audk/IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBus.c

675 lines
19 KiB
C
Raw Normal View History

/**@file
Discovers all the ISA Controllers and their resources by using the ISA PnP
Protocol, produces an instance of the ISA I/O Protocol for every ISA
Controller found, loads and initializes all ISA Device Drivers, matches ISA
Device Drivers with their respective ISA Controllers in a deterministic
manner, and informs a ISA Device Driver when it is to start managing an ISA
Controller.
Copyright (c) 2006 - 2007, Intel Corporation.<BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "InternalIsaBus.h"
//
// ISA Bus Driver Global Variables
//
EFI_DRIVER_BINDING_PROTOCOL gIsaBusControllerDriver = {
IsaBusControllerDriverSupported,
IsaBusControllerDriverStart,
IsaBusControllerDriverStop,
0xa,
NULL,
NULL
};
/**
The user Entry Point for module IsaBus. The user code starts with this function.
@param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS The entry point is executed successfully.
@retval other Some error occurs when executing this entry point.
**/
EFI_STATUS
EFIAPI
InitializeIsaBus(
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
//
// Install driver model protocol(s).
//
Status = EfiLibInstallAllDriverProtocols (
ImageHandle,
SystemTable,
&gIsaBusControllerDriver,
ImageHandle,
&gIsaBusComponentName,
NULL,
NULL
);
ASSERT_EFI_ERROR (Status);
return Status;
}
EFI_STATUS
EFIAPI
IsaBusControllerDriverSupported (
IN EFI_DRIVER_BINDING_PROTOCOL * This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL * RemainingDevicePath OPTIONAL
)
/*++
Routine Description:
This function checks to see if a controller can be managed by the ISA Bus
Driver. This is done by checking to see if the controller supports the
EFI_PCI_IO_PROTOCOL protocol, and then looking at the PCI Configuration
Header to see if the device is a PCI to ISA bridge. The class code of
PCI to ISA bridge: Base class 06h, Sub class 01h Interface 00h
Arguments:
This - The EFI_DRIVER_BINDING_PROTOCOL instance.
Controller - The handle of the device to check.
RemainingDevicePath - A pointer to the remaining portion of a device path.
Returns:
EFI_SUCCESS - The device is supported by this driver.
EFI_UNSUPPORTED - The device is not supported by this driver.
--*/
{
EFI_STATUS Status;
EFI_ISA_ACPI_PROTOCOL *IsaAcpi;
//
// If RemainingDevicePath is not NULL, it should verify that the first device
// path node in RemainingDevicePath is an ACPI Device path node
//
if (RemainingDevicePath != NULL) {
if (RemainingDevicePath->Type != ACPI_DEVICE_PATH) {
return EFI_UNSUPPORTED;
} else if (RemainingDevicePath->SubType == ACPI_DP) {
if (DevicePathNodeLength (RemainingDevicePath) != sizeof (ACPI_HID_DEVICE_PATH)) {
return EFI_UNSUPPORTED;
}
} else if (RemainingDevicePath->SubType == ACPI_EXTENDED_DP) {
if (DevicePathNodeLength (RemainingDevicePath) != sizeof (ACPI_EXTENDED_HID_DEVICE_PATH)) {
return EFI_UNSUPPORTED;
}
} else {
return EFI_UNSUPPORTED;
}
}
//
// Test the existence of DEVICE_PATH protocol
//
Status = gBS->OpenProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
NULL,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_TEST_PROTOCOL
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Get the Isa Acpi protocol
//
Status = gBS->OpenProtocol (
Controller,
&gEfiIsaAcpiProtocolGuid,
(VOID **) &IsaAcpi,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (Status == EFI_ALREADY_STARTED) {
return EFI_SUCCESS;
}
if (EFI_ERROR (Status)) {
return Status;
}
gBS->CloseProtocol (
Controller,
&gEfiIsaAcpiProtocolGuid,
This->DriverBindingHandle,
Controller
);
return Status;
}
EFI_STATUS
EFIAPI
IsaBusControllerDriverStart (
IN EFI_DRIVER_BINDING_PROTOCOL * This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL * RemainingDevicePath OPTIONAL
)
/*++
Routine Description:
This function tells the ISA Bus Driver to start managing a PCI to ISA
Bridge controller.
