ///
  UINT32  IoAlign; 
  
  ///
  /// The last logical block address on the device.
  /// If the media changes, then this field is updated. 
  ///
  EFI_LBA LastBlock; 
} EFI_BLOCK_IO_MEDIA;

#define EFI_BLOCK_IO_PROTOCOL_REVISION  0x00010000

///
/// Revision defined in EFI1.1.
/// 
#define EFI_BLOCK_IO_INTERFACE_REVISION   EFI_BLOCK_IO_PROTOCOL_REVISION

///
///  This protocol provides control over block devices.
///
struct _EFI_BLOCK_IO_PROTOCOL {
  ///
  /// The revision to which the block IO interface adheres. All future
  /// revisions must be backwards compatible. If a future version is not
  /// back wards compatible, it is not the same GUID.
  ///
  UINT64              Revision;
  ///
  /// Pointer to the EFI_BLOCK_IO_MEDIA data for this device.
  ///
  EFI_BLOCK_IO_MEDIA  *Media;

  EFI_BLOCK_RESET     Reset;
  EFI_BLOCK_READ      ReadBlocks;
  EFI_BLOCK_WRITE     WriteBlocks;
  EFI_BLOCK_FLUSH     FlushBlocks;

};

extern EFI_GUID gEfiBlockIoProtocolGuid;

#endif