audk/OvmfPkg/Csm/LegacyBiosDxe/LegacyBiosInterface.h

1461 lines
42 KiB
C
Raw Normal View History

/** @file
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#ifndef _LEGACY_BIOS_INTERFACE_
#define _LEGACY_BIOS_INTERFACE_
#include <FrameworkDxe.h>
#include <IndustryStandard/Pci.h>
#include <IndustryStandard/SmBios.h>
#include <IndustryStandard/Acpi10.h>
#include <Guid/SmBios.h>
#include <Guid/Acpi.h>
#include <Guid/DxeServices.h>
#include <Guid/LegacyBios.h>
#include <Guid/StatusCodeDataTypeId.h>
#include <Guid/ImageAuthentication.h>
#include <Protocol/BlockIo.h>
#include <Protocol/LoadedImage.h>
#include <Protocol/PciIo.h>
#include <Protocol/Cpu.h>
#include <Protocol/Timer.h>
#include <Protocol/IsaIo.h>
#include <Protocol/LegacyRegion2.h>
#include <Protocol/SimpleTextIn.h>
#include <Protocol/LegacyInterrupt.h>
#include <Protocol/LegacyBios.h>
#include <Protocol/DiskInfo.h>
#include <Protocol/GenericMemoryTest.h>
#include <Protocol/LegacyBiosPlatform.h>
#include <Protocol/DevicePath.h>
#include <Protocol/Legacy8259.h>
#include <Protocol/PciRootBridgeIo.h>
#include <Protocol/SerialIo.h>
#include <Protocol/SuperIo.h>
#include <Protocol/IoMmu.h>
#include <Library/BaseLib.h>
#include <Library/DebugLib.h>
#include <Library/UefiLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/ReportStatusCodeLib.h>
#include <Library/UefiRuntimeServicesTableLib.h>
#include <Library/HobLib.h>
#include <Library/UefiDriverEntryPoint.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/IoLib.h>
#include <Library/PcdLib.h>
#include <Library/DevicePathLib.h>
#include <Library/DxeServicesTableLib.h>
#include <Library/DebugAgentLib.h>
//
// BUGBUG: This entry maybe changed to PCD in future and wait for
// redesign of BDS library
//
#define MAX_BBS_ENTRIES 0x100
//
// Thunk Status Codes
// (These apply only to errors with the thunk and not to the code that was
// thunked to.)
//
#define THUNK_OK 0x00
#define THUNK_ERR_A20_UNSUP 0x01
#define THUNK_ERR_A20_FAILED 0x02
//
// Vector base definitions
//
//
// 8259 Hardware definitions
//
#define LEGACY_MODE_BASE_VECTOR_MASTER 0x08
#define LEGACY_MODE_BASE_VECTOR_SLAVE 0x70
//
// The original PC used INT8-F for master PIC. Since these mapped over
// processor exceptions TIANO moved the master PIC to INT68-6F.
//
// The vector base for slave PIC is set as 0x70 for PC-AT compatibility.
//
#define PROTECTED_MODE_BASE_VECTOR_MASTER 0x68
#define PROTECTED_MODE_BASE_VECTOR_SLAVE 0x70
//
// When we call CSM16 functions, some CSM16 use es:[offset + 0xabcd] to get data passed from CSM32,
// offset + 0xabcd could overflow which exceeds 0xFFFF which is invalid in real mode.
// So this will keep offset as small as possible to avoid offset overflow in real mode.
//
#define NORMALIZE_EFI_SEGMENT(_Adr) (UINT16) (((UINTN) (_Adr)) >> 4)
#define NORMALIZE_EFI_OFFSET(_Adr) (UINT16) (((UINT16) ((UINTN) (_Adr))) & 0xf)
//
// Trace defines
//
//
#define LEGACY_BDA_TRACE 0x000
#define LEGACY_BIOS_TRACE 0x040
#define LEGACY_BOOT_TRACE 0x080
#define LEGACY_CMOS_TRACE 0x0C0
#define LEGACY_IDE_TRACE 0x100
#define LEGACY_MP_TRACE 0x140
#define LEGACY_PCI_TRACE 0x180
#define LEGACY_SIO_TRACE 0x1C0
#define LEGACY_PCI_TRACE_000 LEGACY_PCI_TRACE + 0x00
#define LEGACY_PCI_TRACE_001 LEGACY_PCI_TRACE + 0x01
#define LEGACY_PCI_TRACE_002 LEGACY_PCI_TRACE + 0x02
#define LEGACY_PCI_TRACE_003 LEGACY_PCI_TRACE + 0x03
#define LEGACY_PCI_TRACE_004 LEGACY_PCI_TRACE + 0x04
#define LEGACY_PCI_TRACE_005 LEGACY_PCI_TRACE + 0x05
#define LEGACY_PCI_TRACE_006 LEGACY_PCI_TRACE + 0x06
#define LEGACY_PCI_TRACE_007 LEGACY_PCI_TRACE + 0x07
#define LEGACY_PCI_TRACE_008 LEGACY_PCI_TRACE + 0x08
#define LEGACY_PCI_TRACE_009 LEGACY_PCI_TRACE + 0x09
#define LEGACY_PCI_TRACE_00A LEGACY_PCI_TRACE + 0x0A
#define LEGACY_PCI_TRACE_00B LEGACY_PCI_TRACE + 0x0B
