audk/ShellPkg/Library/UefiShellAcpiViewCommandLib/AcpiView.c

628 lines
17 KiB
C
Raw Normal View History

/** @file
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <Library/PrintLib.h>
#include <Library/UefiLib.h>
#include <Library/ShellLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/MemoryAllocationLib.h>
#include "AcpiParser.h"
#include "AcpiTableParser.h"
#include "AcpiView.h"
#include "UefiShellAcpiViewCommandLib.h"
EFI_HII_HANDLE gShellAcpiViewHiiHandle = NULL;
// Report variables
STATIC UINT32 mSelectedAcpiTable;
STATIC CONST CHAR16* mSelectedAcpiTableName;
STATIC BOOLEAN mSelectedAcpiTableFound;
STATIC EREPORT_OPTION mReportType;
STATIC UINT32 mTableCount;
STATIC UINT32 mBinTableCount;
STATIC BOOLEAN mVerbose;
STATIC BOOLEAN mConsistencyCheck;
STATIC BOOLEAN mColourHighlighting;
/**
An array of acpiview command line parameters.
**/
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
STATIC CONST SHELL_PARAM_ITEM ParamList[] = {
{L"/?", TypeFlag},
{L"-c", TypeFlag},
{L"-d", TypeFlag},
{L"-h", TypeValue},
{L"-l", TypeFlag},
{L"-s", TypeValue},
{L"-v", TypeFlag},
{NULL, TypeMax}
};
/**
This function returns the colour highlighting status.
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
@retval TRUE if colour highlighting is enabled.
**/
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
BOOLEAN
GetColourHighlighting (
VOID
)
{
return mColourHighlighting;
}
/**
This function sets the colour highlighting status.
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
@param Highlight The Highlight status.
**/
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
VOID
SetColourHighlighting (
BOOLEAN Highlight
)
{
mColourHighlighting = Highlight;
}
/**
This function returns the report options.
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
@retval Returns the report option.
**/
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
STATIC
EREPORT_OPTION
GetReportOption (
VOID
)
{
return mReportType;
}
/**
This function returns the selected ACPI table.
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
@retval Returns signature of the selected ACPI table.
**/
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
STATIC
UINT32
GetSelectedAcpiTable (
VOID
)
{
return mSelectedAcpiTable;
}
/**
This function dumps the ACPI table to a file.
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
@param [in] Ptr Pointer to the ACPI table data.
@param [in] Length The length of the ACPI table.
@retval TRUE Success.
@retval FALSE Failure.
**/
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
STATIC
BOOLEAN
DumpAcpiTableToFile (
IN CONST UINT8* Ptr,
IN CONST UINTN Length
)
{
EFI_STATUS Status;
CHAR16 FileNameBuffer[MAX_FILE_NAME_LEN];
SHELL_FILE_HANDLE DumpFileHandle;
UINTN TransferBytes;
DumpFileHandle = NULL;
TransferBytes = Length;
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
UnicodeSPrint (
FileNameBuffer,
sizeof (FileNameBuffer),
L".\\%s%04d.bin",
mSelectedAcpiTableName,
mBinTableCount++
);
Status = ShellOpenFileByName (
FileNameBuffer,
&DumpFileHandle,
EFI_FILE_MODE_READ | EFI_FILE_MODE_WRITE | EFI_FILE_MODE_CREATE,
0
);
if (EFI_ERROR (Status)) {
ShellPrintHiiEx (
-1,
-1,
NULL,
STRING_TOKEN (STR_GEN_READONLY_MEDIA),
gShellAcpiViewHiiHandle,
L"acpiview"
);
return FALSE;
}
Print (L"Dumping ACPI table to : %s ... ", FileNameBuffer);
Status = ShellWriteFile (
DumpFileHandle,
&TransferBytes,
(VOID*)Ptr
);
if (EFI_ERROR (Status)) {
Print (L"ERROR: Failed to dump table to binary file.\n");
TransferBytes = 0;
} else {
Print (L"DONE.\n");
}
ShellCloseFile (&DumpFileHandle);
return (Length == TransferBytes);
}
/**
This function processes the table reporting options for the ACPI table.
