audk/MdeModulePkg/Bus/Pci/UhciDxe/UhciReg.c

294 lines
6.3 KiB
C
Raw Normal View History

/** @file
The UHCI register operation routines.
Copyright (c) 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "Uhci.h"
/**
Read a UHCI register.
@param PciIo The EFI_PCI_IO_PROTOCOL to use.
@param Offset Register offset to USB_BAR_INDEX.
@return Content of register.
**/
UINT16
UhciReadReg (
IN EFI_PCI_IO_PROTOCOL *PciIo,
IN UINT32 Offset
)
{
UINT16 Data;
EFI_STATUS Status;
Status = PciIo->Io.Read (
PciIo,
EfiPciIoWidthUint16,
USB_BAR_INDEX,
Offset,
1,
&Data
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "UhciReadReg: PciIo Io.Read error: %r at offset %d\n", Status, Offset));
Data = 0xFFFF;
}
return Data;
}
/**
Write data to UHCI register.
@param PciIo The EFI_PCI_IO_PROTOCOL to use.
@param Offset Register offset to USB_BAR_INDEX.
@param Data Data to write.
@return None.
**/
VOID
UhciWriteReg (
IN EFI_PCI_IO_PROTOCOL *PciIo,
IN UINT32 Offset,
IN UINT16 Data
)
{
EFI_STATUS Status;
Status = PciIo->Io.Write (
PciIo,
EfiPciIoWidthUint16,
USB_BAR_INDEX,
Offset,
1,
&Data
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "UhciWriteReg: PciIo Io.Write error: %r at offset %d\n", Status, Offset));
}
}
/**
Set a bit of the UHCI Register.
@param PciIo The EFI_PCI_IO_PROTOCOL to use.
@param Offset Register offset to USB_BAR_INDEX.
@param Bit The bit to set.
@return None.
**/
VOID
UhciSetRegBit (
IN EFI_PCI_IO_PROTOCOL *PciIo,
IN UINT32 Offset,
IN UINT16 Bit
)
{
UINT16 Data;
Data = UhciReadReg (PciIo, Offset);
Data = (UINT16) (Data |Bit);
UhciWriteReg (PciIo, Offset, Data);
}
/**
Clear a bit of the UHCI Register.
@param PciIo The PCI_IO protocol to access the PCI.
@param Offset Register offset to USB_BAR_INDEX.
@param Bit The bit to clear.
@return None.
**/
VOID
UhciClearRegBit (
IN EFI_PCI_IO_PROTOCOL *PciIo,
IN UINT32 Offset,
IN UINT16 Bit
)
{
UINT16 Data;
Data = UhciReadReg (PciIo, Offset);
Data = (UINT16) (Data & ~Bit);
UhciWriteReg (PciIo, Offset, Data);
}
/**
Clear all the interrutp status bits, these bits
are Write-Clean.
@param Uhc The UHCI device.
@return None.
**/
VOID
UhciAckAllInterrupt (
IN USB_HC_DEV *Uhc
)
{
UhciWriteReg (Uhc->PciIo, USBSTS_OFFSET, 0x3F);
//
// If current HC is halted, re-enable it. Host Controller Process Error
// is a temporary error status.
//
if (!UhciIsHcWorking (Uhc->PciIo)) {
DEBUG ((EFI_D_ERROR, "UhciAckAllInterrupt: re-enable the UHCI from system error\n"));
Uhc->Usb2Hc.SetState (&Uhc->Usb2Hc, EfiUsbHcStateOperational);
}
}
/**
Stop the host controller.
@param Uhc The UHCI device.
@param Timeout Max time allowed.
@retval EFI_SUCCESS The host controller is stopped.
@retval EFI_TIMEOUT Failed to stop the host controller.
**/
EFI_STATUS
UhciStopHc (
IN USB_HC_DEV *Uhc,
IN UINTN Timeout
)
{
UINT16 UsbSts;
UINTN Index;
UhciClearRegBit (Uhc->PciIo, USBCMD_OFFSET, USBCMD_RS);
//
// ensure the HC is in halt status after send the stop command
// Timeout is in us unit.
//
for (Index = 0; Index < (Timeout / 50) + 1; Index++) {
UsbSts = UhciReadReg (Uhc->PciIo, USBSTS_OFFSET);
if ((UsbSts & USBSTS_HCH) == USBSTS_HCH) {
return EFI_SUCCESS;
}
gBS->Stall (50);
}
return EFI_TIMEOUT;
}
/**
Check whether the host controller operates well.
@param PciIo The PCI_IO protocol to use.
@retval TRUE Host controller is working.
@retval FALSE Host controller is halted or system error.
**/
BOOLEAN
UhciIsHcWorking (
IN EFI_PCI_IO_PROTOCOL *PciIo
)
{
UINT16 UsbSts;
UsbSts = UhciReadReg (PciIo, USBSTS_OFFSET);
if ((UsbSts & (USBSTS_HCPE | USBSTS_HSE | USBSTS_HCH)) != 0) {
DEBUG ((EFI_D_ERROR, "UhciIsHcWorking: current USB state is %x\n", UsbSts));
return FALSE;
}
return TRUE;
}
/**
Set the UHCI frame list base address. It can't use
UhciWriteReg which access memory in UINT16.
@param PciIo The EFI_PCI_IO_PROTOCOL to use.
@param Addr Address to set.
@return None.
**/
VOID
UhciSetFrameListBaseAddr (
IN EFI_PCI_IO_PROTOCOL *PciIo,
IN VOID *Addr
)
{
EFI_STATUS Status;
UINT32 Data;
Data = (UINT32) ((UINTN) Addr & 0xFFFFF000);
Status = PciIo->Io.Write (
PciIo,
EfiPciIoWidthUint32,
USB_BAR_INDEX,
(UINT64) USB_FRAME_BASE_OFFSET,
1,
&Data
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "UhciSetFrameListBaseAddr: PciIo Io.Write error: %r\n", Status));
}
}
/**
Disable USB Emulation.
@param PciIo The EFI_PCI_IO_PROTOCOL protocol to use.
@return None.
**/
VOID
UhciTurnOffUsbEmulation (
IN EFI_PCI_IO_PROTOCOL *PciIo
)
{
UINT16 Command;
Command = 0;
PciIo->Pci.Write (
PciIo,
EfiPciIoWidthUint16,
USB_EMULATION_OFFSET,
1,
&Command
);
}