#define LEGACY_PCI_TRACE_00C LEGACY_PCI_TRACE + 0x0C
#define LEGACY_PCI_TRACE_00D LEGACY_PCI_TRACE + 0x0D
#define LEGACY_PCI_TRACE_00E LEGACY_PCI_TRACE + 0x0E
#define LEGACY_PCI_TRACE_00F LEGACY_PCI_TRACE + 0x0F
#define BDA_VIDEO_MODE 0x49
#define IDE_PI_REGISTER_PNE BIT0
#define IDE_PI_REGISTER_SNE BIT2
typedef struct {
UINTN PciSegment;
UINTN PciBus;
UINTN PciDevice;
UINTN PciFunction;
UINT32 ShadowAddress;
UINT32 ShadowedSize;
UINT8 DiskStart;
UINT8 DiskEnd;
} ROM_INSTANCE_ENTRY;
//
// Values for RealModeGdt
//
#if defined (MDE_CPU_IA32)
#define NUM_REAL_GDT_ENTRIES 3
#define CONVENTIONAL_MEMORY_TOP 0xA0000 // 640 KB
#define INITIAL_VALUE_BELOW_1K 0x0
#elif defined (MDE_CPU_X64)
#define NUM_REAL_GDT_ENTRIES 8
#define CONVENTIONAL_MEMORY_TOP 0xA0000 // 640 KB
#define INITIAL_VALUE_BELOW_1K 0x0
#endif
#pragma pack(1)
//
// Define what a processor GDT looks like
//
typedef struct {
UINT32 LimitLo : 16;
UINT32 BaseLo : 16;
UINT32 BaseMid : 8;
UINT32 Type : 4;
UINT32 System : 1;
UINT32 Dpl : 2;
UINT32 Present : 1;
UINT32 LimitHi : 4;
UINT32 Software : 1;
UINT32 Reserved : 1;
UINT32 DefaultSize : 1;
UINT32 Granularity : 1;
UINT32 BaseHi : 8;
} GDT32;
typedef struct {
UINT16 LimitLow;
UINT16 BaseLow;
UINT8 BaseMid;
UINT8 Attribute;
UINT8 LimitHi;
UINT8 BaseHi;
} GDT64;
//
// Define what a processor descriptor looks like
// This data structure must be kept in sync with ASM STRUCT in Thunk.inc
//
typedef struct {
UINT16 Limit;
UINT64 Base;
} DESCRIPTOR64;
typedef struct {
UINT16 Limit;
UINT32 Base;
} DESCRIPTOR32;
//
// Low stub lay out
//
#define LOW_STACK_SIZE (8 * 1024) // 8k?
#define EFI_MAX_E820_ENTRY 100
#define FIRST_INSTANCE 1
#define NOT_FIRST_INSTANCE 0
#if defined (MDE_CPU_IA32)
typedef struct {
//
// Space for the code
// The address of Code is also the beginning of the relocated Thunk code
//
CHAR8 Code[4096]; // ?
//
// The address of the Reverse Thunk code
// Note that this member CONTAINS the address of the relocated reverse thunk
// code unlike the member variable 'Code', which IS the address of the Thunk
// code.
//
UINT32 LowReverseThunkStart;
//
// Data for the code (cs releative)
//
DESCRIPTOR32 GdtDesc; // Protected mode GDT
DESCRIPTOR32 IdtDesc; // Protected mode IDT
UINT32 FlatSs;
UINT32 FlatEsp;
UINT32 LowCodeSelector; // Low code selector in GDT
UINT32 LowDataSelector; // Low data selector in GDT
UINT32 LowStack;
DESCRIPTOR32 RealModeIdtDesc;
//
// real-mode GDT (temporary GDT with two real mode segment descriptors)
//
GDT32 RealModeGdt[NUM_REAL_GDT_ENTRIES];
DESCRIPTOR32 RealModeGdtDesc;
//
// Members specifically for the reverse thunk
// The RevReal* members are used to store the current state of real mode
// before performing the reverse thunk. The RevFlat* members must be set
// before calling the reverse thunk assembly code.
//
UINT16 RevRealDs;
UINT16 RevRealSs;
UINT32 RevRealEsp;
DESCRIPTOR32 RevRealIdtDesc;
UINT16 RevFlatDataSelector; // Flat data selector in GDT
UINT32 RevFlatStack;
//
// A low memory stack
//
CHAR8 Stack[LOW_STACK_SIZE];
//
// Stack for flat mode after reverse thunk
// @bug - This may no longer be necessary if the reverse thunk interface
// is changed to have the flat stack in a different location.
//
CHAR8 RevThunkStack[LOW_STACK_SIZE];
//
// Legacy16 Init memory map info
//
EFI_TO_COMPATIBILITY16_INIT_TABLE EfiToLegacy16InitTable;
EFI_TO_COMPATIBILITY16_BOOT_TABLE EfiToLegacy16BootTable;
CHAR8 InterruptRedirectionCode[32];
EFI_LEGACY_INSTALL_PCI_HANDLER PciHandler;
EFI_DISPATCH_OPROM_TABLE DispatchOpromTable;
BBS_TABLE BbsTable[MAX_BBS_ENTRIES];
} LOW_MEMORY_THUNK;
#elif defined (MDE_CPU_X64)
typedef struct {
//
// Space for the code
// The address of Code is also the beginning of the relocated Thunk code
//
CHAR8 Code[4096]; // ?