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
@param [in] Signature The ACPI table Signature.
@param [in] TablePtr Pointer to the ACPI table data.
@param [in] Length The length fo the ACPI table.
@retval Returns TRUE if the ACPI table should be traced.
**/
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
BOOLEAN
ProcessTableReportOptions (
IN CONST UINT32 Signature,
IN CONST UINT8* TablePtr,
IN CONST UINT32 Length
)
{
UINTN OriginalAttribute;
UINT8* SignaturePtr;
BOOLEAN Log;
BOOLEAN HighLight;
SignaturePtr = (UINT8*)(UINTN)&Signature;
Log = FALSE;
HighLight = GetColourHighlighting ();
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
switch (GetReportOption ()) {
case ReportAll:
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
Log = TRUE;
break;
case ReportSelected:
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
if (Signature == GetSelectedAcpiTable ()) {
Log = TRUE;
mSelectedAcpiTableFound = TRUE;
}
break;
case ReportTableList:
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
if (mTableCount == 0) {
if (HighLight) {
OriginalAttribute = gST->ConOut->Mode->Attribute;
gST->ConOut->SetAttribute (
gST->ConOut,
EFI_TEXT_ATTR(EFI_CYAN,
((OriginalAttribute&(BIT4|BIT5|BIT6))>>4))
);
}
Print (L"\nInstalled Table(s):\n");
if (HighLight) {
gST->ConOut->SetAttribute (gST->ConOut, OriginalAttribute);
}
}
Print (
L"\t%4d. %c%c%c%c\n",
++mTableCount,
SignaturePtr[0],
SignaturePtr[1],
SignaturePtr[2],
SignaturePtr[3]
);
break;
case ReportDumpBinFile:
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
if (Signature == GetSelectedAcpiTable ()) {
mSelectedAcpiTableFound = TRUE;
DumpAcpiTableToFile (TablePtr, Length);
}
break;
case ReportMax:
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
// We should never be here.
// This case is only present to prevent compiler warning.
break;
} // switch
if (Log) {
if (HighLight) {
OriginalAttribute = gST->ConOut->Mode->Attribute;
gST->ConOut->SetAttribute (
gST->ConOut,
EFI_TEXT_ATTR(EFI_LIGHTBLUE,
((OriginalAttribute&(BIT4|BIT5|BIT6))>>4))
);
}
Print (
L"\n\n --------------- %c%c%c%c Table --------------- \n\n",
SignaturePtr[0],
SignaturePtr[1],
SignaturePtr[2],
SignaturePtr[3]
);
if (HighLight) {
gST->ConOut->SetAttribute (gST->ConOut, OriginalAttribute);
}
}
return Log;
}
/**
This function converts a string to ACPI table signature.
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
@param [in] Str Pointer to the string to be converted to the
ACPI table signature.
@retval The ACPI table signature.
**/
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
STATIC
UINT32
ConvertStrToAcpiSignature (
IN CONST CHAR16* Str
)
{
UINT8 Index;
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
CHAR8 Ptr[4];
ZeroMem (Ptr, sizeof (Ptr));
Index = 0;
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
// Convert to Upper case and convert to ASCII
while ((Index < 4) && (Str[Index] != 0)) {
if (Str[Index] >= L'a' && Str[Index] <= L'z') {
Ptr[Index] = (CHAR8)(Str[Index] - (L'a' - L'A'));
} else {
Ptr[Index] = (CHAR8)Str[Index];
}
Index++;
}
return *(UINT32*)Ptr;
}
/**
This function iterates the configuration table entries in the
system table, retrieves the RSDP pointer and starts parsing the ACPI tables.