Arguments:
This - The EFI_DRIVER_BINDING_PROTOCOL instance.
Controller - A handle to the device being started.
RemainingDevicePath - A pointer to the remaining portion of a device path.
Returns:
EFI_SUCCESS - The device was started.
EFI_UNSUPPORTED - The device is not supported.
EFI_DEVICE_ERROR - The device could not be started due to a device error.
EFI_ALREADY_STARTED - The device has already been started.
EFI_INVALID_PARAMETER - One of the parameters has an invalid value.
EFI_OUT_OF_RESOURCES - The request could not be completed due to a lack of
resources.
--*/
{
EFI_STATUS Status;
EFI_PCI_IO_PROTOCOL *PciIo;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
EFI_ISA_ACPI_PROTOCOL *IsaAcpi;
EFI_ISA_ACPI_DEVICE_ID *IsaDevice;
EFI_ISA_ACPI_RESOURCE_LIST *ResourceList;
EFI_GENERIC_MEMORY_TEST_PROTOCOL *GenMemoryTest;
//
// Local variables declaration for StatusCode reporting
//
EFI_RESOURCE_ALLOC_FAILURE_ERROR_DATA AllocFailExtendedData;
EFI_DEVICE_PATH_PROTOCOL *DevicePathData;
//
// Initialize status code structure
//
AllocFailExtendedData.DataHeader.HeaderSize = sizeof (EFI_STATUS_CODE_DATA);
AllocFailExtendedData.DataHeader.Size = sizeof (EFI_RESOURCE_ALLOC_FAILURE_ERROR_DATA) - sizeof (EFI_STATUS_CODE_DATA);
CopyMem (
&AllocFailExtendedData.DataHeader.Type,
&gEfiStatusCodeSpecificDataGuid,
sizeof (EFI_GUID)
);
//
// Open Device Path Protocol
//
Status = gBS->OpenProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
(VOID **) &ParentDevicePath,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
return Status;
}
//
// Open Pci IO Protocol
//
Status = gBS->OpenProtocol (
Controller,
&gEfiPciIoProtocolGuid,
(VOID **) &PciIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
//
// Close opened protocol
//
gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
return Status;
}
//
// Open ISA Acpi Protocol
//
Status = gBS->OpenProtocol (
Controller,
&gEfiIsaAcpiProtocolGuid,
(VOID **) &IsaAcpi,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
//
// Close opened protocol
//
gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
return Status;
}
//
// The IsaBus driver will use memory below 16M, which is not tested yet,
// so call CompatibleRangeTest to test them. Since memory below 1M should
// be reserved to CSM, and 15M~16M might be reserved for Isa hole, test 1M
// ~15M here
//
Status = gBS->LocateProtocol (
&gEfiGenericMemTestProtocolGuid,
NULL,
(VOID **) &GenMemoryTest
);
if (!EFI_ERROR (Status)) {
Status = GenMemoryTest->CompatibleRangeTest (
GenMemoryTest,
0x100000,
0xE00000
);
}
//
// Report Status Code here since we will initialize the host controller
//
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_PROGRESS_CODE,
(EFI_IO_BUS_LPC | EFI_IOB_PC_INIT),
ParentDevicePath
);
//
// first init ISA interface
//
IsaAcpi->InterfaceInit (IsaAcpi);
//
// Report Status Code here since we will enable the host controller
//
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_PROGRESS_CODE,
(EFI_IO_BUS_LPC | EFI_IOB_PC_ENABLE),
ParentDevicePath
);
//
// Create each ISA device handle in this ISA bus
//
IsaDevice = NULL;
do {
Status = IsaAcpi->DeviceEnumerate (IsaAcpi, &IsaDevice);
if (EFI_ERROR (Status)) {
break;
}
//
// Get current resource of this ISA device
//
ResourceList = NULL;
Status = IsaAcpi->GetCurResource (IsaAcpi, IsaDevice, &ResourceList);
if (EFI_ERROR (Status)) {
continue;
}
//
// Create handle for this ISA device
//
Status = IsaCreateDevice (
This,
Controller,
PciIo,
ParentDevicePath,
ResourceList,
&DevicePathData
//&AllocFailExtendedData.DevicePath
);
if (EFI_ERROR (Status)) {
continue;
}
//
// Initialize ISA device
//
IsaAcpi->InitDevice (IsaAcpi, IsaDevice);
//