//
// Data for the code (cs releative)
//
DESCRIPTOR64 X64GdtDesc; // Protected mode GDT
DESCRIPTOR64 X64IdtDesc; // Protected mode IDT
UINTN X64Ss;
UINTN X64Esp;
UINTN RealStack;
DESCRIPTOR32 RealModeIdtDesc;
DESCRIPTOR32 RealModeGdtDesc;
//
// real-mode GDT (temporary GDT with two real mode segment descriptors)
//
GDT64 RealModeGdt[NUM_REAL_GDT_ENTRIES];
UINT64 PageMapLevel4;
//
// A low memory stack
//
CHAR8 Stack[LOW_STACK_SIZE];
//
// Legacy16 Init memory map info
//
EFI_TO_COMPATIBILITY16_INIT_TABLE EfiToLegacy16InitTable;
EFI_TO_COMPATIBILITY16_BOOT_TABLE EfiToLegacy16BootTable;
CHAR8 InterruptRedirectionCode[32];
EFI_LEGACY_INSTALL_PCI_HANDLER PciHandler;
EFI_DISPATCH_OPROM_TABLE DispatchOpromTable;
BBS_TABLE BbsTable[MAX_BBS_ENTRIES];
} LOW_MEMORY_THUNK;
#endif
//
// PnP Expansion Header
//
typedef struct {
UINT32 PnpSignature;
UINT8 Revision;
UINT8 Length;
UINT16 NextHeader;
UINT8 Reserved1;
UINT8 Checksum;
UINT32 DeviceId;
UINT16 MfgPointer;
UINT16 ProductNamePointer;
UINT8 Class;
UINT8 SubClass;
UINT8 Interface;
UINT8 DeviceIndicators;
UINT16 Bcv;
UINT16 DisconnectVector;
UINT16 Bev;
UINT16 Reserved2;
UINT16 StaticResourceVector;
} LEGACY_PNP_EXPANSION_HEADER;
typedef struct {
UINT8 PciSegment;
UINT8 PciBus;
UINT8 PciDevice;
UINT8 PciFunction;
UINT16 Vid;
UINT16 Did;
UINT16 SysSid;
UINT16 SVid;
UINT8 Class;
UINT8 SubClass;
UINT8 Interface;
UINT8 Reserved;
UINTN RomStart;
UINTN ManufacturerString;
UINTN ProductNameString;
} LEGACY_ROM_AND_BBS_TABLE;
//
// Structure how EFI has mapped a devices HDD drive numbers.
// Boot to EFI aware OS or shell requires this mapping when
// 16-bit CSM assigns drive numbers.
// This mapping is ignored booting to a legacy OS.
//
typedef struct {
UINT8 PciSegment;
UINT8 PciBus;
UINT8 PciDevice;
UINT8 PciFunction;
UINT8 StartDriveNumber;
UINT8 EndDriveNumber;
} LEGACY_EFI_HDD_TABLE;
//
// This data is passed to Leacy16Boot
//
typedef enum {
EfiAcpiAddressRangeMemory = 1,
EfiAcpiAddressRangeReserved = 2,
EfiAcpiAddressRangeACPI = 3,
EfiAcpiAddressRangeNVS = 4,
EfiAddressRangePersistentMemory = 7
} EFI_ACPI_MEMORY_TYPE;
typedef struct {
UINT64 BaseAddr;
UINT64 Length;
EFI_ACPI_MEMORY_TYPE Type;
} EFI_E820_ENTRY64;
typedef struct {
UINT32 BassAddrLow;
UINT32 BaseAddrHigh;
UINT32 LengthLow;
UINT32 LengthHigh;
EFI_ACPI_MEMORY_TYPE Type;
} EFI_E820_ENTRY;
#pragma pack()
extern BBS_TABLE *mBbsTable;
extern EFI_GENERIC_MEMORY_TEST_PROTOCOL *gGenMemoryTest;
extern BOOLEAN mEndOfDxe;
#define PORT_70 0x70
#define PORT_71 0x71
#define CMOS_0A 0x0a ///< Status register A
#define CMOS_0D 0x0d ///< Status register D
#define CMOS_0E 0x0e ///< Diagnostic Status
#define CMOS_0F 0x0f ///< Shutdown status
#define CMOS_10 0x10 ///< Floppy type
#define CMOS_12 0x12 ///< IDE type
#define CMOS_14 0x14 ///< Same as BDA 40:10
#define CMOS_15 0x15 ///< Low byte of base memory in 1k increments
#define CMOS_16 0x16 ///< High byte of base memory in 1k increments
#define CMOS_17 0x17 ///< Low byte of 1MB+ memory in 1k increments - max 15 MB
#define CMOS_18 0x18 ///< High byte of 1MB+ memory in 1k increments - max 15 MB
#define CMOS_19 0x19 ///< C: extended drive type
#define CMOS_1A 0x1a ///< D: extended drive type
#define CMOS_2E 0x2e ///< Most significient byte of standard checksum
#define CMOS_2F 0x2f ///< Least significient byte of standard checksum
#define CMOS_30 0x30 ///< CMOS 0x17
#define CMOS_31 0x31 ///< CMOS 0x18
#define CMOS_32 0x32 ///< Century byte
//
// 8254 Timer registers
//
#define TIMER0_COUNT_PORT 0x40
#define TIMER1_COUNT_PORT 0x41
#define TIMER2_COUNT_PORT 0x42
#define TIMER_CONTROL_PORT 0x43
//
// Timer 0, Read/Write LSB then MSB, Square wave output, binary count use.