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
@param [in] SystemTable Pointer to the EFI system table.
@retval Returns EFI_NOT_FOUND if the RSDP pointer is not found.
Returns EFI_UNSUPPORTED if the RSDP version is less than 2.
Returns EFI_SUCCESS if successful.
**/
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
STATIC
EFI_STATUS
EFIAPI
AcpiView (
IN EFI_SYSTEM_TABLE* SystemTable
)
{
EFI_STATUS Status;
UINTN Index;
EFI_CONFIGURATION_TABLE* EfiConfigurationTable;
BOOLEAN FoundAcpiTable;
UINTN OriginalAttribute;
UINTN PrintAttribute;
EREPORT_OPTION ReportOption;
UINT8* RsdpPtr;
UINT32 RsdpLength;
UINT8 RsdpRevision;
PARSE_ACPI_TABLE_PROC RsdpParserProc;
BOOLEAN Trace;
// Search the table for an entry that matches the ACPI Table Guid
FoundAcpiTable = FALSE;
for (Index = 0; Index < SystemTable->NumberOfTableEntries; Index++) {
if (CompareGuid (&gEfiAcpiTableGuid,
&(SystemTable->ConfigurationTable[Index].VendorGuid))) {
EfiConfigurationTable = &SystemTable->ConfigurationTable[Index];
FoundAcpiTable = TRUE;
break;
}
}
if (FoundAcpiTable) {
RsdpPtr = (UINT8*)EfiConfigurationTable->VendorTable;
// The RSDP revision is 1 byte starting at offset 15
RsdpRevision = *(RsdpPtr + RSDP_REVISION_OFFSET);
if (RsdpRevision < 2) {
Print (
L"ERROR: RSDP version less than 2 is not supported.\n"
);
return EFI_UNSUPPORTED;
}
// The RSDP length is 4 bytes starting at offset 20
RsdpLength = *(UINT32*)(RsdpPtr + RSDP_LENGTH_OFFSET);
Trace = ProcessTableReportOptions (RSDP_TABLE_INFO, RsdpPtr, RsdpLength);
Status = GetParser (RSDP_TABLE_INFO, &RsdpParserProc);
if (EFI_ERROR (Status)) {
Print (
L"ERROR: No registered parser found for RSDP.\n"
);
return Status;
}
RsdpParserProc (
Trace,
RsdpPtr,
RsdpLength,
RsdpRevision
);
} else {
IncrementErrorCount ();
Print (
L"ERROR: Failed to find ACPI Table Guid in System Configuration Table.\n"
);
return EFI_NOT_FOUND;
}
ReportOption = GetReportOption ();
if (ReportTableList != ReportOption) {
if (((ReportSelected == ReportOption) ||
(ReportDumpBinFile == ReportOption)) &&
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
(!mSelectedAcpiTableFound)) {
Print (L"\nRequested ACPI Table not found.\n");
} else if (ReportDumpBinFile != ReportOption) {
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
OriginalAttribute = gST->ConOut->Mode->Attribute;
Print (L"\nTable Statistics:\n");
if (GetColourHighlighting ()) {
PrintAttribute = (GetErrorCount () > 0) ?
EFI_TEXT_ATTR (
EFI_RED,
((OriginalAttribute&(BIT4|BIT5|BIT6))>>4)
) :
OriginalAttribute;
gST->ConOut->SetAttribute (gST->ConOut, PrintAttribute);
}
Print (L"\t%d Error(s)\n", GetErrorCount ());
if (GetColourHighlighting ()) {
PrintAttribute = (GetWarningCount () > 0) ?
EFI_TEXT_ATTR (
EFI_RED,
((OriginalAttribute&(BIT4|BIT5|BIT6))>>4)
) :
OriginalAttribute;
gST->ConOut->SetAttribute (gST->ConOut, PrintAttribute);
}
Print (L"\t%d Warning(s)\n", GetWarningCount ());
if (GetColourHighlighting ()) {
gST->ConOut->SetAttribute (gST->ConOut, OriginalAttribute);
}
}
}
return EFI_SUCCESS;
}
/**
Function for 'acpiview' command.