// Set resources for this ISA device
//
Status = IsaAcpi->SetResource (IsaAcpi, IsaDevice, ResourceList);
//
// Report Status Code here when failed to resource conflicts
//
if (EFI_ERROR (Status) && (Status != EFI_UNSUPPORTED)) {
//
// It's hard to tell which resource conflicts
//
AllocFailExtendedData.Bar = 0;
AllocFailExtendedData.ReqRes = NULL;
AllocFailExtendedData.AllocRes = NULL;
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE,
(EFI_IO_BUS_LPC | EFI_IOB_EC_RESOURCE_CONFLICT),
DevicePathData
);
}
//
// Set power for this ISA device
//
IsaAcpi->SetPower (IsaAcpi, IsaDevice, TRUE);
//
// Enable this ISA device
//
IsaAcpi->EnableDevice (IsaAcpi, IsaDevice, TRUE);
} while (TRUE);
return EFI_SUCCESS;
}
EFI_STATUS
EFIAPI
IsaBusControllerDriverStop (
IN EFI_DRIVER_BINDING_PROTOCOL * This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE * ChildHandleBuffer OPTIONAL
)
/*++
Routine Description:
This function tells the ISA Bus Driver to stop managing a PCI to ISA
Bridge controller.
Arguments:
This - The EFI_DRIVER_BINDING_PROTOCOL instance.
Controller - A handle to the device being stopped.
NumberOfChindren - The number of child device handles in ChildHandleBuffer.
ChildHandleBuffer - An array of child handles to be freed.
Returns:
EFI_SUCCESS - The device was stopped.
EFI_DEVICE_ERROR - The device could not be stopped due to a device error.
EFI_NOT_STARTED - The device has not been started.
EFI_INVALID_PARAMETER - One of the parameters has an invalid value.
EFI_OUT_OF_RESOURCES - The request could not be completed due to a lack of
resources.
--*/
{
EFI_STATUS Status;
UINTN Index;
BOOLEAN AllChildrenStopped;
ISA_IO_DEVICE *IsaIoDevice;
EFI_ISA_IO_PROTOCOL *IsaIo;
if (NumberOfChildren == 0) {
//
// Close the bus driver
//
Status = gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
if (EFI_ERROR (Status)) {
return Status;
}
Status = gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
if (EFI_ERROR (Status)) {
return Status;
}
Status = gBS->CloseProtocol (
Controller,
&gEfiIsaAcpiProtocolGuid,
This->DriverBindingHandle,
Controller
);
if (EFI_ERROR (Status)) {
return Status;
}
return EFI_SUCCESS;
}
//
// Complete all outstanding transactions to Controller.
// Don't allow any new transaction to Controller to be started.
//
//
// Stop all the children
// Find all the ISA devices that were discovered on this PCI to ISA Bridge
// with the Start() function.
//
AllChildrenStopped = TRUE;
for (Index = 0; Index < NumberOfChildren; Index++) {
Status = gBS->OpenProtocol (
ChildHandleBuffer[Index],
&gEfiIsaIoProtocolGuid,
(VOID **) &IsaIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (!EFI_ERROR (Status)) {
IsaIoDevice = ISA_IO_DEVICE_FROM_ISA_IO_THIS (IsaIo);
Status = gBS->UninstallMultipleProtocolInterfaces (
ChildHandleBuffer[Index],
&gEfiDevicePathProtocolGuid,
IsaIoDevice->DevicePath,
&gEfiIsaIoProtocolGuid,
&IsaIoDevice->IsaIo,
NULL
);
if (!EFI_ERROR (Status)) {
//
// Close the child handle
//
Status = gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
ChildHandleBuffer[Index]
);
gBS->FreePool (IsaIoDevice->DevicePath);
gBS->FreePool (IsaIoDevice);
}
}
if (EFI_ERROR (Status)) {
AllChildrenStopped = FALSE;
}
}
if (!AllChildrenStopped) {
return EFI_DEVICE_ERROR;
}
return EFI_SUCCESS;
}
//
// Internal Function
//
EFI_STATUS
IsaCreateDevice (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_PCI_IO_PROTOCOL *PciIo,
IN EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath,
IN EFI_ISA_ACPI_RESOURCE_LIST *IsaDeviceResourceList,
OUT EFI_DEVICE_PATH_PROTOCOL **ChildDevicePath
)
/*++
Routine Description:
Create ISA device found by IsaPnpProtocol
Arguments:
This - The EFI_DRIVER_BINDING_PROTOCOL instance.