//
#define TIMER0_CONTROL_WORD 0x36
#define LEGACY_BIOS_INSTANCE_SIGNATURE SIGNATURE_32 ('L', 'B', 'I', 'T')
typedef struct {
UINTN Signature;
EFI_HANDLE Handle;
EFI_LEGACY_BIOS_PROTOCOL LegacyBios;
EFI_HANDLE ImageHandle;
//
// CPU Architectural Protocol
//
EFI_CPU_ARCH_PROTOCOL *Cpu;
//
// Timer Architectural Protocol
//
EFI_TIMER_ARCH_PROTOCOL *Timer;
BOOLEAN TimerUses8254;
//
// Protocol to Lock and Unlock 0xc0000 - 0xfffff
//
EFI_LEGACY_REGION2_PROTOCOL *LegacyRegion;
EFI_LEGACY_BIOS_PLATFORM_PROTOCOL *LegacyBiosPlatform;
//
// Interrupt control for thunk and PCI IRQ
//
EFI_LEGACY_8259_PROTOCOL *Legacy8259;
//
// PCI Interrupt PIRQ control
//
EFI_LEGACY_INTERRUPT_PROTOCOL *LegacyInterrupt;
//
// Generic Memory Test
//
EFI_GENERIC_MEMORY_TEST_PROTOCOL *GenericMemoryTest;
//
// TRUE if PCI Interrupt Line registers have been programmed.
//
BOOLEAN PciInterruptLine;
//
// Code space below 1MB needed by thunker to transition to real mode.
// Contains stack and real mode code fragments
//
LOW_MEMORY_THUNK *IntThunk;
//
// Starting shadow address of the Legacy BIOS
//
UINT32 BiosStart;
UINT32 LegacyBiosImageSize;
//
// Start of variables used by CsmItp.mac ITP macro file and/os LegacyBios
//
UINT8 Dump[4];
//
// $EFI Legacy16 code entry info in memory < 1 MB;
//
EFI_COMPATIBILITY16_TABLE *Legacy16Table;
VOID *Legacy16InitPtr;
VOID *Legacy16BootPtr;
VOID *InternalIrqRoutingTable;
UINT32 NumberIrqRoutingEntries;
VOID *BbsTablePtr;
VOID *HddTablePtr;
UINT32 NumberHddControllers;
//
// Cached copy of Legacy16 entry point
//
UINT16 Legacy16CallSegment;
UINT16 Legacy16CallOffset;
//
// Returned from $EFI and passed in to OPROMS
//
UINT16 PnPInstallationCheckSegment;
UINT16 PnPInstallationCheckOffset;
//
// E820 table
//
EFI_E820_ENTRY E820Table[EFI_MAX_E820_ENTRY];
UINT32 NumberE820Entries;
//
// True if legacy VGA INT 10h handler installed
//
BOOLEAN VgaInstalled;
//
// Number of IDE drives
//
UINT8 IdeDriveCount;
//
// Current Free Option ROM space. An option ROM must NOT go past
// BiosStart.
//
UINT32 OptionRom;
//
// Save Legacy16 unexpected interrupt vector. Reprogram INT 68-6F from
// EFI values to legacy value just before boot.
//
UINT32 BiosUnexpectedInt;
UINT32 ThunkSavedInt[8];
UINT16 ThunkSeg;
LEGACY_EFI_HDD_TABLE *LegacyEfiHddTable;
UINT16 LegacyEfiHddTableIndex;
UINT8 DiskEnd;
UINT8 Disk4075;
UINT16 TraceIndex;
UINT16 Trace[0x200];
//
// Indicate that whether GenericLegacyBoot is entered or not
//
BOOLEAN LegacyBootEntered;
//
// CSM16 PCI Interface Version
//
UINT16 Csm16PciInterfaceVersion;
} LEGACY_BIOS_INSTANCE;
#pragma pack(1)
/*
40:00-01 Com1
40:02-03 Com2
40:04-05 Com3
40:06-07 Com4
40:08-09 Lpt1
40:0A-0B Lpt2
40:0C-0D Lpt3
40:0E-0E Ebda segment
40:10-11 MachineConfig
40:12 Bda12 - skip
40:13-14 MemSize below 1MB
40:15-16 Bda15_16 - skip
40:17 Keyboard Shift status
40:18-19 Bda18_19 - skip
40:1A-1B Key buffer head
40:1C-1D Key buffer tail
40:1E-3D Bda1E_3D- key buffer -skip
40:3E-3F FloppyData 3E = Calibration status 3F = Motor status
40:40 FloppyTimeout
40:41-74 Bda41_74 - skip
40:75 Number of HDD drives
40:76-77 Bda76_77 - skip
40:78-79 78 = Lpt1 timeout, 79 = Lpt2 timeout
40:7A-7B 7A = Lpt3 timeout, 7B = Lpt4 timeout
40:7C-7D 7C = Com1 timeout, 7D = Com2 timeout
40:7E-7F 7E = Com3 timeout, 7F = Com4 timeout
40:80-81 Pointer to start of key buffer
40:82-83 Pointer to end of key buffer
40:84-87 Bda84_87 - skip
40:88 HDD Data Xmit rate
40:89-8f skip
40:90 Floppy data rate
40:91-95 skip
40:96 Keyboard Status
40:97 LED Status
40:98-101 skip
*/
typedef struct {
UINT16 Com1;
UINT16 Com2;
UINT16 Com3;
UINT16 Com4;
UINT16 Lpt1;
UINT16 Lpt2;
UINT16 Lpt3;
UINT16 Ebda;
UINT16 MachineConfig;
UINT8 Bda12;
UINT16 MemSize;
UINT8 Bda15_16[0x02];
UINT8 ShiftStatus;
UINT8 Bda18_19[0x02];
UINT16 KeyHead;
UINT16 KeyTail;