@param[in] ImageHandle Handle to the Image (NULL if Internal).
@param[in] SystemTable Pointer to the System Table (NULL if Internal).
**/
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
SHELL_STATUS
EFIAPI
ShellCommandRunAcpiView (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE* SystemTable
)
{
EFI_STATUS Status;
SHELL_STATUS ShellStatus;
LIST_ENTRY* Package;
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
CHAR16* ProblemParam;
CONST CHAR16* Temp;
CHAR8 ColourOption[8];
SHELL_FILE_HANDLE TmpDumpFileHandle;
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
// Set Defaults
mReportType = ReportAll;
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
mTableCount = 0;
mBinTableCount = 0;
mSelectedAcpiTable = 0;
mSelectedAcpiTableName = NULL;
mSelectedAcpiTableFound = FALSE;
mVerbose = TRUE;
mConsistencyCheck = TRUE;
ShellStatus = SHELL_SUCCESS;
Package = NULL;
TmpDumpFileHandle = NULL;
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
// Reset The error/warning counters
ResetErrorCount ();
ResetWarningCount ();
Status = ShellCommandLineParse (ParamList, &Package, &ProblemParam, TRUE);
if (EFI_ERROR (Status)) {
if (Status == EFI_VOLUME_CORRUPTED && ProblemParam != NULL) {
ShellPrintHiiEx (
-1,
-1,
NULL,
STRING_TOKEN (STR_GEN_PROBLEM),
gShellAcpiViewHiiHandle,
L"acpiview",
ProblemParam
);
FreePool (ProblemParam);
} else {
Print (L"acpiview: Error processing input parameter(s)\n");
}
ShellStatus = SHELL_INVALID_PARAMETER;
} else {
if (ShellCommandLineGetCount (Package) > 1) {
ShellPrintHiiEx (
-1,
-1,
NULL,
STRING_TOKEN (STR_GEN_TOO_MANY),
gShellAcpiViewHiiHandle,
L"acpiview"
);
ShellStatus = SHELL_INVALID_PARAMETER;
} else if (ShellCommandLineGetFlag (Package, L"-?")) {
ShellPrintHiiEx (
-1,
-1,
NULL,
STRING_TOKEN (STR_GET_HELP_ACPIVIEW),
gShellAcpiViewHiiHandle,
L"acpiview"
);
} else if (ShellCommandLineGetFlag (Package, L"-s") &&
ShellCommandLineGetValue (Package, L"-s") == NULL) {
ShellPrintHiiEx (
-1,
-1,
NULL,
STRING_TOKEN (STR_GEN_NO_VALUE),
gShellAcpiViewHiiHandle,
L"acpiview",
L"-s"
);
ShellStatus = SHELL_INVALID_PARAMETER;
} else if ((ShellCommandLineGetFlag (Package, L"-s") &&
ShellCommandLineGetFlag (Package, L"-l"))) {
ShellPrintHiiEx (
-1,
-1,
NULL,
STRING_TOKEN (STR_GEN_TOO_MANY),
gShellAcpiViewHiiHandle,
L"acpiview"
);
ShellStatus = SHELL_INVALID_PARAMETER;
} else if (ShellCommandLineGetFlag (Package, L"-h") &&
ShellCommandLineGetValue (Package, L"-h") == NULL) {
ShellPrintHiiEx (
-1,
-1,
NULL,
STRING_TOKEN (STR_GEN_NO_VALUE),
gShellAcpiViewHiiHandle,
L"acpiview",
L"-h"
);
ShellStatus = SHELL_INVALID_PARAMETER;
} else if (ShellCommandLineGetFlag (Package, L"-d") &&
!ShellCommandLineGetFlag (Package, L"-s")) {
ShellPrintHiiEx (
-1,
-1,
NULL,
STRING_TOKEN (STR_GEN_MISSING_OPTION),
gShellAcpiViewHiiHandle,
L"acpiview",
L"-s",
L"-d"
);
ShellStatus = SHELL_INVALID_PARAMETER;
} else {
// Check if the colour option is set
Temp = ShellCommandLineGetValue (Package, L"-h");
if (Temp != NULL) {
UnicodeStrToAsciiStrS (Temp, ColourOption, sizeof (ColourOption));
