2011-02-01 06:41:42 +01:00
|
|
|
|
==============================================
|
|
|
|
|
|
= ARM RealView Emulation Board Documentation =
|
|
|
|
|
|
==============================================
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Howto build UEFI RealView EB for RealTime System Model
|
|
|
|
|
|
------------------------------------------------------
|
|
|
|
|
|
|
2011-07-01 22:26:17 +02:00
|
|
|
|
For Linux
|
|
|
|
|
|
---------
|
|
|
|
|
|
|
|
|
|
|
|
1. Get EDK2 from Tianocore Subversion repository
|
|
|
|
|
|
svn co https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2 edk2 --username guest
|
|
|
|
|
|
|
|
|
|
|
|
2. Get FatPkg from EDK2 SVN repository:
|
|
|
|
|
|
cd edk2
|
|
|
|
|
|
svn co https://edk2-fatdriver2.svn.sourceforge.net/svnroot/edk2-fatdriver2/trunk/FatPkg FatPkg --username guest
|
|
|
|
|
|
|
|
|
|
|
|
3. Apply BaseTools patches (BaseTools-Pending-Patches.patch combines all the currently pending BaseTools patches)
|
|
|
|
|
|
patch -p1 < ArmPlatformPkg/Documentation/patches/BaseTools-Pending-Patches.patch
|
|
|
|
|
|
|
|
|
|
|
|
4. Set up the environment. And build the EDK2<4B>s tools
|
2011-02-01 06:41:42 +01:00
|
|
|
|
export EDK_TOOLS_PATH=`pwd`/BaseTools
|
|
|
|
|
|
. edksetup.sh `pwd`/BaseTools/
|
|
|
|
|
|
make -C $EDK_TOOLS_PATH
|
|
|
|
|
|
|
2011-07-01 22:26:17 +02:00
|
|
|
|
5. Build the ARM RealView EB UEFI Firmware
|
|
|
|
|
|
build -a ARM -p ArmPlatformPkg/ArmRealViewEBPkg/ArmRealViewEb-RTSM-A8.dsc -t RVCTLINUX
|
2011-02-01 06:41:42 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Howto test UEFI RealView EB on RealTime System Model - Example Cortex A8
|
|
|
|
|
|
------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
|
|
1. Build 'ArmRealViewEb-RTSM-A8.dsc'
|
|
|
|
|
|
|
|
|
|
|
|
2. To Run ArmRealViewEbPkg on the RTSM
|
|
|
|
|
|
1. Start RealView Debugger
|
|
|
|
|
|
2. Target > "Connect to Target"
|
|
|
|
|
|
3. Add RTSM
|
|
|
|
|
|
4. Configure this new RTSM.
|
|
|
|
|
|
5. Choose CortexA8
|
|
|
|
|
|
6. Setup the 'fname' of baseboard.flashldr_0 with your FD file (eg: c:\dev\edk2\Build\ArmRealViewEb-RTSM-A8\DEBUG_RVCT\FV\ARMREALVIEWEB_EFI.fd)
|
|
|
|
|
|
7. Turn use_s8 to TRUE in baseboard.sp810_sysctrl
|
|
|
|
|
|
8. Turn uart_enable to TRUE in baseboard.uart_0
|
|
|
|
|
|
4. Connect a telnet client to the port 5000 of your localhost
|
|
|
|
|
|
5. Launch the program
|