UINT16 Bda1E_3D[0x10];
UINT16 FloppyData;
UINT8 FloppyTimeout;
UINT8 Bda41_74[0x34];
UINT8 NumberOfDrives;
UINT8 Bda76_77[0x02];
UINT16 Lpt1_2Timeout;
UINT16 Lpt3_4Timeout;
UINT16 Com1_2Timeout;
UINT16 Com3_4Timeout;
UINT16 KeyStart;
UINT16 KeyEnd;
UINT8 Bda84_87[0x4];
UINT8 DataXmit;
UINT8 Bda89_8F[0x07];
UINT8 FloppyXRate;
UINT8 Bda91_95[0x05];
UINT8 KeyboardStatus;
UINT8 LedStatus;
} BDA_STRUC;
#pragma pack()
#define LEGACY_BIOS_INSTANCE_FROM_THIS(this) CR (this, LEGACY_BIOS_INSTANCE, LegacyBios, LEGACY_BIOS_INSTANCE_SIGNATURE)
/**
Thunk to 16-bit real mode and execute a software interrupt with a vector
of BiosInt. Regs will contain the 16-bit register context on entry and
exit.
@param This Protocol instance pointer.
@param BiosInt Processor interrupt vector to invoke
@param Regs Register contexted passed into (and returned) from thunk to
16-bit mode
@retval FALSE Thunk completed, and there were no BIOS errors in the target code.
See Regs for status.
@retval TRUE There was a BIOS erro in the target code.
**/
BOOLEAN
EFIAPI
LegacyBiosInt86 (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN UINT8 BiosInt,
IN EFI_IA32_REGISTER_SET *Regs
);
/**
Thunk to 16-bit real mode and call Segment:Offset. Regs will contain the
16-bit register context on entry and exit. Arguments can be passed on
the Stack argument
@param This Protocol instance pointer.
@param Segment Segment of 16-bit mode call
@param Offset Offset of 16-bit mdoe call
@param Regs Register contexted passed into (and returned) from
thunk to 16-bit mode
@param Stack Caller allocated stack used to pass arguments
@param StackSize Size of Stack in bytes
@retval FALSE Thunk completed, and there were no BIOS errors in
the target code. See Regs for status.
@retval TRUE There was a BIOS erro in the target code.
**/
BOOLEAN
EFIAPI
LegacyBiosFarCall86 (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN UINT16 Segment,
IN UINT16 Offset,
IN EFI_IA32_REGISTER_SET *Regs,
IN VOID *Stack,
IN UINTN StackSize
);
/**
Test to see if a legacy PCI ROM exists for this device. Optionally return
the Legacy ROM instance for this PCI device.
@param This Protocol instance pointer.
@param PciHandle The PCI PC-AT OPROM from this devices ROM BAR will
be loaded
@param RomImage Return the legacy PCI ROM for this device
@param RomSize Size of ROM Image
@param Flags Indicates if ROM found and if PC-AT.
@retval EFI_SUCCESS Legacy Option ROM available for this device
@retval EFI_UNSUPPORTED Legacy Option ROM not supported.
**/
EFI_STATUS
EFIAPI
LegacyBiosCheckPciRom (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN EFI_HANDLE PciHandle,
OUT VOID **RomImage, OPTIONAL
OUT UINTN *RomSize, OPTIONAL
OUT UINTN *Flags
);
/**
Assign drive number to legacy HDD drives prior to booting an EFI
aware OS so the OS can access drives without an EFI driver.
Note: BBS compliant drives ARE NOT available until this call by
either shell or EFI.
@param This Protocol instance pointer.
@param BbsCount Number of BBS_TABLE structures
@param BbsTable List BBS entries
@retval EFI_SUCCESS Drive numbers assigned
**/
EFI_STATUS
EFIAPI
LegacyBiosPrepareToBootEfi (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
OUT UINT16 *BbsCount,
OUT BBS_TABLE **BbsTable
);
/**
To boot from an unconventional device like parties and/or execute
HDD diagnostics.
@param This Protocol instance pointer.
@param Attributes How to interpret the other input parameters
@param BbsEntry The 0-based index into the BbsTable for the parent
device.
@param BeerData Pointer to the 128 bytes of ram BEER data.
@param ServiceAreaData Pointer to the 64 bytes of raw Service Area data.
The caller must provide a pointer to the specific
Service Area and not the start all Service Areas.
EFI_INVALID_PARAMETER if error. Does NOT return if no error.