if ((AsciiStriCmp (ColourOption, "ON") == 0) ||
(AsciiStriCmp (ColourOption, "TRUE") == 0)) {
SetColourHighlighting (TRUE);
} else if ((AsciiStriCmp (ColourOption, "OFF") == 0) ||
(AsciiStriCmp (ColourOption, "FALSE") == 0)) {
SetColourHighlighting (FALSE);
}
}
if (ShellCommandLineGetFlag (Package, L"-l")) {
mReportType = ReportTableList;
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
} else {
mSelectedAcpiTableName = ShellCommandLineGetValue (Package, L"-s");
if (mSelectedAcpiTableName != NULL) {
mSelectedAcpiTable = (UINT32)ConvertStrToAcpiSignature (
mSelectedAcpiTableName
);
mReportType = ReportSelected;
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
if (ShellCommandLineGetFlag (Package, L"-d")) {
// Create a temporary file to check if the media is writable.
CHAR16 FileNameBuffer[MAX_FILE_NAME_LEN];
mReportType = ReportDumpBinFile;
ShellPkg: Add acpiview tool to dump ACPI tables This program is provided to allow examination of ACPI table contents from the UEFI Shell. This can help with investigations, especially at that stage where the tables are not enabling an OS to boot. The program is not exhaustive, and only encapsulates detailed knowledge of a limited number of table types. Default behaviour is to display the content of all tables installed. 'Known' table types will be parsed and displayed with descriptions and field values. Where appropriate a degree of consistency checking is done and errors may be reported in the output. Other table types will be displayed as an array of Hexadecimal bytes. To facilitate debugging, the -s and -d options can be used to generate a binary file image of a table that can be copied elsewhere for investigation using tools such as those provided by acpica.org. This is especially relevant for AML type tables like DSDT and SSDT. The inspiration for this is the existing smbiosview Debug1 Shell command. Many tables are not explicitly handled, in part because no examples are available for our testing. The program is designed to be extended to new tables with minimal effort, and contributions are invited. Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Evan Lloyd <evan.lloyd@arm.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-04-20 10:08:22 +02:00
UnicodeSPrint (
FileNameBuffer,
sizeof (FileNameBuffer),
L".\\%s%04d.tmp",
mSelectedAcpiTableName,
mBinTableCount
);
Status = ShellOpenFileByName (
FileNameBuffer,
&TmpDumpFileHandle,
EFI_FILE_MODE_READ | EFI_FILE_MODE_WRITE |
EFI_FILE_MODE_CREATE,
0
);
if (EFI_ERROR (Status)) {
ShellStatus = SHELL_INVALID_PARAMETER;
TmpDumpFileHandle = NULL;
ShellPrintHiiEx (
-1,
-1,
NULL,
STRING_TOKEN (STR_GEN_READONLY_MEDIA),
gShellAcpiViewHiiHandle,
L"acpiview"
);
goto Done;
}
// Delete Temporary file.
ShellDeleteFile (&TmpDumpFileHandle);
} // -d
} // -s
}
// Parse ACPI Table information
Status = AcpiView (SystemTable);
if (EFI_ERROR (Status)) {
ShellStatus = SHELL_NOT_FOUND;
}
}
}
Done:
if (Package != NULL) {
ShellCommandLineFreeVarList (Package);
}
return ShellStatus;
}