Controller - The handle of ISA bus controller(PCI to ISA bridge)
PciIo - The Pointer to the PCI protocol
ParentDevicePath - Device path of the ISA bus controller
IsaDeviceResourceList - The resource list of the ISA device
ChildDevicePath - The pointer to the child device.
Returns:
EFI_SUCCESS - Create the child device.
EFI_OUT_OF_RESOURCES - The request could not be completed due to a lack of
resources.
EFI_DEVICE_ERROR - Can not create child device.
--*/
{
EFI_STATUS Status;
ISA_IO_DEVICE *IsaIoDevice;
EFI_DEV_PATH Node;
//
// Initialize the PCI_IO_DEVICE structure
//
IsaIoDevice = AllocateZeroPool (sizeof (ISA_IO_DEVICE));
if (IsaIoDevice == NULL) {
return EFI_OUT_OF_RESOURCES;
}
IsaIoDevice->Signature = ISA_IO_DEVICE_SIGNATURE;
IsaIoDevice->Handle = NULL;
IsaIoDevice->PciIo = PciIo;
//
// Initialize the ISA I/O instance structure
//
Status = InitializeIsaIoInstance (IsaIoDevice, IsaDeviceResourceList);
if (EFI_ERROR (Status)) {
gBS->FreePool (IsaIoDevice);
return Status;
}
//
// Build the child device path
//
Node.DevPath.Type = ACPI_DEVICE_PATH;
Node.DevPath.SubType = ACPI_DP;
SetDevicePathNodeLength (&Node.DevPath, sizeof (ACPI_HID_DEVICE_PATH));
Node.Acpi.HID = IsaDeviceResourceList->Device.HID;
Node.Acpi.UID = IsaDeviceResourceList->Device.UID;
IsaIoDevice->DevicePath = AppendDevicePathNode (
ParentDevicePath,
&Node.DevPath
);
if (IsaIoDevice->DevicePath == NULL) {
Status = EFI_DEVICE_ERROR;
goto Done;
}
*ChildDevicePath = IsaIoDevice->DevicePath;
//
// Create a child handle and attach the DevicePath,
// PCI I/O, and Controller State
//
Status = gBS->InstallMultipleProtocolInterfaces (
&IsaIoDevice->Handle,
&gEfiDevicePathProtocolGuid,
IsaIoDevice->DevicePath,
&gEfiIsaIoProtocolGuid,
&IsaIoDevice->IsaIo,
NULL
);
if (EFI_ERROR (Status)) {
goto Done;
}
Status = gBS->OpenProtocol (
Controller,
&gEfiPciIoProtocolGuid,
(VOID **) &PciIo,
This->DriverBindingHandle,
IsaIoDevice->Handle,
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
if (EFI_ERROR (Status)) {
gBS->UninstallMultipleProtocolInterfaces (
IsaIoDevice->Handle,
&gEfiDevicePathProtocolGuid,
IsaIoDevice->DevicePath,
&gEfiIsaIoProtocolGuid,
&IsaIoDevice->IsaIo,
NULL
);
}
Done:
if (EFI_ERROR (Status)) {
if (IsaIoDevice->DevicePath != NULL) {
gBS->FreePool (IsaIoDevice->DevicePath);
}
gBS->FreePool (IsaIoDevice);
}
return Status;
}