**/
EFI_STATUS
EFIAPI
LegacyBiosBootUnconventionalDevice (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN UDC_ATTRIBUTES Attributes,
IN UINTN BbsEntry,
IN VOID *BeerData,
IN VOID *ServiceAreaData
);
/**
Load a legacy PC-AT OPROM on the PciHandle device. Return information
about how many disks were added by the OPROM and the shadow address and
size. DiskStart & DiskEnd are INT 13h drive letters. Thus 0x80 is C:
@param This Protocol instance pointer.
@param PciHandle The PCI PC-AT OPROM from this devices ROM BAR will
be loaded. This value is NULL if RomImage is
non-NULL. This is the normal case.
@param RomImage A PCI PC-AT ROM image. This argument is non-NULL
if there is no hardware associated with the ROM
and thus no PciHandle, otherwise is must be NULL.
Example is PXE base code.
@param Flags Indicates if ROM found and if PC-AT.
@param DiskStart Disk number of first device hooked by the ROM. If
DiskStart is the same as DiskEnd no disked were
hooked.
@param DiskEnd Disk number of the last device hooked by the ROM.
@param RomShadowAddress Shadow address of PC-AT ROM
@param RomShadowedSize Size of RomShadowAddress in bytes
@retval EFI_SUCCESS Legacy ROM loaded for this device
@retval EFI_INVALID_PARAMETER PciHandle not found
@retval EFI_UNSUPPORTED There is no PCI ROM in the ROM BAR or no onboard
ROM
**/
EFI_STATUS
EFIAPI
LegacyBiosInstallPciRom (
IN EFI_LEGACY_BIOS_PROTOCOL * This,
IN EFI_HANDLE PciHandle,
IN VOID **RomImage,
OUT UINTN *Flags,
OUT UINT8 *DiskStart, OPTIONAL
OUT UINT8 *DiskEnd, OPTIONAL
OUT VOID **RomShadowAddress, OPTIONAL
OUT UINT32 *RomShadowedSize OPTIONAL
);
/**
Fill in the standard BDA for Keyboard LEDs
@param This Protocol instance pointer.
@param Leds Current LED status
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
EFIAPI
LegacyBiosUpdateKeyboardLedStatus (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN UINT8 Leds
);
/**
Get all BBS info
@param This Protocol instance pointer.
@param HddCount Number of HDD_INFO structures
@param HddInfo Onboard IDE controller information
@param BbsCount Number of BBS_TABLE structures
@param BbsTable List BBS entries
@retval EFI_SUCCESS Tables returned
@retval EFI_NOT_FOUND resource not found
@retval EFI_DEVICE_ERROR can not get BBS table
**/
EFI_STATUS
EFIAPI
LegacyBiosGetBbsInfo (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
OUT UINT16 *HddCount,
OUT HDD_INFO **HddInfo,
OUT UINT16 *BbsCount,
OUT BBS_TABLE **BbsTable
);
/**
Shadow all legacy16 OPROMs that haven't been shadowed.
Warning: Use this with caution. This routine disconnects all EFI
drivers. If used externally then caller must re-connect EFI
drivers.
@param This Protocol instance pointer.
@retval EFI_SUCCESS OPROMs shadowed
**/
EFI_STATUS
EFIAPI
LegacyBiosShadowAllLegacyOproms (
IN EFI_LEGACY_BIOS_PROTOCOL *This
);
/**
Attempt to legacy boot the BootOption. If the EFI contexted has been
compromised this function will not return.
@param This Protocol instance pointer.
@param BbsDevicePath EFI Device Path from BootXXXX variable.
@param LoadOptionsSize Size of LoadOption in size.
@param LoadOptions LoadOption from BootXXXX variable
@retval EFI_SUCCESS Removable media not present
**/
EFI_STATUS
EFIAPI
LegacyBiosLegacyBoot (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN BBS_BBS_DEVICE_PATH *BbsDevicePath,
IN UINT32 LoadOptionsSize,
IN VOID *LoadOptions
);
/**
Allocate memory < 1 MB and copy the thunker code into low memory. Se up
all the descriptors.
@param Private Private context for Legacy BIOS
@retval EFI_SUCCESS Should only pass.
**/
EFI_STATUS
LegacyBiosInitializeThunk (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Fill in the standard BDA and EBDA stuff before Legacy16 load
@param Private Legacy BIOS Instance data
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
LegacyBiosInitBda (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Collect IDE Inquiry data from the IDE disks
@param Private Legacy BIOS Instance data
@param HddInfo Hdd Information
@param Flag Reconnect IdeController or not
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
LegacyBiosBuildIdeData (
IN LEGACY_BIOS_INSTANCE *Private,
IN HDD_INFO **HddInfo,
IN UINT16 Flag
);
/**
Enable ide controller. This gets disabled when LegacyBoot.c is about
to run the Option ROMs.
@param Private Legacy BIOS Instance data
**/
VOID
EnableIdeController (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
If the IDE channel is in compatibility (legacy) mode, remove all
PCI I/O BAR addresses from the controller.
@param IdeController The handle of target IDE controller
**/
VOID
InitLegacyIdeController (
IN EFI_HANDLE IdeController
);
/**
Program the interrupt routing register in all the PCI devices. On a PC AT system
this register contains the 8259 IRQ vector that matches its PCI interrupt.
@param Private Legacy BIOS Instance data
@retval EFI_SUCCESS Succeed.
@retval EFI_ALREADY_STARTED All PCI devices have been processed.
**/
EFI_STATUS
PciProgramAllInterruptLineRegisters (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Collect EFI Info about legacy devices.
@param Private Legacy BIOS Instance data
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
LegacyBiosBuildSioData (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Shadow all the PCI legacy ROMs. Use data from the Legacy BIOS Protocol
to chose the order. Skip any devices that have already have legacy
BIOS run.
@param Private Protocol instance pointer.
@retval EFI_SUCCESS Succeed.
@retval EFI_UNSUPPORTED Cannot get VGA device handle.
**/
EFI_STATUS
PciShadowRoms (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Fill in the standard BDA and EBDA stuff prior to legacy Boot
@param Private Legacy BIOS Instance data
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
LegacyBiosCompleteBdaBeforeBoot (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Fill in the standard CMOS stuff before Legacy16 load
@param Private Legacy BIOS Instance data
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
LegacyBiosInitCmos (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Fill in the standard CMOS stuff prior to legacy Boot
@param Private Legacy BIOS Instance data
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
LegacyBiosCompleteStandardCmosBeforeBoot (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Contains the code that is copied into low memory (below 640K).
This code reflects interrupts 0x68-0x6f to interrupts 0x08-0x0f.
This template must be copied into low memory, and the IDT entries
0x68-0x6F must be point to the low memory copy of this code. Each
entry is 4 bytes long, so IDT entries 0x68-0x6F can be easily
computed.
**/
VOID
InterruptRedirectionTemplate (
VOID
);
/**
Build the E820 table.
@param Private Legacy BIOS Instance data
@param Size Size of E820 Table
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
LegacyBiosBuildE820 (
IN LEGACY_BIOS_INSTANCE *Private,
OUT UINTN *Size
);
/**
This function is to put all AP in halt state.
@param Private Legacy BIOS Instance data
**/
VOID
ShutdownAPs (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Worker function for LegacyBiosGetFlatDescs, retrieving content of
specific registers.
@param IntThunk Pointer to IntThunk of Legacy BIOS context.
**/
VOID
GetRegisters (
LOW_MEMORY_THUNK *IntThunk
);
/**
Routine for calling real thunk code.
@param RealCode The address of thunk code.
@param BiosInt The Bios interrupt vector number.
@param CallAddress The address of 16-bit mode call.
@return Status returned by real thunk code
**/
UINTN
CallRealThunkCode (
UINT8 *RealCode,
UINT8 BiosInt,
UINT32 CallAddress
);
/**
Routine for generating soft interrupt.
@param Vector The interrupt vector number.
**/
VOID
GenerateSoftInit (
UINT8 Vector
);
/**
Allocate memory for legacy usage.
@param AllocateType The type of allocation to perform.
@param MemoryType The type of memory to allocate.
@param StartPageAddress Start address of range
@param Pages Number of pages to allocate
@param Result Result of allocation
@retval EFI_SUCCESS Legacy16 code loaded
@retval Other No protocol installed, unload driver.
**/
EFI_STATUS
AllocateLegacyMemory (
IN EFI_ALLOCATE_TYPE AllocateType,
IN EFI_MEMORY_TYPE MemoryType,
IN EFI_PHYSICAL_ADDRESS StartPageAddress,
IN UINTN Pages,
OUT EFI_PHYSICAL_ADDRESS *Result
);
/**
Get a region from the LegacyBios for Tiano usage. Can only be invoked once.
@param This Protocol instance pointer.
@param LegacyMemorySize Size of required region
@param Region Region to use. 00 = Either 0xE0000 or 0xF0000
block Bit0 = 1 0xF0000 block Bit1 = 1 0xE0000
block
@param Alignment Address alignment. Bit mapped. First non-zero
bit from right is alignment.
@param LegacyMemoryAddress Region Assigned
@retval EFI_SUCCESS Region assigned
@retval EFI_ACCESS_DENIED Procedure previously invoked
@retval Other Region not assigned
**/
EFI_STATUS
EFIAPI
LegacyBiosGetLegacyRegion (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN UINTN LegacyMemorySize,
IN UINTN Region,
IN UINTN Alignment,
OUT VOID **LegacyMemoryAddress
);
/**
Get a region from the LegacyBios for Tiano usage. Can only be invoked once.
@param This Protocol instance pointer.
@param LegacyMemorySize Size of data to copy
@param LegacyMemoryAddress Legacy Region destination address Note: must
be in region assigned by
LegacyBiosGetLegacyRegion
@param LegacyMemorySourceAddress Source of data
@retval EFI_SUCCESS Region assigned
@retval EFI_ACCESS_DENIED Destination outside assigned region
**/
EFI_STATUS
EFIAPI
LegacyBiosCopyLegacyRegion (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN UINTN LegacyMemorySize,
IN VOID *LegacyMemoryAddress,
IN VOID *LegacyMemorySourceAddress
);
/**
Find Legacy16 BIOS image in the FLASH device and shadow it into memory. Find
the $EFI table in the shadow area. Thunk into the Legacy16 code after it had
been shadowed.
@param Private Legacy BIOS context data
@retval EFI_SUCCESS Legacy16 code loaded
@retval Other No protocol installed, unload driver.
**/
EFI_STATUS
ShadowAndStartLegacy16 (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Checks the state of the floppy and if media is inserted.
This routine checks the state of the floppy and if media is inserted.
There are 3 cases:
No floppy present - Set BBS entry to ignore
Floppy present & no media - Set BBS entry to lowest priority. We cannot
set it to ignore since 16-bit CSM will
indicate no floppy and thus drive A: is
unusable. CSM-16 will not try floppy since
lowest priority and thus not incur boot
time penality.
Floppy present & media - Set BBS entry to some priority.
@return State of floppy media
**/
UINT8
HasMediaInFloppy (
VOID
);
/**
Identify drive data must be updated to actual parameters before boot.
This requires updating the checksum, if it exists.
@param IdentifyDriveData ATA Identify Data
@param Checksum checksum of the ATA Identify Data
@retval EFI_SUCCESS checksum calculated
@retval EFI_SECURITY_VIOLATION IdentifyData invalid
**/
EFI_STATUS
CalculateIdentifyDriveChecksum (
IN UINT8 *IdentifyDriveData,
OUT UINT8 *Checksum
);
/**
Identify drive data must be updated to actual parameters before boot.
@param IdentifyDriveData ATA Identify Data
**/
VOID
UpdateIdentifyDriveData (
IN UINT8 *IdentifyDriveData
);
/**
Complete build of BBS TABLE.
@param Private Legacy BIOS Instance data
@param BbsTable BBS Table passed to 16-bit code
@retval EFI_SUCCESS Removable media not present
**/
EFI_STATUS
LegacyBiosBuildBbs (
IN LEGACY_BIOS_INSTANCE *Private,
IN BBS_TABLE *BbsTable
);
/**
Read CMOS register through index/data port.
@param[in] Index The index of the CMOS register to read.
@return The data value from the CMOS register specified by Index.
**/
UINT8
LegacyReadStandardCmos (
IN UINT8 Index
);
/**
Write CMOS register through index/data port.
@param[in] Index The index of the CMOS register to write.
@param[in] Value The value of CMOS register to write.
@return The value written to the CMOS register specified by Index.
**/
UINT8
LegacyWriteStandardCmos (
IN UINT8 Index,
IN UINT8 Value
);
/**
Calculate the new standard CMOS checksum and write it.
@param Private Legacy BIOS Instance data
@retval EFI_SUCCESS Calculate 16-bit checksum successfully
**/
EFI_STATUS
LegacyCalculateWriteStandardCmosChecksum (
VOID
);
/**
Test to see if a legacy PCI ROM exists for this device. Optionally return
the Legacy ROM instance for this PCI device.
@param[in] This Protocol instance pointer.
@param[in] PciHandle The PCI PC-AT OPROM from this devices ROM BAR will be loaded
@param[out] RomImage Return the legacy PCI ROM for this device
@param[out] RomSize Size of ROM Image
@param[out] RuntimeImageLength Runtime size of ROM Image
@param[out] Flags Indicates if ROM found and if PC-AT.
@param[out] OpromRevision Revision of the PCI Rom
@param[out] ConfigUtilityCodeHeaderPointer of Configuration Utility Code Header
@return EFI_SUCCESS Legacy Option ROM available for this device
@return EFI_ALREADY_STARTED This device is already managed by its Oprom
@return EFI_UNSUPPORTED Legacy Option ROM not supported.
**/
EFI_STATUS
LegacyBiosCheckPciRomEx (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN EFI_HANDLE PciHandle,
OUT VOID **RomImage, OPTIONAL
OUT UINTN *RomSize, OPTIONAL
OUT UINTN *RuntimeImageLength, OPTIONAL
OUT UINTN *Flags, OPTIONAL
OUT UINT8 *OpromRevision, OPTIONAL
OUT VOID **ConfigUtilityCodeHeader OPTIONAL
);
/**
Relocate this image under 4G memory for IPF.
@param ImageHandle Handle of driver image.
@param SystemTable Pointer to system table.
@retval EFI_SUCCESS Image successfully relocated.
@retval EFI_ABORTED Failed to relocate image.
**/
EFI_STATUS
RelocateImageUnder4GIfNeeded (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
);
/**
Thunk to 16-bit real mode and call Segment:Offset. Regs will contain the
16-bit register context on entry and exit. Arguments can be passed on
the Stack argument
@param This Protocol instance pointer.
@param Segment Segment of 16-bit mode call
@param Offset Offset of 16-bit mdoe call
@param Regs Register contexted passed into (and returned) from thunk to
16-bit mode
@param Stack Caller allocated stack used to pass arguments
@param StackSize Size of Stack in bytes
@retval FALSE Thunk completed, and there were no BIOS errors in the target code.
See Regs for status.
@retval TRUE There was a BIOS erro in the target code.
**/
BOOLEAN
EFIAPI
InternalLegacyBiosFarCall (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN UINT16 Segment,
IN UINT16 Offset,
IN EFI_IA32_REGISTER_SET *Regs,
IN VOID *Stack,
IN UINTN StackSize
);
/**
Load a legacy PC-AT OpROM for VGA controller.
@param Private Driver private data.
@retval EFI_SUCCESS Legacy ROM successfully installed for this device.
@retval EFI_DEVICE_ERROR No VGA device handle found, or native EFI video
driver cannot be successfully disconnected, or VGA
thunk driver cannot be successfully connected.
**/
EFI_STATUS
LegacyBiosInstallVgaRom (
IN LEGACY_BIOS_INSTANCE *Private
);
#endif